Search

To enhance the efficacy of Surface-enhanced Raman spectroscopy (SERS), noble metal nanoparticles (NMNPs) can be organized onto three-dimensional (3D) hierarchical nanostructures. This study involved constructing a 3D solid SERS substrate by layering Au-Ag core-satellite nanoparticle monolayer films (MF) on a polystyrene sphere (PS) array, termed Au-Ag core-satellite NPs-MF-PS. Optimizing the PS size was essential to maximize SERS substrate activity, with the 500 nm PS providing the best SERS enhancement factor of 1.03 × 10 7 a two-fold increase over Au-Ag core-satellite NPs MF alone. Additionally, cotinine detection was improved by using a ratio between the target molecules and internal Raman signals from the SERS substrate. Compared to conventional methods relying on the target molecule's Raman signal, this ratiometric SERS method expanded the detection range from 10 -8 - 10 -1  M to 10 -9 - 10 -1  M and reduced the detection limit from 3.67 × 10 -9  M to 1.68 × 10 -10  M. This approach represents a novel direction in creating ultra-sensitive SERS platforms with broad applications, suggesting that ratiometric SERS could further promote SERS technology advancements., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2025 Elsevier B.V. All rights reserved.)

Herein, a new two-dimensional (2D) Ce-organic frameworks (referred to as SLX-4) was achieved by traditional solvothermal conditions. Initial studies of SLX-4 toward Hantzsch reaction showed that good catalytic activity can be obtained under mild conditions, giving the desired 1,4-dihydropyridines in moderate to high yields. The catalyst could be reused at least 4 times keeping good catalytic activity. Moreover, compared to the previously reported MOFs catalysts for Hantzsch reactions, SLX-4 was stable in most acidic and basic environment, and gave comparable yield., (© 2024 Wiley-VCH GmbH.)

The precise design and synthesis of Au and Ag composite nanomaterials can provide them with richer plasmonic modes, resulting in enhanced optical properties. Here, a novel strategy was demonstrated to control the selective deposition of Ag at different positions of Au triangular nanoprisms (Au TNPs). 1,4-benzenedithiol (BDT) was selectively absorbed in different positions of Au TNPs which made Ag selectively deposited on Au TNPs. A series of Ag islands-Au TNPs including 3AgNPs islands-Au@Ag TNPs, 3AgNPs islands-Au TNPs, 2AgNPs islands-Au TNPs and 1AgNPs island-Au TNPs were obtained. We found that Surface enhanced Raman scattering (SERS) activity was closely associated with the position of Ag deposition under the same volume of AgNO 3 . It has strongest SERS activity when Ag deposit on the surface, edges and corners of Au TNPs which corresponding to 3AgNPs islands-Au@Ag TNPs with a high enhancement factor of 5.50 × 10 7 . Raman reporter molecules were embedded between Au core, Ag shell and Ag islands which enhanced the stability, making them ideal candidates for Raman tag-based applications. We used it as SERS probes to realize the ultra-sensitive detection of Cyfra21-1, with a low limit of detection of 2.84 × 10 -14 g/L and a wide linear range of 1.00 × 10 -13 -1.00 × 10 -1 g/L., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

A novel surface-enhanced Raman scattering (SERS) composite substrates on the basis of Ag triangular nanoplates(Ag TNPs)-modified SiO 2 photonic crystals (PC) is fabricated and applied to the SERS detection of malachite green (MG). It consists of uniformly arranged Ag TNP@SiO 2 , a new PC. Notably, Ag TNP are uniformly aligned on the SiO 2 surface, forming a three-dimensional high-density hotspot nanostructure. With the tip "hot spots" of Ag TNPs, Bragg diffraction of SiO 2 and coupling enhancement between Ag TNPs and SiO 2 , the SERS enhancement of this composite substrates was multiplied. The effect on the SERS of Ag TNP@SiO 2 composite substrate was systematically optimized by tuning Ag TNP size, size of SiO 2 microspheres, coverage of Ag TNPs on SiO 2 and fabrication method of Ag TNPs and PC. Moreover, the uniform of SERS composite substrates and Raman signal was dramatically increased by the method of vertical deposition. Eventually, the SERS composite substrates were employed in MG detection. Its broad detection range of 1 pM-1 μM and low limit of detection (LOD) of 0.49 pM indicated acceptable sensitivity and repeatability. This work illustrates the promising applicability in food safety analysis based on SERS composite substrates composed by Ag TNP@SiO 2 with numerous SERS enhancements and excellent stability., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Owing to the unique quantum size effect and surface effect, gold-based nanomaterials (GNMs) are promising for pathogen detection and broad-spectrum antimicrobial activity. This review summarizes recent research on GNMs as sensors for detecting pathogens and as tools for their elimination. Firstly, the need for pathogen detection is briefly introduced with an overview of the physicochemical properties of gold nanomaterials. And then strategies for the application of GNMs in pathogen detection are discussed. Colorimetric, fluorescence, surface-enhanced Raman scattering (SERS) techniques, dark-field microscopy detection and electrochemical methods can enable efficient, sensitive, and specific pathogen detection. The third section describes the antimicrobial applications of GNMs. They can be used for antimicrobial agent delivery and photothermal conversion and can act synergistically with photosensitizers to achieve the precise killing of pathogens. In addition, GNMs are promising for integrated pathogen detection and treatment; for example, combinations of colorimetric or SERS detection with photothermal sterilization have been demonstrated. Finally, future outlooks for the applications of GNMs in pathogen detection and treatment are summarized., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Morphology regulation of heterodimer nanoparticles and the use of their asymmetric features for further practical applications are crucial because of the rich optical properties and various combinations of heterodimers. This work used silicon to asymmetrically wrap half of a gold sphere and grew gold branches on the bare gold surface to form heterogeneous nano pineapples (NPPs) which can effectively improve Surface-enhanced Raman scattering (SERS) properties through chemical enhancement and lightning-rod effect respectively. The asymmetric structures of NPPs enabled them to self-assemble into the monolayer membrane with consistent branch orientation. The prepared substrate had high homogeneity and better SERS ability than disorganized substrates, and achieved reliable detection of malachite green (MG) in clams with a detection limit of 7.8 × 10 -11 M. This work provided a guide to further revise the morphology of heterodimers and a new idea for the use of asymmetric dimers for practically photochemical and biomedical sensing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Plasmonic Au-Ag nanostars are excellent surface-enhanced Raman scattering (SERS) probes due to bimetallic coupling and the tip effect. However, the existing preparation methods of AuAg nanostars cannot achieve controlled growth of the Ag layer on the branches of nanostars and so cannot display their SERS to the maximum extent, thus limiting its sensitivity in biosensing. Herein, a novel strategy "PEI (polyethylenimine)-guided Ag deposition method" is proposed for synthesizing AuAg core-shell nanostars (AuAg@Ag NS) with a tunable distribution of the Ag layer from the core to the tip, which offers an avenue for investigating the correlation between SERS efficiency and the extent of spread of the Ag layer. It is found that AuAg@Ag NS with a Ag layer coated the whole branch has the strongest SERS performance because the coupling between the tips and Ag layer is maximized. Meanwhile, as a completely closed core-shell structure, AuAg@Ag NS can confine and anchor 4-ATP inside the Ag layer to avoid an unstable SERS signal. By connecting the aptamer, a reliable internal standard nanoprobe with a SERS enhancement factor (EF) up to 1.86 × 10 8 is prepared. Okada acid is detected through competitive adsorption of this SERS probes, and the detection limit is 36.6 pM. The results gain fundamental insights into tailoring the nanoparticle morphologies and preparation of internal standard nanoprobes and also provide a promising avenue for marine toxin detection in food safety.

