Search

Background: Enterococcus faecalis (E. faecalis) is the most recovered species from the root canals after failed root canal treatment. Calcium phosphate bone cement (CPC) scaffold is promising for applications in endodontic treatment as a kind of root canal sealer. Graphene oxide (GO) has been extensively considered as a kind of promising nano-materials for antibacterial applications. In the present study, an injectable CPC-chitosan paste containing GO was developed for promising endodontic therapy. The antibacterial properties of this paste against E. faecalis biofilms as well as the support for human dental pulp stem cells (hDPSCs) were investigated. Methods: CPC-chitosan composite with or without GO injectable scaffold was fabricated. The hDPSC growth and viability on scaffolds were investigated by live/dead assay. Antibacterial effects against E. faecalis biofilms were determined in clinical detin block samples. Results: The antibacterial CPC-chitosan-GO disks had excellent hDPSC support with the percentages of live cells at around 90%. CPC-chitosan-GO also had greater antibacterial activity on E. faecalis than that of CPC-chitosan control using detin block models (p < 0.05). Conclusions: The injectable CPC-chitosan-GO paste had strong effects on inhibition E. faecalis and hDPSC support, which could fill the void of adjusting paste to the defect and shaping in situ for promising endodontic therapy. [ABSTRACT FROM AUTHOR]

Fluoride (F)-releasing restoratives typically are either weak mechanically or release only low levels of F ions. The objectives of this study were to: (1) develop a novel photo-cured nanocomposite with strong mechanical properties and high levels of sustained F ion release via a two-step "co-precipitation + spray-drying" technique to synthesize CaF 2 nanoparticles (nCaF 2); and (2) investigate the effect of spray-drying treatment after co-precipitation of nCaF 2 on mechanical properties and F ion release of composite. Two types of CaF 2 particles were synthesized: A co-precipitation method yielded CaF 2 cp; "co-precipitation + spray-drying" yielded nCaF 2 cpsd. Composites were fabricated with fillers of: (1) 0% CaF 2 + 70% glass; (2) 10% CaF 2 cp + 60% glass; (3) 15% CaF 2 cp + 55% glass; (4) 20% CaF 2 cp + 50% glass; (5) 10% nCaF 2 cpsd + 60% glass; (6) 15% nCaF 2 cpsd + 55% glass; and (7) 20% nCaF 2 cpsd + 50% glass. A commercial F-releasing nanocomposite served as control. The nCaF 2 cpsd had much smaller particle size (median = 32 nm) and narrower distribution (22–57 nm) than CaF 2 cp (median = 5.25 μm, 162 nm–67 μm). The composite containing nCaF 2 cpsd had greater flowability, flexural strength, elastic modulus and hardness than CaF 2 cp composite and commercial control composite. At 84-day immersion in water, the nanocomposites containing 20% nCaF 2 cpsd had 65 times higher cumulative F release, and 77 times greater long-term F-release rate, than commercial control. A novel two-step "co-precipitation + spray-drying" technique of synthesizing nCaF 2 was developed. The photo-cured nanocomposite containing 20% nCaF 2 cpsd possessed strong mechanical properties and excellent long-term F-release ability, and hence is promising for dental restoration applications to inhibit secondary caries. [ABSTRACT FROM AUTHOR]

Abstract Objective There has been no report on the effect of incorporating protein repellent 2-methacryloyloxyethyl phosphorylcholine (MPC) into a composite containing nanoparticles of amorphous calcium phosphate (NACP) on calcium (Ca) and phosphate (P) ion rechargeability. The objectives of this study were to develop a Ca and P ion-rechargeable and protein-repellent composite for the first time, and investigate the effects of MPC and NACP on mechanical properties, protein-repellency, anti-biofilm effects, and Ca and P ion recharge and re-release. Methods NACP were synthesized using a spray-drying technique. The resin contained ethoxylated bisphenol A dimethacrylate (EBPADMA) and pyromellitic glycerol dimethacrylate (PMGDM). Three NACP composites were made with 0 (control), 1.5%, and 3% of MPC. NACP (20%) and glass particles (50%) were also added into the resin. Protein adsorption was measured using a micro-bicinchoninic acid (BCA) method. A human saliva microcosm biofilm model was used to determine biofilm metabolic activity, lactic acid, and colony-forming units (CFU). Ca and P ion recharge and re-release were measured using a spectrophotometric method. Results Flexural strengths and moduli of CaP-rechargeable composites matched those of a commercial composite without CaP rechargeability (p > 0.1). Adding 1.5% and 3% MPC reduced protein adsorption to 1/3 and 1/5, respectively, that of commercial composite (p < 0.05). Adding 3% MPC suppressed biofilm metabolic activity and lactic acid production, and reduced biofilm CFU by nearly 2 logs. All three NACP composites had excellent ion rechargeability and higher levels of ion re-releases. One recharge yielded continuous ion release for 21 days. The release was maintained at the same level with increasing number of recharge cycles, indicating long-term ion release. Incorporation of MPC did not compromise the CaP ion rechargeability. Significance Incorporating 3% MPC into NACP nanocomposite greatly reduced protein adsorption, biofilm growth and lactic acid, decreasing biofilm CFU by nearly 2 logs, without compromising Ca and P recharge. This protein-repellent NACP-MPC rechargeable composite with long-term remineralization is promising for tooth restorations to inhibit secondary caries. [ABSTRACT FROM AUTHOR]

Enamel demineralization is destructive, esthetically compromised, and costly complications for orthodontic patients. Nano-sized amorphous calcium phosphate (NACP) has been explored to address this challenge. The 20% NACP-loaded ortho-cement notably exhibited favorable behavior on reducing demineralization of enamel around brackets in a caries model designed to simulate the carious attack. The 20% NACP-loaded ortho-cement markedly promotes higher calcium and phosphate release at a low pH, and the mineral loss was almost two fold lower and carious lesion depth decreased the by 1/3. This novel approach is promising co-adjuvant route for prevention of dental caries dissemination in millions of patients under orthodontic treatment. [ABSTRACT FROM PUBLISHER]

Objective Secondary caries is a primary reason for dental restoration failures. The objective of this study was to investigate the remineralization of human dentin lesions in vitro via restorations using nanocomposites containing nanoparticles of amorphous calcium phosphate (NACP) or NACP and tetracalcium phosphate (TTCP) for the first time. Methods NACP was synthesized by a spray-drying technique and incorporated into a resin consisting of ethoxylated bisphenol A dimethacrylate (EBPADMA) and pyromellitic glycerol dimethacrylate (PMGDM). After restoring the dentin lesions with nanocomposites as well as a non-releasing commercial composite control, the specimens were treated with cyclic demineralization (pH 4, 1 h per day) and remineralization (pH 7, 23 h per day) for 4 or 8 weeks. Calcium (Ca) and phosphate (P) ion releases from composites were measured. Dentin lesion remineralization was measured at 4 and 8 weeks by transverse microradiography (TMR). Results Lowering the pH increased ion release of NACP and NACP-TTCP composites. At 56 days, the released Ca concentration in mmol/L (mean ± SD; n = 3) was (13.39 ± 0.72) at pH 4, much higher than (1.19 ± 0.06) at pH 7 (p < 0.05). At 56 days, P ion concentration was (5.59 ± 0.28) at pH 4, much higher than (0.26 ± 0.01) at pH 7 (p < 0.05). Quantitative microradiography showed typical subsurface dentin lesions prior to the cyclic demineralization/remineralization treatment, and dentin remineralization via NACP and NACP-TTCP composites after 4 and 8 weeks of treatment. At 8 weeks, NACP nanocomposite achieved dentin lesion remineralization (mean ± SD; n = 15) of (48.2 ± 11.0)%, much higher than (5.0 ± 7.2)% for dentin in commercial composite group after the same cyclic demineralization/remineralization regimen (p < 0.05). Significance Novel NACP-based nanocomposites were demonstrated to achieve dentin lesion remineralization for the first time. These results, coupled with acid-neutralization and good mechanical properties shown previously, indicate that the NACP-based nanocomposites are promising for restorations to inhibit caries and protect tooth structures. [ABSTRACT FROM AUTHOR]

The objectives of this study were to develop a novel method to remineralize dentin lesions, and investigate the remineralization effects of poly (amido amine) (PAMAM) dendrimer plus a bonding agent with nanoparticles of amorphous calcium phosphate (NACP) in a cyclic artificial saliva/lactic acid environment for the first time. Dentin lesions were produced via phosphoric acid. Four groups were tested: (1) dentin control, (2) dentin with PAMAM, (3) dentin with NACP bonding agent, and (4) dentin with PAMAM plus NACP bonding agent. Specimens were treated with cyclic artificial saliva/lactic acid. The remineralized dentin was examined using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), hardness and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). NACP bonding agent yielded a dentin shear bond strength similar to commercial controls (Prime & Bond NT, Dentsply; Scotchbond Multi-purpose, 3M) ( p > 0.1). Increasing NACP in bonding agent from 0 to 40% did not affect bond strength. NACP bonding agent neutralized the acid and released Ca ions with concentrations of 4 to 20 mmol/L, and P ions of 2 to 9 mmol/L. PAMAM or NACP bonding agent alone achieved slight remineralization. The PAMAM + NACP group achieved the greatest dentin remineralization p < 0.05). At 20 days, PAMAM + NACP increased the hardness of pre-demineralized dentin to reach the normal dentin hardness ( p > 0.1). In conclusion, superior remineralization of PAMAM + NACP bonding agent was demonstrated for the first time. PAMAM + NACP bonding agent induced dentin remineralization under acid challenge, when conventional remineralization methods such as PAMAM alone did not work well. The novel PAMAM + NACP bonding agent method is promising to improve the longevity of resin-dentin bonds, inhibit caries, and protect teeth. [ABSTRACT FROM AUTHOR]

