Search

Carbonaceous materials are promising electrode materials for enzymatic biofuel cells (EBFCs) due to their excellent electrical conductivity, chemical and physical stability and biocompatibility. Design and preparation of carbon materials with a hollow structure and a rough surface are of great significance for immobilization of enzymes both inside and outside the carbon materials for EBFC applications. We report herein the synthesis of novel carbonaceous materials consisting of bamboo-shaped hollow N-doped carbon nanotubes (N-CNTs) and C3N4 nanosheets (denoted as N-CNTs@C3N4) as electrode materials for dual-capture of enzymes in glucose/O2 EBFCs. The combination of one-dimensional N-CNTs with an open structure and two-dimensional C3N4 nanosheets forms a three-dimensional crosslinking network that significantly enhances the immobilization of enzymes, electrode stability, and mass transfer of substrates, thus boosting the EBFC performance. As a result, EBFCs equipped with N-CNTs@C3N4 can generate a high open circuit potential of 0.93 V and output a maximum power density of 0.57 mW cm-2 at 0.47 V. Additionally, the as-fabricated glucose/O2 EBFCs are capable of directly harvesting energy from various soft drinks, which indicates the promising applications of the N-CNTs@C3N4 nanocomposite as an electrode material for EBFCs.

Potassium-ion batteries are potential alternatives to lithium-ion batteries for large-scale energy storage considering the low cost and high abundance of potassium. However, it is challenging to obtain stable electrode materials capable of undergoing long-term potassiation/depotassiation due to the high accumulated stress associated with the huge volume variation of the electrode. Here, we simulate the von Mises stress distributions of four different carbon three-dimensional models under an isotropic initial stress by the finite element method and reveal the critical role of the structure of a hollow multihole bowl on the strain-relaxation behavior. In this regard, nitrogen/oxygen codoped carbon hollow multihole bowls (CHMBs) are synthesized via hydrothermal carbonization coupled with an emulsion-templating strategy using biomass as the carbon source. Consistent with our simulation results, the CHMB anode remains stable for over 1000 cycles and delivers a high reversible capacity of 304 mAh g-1 at 0.1 A g-1. In addition to the reduced stress accumulation, the good electrochemical performances are also attributed to the surface capacitive mechanism and the shortened electron/ion transport distance in CHMBs. In particular, the CHMB composite electrode has a volumetric specific capacity 56% higher than that of hollow spheres due to the high tapped density of the bowl-shaped particles.

Transition metal sulfides are deemed as attractive anode materials for potassium-ion batteries (KIBs) due to their high theoretical capacities based on conversion and alloying reaction. However, the main challenges are the low electronic conductivity, huge volume expansion, and consequent formation of unstable solid electrolyte interphase (SEI) upon potassiation/depotassiation. Herein, zinc sulfide dendrites deeply nested in the tertiary hierarchical structure through a solvothermal-pyrolysis process are designed as an anode material for KIBs. The tertiary hierarchical structure is composed of the primary ultrafine ZnS nanorods, the secondary carbon nanosphere, and the tertiary carbon-encapsulated ZnS subunits nanosphere structure. The architectural design of this material provides a stable diffusion path and enhances effective conductivity from the interior to exterior for both K

Carbonaceous materials are promising electrode materials for enzymatic biofuel cells (EBFCs) due to their excellent electrical conductivity, chemical and physical stability and biocompatibility. Design and preparation of carbon materials with a hollow structure and a rough surface are of great significance for immobilization of enzymes both inside and outside the carbon materials for EBFC applications. We report herein the synthesis of novel carbonaceous materials consisting of bamboo-shaped hollow N-doped carbon nanotubes (N-CNTs) and C3N4 nanosheets (denoted as N-CNTs@C3N4) as electrode materials for dual-capture of enzymes in glucose/O2 EBFCs. The combination of one-dimensional N-CNTs with an open structure and two-dimensional C3N4 nanosheets forms a three-dimensional crosslinking network that significantly enhances the immobilization of enzymes, electrode stability, and mass transfer of substrates, thus boosting the EBFC performance. As a result, EBFCs equipped with N-CNTs@C3N4 can generate a high open circuit potential of 0.93 V and output a maximum power density of 0.57 mW cm-2 at 0.47 V. Additionally, the as-fabricated glucose/O2 EBFCs are capable of directly harvesting energy from various soft drinks, which indicates the promising applications of the N-CNTs@C3N4 nanocomposite as an electrode material for EBFCs.

Rechargeable alkali metal-ion batteries (AMIBs) are receiving significant attention owing to their high energy density and low weight. The performance of AMIBs is highly dependent on the electrode materials. It is, therefore, quite crucial to explore suitable electrode materials that can fulfil the future requirements of AMIBs. Herein, a hierarchical hybrid yolk-shell structure of carbon-coated iron selenide microcapsules (FeSe2 @C-3 MCs) is prepared via facile hydrothermal reaction, carbon-coating, HCl solution etching, and then selenization treatment. When used as the conversion-typed anode materials (CTAMs) for AMIBs, the yolk-shell FeSe2 @C-3 MCs show advantages. First, the interconnected external carbon shell improves the mechanical strength of electrodes and accelerates ionic migration and electron transmission. Second, the internal electroactive FeSe2 nanoparticles effectively decrease the extent of volume expansion and avoid pulverization when compared with micro-sized solid FeSe2 . Third, the yolk-shell structure provides sufficient inner void to ensure electrolyte infiltration and mobilize the surface and near-surface reactions of electroactive FeSe2 with alkali metal ions. Consequently, the designed yolk-shell FeSe2 @C-3 MCs demonstrate enhanced electrochemical performance in lithium-ion batteries, sodium-ion batteries, and potassium-ion batteries with high specific capacities, long cyclic stability, and outstanding rate capability, presenting potential application as universal anodes for AMIBs.

The pyrrhotite Fe

Transition metal selenides (TMS), on account of their relatively high theoretical capacity, unique electrical properties, easy compositing and low cost, are considered to be a candidate anode material for potassium-ion batteries. However, the cycling stability of TMS is unsatisfactory owing to the large intercalation/deintercalation of K ions. Herein, a CoSe