Search

SRON (Netherlands Institute for Space Research) is developing the Focal Plane Assembly (FPA) for Athena X-IFU, whose Demonstration Model (DM) will use for the first time a time domain multiplexing (TDM)-based readout system for the on-board transition-edge sensors (TES). We report on the characterization activities on a TDM setup provided by NASA Goddard Space Flight Center (GSFC) and National Institute for Standards and Technology (NIST) and tested in SRON cryogenic test facilities. The goal of these activities is to study the impact of the longer harness, closer to X-IFU specs, in a different EMI environment and switching from a single-ended to a differential readout scheme. In this contribution we describe the advancement in the debugging of the system in the SRON cryostat, which led to the demonstration of the nominal spectral performance of 2.8 eV at 5.9~keV with 16-row multiplexing, as well as an outlook for the future endeavours for the TDM readout integration on X-IFU's FPA-DM at SRON., Comment: Under publication in Journal of Low Temperature Physics

The X-IFU is the cryogenic spectrometer onboard the future ATHENA X-ray observatory. It is based on a large array of TES microcalorimeters, which works in combination with a Cryogenic AntiCoincidence detector (CryoAC). This is necessary to reduce the particle background level thus enabling part of the mission science goals. Here we present the first joint test of X-IFU TES array and CryoAC Demonstration Models, performed in a FDM setup. We show that it is possible to operate properly both detectors, and we provide a preliminary demonstration of the anti-coincidence capability of the system achieved by the simultaneous detection of cosmic muons., Comment: Accepted for publication in the Journal of Low Temperature Physics for LTD-19 special issue

Magnetic skyrmions are well-suited for encoding information because they are nano-sized, topologically stable, and only require ultra-low critical current densities $j_c$ to depin from the underlying atomic lattice. Above $j_c$ skyrmions exhibit well-controlled motion, making them prime candidates for race-track memories. In thin films thermally-activated creep motion of isolated skyrmions was observed below $j_c$ as predicted by theory. Uncontrolled skyrmion motion is detrimental for race-track memories and is not fully understood. Notably, the creep of skyrmion lattices in bulk materials remains to be explored. Here we show using resonant ultrasound spectroscopy--a probe highly sensitive to the coupling between skyrmion and atomic lattices--that in the prototypical skyrmion lattice material MnSi depinning occurs at $j_c^*$ that is only 4 percent of $j_c$. Our experiments are in excellent agreement with Anderson-Kim theory for creep and allow us to reveal a new dynamic regime at ultra-low current densities characterized by thermally-activated skyrmion-lattice-creep with important consequences for applications., Comment: 28 pages, 4+4 figures, 1 table. arXiv admin note: substantial text overlap with arXiv:1711.08873

Frequency domain multiplexing (FDM) is the baseline readout system for the X-ray Integral Field Unit (X-IFU) on board the Athena mission. Under the FDM scheme, TESs are coupled to a passive LC filter and biased with alternating current (AC bias) at MHz frequencies. Using high-quality factor LC filters and room temperature electronics developed at SRON and low-noise two-stage SQUID amplifiers provided by VTT, we have recently demonstrated good performance with the FDM readout of Mo/Au TES calorimeters with Au/Bi absorbers. We have achieved a performance requested for the demonstration model (DM) with the single pixel AC bias ($\Delta E=$1.8 eV) and 9 pixel multiplexing ($\Delta E=$2.6 eV) modes. We have also demonstrated 14-pixel multiplexing with an average energy resolution of 3.3 eV, which is limited by non-fundamental issues related to FDM readout in our lab setup., Comment: 7 pages, 5 figures. Published on Journal of Low Temperature Physics (2020)

We report on the development of multi-absorber transition edge sensors (TESs), referred to as hydras. A hydra consists of multiple x-ray absorbers each with a different thermal conductance to a TES. Position information is encoded in the pulse shape. With some trade-off in performance, hydras enable very large format arrays without the prohibitive increase in bias and read-out components associated with arrays of individual TESs. Hydras are under development for the next generation of space telescope such as Lynx. Lynx is a NASA concept under study that will combine a < 1 arcsecond angular resolution optic with 100,000-pixel microcalorimeter array with energy resolution of deltaE_FWHM ~ 3 eV in the soft x-ray energy range. We present first results from hydras with 25-pixels for Lynx. Designs with absorbers on a 25 micron and 50 micron pitch are studied. Arrays incorporate, for the first time, microstrip buried wiring layers of suitable pitch and density required to readout a full-scale Lynx array. The resolution from the coadded energy histogram including all 25-pixels was deltaE_FWHM = 1.66+/-0.02 eV and 3.34+/-0.06 eV at an energy of 1.5 keV for the 25 micron and 50 micron absorber designs respectively. Position discrimination is demonstrated from parameterization of the rise-time., Comment: 7 pages, 5 figures. Low Temperature Detectors 18 Conference, Milan Italy