Objectives The objective of this study was to investigate the effects of poly (amido amine) (PAMAM), composite with nanoparticles of amorphous calcium phosphate (NACP), and the combined PAMAM + NACP nanocomposite treatment, on remineralization of demineralized dentin in a cyclic artificial saliva/lactic acid environment for the first time. Methods Dentin specimens were prepared and demineralized with 37% phosphoric acid for 15 s. Four groups were prepared: (1) dentin control, (2) dentin coated with PAMAM, (3) dentin with NACP composite, (4) dentin with PAMAM + NACP. Specimens were treated with a cyclic artificial saliva/lactic acid regimen for 21 days. Acid neutralization and calcium (Ca) and phosphate (P) ion concentrations were measured. The remineralized dentin specimens were examined by scanning electron microscopy (SEM) and hardness testing. Results NACP nanocomposite had mechanical properties similar to commercial control composites (p > 0.1). NACP composite had acid-neutralization and Ca and P ion release capability. PAMAM or NACP composite each alone achieved remineralization and increased the hardness of demineralized dentin (p < 0.05). PAMAM + NACP nanocomposite achieved the greatest mineral regeneration in demineralized dentin and the greatest hardness increase in demineralized dentin, which approached the hardness of healthy dentin (p > 0.1). Significance The superior remineralization efficacy of PAMAM + NACP was demonstrated for the first time. PAMAM + NACP induced remineralization in demineralized dentin in an acid challenge environment, when conventional remineralization methods such as PAMAM did not work well. The novel PAMAM + NACP composite approach is promising for a wide range of dental applications to inhibit caries and protect tooth structures. [ABSTRACT FROM AUTHOR]

Objectives: The objectives of this study were to develop a self-healing dental composite containing poly(urea-formaldehyde) (PUF) shells with triethylene glycol dimethacrylate (TEGDMA) and N,N-dihydroxyethyl-p-toluidine (DHEPT) as healing liquid, and to investigate the mechanical properties of the composite and its self-healing efficacy after water-aging for 6 months.Methods: PUF microspheres were synthesized encapsulating a TEGDMA-DHEPT healing liquid. Composite containing 30% of a resin matrix and 70% of glass fillers by mass was incorporated with 0%, 2.5%, 5%, 7.5% and 10% of microcapsules. A flexural test was used to measure flexural strength and elastic modulus. A single edge V-notched beam method was used to measure fracture toughness (KIC) and self-healing efficacy. Specimens were water-aged at 37 °C for 1 day to 6 months and then tested for self-healing. Fractured specimens were healed while being immersed in water to examine self-healing efficacy, in comparison with that in air.Results: Incorporation of up to 7.5% of microcapsules into the resin composite achieved effective self-healing, without adverse effects on the virgin mechanical properties of the composite (p>0.1). An excellent self-healing efficacy of 64-77% recovery was obtained (mean±sd; n=6). Six months of water-aging did not decrease the self-healing efficacy compared to 1 day (p>0.1). Exposure to water did not decrease the healing efficacy, compared to that healed in air (p>0.1).Conclusions: A composite was developed with excellent self-healing efficacy even while being immersed in water. The self-healing efficacy did not decrease with increasing water-aging time for 6 months.Clinical Significance: The novel self-healing composite may be promising for dental applications to heal cracks, resist fracture, and increase the durability and longevity. [ABSTRACT FROM AUTHOR]

Objectives Calcium phosphate (CaP) composites with Ca and P ion release can remineralize tooth lesions and inhibit caries. But the ion release lasts only a few months. The objectives of this study were to develop rechargeable CaP dental composite for the first time, and investigate the Ca and P recharge and re-release of composites with nanoparticles of amorphous calcium phosphate (NACP) to achieve long-term inhibition of caries. Methods Three NACP nanocomposites were fabricated with resin matrix of: (1) bisphenol A glycidyl dimethacrylate (BisGMA) and triethylene glycol dimethacrylate (TEGDMA) at 1:1 mass ratio (referred to as BT group); (2) pyromellitic glycerol dimethacrylate (PMGDM) and ethoxylated bisphenol A dimethacrylate (EBPADMA) at 1:1 ratio (PE group); (3) BisGMA, TEGDMA, and Bis[2-(methacryloyloxy)ethyl] phosphate (BisMEP) at 2:1:1 ratio (BTM group). Each resin was filled with 20% NACP and 50% glass particles, and the composite was photo-cured. Specimens were tested for flexural strength and elastic modulus, Ca and P ion release, and Ca and P ion recharge and re-release. Results NACP nanocomposites had strengths 3-fold of, and elastic moduli similar to, commercial resin-modified glass ionomer controls. CaP ion recharge capability was the greatest for PE group, followed by BTM group, with BT group being the lowest ( p < 0.05). For each recharge cycle, CaP re-release reached similarly high levels, showing that CaP re-release did not decrease with more recharge cycles. After six recharge/re-release cycles, NACP nanocomposites without further recharge had continuous CaP ion release for 42 d. Significance Novel rechargeable CaP composites achieved long-term and sustained Ca and P ion release. Rechargeable NACP nanocomposite is promising for caries-inhibiting restorations, and the Ca and P ion recharge and re-release method has wide applicability to dental composites, adhesives, cements and sealants to achieve long-term caries-inhibition. [ABSTRACT FROM AUTHOR]

Objective Bulk fracture is one of the primary reasons for resin-based dental restoration failures. To date, there has been no report on the use of polymerizable dental monomers with acceptable biocompatibility to develop a resin with substantial self-healing capability. The objectives of this study were to: (1) develop a self-healing resin containing microcapsules with triethylene glycol dimethacrylate (TEGDMA)- N , N -dihydroxyethyl- p -toluidine (DHEPT) healing liquid in poly(urea-formaldehyde) (PUF) shells for the first time, and (2) determine the physical and mechanical properties, self-healing efficiency, and fibroblast cytotoxicity. Methods Microcapsules of polymerizable TEGDMA-DHEPT in PUF were prepared via an in situ polymerization method. Microcapsules were added into a BisGMA-TEGDMA resin at microcapsule mass fractions of 0%, 5%, 10%, 15% and 20%. A flexural test was used to measure composite strength and elastic modulus. A single edge V-notched beam method was used to measure fracture toughness K IC and self-healing efficiency. Results Flexural strength and elastic modulus (mean ± sd; n = 6) of resin containing 5–15% microcapsules were similar to control without microcapsules ( p > 0.1). Adding microcapsules into the resin increased the virgin K IC , which was about 40% higher at 15% microcapsules than that with 0% microcapsules ( p < 0.05). Specimens were fractured and healed, then fractured again to measure the healed K IC . A self-healing efficiency of about 65% in K IC recovery was obtained with 10–20% microcapsules. All specimens with 0–20% microcapsules had fibroblast viability similar to control without resin eluents ( p > 0.1). Significance Self-healing dental resin containing microcapsules with polymerizable TEGDMA-DHEPT healing liquid in PUF shells were prepared for the first time with excellent self-healing capability. These microcapsules and self-healing resins containing them may be promising for dental restorations to heal cracks/damage and increase durability. [ABSTRACT FROM AUTHOR]

Objectives: The tooth-resin bond is the weak link of restoration, with secondary caries as a main reason for failure. Calcium phosphate-containing resins are promising for remineralization; however, calcium (Ca) and phosphate (P) ion releases last only a couple of months. The objectives of this study were to develop the first rechargeable CaP bonding agent and investigate the key factors that determine CaP ion recharge and re-release.Methods: Nanoparticles of amorphous calcium phosphate (NACP) were synthesized. Pyromellitic glycerol dimethacrylate (PMGDM), ethoxylated bisphenol-A dimethacrylate (EBPADMA), 2-hydroxyethyl methacrylate (HEMA), and bisphenol-A glycidyl dimethacrylate (BisGMA) were used to synthesize three adhesives (denoted PE, PEH and PEHB). NACP were mixed into adhesive at 0-30% by mass. Dentin shear bond strengths were measured. Adhesive specimens were tested for Ca and P initial ion release. Then the ion-exhausted specimens were immersed in Ca and P solution to recharge the specimens, and the recharged specimens were then used to measure ion re-release for 7 days as one cycle. Then these specimens were again recharged and the re-release was measured for 7 days as the second cycle. Three recharge/re-release cycles were tested.Results: PEHB had the highest dentin bond strength (p<0.05). Increasing NACP content from 0 to 30% did not affect dentin bond strength (p>0.1), but increased CaP release and re-release (p<0.05). PEHB-NACP had the greatest recharge/re-release, and PE-NACP had the least (p<0.05). Ion release remained high and did not decrease with increasing the number of recharge/re-release cycles (p>0.1). After the third cycle, specimens without further recharge had continuous CaP ion release for 2-3 weeks.Significance: Rechargeable CaP bonding agents were developed for the first time to provide long-term Ca and P ions to promote remineralization and reduce caries. Incorporation of NACP into adhesive had no negative effect on dentin bond strength. Increasing NACP filler level increased the ion recharge and re-release capability. The new CaP recharge method and PMGDM-EBPADMA-NACP composition may have wide application in adhesives, composites and cements, to combat caries and remineralize lesions. [ABSTRACT FROM AUTHOR]

Objectives Secondary caries at the tooth-restoration margins remains a main reason for restoration failure. The objectives of this study were to: (1) combine protein-repellent 2-methacryloyloxyethyl phosphorylcholine (MPC) with quaternary ammonium dimethylaminohexadecyl methacrylate (DMAHDM) to develop a new dental adhesive with double benefits of protein-repellent and antibacterial capabilities for the first time; and (2) investigate the effects on protein adsorption, anti-biofilm activity, and dentin bond strength. Methods MPC and DMAHDM were incorporated into Scotchbond Multi-Purpose (SBMP) primer and adhesive. Dentin shear bond strengths were measured using extracted human molars. Protein adsorption onto the adhesive resin surfaces was determined by the micro bicinchoninic acid (BCA) method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate biofilm metabolic activity, colony-forming unit (CFU) counts, lactic acid production and live/dead staining of biofilms on resins. Results Incorporation of 7.5% MPC and 5% DMAHDM into primer and adhesive did not adversely affect the dentin shear bond strength ( p > 0.1). The resin with 7.5% MPC + 5% DMAHDM had protein adsorption that was nearly 20-fold less than SBMP control ( p < 0.05). The resin with 7.5% MPC + 5% DMAHDM had much stronger antibacterial effects than using MPC or DMAHDM alone ( p < 0.05). Biofilm CFU counts on the resin with 7.5% MPC + 5% DMAHDM were reduced by more than 4 orders of magnitude, compared to SBMP control. Significance The use of double agents (protein-repellent MPC + antibacterial DMAHDM) in dental adhesive achieved much stronger inhibition of biofilms than using each agent alone. The novel protein-repellent and antibacterial bonding agent is promising to reduce biofilm/plaque buildup and reduce recurrent caries at the tooth-restoration margins. [ABSTRACT FROM AUTHOR]

