Search

The occurrence and spread of Verticillium dahliae (V. dahliae) in cotton depends on the combined effects of pathogens, host plants, and the environment, among which temperature is one of the most important environmental factors. Studying how temperature impacts the occurrence of V. dahliae in cotton and the mechanisms governing host defense responses is crucial for disease prevention and control. Understanding the dual effects of temperature on both pathogens and hosts can provide valuable insights for developing effective strategies to manage this destructive fungal infection in cotton. This study was based on the deciduous V. dahliae Vd-3. Through cultivation at different temperatures, Vd-3 formed the most microsclerotia and had the largest colony diameter at 25 °C. Endospore toxins were extracted, and 48 h was determined to be the best pathogenic time point for endotoxins to infect cotton leaves through a chlorophyll fluorescence imaging system and phenotypic evaluation. Transcriptome sequencing was performed on cotton leaves infected with Vd-3 endotoxins for 48 h at different culture temperatures. A total of 34,955 differentially expressed genes (DEGs) were identified between each temperature and CK (no pathogen inoculation), including 17,422 common DEGs. The results of the enrichment analysis revealed that all the DEGs were involved mainly in photosynthesis and sugar metabolism. Among the 34,955 DEGs, genes in the biosynthesis and signal transduction pathways of jasmonic acid (JA), salicylic acid (SA), and ethylene (ET) were identified, and their expression patterns were determined. A total of 5652 unique DEGs were clustered into six clusters using the k-means clustering algorithm, and the functions and main transcription factors (TFs) of each cluster were subsequently annotated. In addition, we constructed a gene regulatory network via weighted correlation network analysis (WGCNA) and identified twelve key genes related to cotton defense against V. dahliae at different temperatures, including four genes encoding transcription factors. These findings provide a theoretical foundation for investigating temperature regulation in V. dahliae infecting cotton and introduce novel genetic resources for enhancing resistance to this disease in cotton plants. [ABSTRACT FROM AUTHOR]

A wearable sensor capable of directly detecting cytokines in external secretions external to the human body is pivotal for gauging the intensity of the immune response and circumventing inflammatory storms, a significant clinical concern. The detection of low‐concentration cytokines is often hampered due to interference from impurities in secretions. Addressing this challenge, a wearable detection system is developed by integrating a Janus membrane with water auto‐collection/filtering capabilities, and aptamer‐modified graphene field‐effect transistor sensors, enabling the detection of low‐concentration cytokines in undiluted sweat samples. The Janus membrane can automatically filter external secretions and transport them to the sensor surface, effectively eliminating impurity interference and enhancing the sensor's detection capabilities. The device can sensitively detect cytokines (such as TNF‐α, a marker for inflammation and cancer) in undiluted sweat, with a detection range spanning 0.5 to 500 pM, and a detection limit reaching 0.31 pM. The ultra‐flexibility of the sensor is also verified, maintaining stable electrical properties even after enduring up to 50 extreme deformations. These findings indicate that the wearable detection system has the potential to realize low‐concentration cytokines monitoring in the sweat of inflammatory patients, to assist the healthcare system in controlling the body's immune status. [ABSTRACT FROM AUTHOR]

The Micro-Electro-Mechanical-System (MEMS) micromirror has shown great advantages in Light Detection and Ranging (LiDAR) for autonomous vehicles. The equipment on vehicles is usually exposed to environmental vibration that may degrade or even destroy the flexure of the micromirror for its delicate structure. In this work, a mechanical low-pass filter (LPF) acting as a vibration isolator for a micromirror is proposed. The research starts with the evaluation of vibration influences on the micromirror by theoretical calculation and simulation. The results illustrate that mechanical load concentrates at the slow flexure of the micromirror as it is excited to resonate in second-order mode (named piston mode) in Z-direction vibration. A specific LPF for the micromirror is designed to attenuate the response to high-frequency vibration, especially around piston mode. The material of the LPF is a beryllium-copper alloy, chosen for its outstanding properties of elasticity, ductility, and fatigue resistance. To measure the mechanical load on the micromirror in practical, the on-chip piezoresistive sensor is utilized and a relevant test setup is built to validate the effect of the LPF. Micromirrors with or without the LPF are both tested under 10 g vibration in the Z-direction. The sensor output of the device with the LPF is 35.9 mV in piston mode, while the device without the LPF is 70.42 mV. The attenuation ratio is 0.51. This result demonstrates that the LPF structure can effectively reduce the stress caused by piston mode vibration. [ABSTRACT FROM AUTHOR]

