Search

Responsible consumption and production is the 12th of the seventeen SDGs which is difficult for developing countries to achieve due to high waste production. Indonesia is the second largest producer of food waste in the world. Garbage is solid waste generated from community activities. Population density is an indicator to estimate the amount of waste generated in an area. The choice of West Java Province as the research area is based on the fact that this Province has the second highest population density in Indonesia. This study aimed to determine the predictors/factors that influence waste production in the districts/cities of West Java Province. The data used in this study are total waste as a response variable and GRDP (gross domestic product), total spending per capita, average length of schooling, literacy rate, number of MSMEs (micro, small, and medium enterprises), and several recreational and tourism places, the number of people's markets, and the number of restaurants as predictors. The methods used in this research are spatial autoregressive regression/SAR, spatial Lag-X/SLX, and spatial Durbin/SDM. The results of this study show that the SAR is the best model with the lowest BIC (74.442) and pseudo-R-squared (0.7934). Factors that significantly affect total waste production are literacy levels, the number of MSMEs, the number of traditional markets, and the number of recreational and tourist places.

This research focuses on the synthesis of novel low-cost granular sorbents based on bentonite clay of the Navbahor deposit, dust fraction of Angren brown coal, and agricultural wastes such as straw and sawdust to meet the internal needs of the Republic of Uzbekistan. The impact of the initial mixture ingredients on the structural and textural properties of bentonite-coal sorbents (BCSs) has been studied using X-ray diffraction, Raman spectroscopy, Fourier-transform infrared spectroscopy, optical microscopy, and nitrogen adsorption-desorption analysis. For determining the sorption capacity of BCSs, a standard model substance methylene blue (MB), was applied. It was revealed that the maximum adsorption amount of MB was 5.3 mg∙g−1 during 2 h of contact. Prolonging the contact time to 24 h allowed for more extensive diffusion of dye molecules into the sorbent's pores, increasing the adsorption capacity to 13 mg∙g−1. It was demonstrated that BCSs could be regenerated by strong oxidizing agents such as sulfuric acid and hydrogen peroxide, with sulfuric acid proving more effective. Regeneration fully restores sorption properties, particularly at low dye concentrations (up to 0.2 mg∙ml−1). Despite slight reductions in adsorption capacity over multiple regeneration cycles, the sorbents maintain their structural integrity and durability. It is shown that compared to imported expensive activated carbon, the gross profitability of the in-house production of such granular BCSs within the territory of Uzbekistan increases from 48 to 78%, while the net income increases almost three times. [ABSTRACT FROM AUTHOR]

Copyright of Rudarsko-Geolosko-Naftni Zbornik is the property of Faculty of Mining, Geology & Petroleum Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Resource depletion and food waste accumulation represent a tremendous socio-economic and environmental problem. One promising strategy involves the use of byproducts derived from food waste as ingredients for cosmetic products. The aim of this work is to propose clementine peels and olive leaf extracts as value-added bioproducts for a cosmetic cream. Extracts were obtained by super critical extraction showing an antioxidant activity of ca. 25%. No cytotoxic effects of the extracts were recorded on keratinocyte cells up to a concentration of 4% v/v ratio within 24 h. The incorporation of clementine peels and olive leaf extracts into creams did not compromise their stability, as demonstrated by Turbiscan analyses at room and extreme (40 °C) storage conditions. The safety profiles of the final cosmetic formulations were further in vivo demonstrated on human volunteers. We analyzed the trans-epidermal water loss and variation of the skin's erythematous index, which showed profiles that almost overlapped with the negative control. Moreover, rheological analysis of the resulting creams evidences their suitable spreadability with similar pseudoplastic profiles, although a slight reduction of viscosity was recorded by improving the extracts' concentrations. The proposed approach highlights the advantage of combining byproduct resources and supercritical fluid extraction to obtain a safe and eco-friendly face cream. [ABSTRACT FROM AUTHOR]