Controlled movement of nano-scale stable magnetic objects has been proposed as the foundation for a new generation of magnetic storage devices. Magnetic skyrmions, vortex-like spin textures stabilized by their topology are particularly promising candidates for this technology. Their nanometric size and ability to be displaced in response to an electrical current density several orders of magnitude lower than required to induce motion of magnetic domain walls suggest their potential for high-density memory devices that can be operated at low power. However, to achieve this, skyrmion movement needs to be controlled, where a key question concerns the coupling of skyrmions with the underlying atomic lattice and disorder (pinning). Here, we use Resonant Ultrasound Spectroscopy (RUS), a probe highly sensitive to changes in the elastic properties, to shed new light on skyrmion elasticity and depinning in the archetypal skyrmion material MnSi. In MnSi, skyrmions form a lattice that leads to pronounced changes in the elastic properties of the atomic lattice as a result of magneto-crystalline coupling. Without an applied current, the shear and compressional moduli of the underlying crystal lattice exhibit an abrupt change in the field-temperature range where skyrmions form. For current densities exceeding $j_c^*$ the changes of elastic properties vanish, signaling the decoupling of skyrmion and atomic lattices. Interestingly, $j_c^*$, which we identify as the onset of skyrmion depinning, is about 20 times smaller than $j_c$ previously measured via non-linear Hall effect. Our results suggest the presence of a previously-undetected intermediate dynamic regime possibly dominated by skyrmion-creep motion with important consequences for potential applications., Comment: 7+4 pages, 4+3 figures, 0+1 table

Applied pressure drives the heavy-fermion antiferromagnet CeRhIn$_{5}$ towards a quantum critical point that becomes hidden by a dome of unconventional superconductivity. Magnetic fields suppress this superconducting dome, unveiling the quantum phase transition of local character. Here, we show that $5\%$ magnetic substitution at the Ce site in CeRhIn$_{5}$, either by Nd or Gd, induces a zero-field magnetic instability inside the superconducting state. This magnetic state not only should have a different ordering vector than the high-field local-moment magnetic state, but it also competes with the latter, suggesting that a spin-density-wave phase is stabilized in zero field by Nd and Gd impurities - similarly to the case of Ce$_{0.95}$Nd$_{0.05}$CoIn$_{5}$. Supported by model calculations, we attribute this spin-density wave instability to a magnetic-impurity driven condensation of the spin excitons that form inside the unconventional superconducting state.

There has been considerable interest in topological semi-metals that exhibit extreme magnetoresistance (XMR). These have included materials lacking inversion symmetry such as TaAs, as well Dirac semi-metals such as Cd3As2. However, it was reported recently that LaSb and LaBi also exhibit XMR, even though the rock-salt structure of these materials has inversion symmetry, and the band-structure calculations do not show a Dirac dispersion in the bulk. Here, we present magnetoresistance and specific heat measurements on NdSb, which is isostructural with LaSb. NdSb has an antiferromagnetic groundstate, and in analogy with the lanthanum monopnictides, is expected to be a topologically non-trivial semi-metal. We show that NdSb has an XMR of 10^4 %, even within the AFM state, illustrating that XMR can occur independently of the absence of time reversal symmetry breaking in zero magnetic field. The persistence of XMR in a magnetic system offers promise of new functionality when combining topological matter with electronic correlations. We also find that in an applied magnetic field below the Neel temperature there is a first order transition, consistent with evidence from previous neutron scattering work., Comment: 5 pages, 6 figures

We report the synthesis, crystal structure and characterization by means of single crystal x-ray diffraction, neutron powder diffraction, magnetic, thermal and transport measurements of the new heavy fermion compounds Ce$_{2}$MAl$_{7}$Ge$_{4}$ (M = Co, Ir, Ni, Pd). These compounds crystallize in a noncentrosymmetic tetragonal space group P\={4}2$_{1}$m, consisting of layers of square nets of Ce atoms separated by Ge-Al and M-Al-Ge blocks. Ce$_{2}$CoAl$_{7}$Ge$_{4}$, Ce$_{2}$IrAl$_{7}$Ge$_{4}$ and Ce$_{2}$NiAl$_{7}$Ge$_{4}$ order magnetically behavior below $T_{M}=$ 1.8, 1.6, and 0.8 K, respectively. There is no evidence of magnetic ordering in Ce$_{2}$PdAl$_{7}$Ge$_{4}$ down to 0.4 K. The small amount of entropy released in the magnetic state of Ce$_{2}$MAl$_{7}$Ge$_{4}$ (M = Co, Ir, Ni) and the reduced specific heat jump at $T_M$ suggest a strong Kondo interaction in these materials. Ce$_{2}$PdAl$_{7}$Ge$_{4}$ shows non-Fermi liquid behavior, possibly due to the presence of a nearby quantum critical point., Comment: To appear in Phys. Rev. B