The development of an ultra-sensitive detection method for carbohydrate antigen 19-9 (CA19-9) is very important for the early diagnosis of pancreatic cancer. In this work, we developed a new strategy to achieve a variety of Au-Ag hybrid nanoparticles from janus to core-satellite which is controlled by the volume of AgNO 3 and the concentration of benzimidazolecarboxylic acid (MBIA). With the volume of AgNO 3 increased, Au-Ag hybrid nanoparticles changed from janus to core-satellite and the characteristic absorption peak showed two opposite trends. The size and number of Ag islands were determined by the concentration of MBIA. Au-Ag core-satellites nanoparticles with a large number of small-sized Ag have the highest SERS intensity. Then we used them as SERS nanotags and Au-Polystyrene nanospheres modified by captured anti-CA19-9 antibody as solid substrates to realize the ultra-sensitive detection of CA19-9 with a low limit of detection of 1.25 × 10 -6 IU/mL and a wide linear range of 1.00 × 10 -5 -1.00 × 10 4 IU/mL. This work not only demonstrates that MBIA and AgNO 3 were the key factors in the growth of Au-Ag hybrid nanoparticles from 2D to 3D structure but also supplies an ultra-sensitive detection method for CA19-9 which has a potential practicability in the clinical early diagnoses of pancreatic cancer., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The development of surface-enhanced Raman scattering (SERS) probes with high sensitivity and stability is imminent to improve the accuracy of cancer diagnosis. Here, an exclusive core-Janus satellite (CJS) assembly was constructed by a hierarchical assembly strategy in which the Au-Ag Janus satellite is vertically self-aligned on the core surface. In the process, a silica shell template was ingeniously employed to asymmetrically mask the presatellites for the in situ formation of the Janus structure, and a series of Janus satellites with different morphologies were developed by regulating the encapsulated area of the presatellites. The ordered-oriented arrangement of Au-Ag Janus and unique heterojunction morphology permit CJS assemblies, featuring two types of plasmonic nanogaps, including intrananocrevices for individual Janus and internanogaps between neighboring Janus, thereby multiplying the "hotspots" compared to conventional core-monotonous satellites, which contributes to superior SERS activity. As anticipated, the enhancement factor of CJS assemblies was as high as 3.8 × 10 8 . Moreover, it is intriguing that the directional distribution and head physically immobilized by Janus provided uniform and stable SERS signals. The SERS probe based on the CJS assembly for the detection of carbohydrate antigen 19-9 resulted in an ultrahigh sensitivity with a limit of detection of 3.7 × 10 -5 IU·mL -1 , which is nearly 10 times lower than other SERS probes, and a wide detection range of 3 × 10 -5 to 1 × 10 4 IU·mL -1 . The CJS assembly with excellent SERS performance is promising to advance further development of the early diagnosis of pancreatic cancer.

Since the colorimetric method has the characteristics of being simple and low cost, the fluorescence spectrum has the characteristics of a strong signal, and Surface-enhanced Raman scattering (SERS) detection has the characteristics of high sensitivity and strong specificity, people usually use these three methods for detection, but the detection of a single sample takes more time. If multiple samples can be tested at the same time, the detection efficiency and sensitivity can be improved, and the selectivity and reliability will be greatly improved. Multiplex sensing also provides a new direction for researchers. To fully understand the research of multiplex sensing based on the plasmonic optics of noble metal nanostructures, this review summarizes all the results previously reported in this field. It also discusses the principles of various detection methods and the biochemical application of multiple detections and finally summarizes the challenges and prospects.

Ligand-mediated interface control has been broadly applied as a powerful tool in constructing asymmetric multicomponent nanoparticles (AMNP), and induces the anisotropic growth with fine-tuning morphology, composition, plasmonic property and functionality. As a new kind of AMNP, the synthesis of Janus Au-Ag nanoparticles with tunable negative surface curvature is still a challenge. Here, we demonstrate that the synergistic surface energy effects between gold nanodumbbells (Au NDs) with a negative surface curvature and 4-mercaptobenzoic acid (4-MBA) can direct the site-selective growth of anisotropic silver domains on gold nanodumbbells (Au NDs@Ag NPs). By adjusting the 4-MBA concentration-dependent interfacial energy, the Au NDs@Ag NPs could be continuously tuned from dumbbell-like core-shell structures, to L-shaped Janus, and then rod-like core-shell structures with directional and asymmetric spatial distributions of resizable Ag domains by site-selective growth. Based on the calculation results of discrete dipole approximation (DDA) method, it has been found that the Au NDs@Ag L-shaped Janus NPs with Ag island domains created polarization orientation-dependent plasmonic extinction spectra and hot spots around the negatively curved waist and Ag domains. The L-shaped Janus Au NDs@Ag NPs exhibited significantly plasmonic spectrum properties with four apparent LSPR peaks that cover from visible to near-infrared range and higher surface-enhanced Raman scattering (SERS) activity compared with the original Au NDs. The best SERS enhancement factor of 1.41 × 10 7 was achieved. This synergistic surface energy effect-based method involving the asymmetric growth of silver coating on gold nanoparticles with negatively curved surface presents a new method to design and fabricate nanometer optical devices based on asymmetric multicomponent nanoparticles., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Herein, A novel gold-silver alloy nanobox (AuAgNB)@SiO 2 -gold nanosphere (AuNP) nanoassembly based on core-shell-satellite structure is fabricated and applied to the surface-enhanced Raman scattering (SERS) detection of S100 calcium-binding protein B protein (S100B). It contains an anisotropic hollow porous AuAgNB core with rough surface, an ultrathin silica interlayer labeled with reporter molecules, and AuNP satellites. The nanoassemblies were systematically optimized by tuning the reporter molecules concentration, silica layer thickness, AuAgNB size, and the size and number of AuNP satellite size. Remarkably, AuNP satellites are adjacent to AuAgNB@SiO 2 , developing AuAg-SiO 2 -Au heterogeneous interface. With the strong plasmon coupling between AuAgNB and AuNP satellites, chemical enhancement from heterogeneous interface, and the tip "hot spots" of AuAgNB, the SERS activity of the nanoassemblies was multiply enhanced. Additionally, the stability of nanostructure and Raman signal was significantly improved by the silica interlayer and AuNP satellites. Eventually, the nanoassemblies were applied for S100B detection. It demonstrated satisfactory sensitivity and reproducibility with a wide detection range of 10 fg/mL-10 ng/mL and a limit of detection (LOD) of 1.7 fg/mL. This work based on the AuAgNB@SiO 2 -AuNP nanoassemblies with multiple SERS enhancements and favorable stability demonstrates the promising application in stroke diagnosis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Bladder cancer (BC) is one of the most common malignant tumors in the urinary system, and its high recurrence rate is a great economic burden to patients. Traditional diagnosis and treatment methods have the disadvantages of insufficient targeting, obvious side effects and low sensitivity, which seriously limit the accurate diagnosis and efficient treatment of BC. Due to their small size, easy surface modification, optical properties such as plasmon resonance, and surface enhanced Raman scattering, good electrical conductivity and photothermal conversion properties, nanomaterials have great potential application value in the realization of specific diagnosis and targeted therapy of BC. At present, the application of nanomaterials in the diagnosis and treatment of BC is attracting great attention and achieving rich research results. Therefore, this paper summarizes the recent research on nanomaterials in the diagnosis and treatment of BC, clarifies the existing advantages and disadvantages, and provides theoretical guidance for promoting the accurate diagnosis and efficient treatment of BC.

