Search

In aquatic systems, some substances considered as endocrine disruptors have been detected, which can be due to their incomplete elimination in wastewater treatment plants (WWTPs) and inadequate disposal of pharmaceuticals. Among these contaminants are 17α-ethinylestradiol (EE2) and caffeine (CAF). Moreover, it has been reported that this kind of contaminants may provoke different adverse effects in many aquatic organisms. Because of that, in the present study, up-flow anaerobic sludge blanket reactors (UASB) coupled with the Fenton process was evaluated for EE2 and CAF removal spiked in wastewater samples. First, the best reaction conditions were established in each process. For UASB reactor, two hydraulic retention times (HRT 8 and 24 h) were evaluated, achieving the highest chemical organic demand (COD) removal (70 %) and drug elimination (84 %–86 %) with HRT 24 h. Subsequently, Fenton process was conducted at pH 3 with different levels of Fe2+ (0.05–0.5 mmol/L) and molar ratios Fe2+:H2O2 (1:1–1:10). Better results were obtained with 0.5 mmol Fe2+/L, and 1:10 ratio molar Fe2+:H2O2. Finally, UASB-Fenton coupled system allowed 80 % of COD decrease, almost complete removal of drugs and the toxicity of samples on Vibrio fischeri was reduced from 73 % to 30 %, demonstrating that this coupled system is a promising and efficient system for pharmaceutical compounds removal from wastewater. [ABSTRACT FROM AUTHOR]

Non-steroidal anti-inflammatory drugs (NSAID) are compounds frequently found in municipal wastewater and their degradation by conventional wastewater treatment plants (WWTP) is generally incomplete. This study compared the efficiency of two advanced oxidation processes (AOP), namely heterogeneous photocatalysis (HP) and electro-Fenton (EF), in the degradation of a mixture of common NSAID (diclofenac, ibuprofen and naproxen) dissolved in either deionized water or effluent from a WWTP. Both processes were effective in degrading the NSAID mixture and the trend of degradation was as follows, diclofenac > naproxen > ibuprofen. EF with a current density of 40 mA cm−2 and 0.3 mmol Fe2+ L−1 was the most efficient process to mineralize the organic compounds, achieving up to 92% TOC removal in deionized water and 90% in the WWTP effluent after 3 h of reaction. HP with 1.4 g TiO2 L−1 at pH 7 under sunlight, produced 85% TOC removal in deionized water and 39% in WWTP effluent also after 3 h treatment. The lower TOC removal efficiency shown by HP with the WWTP effluent was attributed mainly to the scavenging of reactive species by background organic matter in the wastewater. On the contrary, inorganic ions in the wastewater may produce oxidazing species during the EF process, which contributes to a higher degradation efficiency. EF is a promising option for the treatment of anti-inflammatory pharmaceuticals in municipal WWTP at competitive electrical energy efficiencies. [ABSTRACT FROM AUTHOR]

Photocatalytic degradation of p-Cresol was evaluated using the mixed oxide Bi2O3/TiO2 (containing 2 and 20% wt. Bi2O3 referred as TB2 and TB20) and was compared with bare TiO2 under simulated solar radiation. Materials were prepared by the classic sol-gel method. All solids exhibited the anatase phase by X-ray diffraction (XRD) and Raman spectroscopy. The synthesized materials presented lower crystallite size and Eg value, and also higher surface area as Bi2O3 amount was increased. Bi content was quantified showing near to 70% of theoretical values in TB2 and TB20. Bi2O3 incorporation also was demonstrated by X-ray photoelectron spectroscopy (XPS). Characterization of mixed oxides suggests a homogeneous distribution of Bi2O3 on TiO2 surface. Photocatalytic tests were carried out using a catalyst loading of 1 g L−1 under simulated solar light and visible light. The incorporation of Bi2O3 in TiO2 improved the photocatalytic properties of the synthesized materials obtaining better results with TB20 than the unmodified TiO2 under both radiation sources. [ABSTRACT FROM AUTHOR]

Iron in the +6 oxidation state [Fe(VI)] is an environmentally friendly oxidant that can be used in water disinfection and wastewater treatment. The reduction potential of ferrate ion [Fe(VI)] in acidic pH is higher (2.20 V) than in basic condition (0.70 V). The electrochemical synthesis of ferrate ion in perchloric acid solution was carried out over inert electrode of boron doped diamond, using FeSO4 solution at low concentration. The ferrate ion electrochemically generated in situ was directly applied to promote the decolourization of two synthetic azo dyes, Acid Yellow 36 and Methyl Orange. [ABSTRACT FROM AUTHOR]