Soil salinization is the main abiotic stress factor affecting agricultural production worldwide, and salt stress has a significant impact on plant growth and development. Cotton is one of the most salt-tolerant crops. Therefore, the selection and utilization of salt-tolerant germplasm resources and the excavation of salt resistance genes play important roles in improving cotton production in saline–alkali soils. In this study, we analysed the population structure and genetic diversity of a total 149 cotton plant materials including 137 elite Gossypium hirsutum cultivar accessions collected from China and 12 elite Gossypium hirsutum cultivar accessions collected from around the world. Illumina Cotton SNP 70 K was used to obtain genome-wide single-nucleotide polymorphism (SNP) data for 149 elite Gossypium hirsutum cultivar accessions, and 18,430 highly consistent SNP loci were obtained by filtering. It was assessed by using PCA principal component analysis so that the 149 elite Gossypium hirsutum cultivar accessions could be divided into two subgroups, including subgroup 1 with 78 materials and subgroup 2 with 71 materials. Using the obtained SNP and other marker genotype test results, under salt stress, the salt tolerance traits 3d Germination potential, 3d Radicle length drop rate, 7d Germination rate, 7d Radicle length drop rate, 7d Germination weight, 3d Radicle length, 7d Radicle length, Relative Germination potential, Relative Germination rate, 7d Radicle weight drop rate, Salt tolerance index 3d Germination potential index, 3d Radicle length index, 7d Radicle length index, 7d Radicle weight index and 7d Germination rate index were evaluated by GWAS (genome-wide association analysis). A total of 27 SNP markers closely related to the salt tolerance traits and 15 SNP markers closely related to the salt tolerance index were detected. At the SNP locus associated with phenotyping, Gh_D01G0943, Gh_D01G0945, Gh_A01G0906, Gh_A01G0908, Gh_D08G1308 and Gh_D08G1309 related to plant salt tolerance were detected, and they were found to be involved in intracellular transport, sucrose synthesis, osmotic pressure balance, transmembrane transport, N-glycosylation, auxin response and cell amplification. This study provides a theoretical basis for the selection and breeding of salt-tolerant upland cotton varieties. [ABSTRACT FROM AUTHOR]

Background: DNA methylation is an important part of epigenetic regulation and plays an important role in the response of plants to adverse stress., Methods: In this study, whole-genome bisulfite sequencing (WGBS) was performed on the high-temperature-resistant material Xinluzao 36 and the high-temperature-sensitive material Che 61-72 at 0 h and 12 h under high-temperature stress conditions., Results: The results revealed that the Gossypium hirsutum methylation levels of CG and CHG (H = A, C, or T) decreased after the high-temperature stress treatment, and the methylation level of the A subgenome was significantly greater than that of the D subgenome. The methylation level of CHH increased, and the methylation level of CHH in the D subgenome was significantly greater than that in the A subgenome after high-temperature stress treatment. The methylation density of CG is lower than that of CHG and CHH, and the methylation density of the middle region of chromosomes is greater than that of both ends, which is opposite to the distribution density of genes. There were 124 common differentially methylated genes in the CG, CHG, and CHH groups, and 5130 common DEGs and differentially methylated genes were found via joint analysis with RNA-seq; these genes were significantly enriched in the biosynthesis of plant hormones, thiamine metabolism, glutathione metabolism, and tyrosine metabolism pathways. DNA methylation did not affect the expression of many genes (accounting for 85.68% of the differentially methylated genes), DNA methylation-promoted gene expression was located mainly in the downstream region of the gene or gene body, and the expression of inhibitory genes was located mainly in the upstream region of the gene., Conclusions: This study provides a theoretical basis for further exploration of the gene expression and functional regulatory mechanism of G. hirsutum DNA methylation under high-temperature stress conditions.