The resistance of a metal in a magnetic field can be very illuminating about its ground state. Some famous examples include the integer and fractional quantum Hall effects\cite{Klitzing-QHE,Tsui-FQHE}, Shubnikov-de Haas oscillations\cite{SdH}, and weak localization\cite{Lee-WL} \emph{et al}. In non-interacting metals the resistance typically increases upon the application of a magnetic field\cite{Pippard-MR}. In contrast, in some special circumstances metals, with anisotropic Fermi surfaces\cite{Kikugawa-PdCoO2LMR} or a so-called Weyl semimetal for instance\cite{Nielsen-ABJ,Son-ChirAnom}, may have negative magnetoresistance. Here we show that semimetallic TaAs$_2$ possesses a gigantic negative magnetoresistance ($-$98\% in a field of 3 T at low temperatures), with an unknown mechanism. Density functional calculations illustrate that TaAs$_2$ is a new topological semimetal [$\mathbb{Z}_2$ invariant (0;111)] without a Dirac dispersion. This demonstrates that the presence of negative magnetoresistance in non-magnetic semimetals cannot be uniquely attributed to the Adler-Bell-Jackiw anomaly of bulk Dirac/Weyl fermions. Our results also imply that the OsGe$_2$-type monoclinic dipnictides are likely a material basis where unconventional topological semimetals may be found., Comment: 17+9 pages, 4+4 figures, 1+1 tables

Motivated by the search for design principles of rare-earth-free strong magnets, we present a study of electronic structure and magnetic properties of the ferromagnetic metal Fe3GeTe2 within local density approximation (LDA) of the density functional theory, and its combination with dynamical mean-field theory (DMFT). For comparison to these calculations, we have measured magnetic and thermodynamic properties as well as X-ray magnetic circular dichroism and the photoemission spectrum of single crystal Fe3GeTe2. We find that the experimentally determined Sommerfeld coefficient is enhanced by an order of magnitude with respect to the LDA value. This enhancement can be partially explained by LDA+DMFT. In addition, the inclusion of dynamical electronic correlation effects provides the experimentally observed magnetic moments, and the spectral density is in better agreement with photoemission data. These results establish the importance of electronic correlations in this ferromagnet., Comment: 6 pages, 5 eps embedded eps figures. Physical Review B, accepted version

We have used ion-irradiation to damage the (001) surfaces of SmB_6 single crystals to varying depths, and have measured the resistivity as a function of temperature for each depth of damage. We observe a reduction in the residual resistivity with increasing depth of damage. Our data are consistent with a model in which the surface state is not destroyed by the ion-irradiation, but instead the damaged layer is poorly conducting and the initial surface state is reconstructed below the damage. This behavior is consistent with a surface state that is topologically protected., Comment: 5 pages, 3 figures

We report the phase diagram of the doping series U_2Pt_xRh_(1-x)C_2, studied through measurements of resistivity, specific heat and magnetic susceptibility. The Neel temperature of U_2RhC_2 of ~ 22 K is suppressed with increasing Pt content, reaching zero temperature close to x=0.7, where we observed signatures of increased quantum fluctuations. In addition, evidence is presented that the antiferromagnetic state undergoes a spin-reorientation transition upon application of an applied magnetic field. This transition shows non-monotonic behaviour as a function of x, peaking at around x=0.3. Superconductivity is observed for x>=0.9, with T_c increasing with increasing x. The reduction in T_c and increase in residual resistivity with decreasing Pt content is inconsistent with the extension of the Abrikosov-Gor'kov theory to unconventional superconductivity., Comment: 7 pages, 9 figures

