Search

Current wireless communication systems are increasingly constrained by insufficient bandwidth and limited power output, impeding the achievement of ultra-high-speed data transmission. The terahertz (THz) range offers greater bandwidth, but it also imposes higher requirements on broadband and high-power devices. In this work, we present a modified uni-traveling-carrier photodiode (MUTC-PD) module with WR-6 waveguide output for photonics-assisted fiber-THz integrated wireless communications. Through the optimization of the epitaxial structure and high-impedance coplanar waveguide (CPW), the fabricated 6-um-diameter MUTC-PD achieves a high output power of -0.96 dBm at 150 GHz and ultra-flat frequency response at D-band. The MUTC-PD is subsequently packaged into a compact WR-6 module, incorporating planar-circuit-based RF-choke, DC-block and probe. The packaged PD module demonstrates high saturation power and flat frequency responses with minimal power roll-off of only 2 dB over 110-170 GHz. By incorporating the PD module into a fiber-THz integrated communication system, high data rates of up to 160 Gbps with 16 quadrature amplitude modulation (QAM) and a maximum symbol transmission rate of 60 Gbaud with QPSK modulation are successfully secured. The demonstration verifies the potential of the PD module for ultra-broadband and ultra-high-speed THz communications, setting a foundation for future research in high-speed data transmission., Comment: This is the accepted version of the manuscript, as published in Laser & Photonics Reviews

High-performance electro-optic modulators play a critical role in modern telecommunication networks and intra-datacenter interconnects. Low driving voltage, large electro-optic bandwidth, compact device size, and multi-band operation ability are essential for various application scenarios, especially energy-efficient high-speed data transmission. However, it is challenging to meet all these requirements simultaneously. Here, we demonstrate a high-performance dual-band thin-film lithium niobate electro-optic modulator with low-k underfill to achieve overall performance improvement. The low-k material helps reduce the RF loss of the modulator and achieve perfect velocity matching with narrow electrode gap to overcome the voltage-bandwidth limitation, extending electro-optic bandwidth and enhancing modulation efficiency simultaneously. The fabricated 7-mm-long modulator exhibits a low half-wave voltage of 1.9 V at C-band and 1.54 V at O-band, featuring a low half-wave voltage-length product of 1.33 V*cm and 1.08 V*cm, respectively. Meanwhile, the novel design yields an ultra-wide extrapolated 3 dB bandwidth of 220 GHz (218 GHz) in the C-band (O-band). High-speed data transmission in both C- and O-bands using the same device has been demonstrated for the first time by PAM8 with data rates up to 390 Gbit/s, corresponding to a record-low energy consumption of 0.69 fJ/bit for next-generation cost-effective ultra-high-speed optical communications.

PyFR is an open-source cross-platform computational fluid dynamics framework based on the high-order Flux Reconstruction approach, specifically designed for undertaking high-accuracy scale-resolving simulations in the vicinity of complex engineering geometries. Since the initial release of PyFR v0.1.0 in 2013, a range of new capabilities have been added to the framework, with a view to enabling industrial adoption of the capability. This paper provides details of those enhancements as released in PyFR v2.0.3, explains efforts to grow an engaged developer and user community, and provides latest performance and scaling results on up to 1024 AMD Instinct MI250X accelerators of Frontier at ORNL (each with two GCDs), and up to 2048 NVIDIA GH200 GPUs on Alps at CSCS.

AlGaAs is a promising integrated nonlinear photonics material with enormous optical nonlinearity and high refractive index. Nevertheless, presently AlGaAs microring resonators exhibiting high quality factors and tight optical confinement rely predominantly on wafer bonding techniques, which entail an intricate fabrication process. Here, we present suspended AlGaAs waveguides and resonators as a viable platform for high efficiency integrated nonlinear photonics. The suspended microring resonator formed by combined plasma dry etching and chemical wet etching exhibits an intrinsic quality factor Q of 2.1*106, and Kerr comb generation with milliwatt level threshold is recorded. Our demonstration opens up a new prospect for employing AlGaAs devices in integrated nonlinear photonics., Comment: 12 pages, 8 figures

In this paper, we develop the first entirely graphic processing unit (GPU) based h-adaptive flux reconstruction (FR) method with linear trees. The adaptive solver fully operates on the GPU hardware, using a linear quadtree for two dimensional (2D) problems and a linear octree for three dimensional (3D) problems. We articulate how to efficiently perform tree construction, 2:1 balancing, connectivity query, and how to perform adaptation for the flux reconstruction method on the GPU hardware. As a proof of concept, we apply the adaptive flux reconstruction method to solve the inviscid isentropic vortex propagation problem on 2D and 3D meshes to demonstrate the efficiency of the developed adaptive FR method on a single GPU card. Depending on the computational domain size, acceleration of one or two orders of magnitude can be achieved compared to uniform meshing. The total computational cost of adaption, including tree manipulations, connectivity query and data transfer, compared to that of the numerical solver, is insignificant. It can be less than 2% of the total wall clock time for 3D problems even if we perform adaptation as frequent as every 10 time steps with an explicit 3-stage Runge--Kutta time integrator.