The dimension stone industry faces a significant environmental challenge due to the large amount of waste produced during the production process. About 51.3% of the materials extracted from dimension stone quarries worldwide end up as quarry waste. The presence of discontinuities and fractures primarily causes this waste. However, by examining the characteristics of these discontinuities and fractures and identifying in-situ blocks of the rock mass, it is possible to reduce the amount of waste produced during dimension stone quarrying. This study focuses on an abandoned quarry bench of the Lashotor quarries complex in the Isfahan Province, Iran. Due to high waste production, the quarry bench was left unused. The study aimed to identify the in-situ blocks of the quarry bench by examining the characteristics of the rock mass’s discontinuities and fractures. The authors used a modified algorithm to identify and grade all the quarry bench blocks based on the target market. The study revealed that some blocks in the abandoned quarry bench could be supplied to the target market, and the bench has the potential for block extraction. The algorithm’s modification based on the shape factor of blocks is an important innovation that increases the accuracy of block determination compared to previous methods. Overall, this algorithm can be used as a decision-making tool in extracting or not extracting the quarry bench of dimension stone quarries and implementing an optimal cutting pattern to reduce waste production.

Featured Application: This scoping review emphasizes the environmental responsibility of dental healthcare concerning dental solid waste. It calls for a collective effort to ensure that the practices aimed at preserving health do not compromise the well-being of our planet and future generations, avoiding the improper disposal and accumulation of dental waste. In the face of 21st-century environmental challenges, including climate change, migration pressures, and waste disposal issues, certain healthcare sectors, notably dentistry, pose a significant global environmental footprint with concerns about carbon emissions and waste production. This scoping review searches the paradox that healthcare, while dedicated to safeguarding health, inadvertently contributes to environmental degradation through waste accumulation and disposal. The analysis of the relevant literature emphasizes the imperative for an environmentally sustainable approach to dental waste measurement, disposal methods, and comprehensive education for stakeholders. Aligned with the World Conference on Sustainable Development and the United Nations' 2030 Agenda, the study adhered to PRISMA-ScR systematic review guidelines and the Institute of Medicine's recommendations. The study utilized Medline/PubMed and international organization websites for data retrieval, employing Boolean operator queries in Medline. The systematic literature analysis identified six cross-sectional studies (2004–2023) highlighting variations in dental waste composition due to the lack of standardized identification methods. This heterogeneity underscores the need for a proposed research model, emphasizing comprehensive methodologies and healthcare staff training in waste management, thus transforming the analysis into a scoping review. The study advocates for environmentally conscious dental practices, contributing to broader sustainable healthcare goals through sharing of a research protocol for dental solid waste management. [ABSTRACT FROM AUTHOR]

BACKGROUND AND OBJECTIVES: Good health and a safe environment are essential for sustainable development, including the appropriate management of healthcare wastes. The study intends to assess the generation rate and management methods of healthcare waste in the regional hospital center and a private clinic in Tangier, Morocco, with a focus on potential risks to health workers from infectious diseases.METHODS: The study collected data on healthcare waste generation over a period of two months by measuring and analyzing general and hazardous waste using an electronic scale. The data was presented as averages in kilograms per bed per day and as percentages. A questionnaire was provided to 100 healthcare workers. It included questions on their sociodemographic characteristics and their knowledge and attitudes regarding healthcare waste management.FINDINGS: The case study revealed that the healthcare waste production in the two institutions varied, with the private clinic producing 0.76 kilograms per day per bed and the regional hospital center producing 1.84 kilograms per day per bed. The survey also discovered that the hazardous fraction of waste generated in the regional hospital center was 40 percent, which was much higher than the World Health Organization’s estimation. The daily amount of hazardous waste generated increased from 260.49 kilograms to 436.81 kilograms post-COVID-19. The survey found gaps in knowledge, attitudes, and daily challenges in waste management practices among the health workers in both facilities.CONCLUSION: The survey findings suggest that the healthcare waste management methods in Tangier are unsafe and may endanger the health workers and patients. The study found that the lack of monitoring and control contributed significantly to noncompliance with good practices. These findings can be used by the regional divisions of the Ministry of Health to develop specific protocols for managing sanitary emergencies and perform routine observation and training at all levels in the two facilities studied.