Objectives: Fracture and secondary caries are the primary reasons for dental restoration failure. The objective of this study was to develop a self-healing composite to heal cracks, while containing dimethylaminohexadecyl methacrylate (DMAHDM) for antibacterial function and nanoparticles of amorphous calcium phosphate (NACP) for remineralization. Methods: Microcapsules were synthesized with poly(urea-formaldehyde) (PUF) shells containing triethylene glycol dimethacrylate (TEGDMA) and N,N-dihydroxyethyl-p-toluidine (DHEPT) as healing liquid. Composite contained 20 mass% of NACP and 35% glass fillers. In addition, composite contained 0%, 2.5%, 5%, 7.5%, or 10% of microcapsules. A single edge Vnotched beam method measured fracture toughness (KIC) and self-healing efficiency. A dental plaque microcosm biofilm model was used to test the antibacterial properties. Results: Incorporation of microcapsules up to 7.5% into the composite did not adversely affect the mechanical properties (p > 0.1). Successful self-healing was achieved, with KIC recovery of 65-81% (mean ± sd; n = 6) to regain the load-bearing capability after composite fracture. The self-healing DMAHDM-NACP composite displayed a strong antibacterial potency, inhibiting biofilm viability and lactic acid production, and reducing colony-forming units by 3-4 orders of magnitude, compared to control composite without DMAHDM. Conclusions: A dental composite was developed with triple benefits of self-healing after fracture, antibacterial activity, and remineralization capability for the first time. Clinical significance: The self-healing, antibacterial and remineralizing composite may be promising for tooth cavity restorations to combat bulk fracture and secondary caries. The method of using triple agents (self-healing microcapsules, DMAHDM, and NACP) may have wide applicability to other dental composites, adhesives, sealants and cements. [ABSTRACT FROM AUTHOR]

Objective Recurrent caries at the margins is a primary reason for restoration failure. The objectives of this study were to develop bonding agent with the double benefits of antibacterial and remineralizing capabilities, to investigate the effects of NACP filler level and solution pH on Ca and P ion release from adhesive, and to examine the antibacterial and dentin bond properties. Methods Nanoparticles of amorphous calcium phosphate (NACP) and a quaternary ammonium monomer (dimethylaminododecyl methacrylate, DMADDM) were synthesized. Scotchbond Multi-Purpose (SBMP) primer and adhesive served as control. DMADDM was incorporated into primer and adhesive at 5% by mass. NACP was incorporated into adhesive at filler mass fractions of 10%, 20%, 30% and 40%. A dental plaque microcosm biofilm model was used to test the antibacterial bonding agents. Calcium (Ca) and phosphate (P) ion releases from the cured adhesive samples were measured vs. filler level and solution pH of 7, 5.5 and 4. Results Adding 5% DMADDM and 10-40% NACP into bonding agent, and water-aging for 28 days, did not affect dentin bond strength, compared to SBMP control at 1 day (p>0.1). Adding DMADDM into bonding agent substantially decreased the biofilm metabolic activity and lactic acid production. Total microorganisms, total streptococci, and mutans streptococci were greatly reduced for bonding agents containing DMADDM. Increasing NACP filler level from 10% to 40% in adhesive increased the Ca and P ion release by an order of magnitude. Decreasing solution pH from 7 to 4 increased the ion release from adhesive by 6-10 folds. Significance Bonding agents containing antibacterial DMADDM and remineralizer NACP were formulated to have Ca and P ion release, which increased with NACP filler level from 10% to 40% in adhesive. NACP adhesive was "smart" and dramatically increased the ion release at cariogenic pH 4, when these ions would be most-needed to inhibit caries. Therefore, bonding agent containing DMADDM and NACP may be promising to inhibit biofilms and remineralize tooth lesions thereby increasing the restoration longevity. [ABSTRACT FROM AUTHOR]

Abstract: Objective: Quaternary amine charge density is important because when the negatively charged bacteria contact the positive quaternary amine charge, the electric balance is disturbed and the bacterium could be disrupted. There has been no report on the effects of charge density on the antibacterial efficacy of dental bonding agents. The objective of this study was to synthesize a new quaternary ammonium methacrylate, and investigate the effects of charge density of bonding agent on bacteria early-attachment, biofilm colony-forming units (CFU) and dentin bond strength. Methods: Dimethylaminododecyl methacrylate (DMAHDM) with an alkyl chain length of 16 was synthesized and mixed into Scotchbond Multi-Purpose adhesive and primer (SBMP) at mass fractions of 0%, 2.5%, 5%, 7.5%, and 10%. A microtensile dentin bond test was performed. The density of quaternary ammonium groups was measured using a fluorescein dye method. Streptococcus mutans (S. mutans) early-attachment was examined at 4h, and biofilm colony-forming units (CFU) were measured at 2 days. Results: All groups had similar microtensile bonding strengths (mean±sd; n =40) of about 60MPa (p >0.1). Quaternary amine charge density of bonding agents monotonically increased with increasing DMAHDM mass fraction. Bacteria early-attachment coverage greatly decreased with increasing DMAHDM content in the resin. Biofilm CFU at 10% DMAHDM was reduced by more than 4log, compared to SBMP control. Charge density of bonding agent was inversely proportional to bacteria early-attachment coverage and biofilm CFU. Significance: Increasing the quaternary amine charge density of dentin bonding agent resin was shown to greatly reduce S. mutans attachment and decrease biofilm CFU by four orders of magnitude, without compromising the dentin bond strength. The new DMAHDM is promising for use in bonding agents and other antibacterial restorative materials to inhibit caries. [Copyright &y& Elsevier]

Abstract: Objectives: Antibacterial primer and adhesive are promising to inhibit biofilms and caries. Since restorations in vivo are exposed to saliva, one concern is the attenuation of antibacterial activity due to salivary pellicles. The objective of this study was to investigate the effects of salivary pellicles on bonding agents containing a new monomer dimethylaminododecyl methacrylate (DMADDM) or nanoparticles of silver (NAg) against biofilms for the first time. Methods: DMADDM and NAg were synthesized and incorporated into Scotchbond Multi-Purpose adhesive and primer. Specimens were either coated or not coated with salivary pellicles. A microcosm biofilm model was used with mixed saliva from ten donors. Two types of culture medium were used: an artificial saliva medium (McBain), and Brain Heart Infusion (BHI) medium without salivary proteins. Metabolic activity, colony-forming units (CFU), and lactic acid production of plaque microcosm biofilms were measured (n =6). Results: Bonding agents containing DMADDM and NAg greatly inhibited biofilm activities, even with salivary pellicles. When using BHI, the pre-coating of salivary pellicles on resin surfaces significantly decreased the antibacterial effect (p <0.05). When using artificial saliva medium, pre-coating of salivary pellicles on resin did not decrease the antibacterial effect. These results suggest that artificial saliva yielded medium-derived pellicles on resin surfaces, which provided attenuating effects on biofilms similar to salivary pellicles. Compared with the commercial control, the DMADDM-containing bonding agent reduced biofilm CFU by about two orders of magnitude. Significance: Novel DMADDM- and NAg-containing bonding agents substantially reduced biofilm growth even with salivary pellicle coating on surfaces, indicating a promising usage in saliva-rich environment. DMADDM and NAg may be useful in a wide range of primers, adhesives and other restoratives to achieve antibacterial and anti-caries capabilities. [Copyright &y& Elsevier]

Objectives: The objectives of this study were to investigate: (1) the antibacterial activity of two antibacterial monomers, dimethylaminododecyl methacrylate (DMADDM) and dimethylammoniumethyl dimethacrylate (DMAEDM), against eight different species of oral pathogens for the first time; (2) the cytotoxicity of DMAEDM and DMADDM. Methods: DMAEDM and DMADDM were synthesized by reacting a tertiary amine group with an organo-halide. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against eight species of bacteria were tested. Time-kill determinations were performed to examine the bactericidal kinetics. Cytotoxicity of monomers on human gingival fibroblasts (HGF) was assessed using a methyl thiazolyltetrazolium assay and live/ dead viability assay. Results: DMADDM showed strong bactericidal activity against all bacteria, with MIC of 1.2- 9.8 μ0g/mL. DMAEDM had MIC of 20-80 μg/mL. Time-kill determinations indicated that DMADDM and DMAEDM had rapid killing effects against eight species of bacteria, and eliminated all bacteria in 30 min at the concentration of 4-fold MBC. Median lethal concentration for DMADDM and DMAEDM was between 20 and 40 μg/mL, which was 20-fold higher than 1-2 μg/mL for BisGMA control. Conclusions: DMAEDM and DMADDM were tested in time-kill assay against eight species of oral bacteria for the first time. Both were effective in bacteria-inhibition, but DMADDM had a higher potency than DMAEDM. Different killing efficacy was found against different bacteria species. DMAEDM and DMADDM had much lower cytotoxicity than BisGMA. Therefore, DMADDM and DMAEDM are promising for use in bonding agents and other restorative/ preventive materials to combat a variety of oral pathogens [ABSTRACT FROM AUTHOR]

Abstract: Objectives: Composites are the principal material for tooth cavity restorations due to their esthetics and direct-filling capabilities. However, composites accumulate biofilms in vivo, and secondary caries due to biofilm acids is the main cause of restoration failure. The objectives of this study were to: (1) synthesize new antibacterial monomers and (2) develop nanocomposite containing nanoparticles of amorphous calcium phosphate (NACP) and antibacterial monomer. Methods: Two new antibacterial monomers were synthesized: dimethylaminohexane methacrylate (DMAHM) with a carbon chain length of 6, and dimethylaminododecyl methacrylate (DMADDM) with a chain length of 12. A spray-drying technique was used to make NACP. DMADDM was incorporated into NACP nanocomposite at mass fractions of 0%, 0.75%, 1.5%, 2.25% and 3%. A flexural test was used to measure composite strength and elastic modulus. A dental plaque microcosm biofilm model with human saliva as inoculum was used to measure viability, metabolic activity, and lactic acid production of biofilms on composites. Results: The new DMAHM was more potent than a previous quaternary ammonium dimethacrylate (QADM). DMADDM was much more strongly antibacterial than DMAHM. The new DMADDM–NACP nanocomposite had strength similar to that of composite control (p >0.1). At 3% DMADDM in the composite, the metabolic activity of adherent biofilms was reduced to 5% of that on composite control. Lactic acid production by biofilms on composite containing 3% DMADDM was reduced to only 1% of that on composite control. Biofilm colony-forming unit (CFU) counts on composite with 3% DMADDM were reduced by 2–3 orders of magnitude. Significance: New antibacterial monomers were synthesized, and the carbon chain length had a strong effect on antibacterial efficacy. The new DMADDM–NACP nanocomposite possessed potent anti-biofilm activity without compromising load-bearing properties, and is promising for antibacterial and remineralizing dental restorations to inhibit secondary caries. [Copyright &y& Elsevier]