The easily tuned balance among competing interactions in Kondo-lattice metals allows access to a zero-temperature, continuous transition between magnetically ordered and disordered phases, a quantum-critical point (QCP). Indeed, these highly correlated electron materials are prototypes for discovering and exploring quantum-critical states. Theoretical models proposed to account for the strange thermodynamic and electrical transport properties that emerge around the QCP of a Kondo lattice assume the presence of an indefinitely large number of itinerant charge carriers. Here, we report a systematic transport and thermodynamic investigation of the Kondo-lattice system CeNi$_{2-\delta}$As$_2$ ($\delta$$\thickapprox$0.28) as its antiferromagnetic order is tuned by pressure and magnetic field to zero-temperature boundaries. These experiments show that the very small but finite carrier density of $\sim$0.032 $e^-$/f.u. in CeNi$_{2-\delta}$As$_2$ leads to unexpected transport signatures of quantum criticality and the delayed development of a fully coherent Kondo lattice state with decreasing temperature. The small carrier density and associated semi-metallicity of this Kondo-lattice material favor an unconventional, local-moment type of quantum criticality and raise the specter of Nozi\`{e}res exhaustion idea that an insufficient number of conduction-electron spins to separately screen local moments requires collective Kondo screening., Comment: 15+7 pages, 4+5 figures in Proc. Natl. Acad. Sci. USA (2015)

The upper critical field $H_{c2}$ of purple bronze Li$_{0.9}$Mo$_6$O$_{17}$ is found to exhibit a large anisotropy, in quantitative agreement with that expected from the observed electrical resistivity anisotropy. With the field aligned along the most conducting axis, $H_{c2}$ increases monotonically with decreasing temperature to a value five times larger than the estimated paramagnetic pair-breaking field. Theories for the enhancement of $H_{c2}$ invoking spin-orbit scattering or strong-coupling superconductivity are shown to be inadequate in explaining the observed behavior, suggesting that the pairing state in Li$_{0.9}$Mo$_6$O$_{17}$ is unconventional and possibly spin-triplet., Comment: 9 pages, 4 Main Figures, 5 Supplementary Information Figures; Accepted for publication in Physical Review Letters

In many superconducting transition-edge sensor (TES) microcalorimeters, the measured electrical noise exceeds theoretical estimates based on a thermal model of a single body thermally connected to a heat bath. Here, we report on noise and complex impedance measurements of a range of designs of TESs made with a Mo/Au bilayer. We have fitted the measured data using a two-body model, where the x-ray absorber and the TES are connected by an internal thermal conductance Gae. We find that the so-called excess noise measured in these devices is consistent with the noise generated from the internal thermal fluctuations between the x-ray absorber and the TES. Our fitted parameters are consistent with the origin of Gae being from the finite thermal conductance of the TES itself. These results suggest that even in these relatively low resistance Mo/Au TESs, the internal thermal conductance of the TES may add significant additional noise and could account for all the measured excess noise. Furthermore, we find that around regions of the superconducting transition with rapidly changing derivative of resistance with respect to temperature, an additional noise mechanism may dominate. These observations may lead to a greater understanding of TES devices and allow the design of TES microcalorimeters with improved performance.

The X-ray integral field unit (X-IFU) for ESA's Athena X-ray observatory will consist of 3840 AC-biased transition edge sensors (TESs), read out using frequency domain multiplexing (FDM). In this paper we describe details of the latest pixels geometries that are being designed for the current baseline array configuration. This includes details on how important TES properties (transition parameters, thermal design of the pixels, absorber composition) are being optimized to meet the target energy resolution, count-rate and quantum efficiency. We also present the latest design optimizations specifically targeted at mitigating AC-bias phenomena in Mo/Au TESs that can degrade performance.

The focal plane of the X-ray integral field unit (X-IFU) for ESA's Athena X-ray observatory will consist of approximately 4000 transition edge sensor (TES) x-ray microcalorimeters optimized for the energy range of 0.2 to 12 kiloelectronvolts. The instrument will provide unprecedented spectral resolution of approximately 2.5 electronvolts at energies of up to 7 kiloelectronvolts and will accommodate photon fluxes of 1 milliCrab (90 counts per second) for point source observations. The baseline configuration is a uniform large pixel array (LPA) of 4.28 arcseconds pixels that is read out using frequency domain multiplexing (FDM). However, an alternative configuration under study incorporates an 18 by × 18 small pixel array (SPA) of 2 arcseconds pixels in the central approximately 36 arcseconds region. This hybrid array configuration could be designed to accommodate higher fluxes of up to 10 milliCrabs (900 counts per second) or alternately for improved spectral performance (less than 1.5 electronvolts) at low count-rates. In this paper we report on the TES pixel designs that are being optimized to meet these proposed LPA and SPA configurations. In particular we describe details of how important TES parameters are chosen to meet the specific mission criteria such as energy resolution, count-rate and quantum efficiency, and highlight performance trade-offs between designs. The basis of the pixel parameter selection is discussed in the context of existing TES arrays that are being developed for solar and x-ray astronomy applications. We describe the latest results on DC biased diagnostic arrays as well as large format kilo-pixel arrays and discuss the technical challenges associated with integrating different array types on to a single detector die.