Search

Reactions between 1,2-di(tetrazol-2-yl)ethane (ebtz), 1,6-di(tetrazol-2-yl)hexane (hbtz) or 1,1′-di(tetrazol-1-yl)methane (1ditz) and Fe(BF4)2 in the presence of adiponitrile (ADN), glutaronitrile (GLN) or suberonitrile (SUN) resulted in the formation of coordination polymers [Fe(μ-ebtz)2(μ-ADN)](BF4)2 (1), [Fe(μ-hbtz)2(μ-ADN)](BF4)2 (2), [Fe(μ-1ditz)2(GLN)2](BF4)2·GLN (3) and [Fe(μ-1ditz)2(μ-SUN)](BF4)2·SUN (4). It was established that the application of dinitriles allows an increase in the dimensionality of the ebtz and hbtz based systems while maintaining the structure of the polymeric units characteristic of previously studied mononitrile based analogues. In 3 and 4, regardless of the type of dinitrile coligand, the motif of 2D polymeric layers constituted by 1ditz molecules remains preserved. However, the dimensionality of 1ditz based networks is governed by the coordination modes of dinitriles. 3, based on a shorter molecule of glutaronitrile, crystallizes as a two-dimensional (2D) coordination polymer. In this compound, dinitriles coordinate monodentately or play the role of guest molecules. The substitution of glutaronitrile with suberonitrile enables the bridging of neighboring polymeric layers, resulting in a 3D network. The intentional selection of bis(tetrazoles) and dinitriles as building blocks has led, as expected, to obtaining systems with the structure of the first coordination sphere consisting of four tetrazole rings and two axially coordinated nitrile molecules. It created the conditions required for the occurrence of thermally induced spin crossover. Magnetic measurements and single crystal X-ray diffraction studies were used for the characterization of the spin crossover properties of 1–4. [ABSTRACT FROM AUTHOR]

Cooling [Fe(bbtr)3](BF4)2 (bbtr=1,4‐di(1,2,3‐triazol‐1‐yl)butane) triggers very slow spin crossover below 80 K (T1/2↓=76 K). The spin crossover (SCO) is accompanied by a hysteresis loop (T1/2↑=89 K). In contrast to isostructural perchlorate analogue [Fe(bbtr)3](ClO4)2 in which spin crossover during cooling is preceded by phase transition at TPT=126 K in tetrafluoroborate phase transition does not occur to the beginning of spin crossover (80 K). Studies of mixed crystals [Fe(bbtr)3](BF4)2(1‐x)(ClO4)2x (0.5≤x≤0.9) showed that a phase transition precedes spin crossover, however, for x≅0.46 intersection of T1/2(x) and TPT(x) dependencies takes place. The application of pressure of 1 GPa shifts the spin crossover in [Fe(bbtr)3](BF4)2 to a temperature above 270 K. High‐pressure studies of neat tetrafluoroborate and perchlorate, as well as mixed crystals [Fe(bbtr)3](BF4)2(1‐x)(ClO4)2x (0.1≤x≤0.9), revealed that at 295 K P1/2 value changes linearly with x indicating similar mechanism of spin crossover under elevated pressure in all systems under investigation. Variable pressure single crystal X‐ray diffraction studies confirmed that in contrast to thermally induced spin crossover undergoing differently in tetrafluoroborate and perchlorate an application of high pressure removes this differentiation leading to a similar mechanism depending at first on start spin crossover and then P‐3→P‐1 phase transition occurs. In this report we have shown that 2D coordination polymer [Fe(bbtr)3](BF4)2 (bbtr=1,4‐di(1,2,3‐triazol‐1‐yl)butane) treated to date as spin crossover silent shows thermally induced spin crossover phenomenon. Spin crossover in tetrafluoroborate is extremely slow. Determination of the spin crossover curve required carrying measurement in the settle mode‐cooling from 85 to 70 K took about 600 h (average velocity of change of temperature ca. 0.0004 K/min). [ABSTRACT FROM AUTHOR]