Abstract: Objective: Antibacterial primer and adhesive are promising to help combat biofilms and recurrent caries. The objectives of this study were to compare novel bonding agent containing quaternary ammonium dimethacrylate (QADM) with bonding agent containing nanoparticles of silver (NAg) in antibacterial activity, contact-inhibition vs. long-distance inhibition, glucosyltransferases (gtf) gene expressions, and cytotoxicity for the first time. Methods: QADM and NAg were incorporated into Scotchbond Multi-Purpose adhesive and primer. Microtensile dentin bond strength was measured. Streptococcus mutans (S. mutans) biofilm on resin surface (contact-inhibition) as well as S. mutans in culture medium away from the resin surface (long-distance inhibition) were tested for metabolic activity, colony-forming units (CFUs), lactic acid production, and gtf gene expressions. Eluents from cured primer/adhesive samples were used to examine cytotoxicity against human gingival fibroblasts. Results: Bonding agent with QADM greatly reduced CFU and lactic acid of biofilms on the resin surface (p <0.05), while having no effect on S. mutans in culture medium away from the resin surface. In contrast, bonding agent with NAg inhibited not only S. mutans on the resin surface, but also S. mutans in culture medium away from the resin surface. Bonding agent with QADM suppressed gtfB, gtfC and gtfD gene expressions of S. mutans on its surface, but not away from its surface. Bonding agent with NAg suppressed S. mutans gene expressions both on its surface and away from its surface. Bonding agents with QADM and NAg did not adversely affect microtensile bond strength or fibroblast cytotoxicity, compared to control (p >0.1). Significance: QADM-containing adhesive had contact-inhibition and inhibited bacteria on its surface, but not away from its surface. NAg-containing adhesive had long-distance killing capability and inhibited bacteria on its surface and away from its surface. The novel antibacterial adhesives are promising for caries-inhibition restorations, and QADM and NAg could be complimentary agents in inhibiting bacteria on resin surface as well as away from resin surface. [Copyright &y& Elsevier]

Objectives: The main reason for restoration failure is secondary caries caused by biofilm acids. Replacing the failed restorations accounts for 50-70% of all operative work. The objectives of this study were to incorporate a new quaternary ammonium monomer (dimethylaminododecyl methacrylate, DMADDM) and nanoparticles of silver (NAg) into a primer and an adhesive, and to investigate their effects on antibacterial and dentin bonding properties. Methods: Scotchbond Multi-Purpose (SBMP) served as control. DMADDM was synthesized and incorporated with NAg into primer/adhesive. A dental plaque microcosm biofilm model with human saliva was used to investigate metabolic activity, colony-forming units (CFU), and lactic acid. Dentin shear bond strengths were measured. Results: Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the new DMADDM were orders of magnitude lower than those of a previous quaternary ammonium dimethacrylate (QADM). Uncured primer with DMADDM had much larger inhibition zones than QADM (p < 0.05). Cured primer/adhesive with DMADDM-NAg greatly reduced biofilm metabolic activity (p < 0.05). Combining DMADDM with NAg in primer/adhesive resulted in less CFU than DMADDM alone (p < 0.05). Lactic acid production by biofilms was reduced by 20- fold via DMADDM-NAg, compared to control. Incorporation of DMADDM and NAg into primer/adhesive did not adversely affect dentin bond strength. Conclusions: A new antibacterial monomer DMADDM was synthesized and incorporated into primer/adhesive for the first time. The bonding agents are promising to combat residual bacteria in tooth cavity and invading bacteria at tooth-restoration margins to inhibit caries. DMADDM and NAg are promising for use into a wide range of dental adhesive systems and restoratives. [ABSTRACT FROM AUTHOR]

Abstract: Objectives: Secondary caries at the restoration margins remains the main reason for failure. Although calcium phosphate (CaP) composites are promising for caries inhibition, there has been no report of CaP composite to inhibit caries in situ. The objectives of this study were to investigate the caries-inhibition effect of nanocomposite containing nanoparticles of amorphous calcium phosphate (NACP) in a human in situ model for the first time, and to determine colony-forming units (CFU) and Ca and P ion concentrations of biofilms on the composite restorations. Methods: NACP with a mean particle size of 116nm were synthesized via a spray-drying technique. Two composites were fabricated: NACP nanocomposite, and control composite filled with glass particles. Twenty-five volunteers wore palatal devices containing bovine enamel slabs with cavities restored with NACP or control composite. After 14 days, the adherent biofilms were collected for analyses. Transverse microradiography determined the enamel mineral profiles at the margins, and the enamel mineral loss ΔZ was measured. Results: NACP nanocomposite released Ca and P ions and the release significantly increased at cariogenic low pH (p <0.05). Biofilms on NACP nanocomposite contained higher Ca (p =0.007) and P ions (p =0.005) than those of control (n =25). There was no significant difference in biofilm CFU between the two composites (p >0.1). Microradiographs showed typical subsurface lesions in enamel next to control composite, but much less lesion around NACP nanocomposite. Enamel mineral loss ΔZ (mean±sd; n =25) around NACP nanocomposite was 13.8±9.3μm, much less than 33.5±19.0μm of the control (p =0.001). Significance: Novel NACP nanocomposite substantially reduced caries formation in a human in situ model for the first time. Enamel mineral loss at the margins around NACP nanocomposite was less than half of the mineral loss around control composite. Therefore, the Ca and P ion-releasing NACP nanocomposite is promising for caries-inhibiting restorations. [Copyright &y& Elsevier]

Abstract: Objectives: Fluoride (F) releasing dental restoratives are promising to promote remineralization and combat caries. The objectives of this study were to develop nanocomposite containing calcium fluoride nanoparticles (nCaF2), and to investigate the long-term mechanical durability including wear, thermal-cycling and long-term water-aging behavior. Methods: Two types of fillers were used: nCaF2 with a diameter of 53nm, and glass particles of 1.4μm. Four composites were fabricated with fillers of: (1) 0% nCaF2 +65% glass; (2) 10% nCaF2 +55% glass; (3) 20% nCaF2 +45% glass; (4) 30% nCaF2 +35% glass. Three commercial materials were also tested. Specimens were subjected to thermal-cycling between 5°C and 60°C for 105 cycles, three-body wear for 4×105 cycles, and water-aging for 2 years. Results: After thermal-cycling, the nCaF2 nanocomposites had flexural strengths in the range of 100–150MPa, five times higher than the 20–30MPa for resin-modified glass ionomer (RMGI). The wear scar depth showed an increasing trend with increasing nCaF2 filler level. Wear of nCaF2 nanocomposites was within the range of wear for commercial controls. Water-aging decreased the strength of all materials. At 2 years, flexural strength was 94MPa for nanocomposite with 10% nCaF2, 60MPa with 20% nCaF2, and 48MPa with 30% nCaF2. They are 3–6 fold higher than the 15MPa for RMGI (p <0.05). SEM revealed air bubbles and cracks in a RMGI, while composite control and nCaF2 nanocomposites appeared dense and solid. Significance: Combining nCaF2 with glass particles yielded nanocomposites with long-term mechanical properties that were comparable to those of a commercial composite with little F release, and much better than those of RMGI controls. These strong long-term properties, together with their F release being comparable to RMGI as previously reported, indicate that the nCaF2 nanocomposites are promising for load-bearing and caries-inhibiting restorations. [Copyright &y& Elsevier]

Abstract: Objectives: Previous studies have developed calcium phosphate and fluoride releasing composites. Other studies have incorporated chlorhexidine (CHX) particles into dental composites. However, CHX has not been incorporated in calcium phosphate and fluoride composites. The objectives of this study were to develop nanocomposites containing amorphous calcium phosphate (ACP) or calcium fluoride (CaF2) nanoparticles and CHX particles, and investigate Streptococcus mutans biofilm formation and lactic acid production for the first time. Methods: Chlorhexidine was frozen via liquid nitrogen and ground to obtain a particle size of 0.62μm. Four nanocomposites were fabricated with fillers of: nano ACP; nano ACP+10% CHX; nano CaF2; nano CaF2 +10% CHX. Three commercial materials were tested as controls: a resin-modified glass ionomer, and two composites. S. mutans live/dead assay, colony-forming unit (CFU) counts, biofilm metabolic activity, and lactic acid were measured. Results: Adding CHX fillers to ACP and CaF2 nanocomposites greatly increased their antimicrobial capability. ACP and CaF2 nanocomposites with CHX that were inoculated with S. mutans had a growth medium pH>6.5 after 3 d, while the control commercial composites had a cariogenic pH of 4.2. Nanocomposites with CHX reduced the biofilm metabolic activity by 10–20 folds and reduced the acid production, compared to the controls. CFU on nanocomposites with CHX were three orders of magnitude less than that on commercial composite. Mechanical properties of nanocomposites with CHX matched a commercial composite without fluoride. Significance: The novel calcium phosphate and fluoride nanocomposites could be rendered antibacterial with CHX to greatly reduce biofilm formation, acid production, CFU and metabolic activity. The antimicrobial and remineralizing nanocomposites with good mechanical properties may be promising for a wide range of tooth restorations with anti-caries capabilities. [Copyright &y& Elsevier]

Abstract: Objectives: Calcium and phosphate ion-releasing resin composites are promising for remineralization. However, there has been no report on incorporating antibacterial agents to these composites. The objective of this study was to develop antibacterial and mechanically strong nanocomposites incorporating a quaternary ammonium dimethacrylate (QADM), nanoparticles of silver (NAg), and nanoparticles of amorphous calcium phosphate (NACP). Methods: The QADM, bis(2-methacryloyloxyethyl) dimethylammonium bromide (ionic dimethacrylate-1), was synthesized from 2-(N,N-dimethylamino)ethyl methacrylate and 2-bromoethyl methacrylate. NAg was synthesized by dissolving Ag 2-ethylhexanoate salt in 2-(tert-butylamino)ethyl methacrylate. Mechanical properties were measured in three-point flexure with bars of 2mm×2mm×25mm (n =6). Composite disks (diameter=9mm, thickness=2mm) were inoculated with Streptococcus mutans. The metabolic activity and lactic acid production of biofilms were measured (n =6). Two commercial composites were used as controls. Results: Flexural strength and elastic modulus of NACP+QADM, NACP+NAg, and NACP+QADM+NAg matched those of commercial composites with no antibacterial property (p >0.1). The NACP+QADM+NAg composite decreased the titer counts of adherent S. mutans biofilms by an order of magnitude, compared to the commercial composites (p <0.05). The metabolic activity and lactic acid production of biofilms on NACP+QADM+NAg composite were much less than those on commercial composites (p <0.05). Combining QADM and NAg rendered the nanocomposite more strongly antibacterial than either agent alone (p <0.05). Significance: QADM and NAg were incorporated into calcium phosphate composite for the first time. NACP+QADM+NAg was strongly antibacterial and greatly reduced the titer counts, metabolic activity, and acid production of S. mutans biofilms, while possessing mechanical properties similar to commercial composites. These nanocomposites are promising to have the double benefits of remineralization and antibacterial capabilities to inhibit dental caries. [Copyright &y& Elsevier]