In this paper, Au@Ag nanopencil is designed as a multimodality plasmonic nanoprobe based on asymmetric etching for the detection of SCN - and ClO - . Au@Ag nanopencil with Au tip and Au@Ag rod is prepared by asymmetric tailoring of uniformly grown silver-covered gold nanopyramids under the combined effect of partial galvanic replacement and redox reaction. By asymmetric etching in different systems, Au@Ag nanopencil exhibits diversified changes in the plasmonic absorption band: O 2 •- facilitated by SCN - etches Au@Ag rod from the end to the tip, causing a blue shift of the localized surface plasmon resonance (LSPR) peak as the aspect ratio decreases; while the ClO - can retain Au@Ag shell and etch Ag within rod from the tip to the end, causing a redshift of the LSPR peak as the coupling resonance weakens. Based on peak shifts in different directions, a multimodality detection of SCN - and ClO - has been established. The results demonstrate the detection limits of SCN - and ClO - are 160 and 6.7 nm, and the linear ranges are 1-600 µm and 0.05-13 µm, respectively. The finely designed Au@Ag nanopencil not only broadens the horizon of designing heterogeneous structures, but also enriches the strategy of constructing multimodality sensing platform., (© 2023 Wiley-VCH GmbH.)

The incorporation of room temperature ionic liquids (ILs) into dielectric elastomer composites is currently generating great interest due to their potential applications in soft actuators and optical-related devices. Experiments have shown that the electrical properties of IL enhanced soft composites (ILESCs) are dependent on AC (alternating current) frequency of the electrical loading. This current work helps develop a mixed micromechanical model with the incorporation of an electric double layer (EDL) to predict the electrical properties of the ILESCs while revealing the physical mechanisms (including crowding and overscreening structures, percolation thresholds, interfacial tunneling, Maxwell-Wagner-Sillars polarization) that underpin the phenomena. Particularly, Bazant-Storey-Kornyshev (BSK) phenomenological theory is integrated into the EDL surface diffusion model for the first time to evaluate the influence of crowding and overscreening effects. The results show excellent agreement with experimental data of IL enhanced PDMS composites over the frequency range from 1 Hz to 10 GHz. Parametric analysis from the perspective of designing is conducted to explore the methods for optimization of ILESCs with high dielectric constants and frequency-dependent stability. It is found that an IL with a smaller size and aspect ratio increases the dielectric constant of the ILESCs more significantly below the interface relaxation frequency. Increasing the surface charge density of the matrix and using ILs delay the frequency-facilitated dielectric response, which is beneficial to maintain the dielectric stability of the ILESCs.

In this paper, the fluorescence quenching characteristics of Au-Ag-Pt core-shell nanorods have been studied.Due to nonradiative energy transformation, the fluorescence emission intensity of bovine serum albumin (BSA) could be greatly quenched.It has been found that the quenching effect of Au-Ag-Pt core-shell nanorods could be optimized by adjusting the concentration of chloroplatinic acid.Based on the fluorescence quenching properties of Au-Ag-Pt core-shell nanorods, Au-Ag-Pt trimetal fluorescence quenching nanoprobe has been prepared, and the specificity of alpha-fetoprotein (AFP) detection has also been realized.In order to guarantee the sensing specificity, the surface modification including carboxyl replacement, carboxyl activation and antibody connection have been performed on Au-Ag-Pt core-shell nanorods.By using the principle of specific combination of antigen and antibody, the specific detection of AFP has been realized with a lower detection limit of 4.0 pg/mL, and the linear detection range spans a scope from 0.03 to 0.5 ng/mL.Interference experiments and the actual samples detection results show that the Au-Ag-Pt trimetal core-shell nanorod probes have good anti-interference and repeatability., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Plasmonic core-satellite nanostructures assembled from simple building blocks have attracted extensive attention since they were reported by the way of DNA-directed assembly in 1998, because of their unique enhanced and synergistic optical properties and widespread potential applications in biosensing, imaging, drug delivery, and diagnostics. In this review, we introduce the synthetic methods of core-satellite nanostructures, emphazising the bottom-up synthesis method, including DNA, molecular, protein, peptide, amino acids, metal ion-assisted assembly, electrostatic adsorption assembly, clicked-to-assembly, and in situ deposition. Than we review and discuss their morphology classification, and summarize influencing factors of morphology. This is followed by overviews on optical properties, including localized surface plasmon resonance, surface-enhanced Raman scattering, surface-enhanced fluorescence and quenching, and applications in the biomedical field. Finally, the challenges and prospects of these kinds of nanostructures are discussed., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

In this paper, a novel Au@AuAg yolk-shell heterogeneous nanostructure is designed as plasmonic spectroscopic sensor based on surface etching for ultrasensitive detection of trace cobalt ions (Co 2+ ). Due to the surface diffusion of gold atoms, the Ag at one end of the core gold nanobipyramids (Au NBPs) is retained, and Au@AuAg yolk-shell nanostructure with asymmetric core is prepared. The alloy shell is coupled to Au NBPs and the interface of asymmetric Ag respectively, the two local surface plasmon resonance bands will have obvious reverse changes depending on the surface morphology of the shell. By using this distinct plasmon response generated by Co 2+ induced surface etching, which is driven by discrepancy of double-peaks, a sensing method has been established to realize multi-information spectral detection of Co 2+ . There is a good linear relationship between the intensity ratio and the Co 2+ concentration in the range of 1-100 nM, in which the limit of detection is 0.2 nM. This method further improves the sensing capability by combining multiple pieces of strongly changing spectral information, and demonstrates great advantages and potential of Au@AuAg yolk-shell heterogeneous nanostructure as a multi-information plasmonic sensor based on etched shell surface for trace detection., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