Cooling [Fe(bbtr)3](BF4)2 (bbtr=1,4‐di(1,2,3‐triazol‐1‐yl)butane) triggers very slow spin crossover below 80 K (T1/2↓=76 K). The spin crossover (SCO) is accompanied by a hysteresis loop (T1/2↑=89 K). In contrast to isostructural perchlorate analogue [Fe(bbtr)3](ClO4)2 in which spin crossover during cooling is preceded by phase transition at TPT=126 K in tetrafluoroborate phase transition does not occur to the beginning of spin crossover (80 K). Studies of mixed crystals [Fe(bbtr)3](BF4)2(1‐x)(ClO4)2x (0.5≤x≤0.9) showed that a phase transition precedes spin crossover, however, for x≅0.46 intersection of T1/2(x) and TPT(x) dependencies takes place. The application of pressure of 1 GPa shifts the spin crossover in [Fe(bbtr)3](BF4)2 to a temperature above 270 K. High‐pressure studies of neat tetrafluoroborate and perchlorate, as well as mixed crystals [Fe(bbtr)3](BF4)2(1‐x)(ClO4)2x (0.1≤x≤0.9), revealed that at 295 K P1/2 value changes linearly with x indicating similar mechanism of spin crossover under elevated pressure in all systems under investigation. Variable pressure single crystal X‐ray diffraction studies confirmed that in contrast to thermally induced spin crossover undergoing differently in tetrafluoroborate and perchlorate an application of high pressure removes this differentiation leading to a similar mechanism depending at first on start spin crossover and then P‐3→P‐1 phase transition occurs. In this report we have shown that 2D coordination polymer [Fe(bbtr)3](BF4)2 (bbtr=1,4‐di(1,2,3‐triazol‐1‐yl)butane) treated to date as spin crossover silent shows thermally induced spin crossover phenomenon. Spin crossover in tetrafluoroborate is extremely slow. Determination of the spin crossover curve required carrying measurement in the settle mode‐cooling from 85 to 70 K took about 600 h (average velocity of change of temperature ca. 0.0004 K/min). [ABSTRACT FROM AUTHOR]

Reaction of 1,2‐di(tetrazol‐2‐yl)ethane (ebtz) with Fe(BF4)2⋅6 H2O in different nitriles yields one‐dimensional coordination polymers [Fe(ebtz)2(RCN)2](BF4)2⋅nRCN (n=2 for R=CH3 (1) and n=0 for R=C2H5 (2) C3H7 (3), C3H5 (4), CH2Cl (5)) exhibiting spin crossover (SCO). SCO in 1 and 3–5 is complete and occurs above 160 K. In 2, it is shifted to lower temperatures and is accompanied by wide hysteresis (T1/2↓=78 K, T1/2↑=123 K) and proceeds extremely slowly. Isothermal (80 K) time‐resolved single‐crystal X‐ray diffraction studies revealed a complex nature for the HS→LS transition in 2. An initial, slow stage is associated with shrinkage of polymeric chains and with reduction of volume at 77 % (in relation to the difference between cell volumes VHS−VLS) whereas only 16 % of iron(II) ions change spin state. In the second stage, an abrupt SCO occurs, associated with breathing of the crystal lattice along the direction of the Fe–nitrile bonds, while the nitriles reorient. HS→LS switching triggered by light (808 nm) reveals the coupling of spin state and nitrile orientation. The importance of this coupling was confirmed by studies of [Fe(ebtz)2(C2H5CN/C3H7CN)2](BF4)2 mixed crystals (2 a, 2 b), showing a shift of T1/2 to higher values and narrowing of the hysteresis loop concomitant with an increase of the fraction of butyronitrile. This increase reduces the capability of nitrile molecules to reorient. Density functional theory (DFT) studies of models of 1–5 suggest a particular possibility of 2 to adopt a low (140–145°) value of its Fe‐N‐C(propionitrile) angle. [ABSTRACT FROM AUTHOR]

An amino acid containing octanuclear heterometallic {[Mn III3 Ca]2} cluster has been synthesized, alongside a structurally-related trigonal prismatic [Mn III6 Ca]2+ cage. [ABSTRACT FROM AUTHOR]

The synthesis of a bitopic ligand, 2-hydroxy-1-(tetrazol-1-yl)-3-(tetrazol-2-yl)propane containing 1-substituted and 2-substituted tetrazole rings tethered by a propylene spacer that was functionalized by the incorporation of the hydroxyl group is reported. The complex represents the first example of an iron(II) system with monofunctional tetrazoles possessing the Fe[(tetrazolyl).sub.4][(MeCN).sub.2]-type core and exhibiting a high-spin to low-spin transition.