Abstract: The need for bone repair has increased as the population ages. Stem cell-scaffold approaches hold immense promise for bone tissue engineering. However, currently, preformed scaffolds for cell delivery have drawbacks including the difficulty to seed cells deep into the scaffold, and inability for injection in minimally-invasive surgeries. Current injectable polymeric carriers and hydrogels are too weak for load-bearing orthopedic applications. The objective of this study was to develop an injectable and mechanically-strong stem cell construct for bone tissue engineering. Calcium phosphate cement (CPC) paste was combined with hydrogel microbeads encapsulating human umbilical cord mesenchymal stem cells (hUCMSCs). The hUCMSC-encapsulating composite paste was fully injectable under small injection forces. Cell viability after injection matched that in hydrogel without CPC and without injection. Mechanical properties of the construct matched the reported values of cancellous bone, and were much higher than previous injectable polymeric and hydrogel carriers. hUCMSCs in the injectable constructs osteodifferentiated, yielding high alkaline phosphatase, osteocalcin, collagen type I, and osterix gene expressions at 7 d, which were 50–70 fold higher than those at 1 d. Mineralization by the hUCMSCs at 14 d was 100-fold that at 1 d. In conclusion, a fully injectable, mechanically-strong, stem cell–CPC scaffold construct was developed. The encapsulated hUCMSCs remained viable, osteodifferentiated, and synthesized bone minerals. The new injectable stem cell construct with load-bearing capability may enhance bone regeneration in minimally-invasive and other orthopedic surgeries. [Copyright &y& Elsevier]

Abstract: Human bone marrow mesenchymal stem cells (hBMSCs) require an invasive procedure to harvest, and have lower self-renewal potential with aging. Umbilical cord mesenchymal stem cells (hUCMSCs) are a relatively new stem cell source; this study reveals a self-setting and load-bearing calcium phosphate construct that encapsulates these stem cells. The flexural strength (mean±sd; n =5) of the hUCMSC-encapsulating calcium phosphate cement (CPC) increased from (3.5±1.1) MPa without polyglactin fibers, to (11.7±2.1) MPa with 20% of polyglactin fibers (p <0.05). hUCMSCs attached to the bone mineral-mimicking scaffold in the osteogenic media and differentiated down the osteogenic lineage, yielding elevated alkaline phosphatase (ALP) and osteocalcin (OC) gene expressions. ALP and OC on the CPC-fiber scaffold was 2-fold those on CPC control without fibers. hUCMSCs encapsulated inside the scaffolds retained excellent viability and cell density. The encapsulated hUCMSCs inside four different constructs successfully differentiated down the osteogenic lineage and synthesized bone minerals, as confirmed by mineral staining, SEM, and XRD. The percentage of mineral area synthesized by the encapsulated hUCMSCs increased from about 3% at day-7, to 12% at day-21 (p <0.05). In conclusion, this study demonstrated that hUCMSCs encapsulated in the bioengineered scaffolds osteo-differentiated and synthesized bone minerals. The self-setting CPC–chitosan–fiber scaffold supported the viability and osteogenic differentiation of the encapsulated hUCMSCs, and had mechanical strength matching that of cancellous bone. [Copyright &y& Elsevier]

Abstract: Objectives: Secondary caries and restoration fracture are the two main challenges facing tooth cavity restorations. The objective of this study was to develop a composite using tetracalcium phosphate (TTCP) fillers and whiskers to be stress-bearing, and to be “smart” to increase the calcium (Ca) and phosphate (PO4) ion release at cariogenic pH. Methods: TTCP was ball-milled to obtain four different particle sizes: 16.2, 2.4, 1.3, and 0.97μm. Whiskers fused with nano-sized silica were combined with TTCP as fillers in a resin. Filler level mass fractions varied from 0 to 75%. Ca and PO4 ion releases were measured vs. time at pH of 7.4, 6, and 4. Composite mechanical properties were measured via three-point flexure before and after immersion in solutions at the three pH. Results: TTCP composite without whiskers had flexural strength similar to a resin-modified glass ionomer (Vitremer) and previous Ca–PO4 composites. With whiskers, the TTCP composite had a flexural strength (mean±S.D.; n =5) of (116±9)MPa, similar to (112±14)MPa of a stress-bearing, non-releasing hybrid composite (TPH) (p >0.1). The Ca release was (1.22±0.16)mmol/L at pH of 4, higher than (0.54±0.09) at pH of 6, and (0.22±0.06) at pH of 7.4 (p <0.05). PO4 release was also dramatically increased at acidic pH. After immersion, the TTCP–whisker composite matched the strength of TPH at all three pH (p >0.1); both TTCP–whisker composite and TPH had strengths about threefold that of a releasing control. Significance: The new TTCP–whisker composite was “smart” and increased the Ca and PO4 release dramatically when the pH was reduced from neutral to a cariogenic pH of 4, when these ions are most needed to inhibit caries. Its strength was two- to threefold higher than previously known Ca–PO4 composites and resin-modified glass ionomer. This composite may have the potential to provide the necessary combination of load-bearing and caries-inhibiting capabilities. [Copyright &y& Elsevier]

Abstract: Objectives: Seven million people suffer bone fractures each year in the U.S., and musculoskeletal conditions cost $215billion/year. The objectives of this study were to develop moldable/injectable, mechanically strong and in situ-hardening calcium phosphate cement (CPC) composite scaffolds for bone regeneration and delivery of osteogenic cells and growth factors. Methods: Tetracalcium phosphate [TTCP: Ca4(PO4)2O] and dicalcium phosphate (DCPA: CaHPO4) were used to fabricate self-setting calcium phosphate cement. Strong and macroporous scaffolds were developed via absorbable fibers, biopolymer chitosan, and mannitol porogen. Following established protocols, MC3T3-E1 osteoblast-like cells (Riken, Hirosaka, Japan) were cultured on the specimens and inside the CPC composite paste carrier. Results: The scaffold strength was more than doubled via reinforcement (p <0.05). Relationships and predictive models were established between matrix properties, fibers, porosity, and overall composite properties. The cement injectability was increased from about 60% to nearly 100%. Cell attachment and proliferation on the new composite matched those of biocompatible controls. Cells were able to infiltrate into the macropores and anchor to the bone mineral-like nano-apatite crystals. For cell delivery, alginate hydrogel beads protected cells during cement mixing and setting, yielding cell viability measured via the Wst-1 assay that matched the control without CPC (p >0.1). For growth factor delivery, CPC powder:liquid ratio and chitosan content provided the means to tailor the rate of protein release from CPC carrier. Significance: New CPC scaffolds were developed that were strong, tough, macroporous and osteoconductive. They showed promise for injection in minimally invasive surgeries, and in delivering osteogenic cells and osteoinductive growth factors to promote bone regeneration. Potential applications include various dental, craniofacial, and orthopedic reconstructions. [Copyright &y& Elsevier]

Abstract: Objectives: Nanoparticles of dicalcium phosphate anhydrous (DCPA) were synthesized in our laboratory for the first time and incorporated into a dental resin. Our goal was to develop a mechanically strong dental composite that has Ca and PO4 ion release to combat tooth caries, and to investigate the effects of whisker reinforcement, DCPA particle size and silanization. Methods: DCPA nanoparticles and two larger DCPA particles were used with nano-silica-fused whiskers as fillers in a resin matrix. Composite mechanical properties were measured via three-point flexure, and the release of Ca and PO4 ions were measured versus time. Results: Using DCPA nanoparticles with a diameter of 112nm, the composite at a DCPA:whisker mass ratio of 1:1 had a flexural strength (mean±S.D.; n =5) of (112±17)MPa, not significantly different from (112±14)MPa of a commercial non-releasing composite; both were higher than (29±7)MPa for the composite at DCPA:whisker of 1:0 (p <0.05). The composite with DCPA particle size of 112nm released Ca to a concentration of 0.85mmol/L and PO4 of 3.48mmol/L, higher than Ca of 0.67mmol/L and PO4 of 1.11mmol/L using DCPA with 12μm particle size (p <0.05). Silanization of DCPA increased the composite strength at DCPA:whisker of 1:0 compared to that without silanization, but decreased the Ca and PO4 release (p <0.05). Increasing the DCPA particle surface area increased the Ca and PO4 release. Significance: Decreasing the DCPA particle size increased the Ca and PO4 release; whisker reinforcement increased the composite strength by two- to three-fold. The nano DCPA–whisker composites, with high strength and Ca and PO4 release, may provide the needed, unique combination of stress-bearing and caries-inhibiting capabilities. [Copyright &y& Elsevier]

Abstract: Calcium phosphate cement (CPC) can be molded and self-hardens in vivo to form resorbable hydroxyapatite with excellent osteoconductivity. The objective of this study was to develop an injectable, macroporous and strong CPC, and to investigate the effects of porogen and absorbable fibers. Water-soluble mannitol was used as porogen and mixed with CPC at mass fractions from 0% to 50%. CPC with 0–40% mannitol was fully extruded under a syringe force of 10 n. The paste with 50% mannitol required a 100-N force which extruded only 66% of the paste. At fiber volume fraction of 0–5%, the paste was completely extruded. However, at 6% and 7.5% fibers, some fibers were left in the syringe after the paste was extruded. The injectable CPC scaffold had a flexural strength (mean±sd; ) of (3.2±1.0) MPa, which approached the reported strengths for sintered porous hydroxyapatite implants and cancellous bone. In summary, the injectability of a ceramic scaffold, a macroporous CPC, was studies for the first time. Processing parameters were tailored to achieve high injectability, macroporosity, and strength. The injectable and strong CPC scaffold may be useful in surgical sites that are not freely accessible by open surgery or when using minimally invasive techniques. [Copyright &y& Elsevier]

