Search

Polylactic acid (PLA) is one of the main components of biodegradable and biocompatible composites. Bacterial cellulose from kombucha membranes is an excellent candidate to be used as a natural filler of eco-composites because it is renewable, has low cost, low density, and acceptable specific strength properties, and is biodegradable. The study aimed to prepare composites of PLA and bacterial cellulose to produce a biodegradable and compostable material. The bacterial microcellulose was obtained from kombucha membranes and blended with PLA by extrusion. The composites contained a PLA with 1%, 3%, and 5% of cellulose. We characterized the PLA, bacterial microcellulose, and composites to ascertain their size and aspect, degree of crystallinity, distribution of the cellulose into PLA, and their mechanical properties. We observed an increase in crystallinity proportional to the cellulose content for the blends and found that the 3% cellulose blend withstands the stress of up to 40 MPa and temperatures up to 120°C before distortion.

Biocomposite development, as a sustainable alternative to fossil-derived materials with diverse industrial applications, requires expediting the design process and reducing production costs. Simulation methods offer a solution to these challenges. The main aspects to consider in simulating composite materials successfully include accurately representing microstructure geometry, carefully selecting mesh elements, establishing appropriate boundary conditions representing system forces, utilizing an efficient numerical method to accelerate simulations, and incorporating statistical tools like experimental designs and re-regression models. This study proposes a comprehensive methodology encompassing these aspects. We present the simulation using a numerical homogenization technique based on FEM to analyze the mechanical behavior of a composite material of a polyhydroxybutyrate (PHB) biodegradable matrix reinforced with cylindrical inclusions of flax and kenab. Here, the representative volume element (RVE) considered the geometry, and the numerical homogenization method (NHM) calculated the macro-mechanical behavior of composites. The results were validated using the asymptotic homogenization method (AHM) and experimental data, with error estimations of 0.0019% and 7%, respectively. This model is valuable for predicting longitudinal and transverse elastic moduli, shear modulus, and Poisson's coefficient, emphasizing its significance in composite materials research. [ABSTRACT FROM AUTHOR]

Preparation of cellulose nanowhiskers (CNWs) has grown significantly because they are useful for a wide range of applications. Additional advantage in their design requires that they meet the following characteristics: nontoxicity, abundance, sustainability, renewability, and low cost. To address these requirements, nanowhiskers were prepared from Opuntia ficus-indica (nopal) cellulose by acid hydrolysis. Monitoring the process of CNWs preparation is necessary to ensure maximum yield and purity of the end product. In this study, the cellulose preparation was monitored by analyzing microscopic morphology by SEM; the purity degree was determined by fluorescence microscopy as a novel and rapid technique, and FTIR spectroscopy was used for confirmation. The additional parameters that monitored the process were the crystallinity index by X-ray diffraction and the size of the particle by dynamic light scattering (DLS). Nopal cellulose was found to be comparable to commercial microcrystalline cellulose. The use of Opuntia ficus-indica is a viable alternative for the production of highly pure CNWs and the strategy to supervise the preparation process was rapid. [ABSTRACT FROM AUTHOR]

The present work focuses on the synthesis of a vanadium nitride (VN)/carbon nanocomposite material via the thermal decomposition of vanadyl phthalocyanine (VOPC). The morphology and chemical structure of the synthesized compounds were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), Fourier transformed infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray photoemission spectroscopy (XPS). The successful syntheses of the VOPC and non-metalated phthalocyanine (H 2 PC) precursors were confirmed using FTIR and XRD. The VN particles present a needle-like morphology in the VN synthesized by the sol-gel method. The morphology of the VN/C composite material exhibited small clusters of VN particles. The XRD analysis of the thermally decomposed VOPC indicated a mixture of amorphous carbon and VN nanoparticles (VN(TD)) with a cubic structure in the space group FM-3M consistent with that of VN. The XPS results confirmed the presence of V(III)-N bonds in the resultant material, indicating the formation of a VN/C nanocomposite. The VN/C nanocomposite synthesized through thermal decomposition exhibited a high carbon content and a cluster-like distribution of VN particles. The VN/C nanocomposite was used as an anode material in LIBs, which delivered a specific capacity of 307 mAh g -1 after 100 cycles and an excellent Coulombic efficiency of 99.8 at the 100th cycle.