In this paper, we compare the development and possibilities for improvement of waste management in three countries: Slovakia, the Czech Republic, and Poland. Waste management is part of the circular economy. The circular economy is the basis for waste management today. This applies to municipal waste management, too. In this paper, we work with data available in the Eurostat database. We mainly deal with municipal waste in the three chosen countries. The output of this paper is an assessment of indicators such as recycling rates and waste production. The outputs are documented graphically. [ABSTRACT FROM AUTHOR]

Due to population growth, the generation of solid waste in Morocco constantly increases, considerably impacting water, soil, and air. To minimize this impact, proper waste management is necessary. This research examines waste generation development in Rabat, Sale, and Temara cities in 2015, 2018, and 2019. This allows us to propose solutions to environmental problems and to discuss upstream and downstream management modalities. According to this study, the total amount of waste in Sale changes between 17,947.6 t/month, 21,256.6 t/month, and 20,852 t/month, whereas it ranges between 25,017.6 t/month, 24,031.7 t/month, and 24,038.1 t/month for Rabat in 2015, 2018, and 2019. The lowest quantities are 12,901.3 t/month, 10,104.3 t/month, and 1032.5 t/month in Temara for 2015, 2018, and 2019. The data obtained will serve as an aid to decision‐making to guide proper management. Moreover, sensitizing the population on the issue of waste management is necessary to protect the environment and human health. [ABSTRACT FROM AUTHOR]

Background: Greenhouse gases (GHGs) are significant contributors to climate change, and CO2 equivalent (CO2-e) is measured to compare emissions from GHGs. The healthcare sector contributes 4.4% of global CO2-e emissions, mainly with energy consumption and, in lesser extent, waste production. In this regard, bronchoscopy procedures produce a large amount of waste and are responsible for a significant consumption of energy. Objective: We aimed at quantifying the impact on waste mass production, energy consumption, and recyclability of bronchoscopic procedures. Methods: We conducted a prospective single-centre observational study; for each type of procedure (performed with either reusable or single-use instruments), the number of items used, their weight, and recyclability were evaluated, as well as the material of which recyclable waste was made of. We then calculated the total amount of waste produced, its recyclability, energy consumption, and CO2-e produced over 10 days of activity in our Interventional Pulmonology Unit. Results: Sixty procedures generated 61,928 g of waste, of which only 15.8% was potentially recyclable. Single-use instruments generated nearly twofold more recyclable waste than reusable ones, 80% during the procedure phase. Reusable instruments generated 45% of waste during the reprocessing phase, of which 50% was recyclable. The recyclable material was totally composed of paper and plastic. During 10 days of activity, we consumed 64 kWh and produced more than 67 kg of CO2-e due to non-recyclable waste and energy consumption. Conclusions: Our results confirm the compelling need to recycle as many materials as possible, even if the amount of recyclable waste is limited. In this respect, official documents issued by international societies are urgently needed to align our activity with climate requirements and improve the sustainability of our work. [ABSTRACT FROM AUTHOR]

BACKGROUND AND OBJECTIVES: Good health and a safe environment are essential for sustainable development, including the appropriate management of healthcare wastes. The study intends to assess the generation rate and management methods of healthcare waste in the regional hospital center and a private clinic in Tangier, Morocco, with a focus on potential risks to health workers from infectious diseases. METHODS: The study collected data on healthcare waste generation over a period of two months by measuring and analyzing general and hazardous waste using an electronic scale. The data was presented as averages in kilograms per bed per day and as percentages. A questionnaire was provided to 100 healthcare workers. It included questions on their sociodemographic characteristics and their knowledge and attitudes regarding healthcare waste management. FINDINGS: The case study revealed that the healthcare waste production in the two institutions varied, with the private clinic producing 0.76 kilograms per day per bed and the regional hospital center producing 1.84 kilograms per day per bed. The survey also discovered that the hazardous fraction of waste generated in the regional hospital center was 40 percent, which was much higher than the World Health Organization's estimation. The daily amount of hazardous waste generated increased from 260.49 kilograms to 436.81 kilograms post-COVID-19. The survey found gaps in knowledge, attitudes, and daily challenges in waste management practices among the health workers in both facilities. CONCLUSION: The survey findings suggest that the healthcare waste management methods in Tangier are unsafe and may endanger the health workers and patients. The study found that the lack of monitoring and control contributed significantly to noncompliance with good practices. These findings can be used by the regional divisions of the Ministry of Health to develop specific protocols for managing sanitary emergencies and perform routine observation and training at all levels in the two facilities studied. [ABSTRACT FROM AUTHOR]