This study presented a well-characterized biocompatibility profile of dental bonding agents in a mouse macrophage in vitro model. The cellular response to four different formulations of dental bonding resins and the cell viability was determined. Materials were prepared by photopolymerization and the unreacted monomers were extracted in a buffered medium. Murine macrophages were incubated in the extract medium for 24 h. Cellular viability was assessed by fluorescence microscopy and Wst-1 assay, while flow cytometry was used to quantify the apoptotic response. As an indicator of inflammatory responses, real-time polymerase chain reaction was utilized to quantify elevated cytokine production. These responses were monitored by quantifying the levels of tumor necrosis factor alpha (TNFα) and interleukin-1β (IL-1β) produced by the cells. Murine macrophage cells exposed to the unfilled resin systems containing glycidyl ether of bisphenol A (Bis-GMA) and 2-hydroxyethyl methacrylate (HEMA) had the most adverse response and cells exposed to the filled Bis-GMA and HEMA resin system were the most viable at photopolymerization times. Other resin systems displayed intermediate levels of viability when compared with the untreated control. The levels of IL-1β were significantly elevated in all samples. [ABSTRACT FROM AUTHOR]

Implant-related infections from the adhesion and proliferation of dental plaque are a major challenge for dental implants. The objectives of this study were to: (1) develop novel antibacterial titanium (Ti) healing abutment; (2) investigate the inhibition of implant infection-related pathogenic bacteria and saliva-derived biofilm, and evaluate the biocompatibility of the new material for the first time. Dimethylaminohexadecyl methacrylate (DMAHDM) and hydroxyapatite (HAP) were polymerized via polydopamine (PDA) on Ti. Staphylococcus aureus (S. aureus), Streptococcus sanguinis (S. sanguinis) and human saliva-derived biofilms were tested. After 4 weeks of DMAHDM release, the antibacterial efficacy of the DMAHDM remaining on Ti surface and the DMADHM in medium was tested. Biocompatibility was determined using human gingival fibroblasts (HGFs) and periodontal ligament stem cells (PDLSCs). The DMAHDM-loaded coating filled into the nano-voids in Ti surfaces. The modified Ti showed potent antibacterial activity, reducing the CFU of S. aureus , S. sanguinis and saliva-derived biofilms by 8, 7 and 4 log, respectively (P < 0.05). After 4 weeks of release, the modified Ti was still able to reduce S. aureus and S. sanguinis biofilm CFU by 1–3 log (P < 0.05). This provided strong antibacterial function for more than 4 weeks, which were the high-risk period for implant infections. The new material showed excellent biocompatibility when compared to control (P > 0.05). Novel DMAHDM-loaded Ti healing abutment had strong antibacterial effects, reducing biofilm CFUs by orders of magnitude, and lasting for over four weeks to cover the high-risk period for implant infections. The novel antibacterial Ti is promising to combat implant-related infections in dental, craniofacial and orthopedic applications. • The DMAHDM-loaded Ti effectively inhibit biofilms on the surface in the high-risk period of peri-implant inflammation. • The released DMAHDM inhibited the surrounding planktonic S. aureus and S. sanguinis. • After 4 weeks, the modified Ti was still able to show antibacterial effects on S. aureus and S. sanguinis biofilm. • The DMAHDM-loaded Ti is biocompatible, with no cytotoxicity to soft tissue seal and osseointegration related cells. [ABSTRACT FROM AUTHOR]

Dental caries is caused by acids from biofilms. pH-sensitive nanoparticle carriers could achieve improved targeted effectiveness. The objectives of this study were to develop novel mesoporous silica nanoparticles carrying nanosilver and chlorhexidine (nMS-nAg-Chx), and investigate the inhibition of biofilms as well as the modulation of biofilm to suppress acidogenic and promote benign species for the first time. nMS-nAg was synthesized via a modified sol-gel method. Carboxylate group functionalized nMS-nAg (COOH-nMS-nAg) was prepared and Chx was added via electrostatic interaction. Minimal inhibitory concentration (MIC), inhibition zone, and growth curves were evaluated. Streptococcus mutans (S. mutans), Streptococcus gordonii (S. gordonii), and Streptococcus sanguinis (S. sanguinis) formed multispecies biofilms. Metabolic activity, biofilm lactic acid, exopolysaccharides (EPS), and TaqMan real-time polymerase chain reaction (RT-PCR) were tested. Biofilm structures and biomass were observed by scanning electron microscopy (SEM) and live/dead bacteria staining. nMS-nAg-Chx possessed pH-responsive properties, where Chx release increased at lower pH. nMS-nAg-Chx showed good biocompatibility. nMS-nAg-Chx exhibited a strong antibacterial function, reducing biofilm metabolic activity and lactic acid as compared to control (p < 0.05, n = 6). Moreso, biofilm biomass was dramatically suppressed in nMS-nAg-Chx groups. In control group, there was an increasing trend of S. mutans proportion in the multispecies biofilm, with S. mutans reaching 89.1% at 72 h. In sharp contrast, in nMS-nAg-Chx group of 25 μg/mL, the ratio of S. mutans dropped to 43.7% and the proportion of S. gordonii and S. sanguinis increased from 19.8% and 10.9 to 69.8% and 56.3%, correspondingly. pH-sensitive nMS-nAg-Chx had potent antibacterial effects and modulated biofilm toward a non-cariogenic tendency, decreasing the cariogenic species nearly halved and increasing the benign species approximately twofold. nMS-nAg-Chx is promising for applications in mouth rinse and endodontic irrigants, and as fillers in resins to prevent caries. [Display omitted] [ABSTRACT FROM AUTHOR]

Cariogenic oral biofilms cause recurrent dental caries around composite restorations, resulting in unprosperous oral health and expensive restorative treatment. Quaternary ammonium monomers that can be copolymerized with dental resin systems have been explored for the modulation of dental plaque biofilm growth over dental composite surfaces. Here, for the first time, we investigated the effect of bis(2-methacryloyloxyethyl) dimethylammonium bromide (QADM) on human overlying mature oral biofilms grown intra-orally in human participants for 7–14 days. Seventeen volunteers wore palatal devices containing composite specimens containing 10% by mass of QADM or a control composite without QADM. After 7 and 14 days, the adherent biofilms were collected to determine bacterial counts via colony-forming unit (CFU) counts. Biofilm viability, chronological changes, and percentage coverage were also determined through live/dead staining. QADM composites caused a significant inhibition of Streptococcus mutans biofilm formation for up to seven days. No difference in the CFU values were found for the 14-day period. Our findings suggest that: (1) QADM composites were successful in inhibiting 1–3-day biofilms in the oral environment in vivo; (2) QADM significantly reduced the portion of the S. mutans group; and (3) stronger antibiofilm activity is required for the control of mature long-term cariogenic biofilms. Contact-killing strategies using dental materials aimed at preventing or at least reducing high numbers of cariogenic bacteria seem to be a promising approach in patients at high risk of the recurrence of dental caries around composites. [ABSTRACT FROM AUTHOR]

Antimicrobial photodynamic therapy (aPDT) shows promise in eliminating oral pathogens without inducing microbial resistance. Yet, it faces limited biofilm penetration by the photosensitizer, which hinders its efficacy against mature, thick biofilms. This study assesses the effectiveness of the MagTBO (magnetic nanoparticles and toluidine‐blue ortho) nanoplatform against mature Streptococcus mutans biofilms associated with dental caries. The study employs constant‐depth film fermenter (CDFF) models, known as "artificial mouth," to replicate caries processes and allow biofilm growth over teeth. This method enables the evaluation of biofilm‐induced mineral loss under cariogenic challenge over 5 and 10 days. The study shows that MagTBO improves aPDT's effectiveness against highly mature and complex biofilms over 5 and 10 days. However, the biofilm reduction unaffected the mineral content in the underlying dentin. This presents a promising approach for clinical aPDT protocols. However, it is crucial to acknowledge that these findings are based on in vitro studies and may necessitate further clinical confirmation. In summary, our data indicate that magnetic‐based photosensitizers enhance the modulation of pathogenic oral biofilms by aPDT, offering potential advancements in clinical aPDT protocols. [ABSTRACT FROM AUTHOR]

Pit and fissure sealants with antibacterial and remineralization properties have broad application prospects in caries prevention. The objectives of this study were to: (1) develop a novel pit and fissure sealant containing CaF 2 nanoparticles (nCaF 2) and dimethylaminohexadecyl methacrylate (DMAHDM); and (2) investigate the effects of nCaF 2 and DMAHDM on biofilm response and fluoride (F) ion release for the first time. Helioseal F was used as a control. Bioactive sealants were formulated with DMAHDM and nCaF 2. Flow properties, enamel shear bond strength, hardness and F ion releases were measured. Streptococcus mutans (S. mutans) biofilms were grown on sealants. Biofilm metabolic activity, lactic acid production, colony-forming units (CFU), and pH of biofilm culture medium were measured. Adding 5% DMAHDM and 20% nCaF 2 did not reduce the paste flow and enamel bond strength, compared to control (p < 0.05). Hardness of sealants with 20% nCaF 2 and DMAHDM was higher than control (p < 0.05). The F ion release from 20% nCaF 2 was much higher than that of commercial control (p < 0.05). The sealant with DMAHDM reduced the S. mutans biofilm CFU by 4 logs. The pH in biofilm medium of the new bioactive sealant was much higher (pH 6.8) than that of commercial sealant (pH 4.66) (p < 0.05). The new bioactive pit and fissure sealant with nCaF 2 and DMAHDM achieved high fluoride release and strong antibacterial performance. This novel fluoride-releasing and antibacterial sealant is promising to inhibit caries and promote the remineralizaton of enamel and dentin. [ABSTRACT FROM AUTHOR]

Dental plaque build-up on the cervical area adjacent to gingival margins is a trigger factor for secondary caries around restored root caries lesions. Dimethylaminohexadecyl methacrylate (DMAHDM) and amorphous calcium phosphate nanoparticles (NACP) impart anti-caries effect by reducing the bacterial growth and releasing high concentrations of calcium and phosphate ions, respectively. The present study explored the optimization and formulation of dental composite with increased concentration of DMAHDM combined with NACP and its effect on mechanical behavior and antibacterial response. DMAHDM was incorporated into dental composite formulation at 3% and 5% with 20% NACP fillers. Mechanical properties were assessed by flexural strength and elastic modulus. The cationic charge density of the samples was determined using fluorescein staining assay. A human saliva-derived microcosm biofilm model was used to assess antibacterial response via colony-forming units, metabolic activities, lactic acid production, and live/dead assay. Surface roughness was measured after 48 h-biofilm formation. The viability of human saliva microcosm biofilms was DMAHDM concentration-dependent, where all the microbiological assays were substantially reduced in the presence of 5%DMAHDM. The increased DMAHDM concentration mirrors an increased surface charge density of composites by 8–12 folds and reduced the growth of cariogenic species by 2–5 log (p ≤ 0.05). Metabolic activity and lactic acid were reduced by 70–90% and 48–99%, respectively. Increasing DMAHDM concentration up to 5% and its association with NACP fillers did not adversely affect the mechanical properties. A highly potent antibiofilm bioactive composite for root caries restorations having DMAHDM-NACP could be flexibly tailored during formulation without detrimental outcome for mechanical function. The enhanced antibacterial performance of the novel bioactive composite has great potential to suppress the dental plaque build-up that triggers secondary caries around the restored root caries lesions. [ABSTRACT FROM AUTHOR]