Within the framework of $ p $-adaptive flux reconstruction, we aim to construct efficient polynomial multigrid ($p$MG) preconditioners for implicit time integration of the Navier--Stokes equations using Jacobian-free Newton--Krylov (JFNK) methods. We hypothesise that in pseudo transient continuation (PTC), as the residual drops, the frequency of error modes that dictates the convergence rate gets higher and higher. We apply nonlinear $p$MG solvers to stiff steady problems at low Mach number ($\mathrm{Ma}=10^{-3}$) to verify our hypothesis. It is demonstrated that once the residual drops by a few orders of magnitude, improved smoothing on intermediate $ p $-sublevels will not only maintain the stability of $ p $MG at large time steps but also improve the convergence rate. For the unsteady Navier--Stokes equations, we elaborate how to construct nonlinear preconditioners using pseudo transient continuation for the matrix-free generalized minimal residual (GMRES) method used in explicit first stage, singly diagonally implicit Runge--Kutta (ESDIRK) methods, and linearly implicit Rosenbrock--Wanner (ROW) methods. Given that at each time step the initial guess in the nonlinear solver is not distant from the converged solution, we recommend a two-level $p\{p_0\text{-}p_0/2\} $ or even $ p\{p_0\text{-}(p_0-1)\} $ $p$-hierarchy for optimal efficiency with a matrix-based smoother on the coarser level based on our hypothesis. It is demonstrated that insufficient smoothing on intermediate $p$-sublevels will deteriorate the performance of $p$MG preconditioner greatly. (See full abstract in the paper.)

Interface phonon modes that are generated by several atomic layers at the heterointerface play a major role in the interface thermal conductance for nanoscale high-power devices such as nitride-based high-electron-mobility transistors and light emitting diodes. Here we measure the local phonon spectra across AlN/Si and AlN/Al interfaces using atomically resolved vibrational electron energy-loss spectroscopy in a scanning transmission electron microscope. At the AlN/Si interface, we observe various localized phonon modes, of which the extended and interfacial modes act as bridges to connect the bulk AlN modes and bulk Si modes, and are expected to boost the inelastic phonon transport thus substantially contribute to interface thermal conductance. In comparison, no such phonon bridge is observed at the AlN/Al interface, for which partially extended modes dominate the interface thermal conductivity. This work provides valuable insights into understanding the interfacial thermal transport in nitride semiconductors and useful guidance for thermal management via interface engineering.

One of the most common approaches for quenching single-photon avalanche diodes is to use a passive resistor in series with it. A drawback of this approach has been the limited recovery speed of the single-photon avalanche diodes. High resistance is needed to quench the avalanche, leading to slower recharging of the single-photon avalanche diodes depletion capacitor. We address this issue by replacing a fixed quenching resistor with a bias-dependent adaptive resistive switch. Reversible generation of metallic conduction enables switching between low and high resistance states under unipolar bias. As an example, using a Pt/Al2O3/Ag resistor with a commercial silicon single-photon avalanche diodes, we demonstrate avalanche pulse widths as small as ~30 ns, 10x smaller than a passively quenched approach, thus significantly improving the single-photon avalanche diodes frequency response. The experimental results are consistent with a model where the adaptive resistor dynamically changes its resistance during discharging and recharging the single-photon avalanche diodes.

A novel thin-film LiNbO3 (TFLN) electro-optic modulator is proposed and demonstrated. LiNbO3-silica hybrid waveguide is adopted to maintain low optical loss for an electrode spacing as narrow as 3 {\mu}m, resulting in a record low half-wave-voltage length product of only 1.7 V*cm. Capacitively loaded traveling-wave electrodes (CL-TWEs) are employed to reduce the microwave loss, while quartz substrate is used in place of silicon substrate to achieve velocity matching. The fabricated TFLN modulator with a 5-mm-long modulation region exhibits a half-wave-voltage of 3.4 V and merely 1.3 dB roll-off in electro-optic response up to 67 GHz, and a 3-dB modulation bandwidth over 110 GHz is predicted.

Optical frequency comb generation in microresonators has attracted significant attention over the past decade, as it offers the promising potential for chip-scale optical frequency synthesis, optical clocks and precise optical spectroscopy. However, accessing temporal dissipative Kerr soliton (DKSs) is known to be severely hampered by thermal effects. Furthermore, due to the degeneracy of soliton existence range with respect to soliton number, deterministically accessing single soliton state is another challenge. Here, we demonstrate stable and deterministic single soliton generation in AlN-on-sapphire platform via auxiliary laser pumping scheme without the requirement of fast control of the pump power and detuning. Moreover, we reveal the underlying physics of soliton switching in a dual-pumped microcomb, which is fully described by the Lugiato - Lefever equation. The switching process is attributed to cross-phase modulation (XPM) induced degeneracy lifting of the soliton existence range, corresponding to an effective negative thermo-optic effect., Comment: 5 pages, 4 figures