Resource depletion and food waste accumulation represent a tremendous socio-economic and environmental problem. One promising strategy involves the use of byproducts derived from food waste as ingredients for cosmetic products. The aim of this work is to propose clementine peels and olive leaf extracts as value-added bioproducts for a cosmetic cream. Extracts were obtained by super critical extraction showing an antioxidant activity of ca. 25%. No cytotoxic effects of the extracts were recorded on keratinocyte cells up to a concentration of 4% v/v ratio within 24 h. The incorporation of clementine peels and olive leaf extracts into creams did not compromise their stability, as demonstrated by Turbiscan analyses at room and extreme (40 °C) storage conditions. The safety profiles of the final cosmetic formulations were further in vivo demonstrated on human volunteers. We analyzed the trans-epidermal water loss and variation of the skin’s erythematous index, which showed profiles that almost overlapped with the negative control. Moreover, rheological analysis of the resulting creams evidences their suitable spreadability with similar pseudoplastic profiles, although a slight reduction of viscosity was recorded by improving the extracts’ concentrations. The proposed approach highlights the advantage of combining byproduct resources and supercritical fluid extraction to obtain a safe and eco-friendly face cream.

In the face of 21st-century environmental challenges, including climate change, migration pressures, and waste disposal issues, certain healthcare sectors, notably dentistry, pose a significant global environmental footprint with concerns about carbon emissions and waste production. This scoping review searches the paradox that healthcare, while dedicated to safeguarding health, inadvertently contributes to environmental degradation through waste accumulation and disposal. The analysis of the relevant literature emphasizes the imperative for an environmentally sustainable approach to dental waste measurement, disposal methods, and comprehensive education for stakeholders. Aligned with the World Conference on Sustainable Development and the United Nations’ 2030 Agenda, the study adhered to PRISMA-ScR systematic review guidelines and the Institute of Medicine’s recommendations. The study utilized Medline/PubMed and international organization websites for data retrieval, employing Boolean operator queries in Medline. The systematic literature analysis identified six cross-sectional studies (2004–2023) highlighting variations in dental waste composition due to the lack of standardized identification methods. This heterogeneity underscores the need for a proposed research model, emphasizing comprehensive methodologies and healthcare staff training in waste management, thus transforming the analysis into a scoping review. The study advocates for environmentally conscious dental practices, contributing to broader sustainable healthcare goals through sharing of a research protocol for dental solid waste management.

Strategic plans for waste management require information on the current and future waste generation as a primary data source. Over the years, various approaches and methods for waste generation modeling have been presented and applied. This review provides a summary of the tasks that require information on waste generation that are most frequently handled in waste management. It is hypothesized that there is not currently a modeling approach universally suitable for forecasting any fraction of waste. It is also hypothesized that most models do not allow for modeling different scenarios of future development. Almost 360 publications were examined in detail, and all of the tracked attributes are included in the supplementary. A general step-by-step guide to waste generation forecasting, comprising data preparation, pre-processing, processing, and post-processing, was proposed. The problems that occurred in the individual steps were specified, and the authors' recommendations for their solution were provided. A forecasting approach based on a short time series is presented, due to insufficient options of approaches for this problem. An approach is presented for creating projections of waste generation depending on the expected system changes. Researchers and stakeholders can use this document as a supporting material when deciding on a suitable approach to waste generation modeling or waste management plans. [ABSTRACT FROM AUTHOR]