• S. mutans rnc gene-deletion reduced the biofilm growth and acid production in antibacterial monomer. • DMAHDM was shown to have a stronger antibacterial function than CHX. • The dual strategy of combining rnc -deletion with DMAHDM achieved the greatest reduction in biofilms. • The novel dual strategy is promising for a wide range of dental applications. Antibacterial quaternary ammonium monomers (QAMs) are used in resins. The rnc gene in Streptococcus mutans (S. mutans) plays a key role in resisting antibiotics. The objectives of this study were to investigate for the first time: (1) the effects of rnc deletion on S. mutans biofilms and acid production; (2) the combined effects of rnc deletion with dimethylaminohexadecyl methacrylate (DMAHDM) on biofilm-inhibition efficacy. Parent S. mutans strain UA159 (ATCC 700610) and the rnc -deleted S. mutans were used. Bacterial growth, minimum inhibitory concentration (MIC), and minimal bactericidal concentration (MBC) were measured to analyze the bacterial susceptibility of the parent and rnc -deleted S. mutans against DMAHDM, with the gold-standard chlorhexidine (CHX) as control. Biofilm biomass, polysaccharide and lactic acid production were measured. The drug-susceptibility of the rnc -deleted S. mutans to DMAHDM or CHX was 2-fold higher than parent S. mutans. The drug-susceptibility did not increase after 10 passages (p < 0.05). Deleting the rnc gene increased the biofilm susceptibility to DMAHDM or CHX by 2-fold. The rnc -deletion in S. mutans reduced biofilm biomass, polysaccharide and lactic acid production, even at no drugs. DMAHDM was nearly 40 % more potent than the gold-standard CHX. The combination of rnc deletion + DMAHDM treatment achieved the greatest reduction in biofilm biomass, polysaccharide synthesis, and lactic acid production. Gene modification by deleting the rnc in S. mutans reduced the biofilm growth and acid production, and the rnc deletion + DMAHDM method showed the greatest biofilm-inhibition efficacy, for the first time. The dual strategy of antibacterial monomer + bacterial gene modification shows great potential to control biofilms and inhibit caries. [ABSTRACT FROM AUTHOR]

Recurrent caries remain a persistent concern, often linked to microleakage and a lack of bioactivity in contemporary dental composites. Our study aims to address this issue by developing a low-shrinkage-stress nanocomposite with antibiofilm and remineralization capabilities, thus countering the progression of recurrent caries. In the present study, we formulated low-shrinkage-stress nanocomposites by combining triethylene glycol divinylbenzyl ether and urethane dimethacrylate, incorporating dimethylaminododecyl methacrylate (DMADDM), along with nanoparticles of calcium fluoride (nCaF2) and nanoparticles of amorphous calcium phosphate (NACP). The biofilm viability, biofilm metabolic activity, lactic acid production, and ion release were evaluated. The novel formulations containing 3% DMADDM exhibited a potent antibiofilm activity, exhibiting a 4-log reduction in the human salivary biofilm CFUs compared to controls (p < 0.001). Additionally, significant reductions were observed in biofilm biomass and lactic acid (p < 0.05). By integrating both 10% NACP and 10% nCaF2 into one formulation, efficient ion release was achieved, yielding concentrations of 3.02 ± 0.21 mmol/L for Ca, 0.5 ± 0.05 mmol/L for P, and 0.37 ± 0.01 mmol/L for F ions. The innovative mixture of DMADDM, NACP, and nCaF2 displayed strong antibiofilm effects on salivary biofilm while concomitantly releasing a significant amount of remineralizing ions. This nanocomposite is a promising dental material with antibiofilm and remineralization capacities, with the potential to reduce polymerization-related microleakage and recurrent caries. [ABSTRACT FROM AUTHOR]

Injectable and self-setting calcium phosphate cement scaffold (CPC) capable of encapsulating and delivering stem cells and bioactive agents would be highly beneficial for dental and craniofacial repairs. The objectives of this study were to: (1) develop a novel injectable CPC scaffold encapsulating human periodontal ligament stem cells (hPDLSCs) and metformin (Met) for bone engineering; (2) test bone regeneration efficacy in vitro and in vivo. hPDLSCs were encapsulated in degradable alginate fibers, which were then mixed into CPC paste. Five groups were tested: (1) CPC control; (2) CPC + hPDLSC-fibers + 0% Met (CPC + hPDLSCs + 0%Met); (3) CPC + hPDLSC-fibers + 0.1% Met (CPC + hPDLSCs + 0.1%Met); (4) CPC + hPDLSC-fibers + 0.2% Met (CPC + hPDLSCs + 0.2%Met); (5) CPC + hPDLSC-fibers + 0.4% Met (CPC + hPDLSCs + 0.4%Met). The injectability, mechanical properties, metformin release, and hPDLSC osteogenic differentiation and bone mineral were determined in vitro. A rat cranial defect model was used to evaluate new bone formation. The novel construct had good injectability and physical properties. Alginate fibers degraded in 7 days and released hPDLSCs, with 5-fold increase of proliferation (p＜0.05). The ALP activity and mineral synthesis of hPDLSCs were increased by Met delivery (p＜0.05). Among all groups, CPC+hPDLSCs+ 0.1%Met showed the greatest cell mineralization and osteogenesis, which were 1.5–10 folds those without Met (p＜0.05). Compared to CPC control, CPC+hPDLSCs+ 0.1%Met enhanced bone regeneration in rats by 9 folds, and increased vascularization by 3 folds (p＜0.05). The novel injectable construct with hPDLSC and Met encapsulation demonstrated excellent efficacy for bone regeneration and vascularization in vivo in an animal model. CPC+hPDLSCs+ 0.1%Met is highly promising for dental and craniofacial applications. • We developed a novel injectable and mechanically strong CPC-alginate hydrogel-hPDLSC scaffold with different dosages of metformin for bone tissue engineering. • The novel construct had much greater bone regeneration and vascularization potency than control in vitro and in vivo. [ABSTRACT FROM AUTHOR]

Objectives: Composites are commonly used for tooth restorations, but recurrent caries often lead to restoration failures due to polymerization shrinkage-stress-induced marginal leakage. The aims of this research were to: (1) develop novel low-shrinkage-stress (L.S.S.) nanocomposites containing dimethylaminododecyl methacrylate (DMADDM) with nanoparticles of calcium fluoride (nCaF2) or amorphous calcium phosphate (NACP) for remineralization; (2) investigate antibacterial and cytocompatibility properties. Methods: Nanocomposites were made by mixing triethylene glycol divinylbenzyl ether with urethane dimethacrylate containing 3% DMADDM, 20% nCaF2, and 20% NACP. Flexural strength, elastic modulus, antibacterial properties against Streptococcus mutans biofilms, and cytotoxicity against human gingival fibroblasts and dental pulp stem cells were tested. Results: Nanocomposites with DMADDM and nCaF2 or NACP had flexural strengths matching commercial composite control without bioactivity. The new nanocomposite provided potent antibacterial properties, reducing biofilm CFU by 6 logs, and reducing lactic acid synthesis and metabolic function of biofilms by 90%, compared to controls (p < 0.05). The new nanocomposites produced excellent cell viability matching commercial control (p > 0.05). Conclusions: Bioactive L.S.S. antibacterial nanocomposites with nCaF2 and NACP had excellent bioactivity without compromising mechanical and cytocompatible properties. The new nanocomposites are promising for a wide range of dental restorations by improving marginal integrity by reducing shrinkage stress, defending tooth structures, and minimizing cariogenic biofilms. [ABSTRACT FROM AUTHOR]

White spot lesions (WSL) due to enamel demineralization are major complications for orthodontic treatments. Calcium phosphate (CaP) dental resins with Ca and P ion releases are promising for remineralization. However, previous Ca and P releases lasted for only weeks. Experimental orthodontic cements were developed using pyromellitic glycerol dimethacrylate (PMGDM) and ethoxylated bisphenol A dimethacrylate (EBPADMA) at mass ratio of 1:1 (PE); and PE plus 10% of 2-hydroxyethyl methacrylate (HEMA) and 5% of bisphenol A glycidyl dimethacrylate (BisGMA) (PEHB). Particles of amorphous calcium phosphate (ACP) were incorporated into PE and PEHB at 40% filler level. Specimens were tested for bracket-enamel shear bond strength, water sorption, CaP release, and ion recharge and re-release. PEHB+40ACP had higher bracket-enamel bond strength and ion release and rechargeability than PE+40ACP. ACP incorporation into the novel orthodontic cement did not adversely affect the bracket-enamel bond strength. Ion release and re-release from the novel ACP orthodontic cement indicated favorable release and re-release patterns. The recharged orthodontic cement could release CaP ions continuously for four weeks without further recharge. Novel rechargeable orthodontic cement containing ACP was developed with a high bracket-enamel bond strength and the ability to be repeatedly recharged to maintain long-term high levels of CaP ion releases. [ABSTRACT FROM AUTHOR]

Long-term heavy alcohol consumption could result in a range of health, social, and behavioral problems. People who abuse alcohol are at high risks of seriously having osteopenia, periodontal disease, and compromised oral health. However, the role of ethanol (EtOH) in the biological functions of human dental pulp cells (DPCs) is unknown. Whether EtOH affects the odontoblastic differentiation of DPCs through the mechanistic target of rapamycin (mTOR) remains unexplored. The objective of this study was to investigate the effects of EtOH on DPC differentiation and mineralization. DPCs were isolated and purified from human dental pulps. The proliferation and odontoblastic differentiation of DPCs treated with EtOH were subsequently investigated. Different doses of EtOH were shown to be cytocompatible with DPCs. EtOH significantly activated the mTOR pathway in a dose-dependent manner. In addition, EtOH downregulated the alkaline phosphatase activity, attenuated the mineralized nodule formation, and suppressed the expression of odontoblastic markers including ALP, DSPP, DMP-1, Runx2, and OCN. Moreover, the pretreatment with rapamycin, a specific mTOR inhibitor, markedly reversed the EtOH-induced odontoblastic differentiation and cell mineralization. Our findings show for the first time that EtOH can suppress DPC differentiation and mineralization in a mTOR-dependent manner, indicating that EtOH may be involved in negatively regulating the dental pulp repair. [ABSTRACT FROM AUTHOR]