The bark-stripping behavior of Formosan sambar, Rusa unicolor swinhoii , has become conspicuous in recent years in the Tataka area of Yushan National Park in Taiwan and a cause for concern to visitors and ecologists. We conducted a monthly survey of 537 tagged trees of 21 species and monitored the abundance of sambar using camera traps from October 2018 to January 2021, aiming to interpret possible causes of the bark-stripping behavior in Tataka. We also used a generalized linear model to evaluate factors that may affect the probability of a tree having its bark stripped. Both our observations and the model predictions showed that sambar has a strong preference for bark of Pinus armandii , Photinia niitakayamensis , and Salix fulvopubeseens and for trees with diameter at breast height around 14 cm. Bark stripping mainly occurred between July and October when major forage was most abundant. However, sambar's need for bark surged in May when sambar abundance was moderate and decreased in October when sambar abundance was high. The seasonality of bark stripping was synchronized with the peak periods of antler development, fawn nursing, and spread of gastrointestinal parasites, suggesting that sambar strips bark to ingest minerals for their physiological needs and/or to acquire plant secondary metabolites to repel gastrointestinal parasites. Sambar abundance alone was not sufficient to predict the overall intensity of bark stripping. Rather, the product of sambar abundance and the necessity index (average wound size) were strongly correlated with the overall bark-stripping intensity. Therefore, controlling sambar abundance is essential but it alone may not be the optimal strategy for controlling bark stripping. A combination of population control and relaxing of sambar's parasite loading and/or physiological needs for minerals is an important strategy to control the overall bark stripping. Future research could use the necessity index to investigate the synchronicity of the bark-stripping behavior, deer's physiological state, environmental factors and phenology to better understand the cause of this behavior.

In this paper, the longitudinal plasmon mode optical properties and localized electric field distribution of a single pentagonal gold nanotube are investigated for the first time by the discrete dipole approximation. It is found that pentagonal gold nanotube has stronger electric field distribution compared with circular gold nanotubes when the incident wavelength is located at the plasmon resonance peak. Additionally, we observed that the longitudinal plasmon resonance peak can blue shift nonlinearly with increasing wall thickness, but red shifts linearly with the increase of the length of the pentagonal gold nanotube. The localized electric field analysis reveals that the longitudinal plasmon peak of the pentagonal gold nanotube originates from the dipole resonance mode. The local electric field intensity is controlled by the wall thickness and length. Notably, the effect of wall thickness on the longitudinal plasmon resonance and electric field enhancement can be attributed to the change of the plasmon coupling position and intensity. This work has enriched the theoretical research of pentagonal gold nanotubes and provided ideas for the preparation of high sensitivity nanoprobes biosensors., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

By using gold nanorods with silver coating as the sacrificial templates, we prepared spiky yolk-shell AuAg bimetallic nanorods with uniform interior gap via galvanic replacement reaction. The length and number of Au tips of the spiky yolk-shell AuAg nanorods can be tuned simultaneously by altering HAuCl 4 volume. The influence of HAuCl 4 volume and the sliver layer thickness on the SERS activity of spiky yolk-shell AuAg nanorods are studied. When the sliver layer is thin, the interior gap has not been shielded completely and the outer shell has obvious tips, thus the surface-enhanced Raman scattering (SERS) activity has the strongest enhancement with an enhancement factor (EF) of 4.9 × 10 5 . The spiky yolk-shell AuAg nanorods with the strongest SERS activity are used as SERS substrates to detect thiram. The results demonstrate that the SERS intensity increases linearly with the logarithmic concentration of thiram in the range of 10 -3 M to 10 -7 M. The detection limit is as low as 97 nM, which is lower than the maximum pesticide residue limit (29 µM) in fruits stipulated by the US Environmental Protection Agency (EPA). Therefore, the spiky yolk-shell AuAg bimetallic nanorods have important practical application value in pesticide detection., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Heterodimers of metal nanoparticles consist of two metals, come in many sizes and adopt various shapes. They offer unique properties due to the presence of two metals and have the extraordinary flexibility needed to serve as a multipurpose platform for diverse applications in areas including photonics, sensing, and catalysis. Heterodimer nanoparticles contain different metals that contribute to extraordinary surface plasmon resonance (SPR), surface-enhanced Raman scattering (SERS), and catalytic properties. These properties make them versatile molecules that can be used in intracellular imaging, as antibacterial agents, as photocatalytic and biological macromolecules and for the detection of chemical substances. Moreover, heterodimer nanoparticles are composed of the two metals within larger molecules that provide more choices for modification and application. In this review, we briefly summarize the lesser-known aspects of heterodimers, including some of their properties, and present concrete examples of recent progress in synthesis and applications. This review provides a perspective on achievements and suggests a framework for future research with a focus on the synthesis and application of heterodimers. We also explore the possible applications of heterodimer nanoparticles based on their unique properties., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

In this paper, the optical properties and local electric field distribution of transverse plasmon mode of a single pentagonal gold nanotube are studied for the first time by the discrete dipole approximation (DDA). We find that the transverse plasmon peaks can nonlinearly red shift from visible to infrared region via controlling the inner diameter. In addition, the transverse plasmon peak firstly blue shifts and then red shifts in the visible region with the increase of outer diameter. Further analysis shows that the spectra red shift with the increase of outer diameters when scattering is dominant. Local electric field analysis reveals that transverse plasmon resonance peaks of gold nanotube mainly come from dipole resonance. When the tube wall is thin enough, multi-polar plasmon resonance mode will be generated, and the number of peaks will be increased. The surface charges of inner and outer tube walls are changed by tuning the inner diameter and outer diameter parameters of pentagonal gold nanotube. The selective controlling transverse plasmon spectra of gold nanotube are realized, which is of great significance to the study of optical properties of gold nanotube and the application of molecular detection and biological imaging., (© 2021 IOP Publishing Ltd.)

Pathogenic bacteria have become a huge threat to social health and economy for their frighteningly infectious and lethal capacity. It is quite important to make a diagnosis in advance to prevent infection or allow a rapid treatment after infection. Noble metal nanoparticles, due to their unique physicochemical properties, especially optical properties, have drawn a great attention during the past decades and have been widely applied into all kinds of fields related to human health. By utilizing these noble metal nanoparticles, optical diagnosis platforms towards pathogenic bacteria have emerged continually, providing highly sensitive, selective, and particularly facile detection tools for clinic or point-of-care diagnosis. This review summarizes the recent development in this field. It begins with a brief introduction of pathogenic bacteria and noble metal nanoparticles. And then, optical detection methods are systematically discussed in three distinct aspects. In addition to these proof-of-concept methods, corresponding algorithms and point-of-care detection devices are also described. Finally, the review ends up with subjective views on present limitations and some appropriate advice for future research directions., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

In this work, we reported a facile and highly sensitive strategy for colorimetric detection of cysteine (Cys) based on the inhibition of catalytic activity of bimetallic nanoclusters induced by Cys. Glutathione-modified gold-platinum nanoclusters (GSH-Au/Pt NCs) with different Au/Pt molar ratios were prepared via one-pot approach and utilized as peroxidase mimics to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H 2 O 2 . It has been found that Cys could inhibit the peroxidase-like activity of GSH-Au/Pt NCs efficiently, which leads to a decrease of the absorption intensity of the system at 652 nm with a fading of the blue color. These findings provide a worthy method for visualization and quantitative detection of Cys with different concentrations in the range from 0.5 to 30 μM, and the detection limit is 0.154 μM. Moreover, this method displays a promising application in colorimetric analysis of Cys in urine samples., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