Although the concept of the circular economy as a term was first mentioned in 2015, when the "Action Plan for the circular economy" was adopted at the European level, it is still not possible to speak of a sufficient knowledge base in this area. The Action Plan (COM (2015) 614) can be seen as an initial strategic document that sets out a concrete and ambitious roadmap for implementing the Sustainable Development Agenda 2030. However, the European Green Agreement cannot be left out in this context either (COM(2019) 640). It is seen as a new growth strategy to transform the EU into a fair and prosperous society with a modern, competitive, resource-efficient economy, with net greenhouse gas emissions expected to be zero by 2050 and economic growth independent of resource use. A new EU circular economy action plan - Towards a cleaner and more competitive Europe was also adopted in 2020 (COM(2020) 98). The main priority areas are measures focusing on the value chains of key products electronics and ICT (information and communication technologies), batteries and vehicles, plastics, textiles, packaging, construction and buildings, food, water and nutrients measures covering all links in the value chain from production to consumption, repair and refurbishment, waste management up to the return of raw materials back to the economy and their use in the production cycle in the form of secondary raw materials. The transition to a circular economy also includes a revision of the European waste directives: on waste, on packaging and packaging waste, on landfills, on batteries and accumulators and used batteries and accumulators, and on waste electrical and electronic equipment. In order for all of this to be possible, it is necessary to know the amount of waste produced by individual sectors, which is also dealt with in our article. [ABSTRACT FROM AUTHOR]

In this paper, we compare the development and possibilities for improvement of waste management in three countries: Slovakia, the Czech Republic, and Poland. Waste management is part of the circular economy. The circular economy is the basis for waste management today. This applies to municipal waste management, too. In this paper, we work with data available in the Eurostat database. We mainly deal with municipal waste in the three chosen countries. The output of this paper is an assessment of indicators such as recycling rates and waste production. The outputs are documented graphically.

The transition to a circular economy can be realized with higher waste recycling. With the knowledge of waste flows and the links between them, it is possible to plan the infrastructure of the entire system and set the goals needed for the transition to a circular economy. If the statistical analysis does not provide quality models, it is possible to describe waste flows using basic balance relationships. This contribution presents an optimization model based on quadratic programming. The output of the model is an estimate of the waste amount that was managed to divert from mixed municipal waste to separate fractions in the past period. A key input is an estimate of the composition of mixed municipal waste. For a more detailed territorial model, composition estimates are often not available, so an optimization model using the principle of credibility has been proposed. Uncertain information for lower territorial units is corrected by aggregated results for the national level. The resulting optimization models were tested on the data of the Czech Republic for the period 2010–2018 in annual detail. The result interprets what part of the newly separated waste comes from mixed municipal waste. For the significant monitored fractions this value is low, 0.26 for bio-waste in the Czech Republic. On the contrary, the high part of the shift from mixed municipal waste is for plastic, 0.82. The results showed the advantage of correction at lower territory levels due to the high variability of the input data. [ABSTRACT FROM AUTHOR]

Climate change has been described as the "defining issue of our time". The wide-ranging effects of climate change are well documented. These effects include a change in weather patterns with more frequent extreme weather events, loss of biodiversity, loss of food security, political instability and declining health. Sub-Saharan Africa is especially vulnerable to climate change, even though the region only accounts for a fraction of global greenhouse gas (GHG) emissions. The healthcare sector contributes significantly to climate change. Within healthcare, the provision of anaesthesia is associated with a disproportional contribution to GHG emissions, waste production and energy consumption. Anaesthesia providers were identified as crucial role players in improving sustainability within medicine. A growing body of literature emphasises the importance of sustainable anaesthesia practices. Recommendations are regularly updated based on expanding knowledge. However, the subject matter is broad and often falls outside the sphere of anaesthesiology, making it challenging and time-consuming to identify information relevant to clinical practice. Furthermore, recommendations might differ depending on a multitude of circumstances. This review aims to simplify and summarise contemporary literature and recommendations, and present these concisely. [ABSTRACT FROM AUTHOR]