Objectives: Calcium phosphate cement (CPC) is promising for dental and craniofacial applications due to its ability to be injected or filled into complex-shaped bone defects and molded for esthetics, and its resorbability and replacement by new bone. The objective of this study was to investigate bone regeneration via novel macroporous CPC containing absorbable fibers, hydrogel microbeads and growth factors in critical-sized cranial defects in rats. Methods: Mannitol porogen and alginate hydrogel microbeads were incorporated into CPC. Absorbable fibers were used to provide mechanical reinforcement to CPC scaffolds. Six CPC groups were tested in rats: (1) control CPC without macropores and microbeads; (2) macroporous CPC+large fiber; (3) macroporous CPC+large fiber+nanofiber; (4) same as (3), but with rhBMP2 in CPC matrix; (5) same as (3), but with rhBMP2 in CPC matrix+rhTGF-β1 in microbeads; (6) same as (3), but with rhBMP2 in CPC matrix+VEGF in microbeads. Rats were sacrificed at 4 and 24 weeks for histological and micro-CT analyses. Results: The macroporous CPC scaffolds containing porogen, absorbable fibers and hydrogel microbeads had mechanical properties similar to cancellous bone. At 4 weeks, the new bone area fraction (mean±sd; n =5) in CPC control group was the lowest at (14.8±3.3)%, and that of group 6 (rhBMP2+VEGF) was (31.0±13.8)% (p <0.05). At 24 weeks, group 4 (rhBMP2) had the most new bone of (38.8±15.6)%, higher than (12.7±5.3)% of CPC control (p <0.05). Micro-CT revealed nearly complete bridging of the critical-sized defects with new bone for several macroporous CPC groups, compared to much less new bone formation for CPC control. Significance: Macroporous CPC scaffolds containing porogen, fibers and microbeads with growth factors were investigated in rat cranial defects for the first time. Macroporous CPCs had new bone up to 2-fold that of traditional CPC control at 4 weeks, and 3-fold that of traditional CPC at 24 weeks, and hence may be useful for dental, craniofacial and orthopedic applications. [ABSTRACT FROM AUTHOR]

Objective Patients with dry mouth often have an acidic oral environment lacking saliva that provides calcium (Ca) and phosphate (P) ions. However, there has been no study on dentin remineralization by placing samples in an acidic solution without Ca and P ions. Previous studies used saliva-like solutions with neutral pH and Ca and P ions. Therefore, the objective of this study was to investigate a novel method of combining poly(amido amine) (PAMAM) with a composite of nanoparticles of amorphous calcium phosphate (NACP) on dentin remineralization in an acidic solution without Ca and P ions for the first time. Methods Demineralized dentin specimens were tested into four groups: (1) dentin control, (2) dentin coated with PAMAM, (3) dentin with NACP nanocomposite, (4) dentin with PAMAM plus NACP composite. Specimens were treated with lactic acid at pH 4 without initial Ca and P ions for 21 days. Acid neutralization and Ca and P ion concentrations were measured. Dentin specimens were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and hardness testing vs. remineralization efficacy. Results NACP composite had mechanical properties similar to commercial control composites (p > 0.1). NACP composite neutralized acid and released Ca and P ions. PAMAM alone failed to induce dentin remineralization. NACP alone achieved mild remineralization and slightly increased dentin hardness at 21 days (p > 0.1). In contrast, the PAMAM + NACP nanocomposite method in acid solution without initial Ca and P ions greatly remineralized the pre-demineralized dentin, restoring its hardness to approach that of healthy dentin (p > 0.1). Significance Dentin remineralization via PAMAM + NACP in pH 4 acid without initial Ca and P ions was demonstrated for the first time, when conventional methods such as PAMAM did not work. The novel PAMAM + NACP nanocomposite method is promising to protect tooth structures, especially for patients with reduced saliva to inhibit caries. [ABSTRACT FROM AUTHOR]

Dental polymeric composites have become the first choice for cavity restorations due to their esthetics and capacity to be bonded to the tooth. However, the oral cavity is considered to be harsh environment for a polymeric material. Oral biofilms can degrade the polymeric components, thus compromising the marginal integrity and leading to the recurrence of caries. Recurrent caries around restorations has been reported as the main reason for restoration failure. The degradation of materials greatly compromises the clinical longevity. This review focuses on the degradation process of resin composites by oral biofilms, the mechanisms of degradation and its consequences. In addition, potential future developments in the area of resin-based dental biomaterials with an emphasis on anti-biofilm strategies are also reviewed. [ABSTRACT FROM AUTHOR]

Objectives. The objectives of this study were to: (1) develop a bioactive multifunctional composite (BMC) via nanoparticles of amorphous calcium phosphate (NACP), 2-methacryloyloxyethyl phosphorylcholine (MPC), dimethylaminohexadecyl methacrylate (DMAHDM) and nanoparticles of silver (NAg); and (2) investigate the effects of combined BMC + poly (amido amine) (PAMAM) on remineralization of demineralized root dentin in a cyclic artificial saliva/lactic acid environment for the first time. Methods. Root dentin specimens were prepared and demineralized with 37% phosphoric acid for 15 s. Four groups were prepared: (1) root dentin control; (2) root dentin with BMC; (3) root dentin with PAMAM; (4) root dentin with BMC + PAMAM. Specimens were treated with a cyclic artificial saliva/lactic acid regimen for 21 days. Calcium (Ca) and phosphate (P) ion concentrations and acid neutralization were determined. The remineralized root dentin specimens were examined via hardness testing and scanning electron microscopy (SEM). Results. Mechanical properties of BMC were similar to commercial control composites (p = 0.913). BMC had excellent Ca and P ion release and acid-neutralization capability. BMC or PAMAM alone each achieved slight mineral regeneration in demineralized root dentin. The combined BMC + PAMAM induced the greatest root dentin remineralization, and increased the hardness of pre-demineralized root dentin to match that of healthy root dentin (p = 0.521). Significance. The excellent root dentin remineralization effects of BMC + PAMAM were demonstrated for the first time. BMC + PAMAM induced effective and complete root dentin remineralization in an acid challenge environment. The novel BMC + PAMAM method is promising for Class V and other restorations to remineralize and protect tooth structures. [ABSTRACT FROM AUTHOR]

A long-time drawback of dental composites is that they accumulate more biofilms and plaques than amalgam and glass ionomer restorative materials. It would be highly desirable to develop a new composite with reduced biofilm growth, while avoiding the non-esthetics of amalgam and low strength of glass ionomer. The objectives of this study were to: (1) develop a protein-repellent composite with reduced biofilms matching amalgam and glass ionomer for the first time; and (2) investigate their protein adsorption, biofilms, and mechanical properties. Five materials were tested: A new composite containing 3% of protein-repellent 2-methacryloyloxyethyl phosphorylcholine (MPC); the composite with 0% MPC as control; commercial composite control; dental amalgam; resin-modified glass ionomer (RMGI). A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate metabolic activity, colony-forming units (CFU), and lactic acid production. Composite with 3% MPC had flexural strength similar to those with 0% MPC and commercial composite control (p > 0.1), and much greater than RMGI (p < 0.05). Composite with 3% MPC had protein adsorption that was only 1/10 that of control composites (p < 0.05). Composite with 3% MPC had biofilm CFU and lactic acid much lower than control composites (p < 0.05). Biofilm growth, metabolic activity and lactic acid on the new composite with 3% MPC were reduced to the low level of amalgam and RMGI (p > 0.1). In conclusion, a new protein-repellent dental resin composite reduced oral biofilm growth and acid production to the low levels of non-esthetic amalgam and RMGI for the first time. The long-held conclusion that dental composites accumulate more biofilms than amalgam and glass ionomer is no longer true. The novel composite is promising to finally overcome the major biofilm-accumulation drawback of dental composites in order to reduce biofilm acids and secondary caries. [ABSTRACT FROM AUTHOR]

Dental resin adhesives and composites are the most prevailing dental restorative materials used to treat cavitated tooth decay. These materials are challenged inside the mouth by bacterial acid attack, lack of bioactivity, and the scarcity of alternatives maintaining the mechanical properties over the lifetime service of these materials. Coreshell nanostructures are composed of various materials surrounded by a protective shell. They are acquiring considerable attention as innovative multipurpose carriers that show great potential in restorative dentistry. Herein, we systematically reviewed the recent studies on core-shell nanostructures incorporated into dental resinbased materials, their intended properties, synthesis methods, and assessment tests employed. This study used scoping review method, following Arksey and O'Malley's five stages framework using PubMed and Scopus (Elsevier) databases. From 149 initially identified manuscripts, 20 studies were eligible for full-text screening, and 15 were included for data extraction. The majority of included studies have used resin composite as parental material. Silica oxide was the most prevailing shell incorporated into dental resins. Almost all core-shell nanostructures were added to improve the material's strength and impart antibacterial properties. Designing strategies and drug release behaviors were discussed. In the end, current challenges and prospects in this promising field were highlighted. [ABSTRACT FROM AUTHOR]

Bone tissue engineering is a promising approach that uses seed-cell-scaffold drug delivery systems to reconstruct bone defects caused by trauma, tumors, or other diseases (e.g., periodontitis). Metformin, a widely used medication for type II diabetes, has the ability to enhance osteogenesis and angiogenesis by promoting cell migration and differentiation. Metformin promotes osteogenic differentiation, mineralization, and bone defect regeneration via activation of the AMP-activated kinase (AMPK) signaling pathway. Bone tissue engineering depends highly on vascular networks for adequate oxygen and nutrition supply. Metformin also enhances vascular differentiation via the AMPK/mechanistic target of the rapamycin kinase (mTOR)/NLR family pyrin domain containing the 3 (NLRP3) inflammasome signaling axis. This is the first review article on the effects of metformin on stem cells and bone tissue engineering. In this paper, we review the cutting-edge research on the effects of metformin on bone tissue engineering. This includes metformin delivery via tissue engineering scaffolds, metformin-induced enhancement of various types of stem cells, and metformin-induced promotion of osteogenesis, angiogenesis, and its regulatory pathways. In addition, the dental, craniofacial, and orthopedic applications of metformin in bone repair and regeneration are also discussed. [ABSTRACT FROM AUTHOR]