This article describes a process of fabricating highly porous paper from cellulosic fibers and carbon black (CB) with tunable conductivity. By embossing such paper, its porosity decreases while its conductivity increases. Tuning the porosity of composite paper alters the magnitude and trend of conductivity over a spectrum of concentrations of conductive particles. The largest increase in conductivity from 8.38 × 10 -6 to 2.5 × 10 -3 S/m by a factor of ∼300 occurred at a percolation threshold of 3.8 wt % (or 0.36 vol %) with the composite paper plastically compressed by 410 MPa, which caused a decrease of porosity from 88% to 42% on average. Our composite paper showed stable piezoresistive responses within a broad pressure range from 1 kPa up to 5.5 MPa for 800 cycles. The piezoresistive sensitivities of the composite paper were dependent on concentration and decreased with pressure. Composite paper with 7.5 wt % CB had sensitivities of -0.514 kPa -1 over applied pressures ranging from 1 to 50 kPa and -0.215 kPa -1 from 1 to 250 kPa. This piezoresistive paper with embossed patterns enabled touch sensing and detection of damage from darts and punches. Understanding the percolation behavior of three-phase composites (cellulosic fibers/conductive particles/air) and their response to damage, pressure, and processing conditions has the potential to enable scalable applications in prosthetics and robotics, haptic feedback, or structural health monitoring on expansive surfaces of buildings and vehicles.

This review (with 106 references) summarizes the latest progress in the synthesis, properties and biomedical applications of gold nanotubes (AuNTs). Following an introduction into the field, a first large section covers two popular AuNTs synthesis methods. The hard template method introduces anodic alumina oxide template (AAO) and track-etched membranes (TeMs), while the sacrificial template method based on galvanic replacement introduces bimetallic, trimetallic AuNTs and AuNT-semiconductor hybrid materials. Then, the factors affecting the morphology of AuNTs are discussed. The next section covers their unique surface plasmon resonance (SPR), surface-enhanced Raman scattering (SERS) and their catalytic properties. This is followed by overviews on the applications of AuNTs in biosensors, protein transportation, photothermal therapy and imaging. Several tables are presented that give an overview on the wealth of synthetic methods, morphology factors and biological application. A concluding section summarizes the current status, addresses current challenges and gives an outlook on potential applications of AuNTs in biochemical detection and drug delivery.Graphical abstract.

Colorimetric sensing methods based on non-spherically symmetric gold (Au) nanoparticles have become a powerful tool in the field of biomedical detection due to their intriguing plasmonic properties. In this study, Au nanobipyramids (Au NBPs) were used as colorimetric sensing probes to detect ferrous ions (Fe 2+ ) through tip etching. The quick etching of Au NBPs along the longitudinal direction by superoxide radicals generated by the reaction of Fe 2+ and H 2 O 2 led local surface plasmon resonance (LSPR) to blue shift and produced vivid color change that could be used for visual inspection. Under the optimal reaction conditions, the peak shift of the Au NBPs and the logarithm of the concentrations of Fe 2+ had a linear relationship in the range of 10 nM to 10 μM, with a very low detection limit of 1.29 nM. During the etching process, a different end shape of the Au nanoparticles results in a different process for the morphology transition, which makes the degree of spectral change and detection sensitivity significantly different. In the presence of trace amounts of Fe 2+ (<1000 nM), the detection sensitivity of Au NBPs with sharp ends which rely on aspect ratio and truncation is nine times higher than that of gold nanorods with round ends which only rely on aspect ratio. Although the color change of larger-sized Au NBPs was not clear during detection, the LSPR peak shift was more severe. Therefore, the system provides different modes for detecting Fe 2+ according to Au NBPs with different sizes and characteristics.

Au@AuAg yolk-shell nanorods with tunable and uniform interior gap were synthesized through galvanic replacement reaction, where Au@Ag core-shell nanorods served as sacrificial templates and HAuCl 4 solution served as reductant. The effects of HAuCl 4 , Ag shell thickness and aspect ratio (AR) of Au nanorods on the morphology of Au@AuAg yolk-shell nanorods had been investigated systemically. The results clearly indicated that AuAg alloy shell thickness of Au@AuAg yolk-shell nanorods could be increased from 3.6 to 10.0 nm by varying the amount of HAuCl 4 . Meanwhile, the shape of AuAg alloy shell could be tuned by changing the shape of Ag coating. With the increasing of Ag coating thickness, the interior gap could be finely tuned in the range from 2.6 to 8.1 nm. The uniformity of interior gap could be improved by increasing the AR of Au nanorods. All these tunable geometries can further affect the plasmonic spectral properties of Au@AuAg yolk-shell nanorods. Because of the appearance of interior gap, the longitudinal localized surface plasmon resonance (LSPR) peak of Au@AuAg yolk-shell nanorods was located between that of bare Au nanorods and Au@Ag core-shell nanorods without interior gap. The increase of outer AuAg shell thickness can weaken the coupling between the inner and outer surface of the AuAg shell and lead to the decrease of AR, so the transverse and longitudinal LSPR bands gather together. The decrease of Ag coating thickness can enhance the coupling between inner Au nanorod and outer AuAg shell, which results in the red shift of the longitudinal LSPR band. This paper provides a method for studying the plasmonic coupling between two metal surfaces with a metal layer or a dielectric layer, which is also a new approach for regulating the plasmonic spectral properties of bimetallic nanoparticles. The controllability of Au@AuAg yolk-shell nanorods in both the interior gap and outer alloy shells makes them have potential applications in biomedicine, catalysis, nanoreactors, and energy storage., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Electrical conductivity is one of several outstanding features of graphene-polymer nanocomposites, but calculations of this property require the intricate features of the underlying conduction processes to be accounted for. To this end, a novel Monte Carlo method was developed. We first established a randomly distributed graphene nanoplatelet (GNP) network. Then, based on the tunneling effect, the contact conductance between the GNPs was calculated. Coated surfaces (CSs) were next set up to calculate the current flow from the GNPs to the polymer. Using the equipotential approximation, the potentials of the GNPs and CSs met Kirchhoff's current law, and, based on Laplace equation, the potential of the CSs was obtained from the potential of the GNP by the walk-on-spheres (WoS) method. As such, the potentials of all GNPs were obtained, and the electrical conductivity of the GNP polymer composites was calculated. The barrier heights, polymer conductivity, diameter and thickness of the GNP determining the electrical conductivity of composites were studied in this model. The calculated conductivity and percolation threshold were shown to agree with experimental data.

