Search

The article presents indicators of the hydropower potential of Kyrgyzstan, shows the share of small hydropower plants in the production of electric energy in the energy sector of the republic, reveals the problematic issues that need to be revealed in this work. A brief description of the existing automatic voltage regulation system and automatic field blanking system is given. Based on the analysis of existing systems, their shortcomings were identified and the main functions formulated for automatic voltage regulation systems in both static and dynamic modes associated with starting and stopping the generator, loading and dumping, as well as protective measures taken to ensure reliability operation of the hydraulic unit. The result of the research is the development of the main functional blocks in the system of automatic voltage regulation with a thyristor pathogen and a brief explanation of their work. The synthesis technique of the excitation current regulator of a synchronous generator and the main indicators obtained in the modernization process are shown. In conclusion, all the functions inherent in the modernized system for automatically controlling the excitation of a synchronous generator, aimed at the safe operation of the hydraulic unit, are noted.

The paper analyses the global demand for various energy resources in recent years. Nowadays, qualitative and quantitative changes in structure of distribution and consumption of energy resources take place. The paper has reviewed a number of papers predicting two-fold increase in the global energy production market by 2040. A number of other papers also predict the shift of energy demand from the USA and EU countries to the Asian market. The paper presents percentage distribution of world’s energy requirements satisfied by the six types of resources among which oil, gas, and coil are still predominant. Some papers have stated that the demand for natural gas will continue to grow faster than the demand for oil or coil in the future. To confirm or deny this theory the authors have designed the mathematical model showing trends in demand for gas compared to the total demand for oil and coal; as a result, two different polynomial functions have been obtained with almost the same probability confirming this prediction. Trends in energy production and change of global energy demand across regions over the past twenty years have been studied. The studies show that, in general, energy production has been increased for the last decade. However, due to economic crises fluctuations, energy production in EU countries has abruptly decreased; it results in displacement of the EU countries from the market by the countries of the Middle East and the Near East. The paper also notes such important factors as decrease in solid fuel production in Great Britain; steady increasing importance of renewable energy sources for the last few years; reducing of the rate of nuclear energy development by some key countries; general lack of energy recourses in EU countries, etc.

The article discusses the possibility of using data from smart electricity meters (SEM) to increase the accuracy of calculation losses in 0.4 kV low-voltage networks. An increase in accuracy can be achieved using actual data about the load graph of electricity consumers (in this case, 6(10)-0.4 kV transformer substations are meant). To date, the operating load factor is taken equal to 0.5, which does not always correspond to the actual data. Using SEM, actual load graphs can be obtained, which enable more accurate determination of the operating load factor. Consequently, the accuracy of calculation of electrical energy losses will be increased.

Damping load vibrations in an electric crane drive is an urgent topic for research. The swinging load has a negative effect on the mechanical part of the device, leading to its wear, and on the entire control system as a whole. To combat the swaying of the load, it is proposed to install a vibration damping block created on the basis of an equation describing the dependence of the change in the deviation of the load on the equilibrium position in the plane of movement of the cart. The control signals in the vibration damping unit are the parameters of truck acceleration, suspension length, and weight of the load. At the output of the vibration damping unit, a speed task is formed. A block diagram of the trolley drive control system has been developed. Both scalar systems and systems with direct torque control are used on trolley travel mechanisms. The paper analyzes the efficiency of using the vibration damping unit when using different control systems on the movement mechanism of the bridge crane trolley.