Domestic wastewater is an important alternative source of water in the face of a growing discrepancy between water availability and demand. The use of techniques that enable the urban reuse of treated sewage is essential to make cities more sustainable and resilient to water scarcity. The main goal of this study was to evaluate the performance of an electrocoagulation-flotation system in the treatment of domestic wastewater for urban reuse. The study was performed using raw domestic wastewater samples. The electrocoagulation-flotation system was a cylindrical reactor with aluminum electrodes. The treatment conditions involved agitation at 262.5 rpm, electrical current of 1.65 A, electrolysis time of 25 min, an initial pH of 6, and inter-electrode distance of 1 cm. Overall, the electrocoagulation-flotation system was highly efficient for removal of apparent color (97.9%), chemical oxygen demand (82.9%), turbidity (95.8%), and orthophosphate phosphorous (> 98.2%). The electrocoagulation-flotation system had a consumption of electrical energy ranging from 9.5 to 13.3 kWh m−3, electrode mass from 294.7 to 557.0 g m−3, and hydrochloric acid from 4.3 to 6.6 L m−3. Sludge production in the system ranged from 1,125.7 to 1,835.7 g m−3. Treated wastewater had a satisfactory quality for several urban reuse activities. The electrocoagulation-flotation system showed potential to be used for domestic wastewater treatment for urban reuse purposes. [ABSTRACT FROM AUTHOR]

This study aimed to quantify the amount of pharmaceutical waste produced in New Zealand, and determine the composition of pharmaceutical waste from community pharmacies in Auckland, New Zealand. Pharmaceutical waste collected in New Zealand is increasing, peaking at 542 tonne in 2019. Pharmaceutical waste collected from hospitals and pharmacies in Auckland increased by more than fourfold from 2016 to 2020. An audit of the types of pharmaceutical waste collected from community pharmacies revealed that the most common classes of drugs identified in this waste stream belonged to the nervous system, cardiovascular system and alimentary tract, and metabolism. Following examination of the contents of 12 pharmaceutical waste bins, 475 different pharmaceutical products were identified, highlighting the breadth of drugs in this waste stream. A range of dosage forms and hence materials were identified, which could present challenges for future waste treatment approaches. Hazardous drugs were identified including cytotoxic compounds, which should go into a separate waste stream for incineration. There is a need for similar data to be collected from multiple sites to fully appreciate the magnitude and composition of pharmaceutical waste. This will allow for the suitability of current practices for managing this hazardous waste stream to be evaluated. [ABSTRACT FROM AUTHOR]

The Slovak spirits industry has a stable position within the alcoholic beverages industry in the Slovak Republic. However, its production process causes significant environmental stress on nature. The industry can use roughly only 10% of the raw materials. This means a significant amount of waste is produced during the distillation process. We investigated the biogas production potential within the Slovak distilleries producing spirits for final consumption when we compared the production of spirits between the years 2010 and 2019. Biogas production potential is calculated as an ideal situation when all spent wash from spirits producing distilleries is used for biogas production. The potential energy gain is also calculated in kWh based on the already available research in the field of biogas production. We conducted that the total biogas potential of the Slovak spirits industry could reach 15,886,053 kWh in terms of electricity and 22,946,177 kWh in terms of heat energy if we calculate energy potential according to the spirits production in the year 2019. The total combined energy potential generated during the reuse of waste from distilleries could reach 38,832,230 kWh. The biogas production in these facilities has also a positive side effect. If distilleries use the heat energy for the distillation process, the amount of greenhouse emissions will also be declining.

Copyright of Waste Forum is the property of Czech Environment Management Center (CEMC) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Dimension stones industry is an industry with significant economic potential that has been overgrowing in recent years. Despite this growth, this industry faces several significant challenges, including very low efficiency, high production costs, and many wastes generation and resource loss during extraction and processing phases. To overcome these issues, further studies are needed to discover the causes of these problems, determine how to update existing technologies, replace them with more efficient alternatives, and find out how to use new and advanced optimization methods in dimension stones exploration and extraction and processing procedures. Regardless of the approach, these measures' primary purpose should be to achieve better results in recovery rate, production costs, resource loss, and waste generation. In this paper, the amount of waste generated in different phases of the dimension stone production process was investigated. This investigation showed that about 51% of all the material extracted from dimension stone quarries turns into waste during the extraction operation, and roughly 41% of the material that arrives at dimension stone processing plants turns into waste during the processing operation. Therefore, the overall recovery rate of the dimension stone production process is approximately 29%, signifying the significant volumes of resources lost and the large amounts of waste generated. The paper also discusses the types of waste generated in different phases of the dimension stones production process, production factors in each case, and solutions that can be adopted to minimize waste generation in each phase of this industry. [ABSTRACT FROM AUTHOR]