In this work, we developed a simple, effective fluorescence method to detect Hg 2+ by inhibiting core-satellite assemblies of gold nanorods (AuNRs) and gold nanospheres (AuNPs). The fluorescence of Rhodamine 6G (Rh6G), which was simply mixed with the nanoassemblies, was efficiently quenched by the inner filter effect (IFE). When the heterogenous core-satellite nanostructures were assembled, the corresponding local surface plasmon resonance (LSPR) absorption shifts and broadens which results in the increase of the spectral overlap between the emission peak and the absorption band and more efficient energy transfer from Rh6G to nanoparticles. Fluorescence quenching efficiency is related to the size and number density of satellite nanoparticles. It is interesting that the AuNR-AuNP assemblies with the moderate size and high density of AuNPs have the best fluorescence quenching efficiency. In the presence of Hg 2+ , p-aminothiophenol (p-ATP) breaks away from the surface of AuNRs and competitively bounds to Hg 2+ , resulting in a low yield of the AuNR-AuNP assemblies, which further leads to the decrease of fluorescence quenching efficiency. Under the optimum conditions, the limit of detection (LOD) for Hg 2+ was 0.18 nM, with an excellent linear response from 0.6 to 800 nM. Interference experiment and real samples detection indicate that these nanosensors endowed with higher sensitivity and selectivity for the detection of Hg 2+ in the real samples. Compared with the conventional Hg 2+ detection techniques, this method based on Hg 2+ induced inhibition of core-satellite AuNR-AuNP assemblies has better performance and is suitable for the detection of Hg 2+ ., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2018 Elsevier B.V. All rights reserved.)

A ratiometric fluorescence method is designed and exploited for the sensitive detection of Hg 2+ and Fe 3+ ions, which is prepared by simply mixing bovine serum albumin-protected gold/silver nanoclusters (BSA-Au/Ag NCs) with histidine-stabilized gold nanoclusters (His-Au NCs). The as-prepared Au NCs/Au-Ag NCs solution emits pink fluorescence and exhibits two emission peaks around 485 and 660 nm excited by 370 nm. The fluorescence of the Au NCs/Au-Ag NCs system at 660 nm is obviously quenched in the presence of Hg 2+ , while the fluorescence at 485 nm is stable against Hg 2+ , thereby resulting in the decrease of fluorescence intensity ratio (I 660 /I 485 ) of the system. The detection limit for Hg 2+ is low as 1.56 nM. With the addition of Fe 3+ , the dual emission peaks of the Au NCs/Au-Ag NCs in the system show a substantial decline simultaneously with different rate, leading to the Fe 3+ ions concentration-dependent variation of I 660 /I 485 value. The linear detection range for Fe 3+ is from 5 to 1000 μM. Furthermore, the developed fluorimetric strategy has been employed for separately analysis of different ions Hg 2+ and Fe 3+ in fish samples with satisfactory results.

The applications of metallic nanoclusters and nanoparticles in biological sensing have attracted special attention owing to their optical interaction based on fluorescence and surface plasmon resonance (SPR). In this work, we designed a fluorescent nanoprobe for the determination of L-cysteine (L-Cys) based on fluorescence resonance energy transfer (FRET) from gold‑silver bimetallic nanoclusters (Au-Ag NCs) to gold nanorods (AuNRs). Firstly, the negatively charged Au-Ag NCs protected by bovine serum albumin (BSA) are directly adsorbed on the surface of the positively charged AuNRs through electrostatic interaction, and the FRET effect leads to distinct fluorescence quenching of Au-Ag NCs at 615nm. The SPR wavelength of AuNRs is dependent on the aspect ratio, so the SPR of AuNRs could be tuned to have a better spectral overlap with fluorescence of Au-Ag NCs, which enhances the fluorescence quenching effect. Because the SH group of L-Cys has an affinity with gold, the addition of L-Cys can result in the release of Au-Ag NCs from the surface of AuNRs via forming AuS bonds. Thus, the introduction of L-Cys could effectively restore the fluorescence emission of the AuNRs/Au-Ag NCs system because of the restraint of FRET effect. Under the optimized conditions, the fluorescence recovery of AuNRs/Au-Ag NCs probe exhibits a linear response to L-Cys concentration ranging from 5 to 100μM, and the corresponding theoretical detection limit (LOD) is 1.73μM. Meanwhile, this method displays excellent sensitivity and selectivity for L-Cys over other amino acids, and it has been successfully applied to detect L-Cys in real samples., (Copyright © 2019. Published by Elsevier B.V.)

In this paper, we develop a theoretical principle to calculate the direct and converse magnetoelectric (ME) coupling response of ferromagnetic/ferroelectric composites with 2-2 connectivity. We first present an experimentally based constitutive equation for Terfenol-D, and then build the mechanism of domain switch for the ferroelectric phase. In the latter, the change of Gibbs free energy, thermodynamic driving force and kinetic equations for domain growth are also established. These two sets of constitutive equations are shown to capture the experimental data of Terfenol-D and PZT, respectively, well. For the direct effect under an applied magnetic field, the induced electric field and the overall ME coupling coefficient are determined. For the converse effect under an applied electric field, the induced magnetization and the excited magnetic field are obtained. Both the induced electric filed under direct effect and the excited magnetic field under converse effect are shown to display the hysteretic characteristics, and also in good agreement with experiments. We conclude that the developed theory can both qualitatively and quantitatively reflect the essential features of nonlinear direct and converse ME coupling of the multiferroic composites., Competing Interests: We declare we have no competing interests.

In this paper, the magnetoelectric (ME) effect is investigated in two kinds of A-line shape Terfenol-D/PZT-5A structures by changing the position of the NdFeB permanent magnet. The experimental results show that both ME composite structures had multiple resonance peaks. For the ME structure with acrylonitrile-butadiene-styrene (ABS) trestles, the resonance peak was different for different places of the NdFeB permanent magnet. Besides, the maximum of the ME coefficient was 4.142 V/A at 32.2 kHz when the NdFeB permanent magnet was on top of the Terfenol-D layer. Compared with the ME coefficient with a DC magnetic field, the ME coefficient with NdFeB magnets still maintained high values in the frequency domain of 65~87 kHz in the ME structure with mica trestles. Through Fourier transform analysis of the transient signal, it is found that the phenomenon of multiple frequencies appeared at low field frequency but not at high field frequency. Moreover, the output ME voltages under different AC magnetic fields are shown. Changing the amplitude of AC magnetic field, the magnitude of the output voltage changed, but the resonant frequency did not change. Finally, a finite element analysis was performed to evaluate the resonant frequency and the magnetic flux distribution characteristics of the ME structure. The simulation results show that the magnetic field distribution on the surface of Terfenol-D is non-uniform due to the uneven distribution of the magnetic field around NdFeB. The resonant frequencies of ME structures can be changed by changing the location of the external permanent magnet. This study may provide a useful basis for the improvement of the ME coefficient and for the optimal design of ME devices.