The electrostatic self-assembly reaction of the [Cu(HL)]2+ cation, where HL = 2-(2-aminoethylamino) ethanol, and the N3− or [Fe(CN)6]4− anion leads to the formation of two coordination polymers with the general formula of [Cu6(μ1,1-N3)6(μ1,3-N3)2(μ1,1,3-N3)2(μ1,1,1,3-N3)2(HL)2]n (1) and {[Cu(HL)]2[Fe(CN)6]·H2O}n (2), respectively. The resulting compounds have been structurally characterized by a single-crystal X-ray diffraction technique. Compound 1 possesses a rare 3D structure. It contains centrosymmetric hexanuclear repeating units, which act as six-connected nodes in the final network and copper(ii) ions are joined together by azide anions with four different types of bridging modes, μ1,1, μ1,1,3, μ1,1,1,3, and μ1,3. The structure of compound 2 is a 2D heterometallic CuII/FeII layer in which the [Cu(HL)]2 nodes and the octahedral [Fe(CN)6]4− linkers are joined by μ2- and unusual μ3-CN bridging modes. Detailed static and dynamic magnetic analyses of 1 reveal a dominant ferromagnetic intracluster interaction and a ferromagnetic 3D ordering transition below Tc = 5 K. The variable temperature magnetic susceptibility measurements of compound 2 show a very weak ferromagnetic coupling between the nearest Cu(ii) ions. Also, EPR spectroscopy of these compounds has been investigated in the solid state. Nanocrystals of compound 2 have also been synthesized by a sonochemical process under different reaction conditions. The results show that the crystallinity degree and uniform distribution of nanosheets are inversely dependent on the irradiation time. [ABSTRACT FROM AUTHOR]

The abrupt high spin (HS)→low spin (LS) transition (T↓1/2=136 K) in [Fe(hbtz)2(CH3CN)2](BF4)2 (hbtz=1,6‐di(tetrazol‐2‐yl)hexane) is finished at 100 K and further thermal treatment influences the spin crossover. Subsequent heating involves a change of the spin state in the same way (T↑1/2=136 K) on cooling. In contrast, cooling below 100 K triggers different behavior and T↑1/2 is shifted to 170 K. The extraordinary structural changes that occurred below 100 K are responsible for the observed diversity of properties. A unique feature of the low‐temperature phase is the rebuilding of the anion network expressed by a shift of anions inside the polymeric layer at a distance of 1.2 Å as well as the relative shift of neighboring layers at over 4 Å. These structural alterations, connected with a phase transition, become the origin of the strain, which in most cases causes crystal cleaving. In a sample composed from crystals crushed as a result of the phase transition or as a result of mechanical crumbling, the hysteresis loop vanishes; however, annealing the sample allows to its partial restoration. A replacement of acetonitrile by other nitriles leads to preservation of the polymeric structure and spin crossover, but no phase transition follows. Spin and phase transitions: Two‐dimensional coordination network [Fe(hbtz)2(CH3CN)3](BF4)2 (hbtz=1,6‐di(tetrazol‐2‐yl)hexane) exhibits a high spin (HS)⇄low spin (LS) transition, which is accompanied by significant structural changes, in particular, involving the shift of neighboring polymeric layers at distances above 4 Å. Occurrence of a structural phase transition as well as hysteresis loop is blocked by crystal cleavage, however, sample annealing restores hysteretic behavior (see scheme). [ABSTRACT FROM AUTHOR]