This study aimed to examine the impact of poor solid waste management on student's health care at Gondar University of "Tewodros" campus. The study used a mixed-method approach. To recruit sample respondents', both probability and non-probability sampling methods have been employed. In the meantime, the study revealed the sources of solid waste, it is understood that the poorly collected and managed solid wastes of the study area due to the lack of necessary materials and facilities of waste collection, lack of laborers engaged in street sweeping and daily removal of solid waste is now becoming the major causes of environmental problems such as surface and groundwater pollution problems. Besides, the student's health office personnel in the interview approached the general health status of the students on the campus during this year. Accordingly, dysentery, common cold, and typhoid are the most frequently appear disease on the Tewodros campus. Therefore, there should be a "students committee "at the campus level to control illegal dumping and to develop practice and habits of poor waste handling and disposal in the community, and there must be apparent regulation and policy frameworks that pro-hibit poor waste management. [ABSTRACT FROM AUTHOR]

• National scale inventory of amount of waste produced in ready mix concrete plants. • Influence of concrete characteristics on the volume of residue adhered to the drum. • Mapping of the main factors affecting the concrete returned to the plant. • Real-scale parameterization of the waste generation in industrial production. In Brazil, ready-mixed concrete (RMC) suppliers are adopting management strategies to reduce waste generation. This is because of the increasing scarcity of adequate places for the deposition of waste, which raises the associated costs. Therefore, it is necessary to know the actual volume production of residues in order to optimize the implementation of the recycling. The waste produced in RMC plants are mainly in the form of leftover concrete and adhered to the internal part of the drum of the mixer truck. The present study analyzed the data and produced an inventory of the amount of waste generated by of one of the largest Brazilian concrete companies. In parallel, an experimental study was performed in the real conditions of an RMC plant in order to measure the influence of concrete characteristics on the volume of concrete adhered to the drum. The results showed that about 3% of all the produced volume returns to the plant, comprising approximately 1.6% adhered concrete and 1.4% leftover concrete. The study proved that the volume of concrete adhered concrete depends on the cement consumption and the slump. The volume of concrete loaded and the region where the RMC plant is located do not influence those results. The inventory showed that the main cause of concrete leftovers is associated to over order and corresponds to 58% of this volume. [ABSTRACT FROM AUTHOR]

Food waste management (FWM) is considered to be an extremely important social issue besides an environmental one. Worldwide, it is estimated that 1.3 billion t/year of foods are disposed of in landfills (including edible and inedible foods). Moreover, FAO indicated that if food waste (FW) was a country, it could be the 3rd biggest CO2 producer after China and the USA with more than 3.5–4.2 billion of t equivalence CO2. Each citizen in the entire EU produces approximately 179 kg/year FW equal more or less with 600 €/year. This paper focuses on the concept of circular economy (CE) and how can we optimize and improve the production of biogas from UASB-R (upflow anaerobic sludge blanket reactor) using FW and natural minerals (clinoptilolite). The study was elaborated through laboratory scale experiments using different mixtures of FW, liquid waste from slaughterhouse (LWS), and natural clinoptilolite (Cli). The amount of biogas produced and the methane content of biogas were used as indicators in order to monitor and asses the performance of the anaerobic digester. The results of the present study were encouraging towards the use of FW in existing anaerobic treatment plants, suggesting selective collection at source of FW, diversion from landfills, and use as a secondary resource for energy recovery through a transition to a CE. The results indicate that the use of FW with zeolite duplicates the production of CH4 within the same days of production compared with the control sample. [ABSTRACT FROM AUTHOR]

Aim.The results of experimental studies produce siliсatеsodium composite binder of calcareous stone sawing waste, anhydrous sodium silicate, and based on them wood concrete using as an organic filler vine cuttings for the production of heat-insulating, heat-insulating, structural and structural wall material.Methods.The main technological operations of the developed arbalitconcrete are given : preparation of a composite binder; production of organic filler from the vine; preparation of arbolit concrete mass; formation of arbolit concrete mass; low-temperature treatment (drying).Results. It is found that the composite binder derived from waste stone sawing and anhydrous sodium silicate at their joint fine grinding (Ssp = 3000 cm2 / g), acquires binding properties and with the appropriate seal and heat treatment hardens and gains strength characteristics sufficient for making arbolitconcrete using crushed vine.Conclusion. It was determined that arbolitobeton obtained on the basis of the crushed vine and silikatnatrievogo composite binder strength exceeds arbolitobetona from other types of binders and organic fillers of vegetable origin.