The identification and detection of cancer biomarkers in early stages is an important issue for the therapy of cancer. However, most methods are time-consuming and have limited sensing sensitivity and specificity. In this work, we prepared a novel plasmonic multilayered core-shell-satellite nanostructure (Au@Ag@SiO 2 -AuNP) consisting of a gold nanosphere with a silver coating core (Au@Ag), an ultrathin continuous silica (SiO 2 ) shell, and a high coverage of gold nanosphere (AuNP) satellites. The Au@Ag core is a prominent surface enhanced Raman scattering (SERS) platform, and the thin SiO 2 layer exhibits a long-range plasmon coupling between the Au@Ag core to the AuNP satellites, further leading to enhanced Raman scattering. Meanwhile, the outer AuNP satellites have a high biocompatibility and long-term stability. Combining the above advantages, the well-designed metallic nanoassemblies would be a promising candidate for SERS-based applications in biochemistry. For specific detection of alpha-fetoprotein (AFP), we utilized the SERS-active core-shell-satellite nanostructures modified with AFP antibody as immune probes and nitrocellulose membrane (NC) stabilized captured anti-AFP antibodies as solid substrate. To improve the detection performance, we further systematically optimized the parameters, including the silver coating thickness of the Au@Ag core and the density and size of the satellite AuNPs. Under the optimized conditions, AFP could be detected by the SERS-based sandwich immunoassay with an ultralow detection limit of 0.3 fg/mL, and the method exhibited a wide linear response from 1 fg/mL to 1 ng/mL. The limit of detection (LOD) was considerably lower than conventional methods in the literature. This work relies on the unique Au@Ag@SiO 2 -AuNP nanostructures as the immune probe develops a new outlook for the application of multilayered nanoassemblies and demonstrates the great potential in early tumor marker detection.

The super-multibranched AuAg bimetallic nanostructures are synthesized due to the aggregation of Au nanostars in the process of silver coating. The super-multibranched bimetallic nanostructures with different silver coating thickness are obtained by changing the concentration of silver nitrate and ascorbic acid. It has been found that the formation of these nanostructures is due to the stacking of several nanostars during the process of silver coating. By comparing the silver coating process of gold nanostars with different branch lengths, we found that the nanostars with longish branches are easy to aggregate and form the super-multibranched nanostructures in the process of silver coating. In the AuAg bimetallic nanostructures, the silver layer is mainly covered on the surface of the cores and the thickness increases with the increasing of the AgNO 3 , which leads to the change of the surface-enhanced Raman scattering (SERS) activity. It has been found that the SERS activity is stronger when the silver layer is thin and the Au branches are still exposed to the outside of the Ag shell. The sample with the strongest SERS activity has been used to detect thiram with different concentrations. The Raman intensity increases linearly with the logarithmic concentration of thiram ranging from 10 -3 to 10 -7  M with a detection limit of 6.3 × 10 -7 M. These experimental results show that the super-multibranched bimetallic nanostructures have a broad application prospect in molecular detection and biologic sensing based on SERS., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In this report, Ag-dielectric-Au three-layered nanoshells with controlled inner core size were synthesized. The fluorescence emission of the rhodamine 6G (R6G) could be quenched by the three-layered nanoshells distinctly. What's more, the fluorescence quenching efficiency could be further improved by tuning the etching of inner Ag nanosphere. The maximum fluorescence quenching efficiency is obtained when the separate layer just appears between the inner Ag core and the outer Au shell. Whereas the fluorescence quenching efficiency is weakened when no gaps take place around the inner Ag core or the separate layer is too thick and greater than 13nm. The fluorescence quenching properties of the Ag-dielectric-Au three-layered nanoshells with different initial sizes of the Ag nanoparticles are also studied. The maximum fluorescence quenching efficiency is obtained when the three-layered nanoshells are synthesized based on the Ag nanoparticles with 60nm, which is better than others two sizes (42 and 79nm). Thus we believe that the size of initial Ag nanospheres also greatly affects the optimized fluorescence quenching efficiency. These results about fluorescence quenching properties of Ag-dielectric-Au three-layered nanoshells present a potential for design and fabrication of fluorescence nanosensors based on tuning the geometry of the inner core and the separate layer., (Copyright © 2018. Published by Elsevier B.V.)

Bimodal nanostructured (NS) metals, in which the nano-grains or ultrafine grains serve as matrix phase while the coarse grains serve as toughening phase, can synergize the overall strength and ductility to achieve excellent bullet-proof performance. Because of the extrusion process in the fabrication, the coarse-grained (CG) inclusions are elongated in the extrusion direction and elliptical CG inclusions with different aspect ratios form. The shape, distribution, and volume fraction of these elliptical CG inclusions can all have significant influence on the overall ballistic performance. In this study, the strain gradient plasticity model together with the Johnson⁻Cook failure criterion is employed to investigate the ballistic performance of the bimodal NS Cu with elliptical CG inclusions. Our results show that the ballistic performance can be improved by increasing the aspect ratio of the elliptical CG inclusions. Furthermore, the staggered distribution of the elliptical CG inclusions will decrease the overall ability of the material to resist failure, but it will improve its overall ability to resist deformation. The larger stagger degree of elliptical CG inclusions can weaken their shape effects on the limit displacement.

The detection of tumor biomarkers in the early stage is highly desirable for the therapy of cancer. However, rapid, low-cost, sensitive, and selective detection of biomarkers remains a challenge owing to the sequence homology, short length, and low abundance. This Research Article describes the synthesis of a novel carcinoembryonic antigen (CEA) probe using hollow porous gold nanoparticles (HPGNPs) with roughened surface based on fluorescence quenching. For specific detection of CEA, the surface of HPGNP is modified by carboxyl modification, carboxyl activation, and antibody conjugation. Furthermore, to enhance the detection performance, we have systematically optimized the parameters, such as particle size, surfactants, surface roughness, surface hole size, and the molecule-particle distance (MPD). The results demonstrate that the fluorescence quenching efficiency would be enhanced with a larger particle size and surface hole size, roughened surface and a greater MPD. Also, with careful inspection of different surfactants of CTAB and PVP, we find that PVP has the optimal performance on fluorescence quenching. Under these optimized conditions, CEA could be detected with an ultralow detection limit of 1.5 pg/mL, and the probe shows a linear range from 2 to 100 pg/mL. The limit of detection is an order of intensity lower than related methods. Interference experiment results have shown that the influence of the interfering proteins could be neglected in the detection procedure.

Electrocaloric (EC) materials show promise in eco-friendly solid-state refrigeration and integrable on-chip thermal management. While direct measurement of EC thin-films still remains challenging, a generic theoretical framework for quantifying the cooling properties of rich EC materials including normal-, relaxor-, organic- and anti-ferroelectrics is imperative for exploiting new flexible and room-temperature cooling alternatives. Here, we present a versatile theory that combines Master equation with Maxwell relations and analytically relates the macroscopic cooling responses in EC materials with the intrinsic diffuseness of phase transitions and correlation characteristics. Under increased electric fields, both EC entropy and adiabatic temperature changes increase quadratically initially, followed by further linear growth and eventual gradual saturation. The upper bound of entropy change (∆S max ) is limited by distinct correlation volumes (V cr ) and transition diffuseness. The linearity between V cr and the transition diffuseness is emphasized, while ∆S max  = 300 kJ/(K.m 3 ) is obtained for Pb 0.8 Ba 0.2 ZrO 3 . The ∆S max in antiferroelectric Pb 0.95 Zr 0.05 TiO 3 , Pb 0.8 Ba 0.2 ZrO 3 and polymeric ferroelectrics scales proportionally with V cr -2.2 , owing to the one-dimensional structural constraint on lattice-scale depolarization dynamics; whereas ∆S max in relaxor and normal ferroelectrics scales as ∆S max ~ V cr -0.37 , which tallies with a dipolar interaction exponent of 2/3 in EC materials and the well-proven fractional dimensionality of 2.5 for ferroelectric domain walls.

Highly aligned graphene-based nanocomposites are of great interest due to their excellent electrical properties along the aligned direction. Graphene fillers in these composites are not necessarily perfectly aligned, but their orientations are highly confined to a certain angle, [Formula: see text] with 90° giving rise to the randomly oriented state and 0° to the perfectly aligned one. Recent experiments have shown that electrical conductivity and dielectric permittivity of highly aligned graphene-polymer nanocomposites are strongly dependent on this distribution angle, but at present no theory seems to exist to address this issue. In this work we present a new effective-medium theory that is derived from the underlying physical process including the effects of graphene orientation, filler loading, aspect ratio, percolation threshold, interfacial tunneling, and Maxwell-Wagner-Sillars polarization, to determine these two properties. The theory is formulated in the context of preferred orientational average. We highlight this new theory with an application to rGO/epoxy nanocomposites, and demonstrate that the calculated in-plane and out-of-plane conductivity and permittivity are in agreement with the experimental data as the range of graphene orientations changes from the randomly oriented to the highly aligned state. We also show that the percolation thresholds of highly aligned graphene nanocomposites are in general different along the planar and the normal directions, but they converge into a single one when the statistical distribution of graphene fillers is spherically symmetric.

Unlike mechanical creep with inelastic deformation, electric creep with domain evolution is a rarely studied subject. In this paper, we present a theory of electric creep and related electromechanical coupling for both non-poled and fully poled ferroelectric ceramics. We consider electric creep to be a time-dependent process, with an initial condition lying on the D (electric displacement) versus E (electric field) hysteresis loop. Both processes are shown to share the same Gibbs free energy and thermodynamic driving force, but relative to creep, the hysteresis loop is just a field-dependent process. With this view, we develop a theory with a single thermodynamic driving force but with two separate kinetic equations, one for the field-dependent loops in terms of a Lorentzian-like function and the other for the time-dependent D in terms of a dissipation potential. We use the 0°-90° and then 90°-180° switches to attain these goals. It is demonstrated that the calculated results are in broad agreement with two sets of experiments, one for a non-poled PIC-151 and the other for a fully poled PZT-5A. The theory also shows that creep polarization tends to reach a saturation state with time and that the saturated polarization has its maximum at the coercive field.

The importance of olfaction for various avian behaviors has become increasingly evident. So far, the use of olfaction for food detection among raptors has only been demonstrated for Cathartes vultures. The Oriental honey buzzard (Pernis orientalis) is a resident and migrant in Taiwan and regularly forages in apiaries. One of its foods in apiaries is yellow pollen dough, a softball-sized mixture of pollen, soybeans, and sugar that beekeepers provide as a supplementary food for bees. Given that pollen dough is not similar to any naturally occurring food, we hypothesized that buzzards identify the dough's nutritious contents using olfaction, perhaps in combination with vision. Using a series of choice experiments in which individuals could choose between two doughs, we showed that (1) buzzards almost unerringly chose pollen-containing over pollen lacking doughs when otherwise the doughs were identical in size, shape, and yellow color; (2) buzzards always preferred yellow over black or green doughs if both doughs contained pollen; (3) buzzards still preferred pollen-containing over pollen-lacking doughs when both doughs were black, but at a lower rate than in (1). We statistically excluded the possible influences of the doughs' relative brightness or of repeat visits by the same individuals. Our experiments thus suggest the use of a 'multi-modal foraging strategy' among buzzards whereby olfaction and vision are likely to be both used in identifying food at close distances. We also estimated the olfactory receptor gene repertoire size in the buzzard's genome which is almost five times as large as that of three other raptor species. Therefore, olfaction is likely of far greater ecological importance to this species than to other raptor species. We suggest that olfaction should be considered in the design of behavioral and genetic studies to better understand the use of multiple senses in avian behaviors.

The Lanyu is a miniature pig breed indigenous to Lanyu Island, Taiwan. It is distantly related to Asian and European pig breeds. It has been inbred to generate two breeds and crossed with Landrace and Duroc to produce two hybrids for laboratory use. Selecting sets of informative genetic markers to track the genetic qualities of laboratory animals and stud stock is an important function of genetic databases. For more than two decades, Lanyu derived breeds of common ancestry and crossbreeds have been used to examine the effectiveness of genetic marker selection and optimal approaches for individual assignment. In this paper, these pigs and the following breeds: Berkshire, Duroc, Landrace and Yorkshire, Meishan and Taoyuan, TLRI Black Pig No. 1, and Kaohsiung Animal Propagation Station Black pig are studied to build a genetic reference database. Nineteen microsatellite markers (loci) provide information on genetic variation and differentiation among studied breeds. High differentiation index (FST) and Cavalli-Sforza chord distances give genetic differentiation among breeds, including Lanyu's inbred populations. Inbreeding values (FIS) show that Lanyu and its derived inbred breeds have significant loss of heterozygosity. Individual assignment testing of 352 animals was done with different numbers of microsatellite markers in this study. The testing assigned 99% of the animals successfully into their correct reference populations based on 9 to 14 markers ranking D-scores, allelic number, expected heterozygosity (HE) or FST, respectively. All miss-assigned individuals came from close lineage Lanyu breeds. To improve individual assignment among close lineage breeds, microsatellite markers selected from Lanyu populations with high polymorphic, heterozygosity, FST and D-scores were used. Only 6 to 8 markers ranking HE, FST or allelic number were required to obtain 99% assignment accuracy. This result suggests empirical examination of assignment-error rates is required if discernible levels of co-ancestry exist. In the reference group, optimum assignment accuracy was achievable achieved through a combination of different markers by ranking the heterozygosity, FST and allelic number of close lineage populations.

We designed 10 new microsatellite markers for the oriental honey buzzard (Pernis ptilorhyncus) and tested them on 44 individuals. The number of alleles ranged from two to 12 with an average of five, while the observed heterozygosity ranged from 0.273 to 1.0. Linkage disequilibrium was not found. These markers are being used in a study of the ecology of this species in Taiwan. We also tested their utility on eight other raptor species., (© 2009 The Authors. Journal compilation © 2009 Blackwell Publishing Ltd.)

Seed dispersal is a critical but poorly understood life-history stage of plants. Here we use a genetic approach to describe seed dispersal patterns accurately in a natural population of the Neotropical tree species Jacaranda copaia (Bignoniaceae). We used microsatellite genotypes from maternally derived tissue on the diaspore to identify which individual of all possible adult trees in the population was the true source of a given seed collected after it dispersed. Wind-dispersed seeds were captured in two different years in a large array of seed traps in an 84-ha mapped area of tropical forest on Barro Colorado Island, Panama. We were particularly interested in the proportion of seeds that traveled long distances and whether there was evidence for direct dispersal into gaps, which are required for successful recruitment of this pioneer tree species. Maximum likelihood procedures were used to fit single- and multiple-component dispersal kernels to the distance data. Mixture models, with separate distributions near and far, best fit the observed dispersal distances, albeit with considerable uncertainty in the tail. We discuss the results in light of different mechanisms responsible for separate distributions near the adult source and in the tail of the curve.