The waste management is a dynamically progressive area, with the current trend leading to circular economy scheme. The development in this area requires quality prognosis reflecting the analysed timeframe. The forecast of the waste production and composition of waste is an important aspect with regards to the planning in waste management. However, the regular prognostic methods are not appropriate for these purposes due to short time series of historical data and unavailability of socio-economic data. The paper proposes a general approach via mathematical model for forecasting of future waste-related parameters based on spatially distributed data with hierarchical structure. The approach is based on principles of regression analysis with final balance to ensure the compliance of aggregated data values. The selection of the regression function is a part of mathematical model for high-quality description of data trend. In addition, outlier values are cleared, which occur abundantly in the database. The decomposition of the model into subtasks is performed in order to simpler implementation and reasonable time solvability. The individual algorithm steps are applied to municipal waste production data in the Czech Republic.

We studied the effect of rearing densities of Pacific white shrimp, Litopenaeus vannamei in three densities with three replicate treatments [T 1 : 0.4 million post-larvae (PL) ha −1 , T 2 : 0.5 million PL ha −1 , T 3 : 0.6 million PL ha −1 ] and water cutback approach on rearing environment, water use efficiency, water footprint and production performance. Conditional water exchange was carried out based on water quality parameters. Water quality suitability index was very good (7.5–9.0) up to 13th, 10th and 5th week of culture in T 1 , T 2 and T 3 , respectively; which was attributed to rearing density, smaller-sized shrimp and low early feed input. Optimum rearing density of 50 PL m -2 (T 2 ) led to total water use of 3.25 × 10 4  m 3 . It was seeming as a way to improve shrimp productivity (10.58 t ha −1 120 d −1 ), consumptive water use index (1.72  m 3  kg -1 biomass), total water footprint (1229 m 3  t −1 biomass) and net consumptive water productivity (USD 1.28 m -3 ). L. vannamei culture with low to moderate water exchange as in T 2 , helped uphold water quality suitable for the shrimp growth, improved water use efficiency (0.58 kg biomass m -3 water), minimized sediment load (45.3 m 3  t -1 biomass), effluent outputs (0.63 × 10 4  m 3 ), pumping cost (USD 30.1 t −1 biomass produced), and ratio of output value to the cost of cultivation (1.97). The findings and advancement in knowledge would offer the basis to augment shrimp rearing efforts and the water management approaches will help in preventing the production of waste and effluent while increasing water use efficiency and production performance. [ABSTRACT FROM AUTHOR]

Presently many firms have been forced to take into consideration decreasing material and energy consumption and minimizing waste production. Planning or evaluation of waste collection and recycling systems demands technical and economic performance for materials recovery. Here is the space for life cycle assessment using the individual phases of waste production by the way of diagram of material balance. The research considers specific conditions of waste processing company, orientated to the creation of integral system of waste processing. The results show creation and consequent evaluation of complex material flow. [ABSTRACT FROM AUTHOR]

The article discusses the environmental problems of waste disposal on the tailings pond, "White sea" of "Kaprolaktam" plant, OJSC "SIBUR-Neftekhim", Dzerzhinsk, Nizhny Novgorod region. Currently there is a need for the elimination of the White sea slurry tank used for the storage of sludge from chlorine production plant "Caprolactam", due to its fill. The article presents General characteristics of the plant "Caprolactam", OJSC "SIBUR-Neftekhim" and the White sea slurry tank. Disclosed the production of the plant "Caprolactam", generated from business activities waste production and ways of their utilization. Selected problem areas of the plant "Caprolactam". Studies on the degree of negative impact on the environment of the White sea slurry tank, the amended proposal for the definition of the method of elimination of the tailings pond, "White sea" and presented the project and defined the necessary engineering and reclamation activities.