The abrupt high spin (HS)→low spin (LS) transition (T↓1/2=136 K) in [Fe(hbtz)2(CH3CN)2](BF4)2 (hbtz=1,6‐di(tetrazol‐2‐yl)hexane) is finished at 100 K and further thermal treatment influences the spin crossover. Subsequent heating involves a change of the spin state in the same way (T↑1/2=136 K) on cooling. In contrast, cooling below 100 K triggers different behavior and T↑1/2 is shifted to 170 K. The extraordinary structural changes that occurred below 100 K are responsible for the observed diversity of properties. A unique feature of the low‐temperature phase is the rebuilding of the anion network expressed by a shift of anions inside the polymeric layer at a distance of 1.2 Å as well as the relative shift of neighboring layers at over 4 Å. These structural alterations, connected with a phase transition, become the origin of the strain, which in most cases causes crystal cleaving. In a sample composed from crystals crushed as a result of the phase transition or as a result of mechanical crumbling, the hysteresis loop vanishes; however, annealing the sample allows to its partial restoration. A replacement of acetonitrile by other nitriles leads to preservation of the polymeric structure and spin crossover, but no phase transition follows. Spin and phase transitions: Two‐dimensional coordination network [Fe(hbtz)2(CH3CN)3](BF4)2 (hbtz=1,6‐di(tetrazol‐2‐yl)hexane) exhibits a high spin (HS)⇄low spin (LS) transition, which is accompanied by significant structural changes, in particular, involving the shift of neighboring polymeric layers at distances above 4 Å. Occurrence of a structural phase transition as well as hysteresis loop is blocked by crystal cleavage, however, sample annealing restores hysteretic behavior (see scheme). [ABSTRACT FROM AUTHOR]

A new family of [3 + 3] hexanuclear 3d–4f complexes [(μ3-CO3){CoIILnIIIL(μ3-OH)(OH2)}3]-(ClO4)·mC2H5OH·nH2O (1–5) [Ln = La (1), Gd (2), Tb (3), Dy (4), and Ho (5)] have been prepared in moderate to high yields (62–78%) following a self-assembly reaction between the ligand 6,6′,6′′-(nitrilotris(methylene))tris-(2-methoxy-4-methylphenol) (H3L), Co(OAc)2·4H2O and the lanthanide ion precursors in the mandatory presence of tetrabutylammonium hydroxide. During the reaction, atmospheric carbon dioxide is fixed in the product molecule as a bridging carbonato ligand which connects all the three lanthanide centers of this molecular assembly through a rare η2:η2:η2–μ3 mode of bridging as revealed from X-ray crystallography. The metal centers in all these compounds, except the GdIII analogue (2), are coupled in antiferromagnetic manner while the nature of coupling in the CoII3GdIII3 complex is ferromagnetic. DFT calculations revealed that this ferromagnetic interaction occurs most likely by the CoII–GdIII superexchange, mediated via the bridging oxygen atoms. Only the CoII–DyIII compound (4) displayed a slow relaxation of the magnetization at a very low temperature as established by AC susceptibility measurements. The data provides an estimation of the activation energy U/kB = 9.2 K and the relaxation time constant τ0 = 1.0 × 10−7 s. [ABSTRACT FROM AUTHOR]

The complexes [M(3ditz)3]X2 [X = ClO4-, M = FeII (1), ZnII (2); X = BF4-, M = FeII (3), ZnII (4); 3ditz = 1,3-di(tetrazol-1-yl)propane] were prepared. Disordering of the propylene chain in 3ditz is not affected by thermally induced spin crossover in 1 (T1/2↓ = 149 K, T1/2↑ = 150 K) and 3 (T1/2↓ = 158, T1/2↑ = 161 K). Low-spin to high-spin (LS→HS) switching triggered by laser-light irradiation (520 nm) also does not influence the disordering of the ligand, leading to restoration of the initial HS phase. Pressurization of crystals results in a reduction of the Fe-N distances by about 0.19 Å, which indicates practically complete spin crossover (SCO). Also, in this case, the disordering of the ligand remains unchanged, although thermally and pressure-induced SCO is accompanied by different changes of 3ditz molecules. Upon thermally induced SCO, perturbation resulting from the reduction of the Fe-N distances is accompanied by a slight elongation of the bridging ligand. In contrast, in the range 0.25-0.55 GPa, the pressure-induced SCO is associated with shrinkage of the 3ditz molecule. Further elevation of pressure results in the inversion of structural changes and - similar to temperature-induced spin crossover - a slight elongation of the ligand molecule takes place. [ABSTRACT FROM AUTHOR]

The complexes [M(3ditz)3]X2 [X = ClO4-, M = FeII (1), ZnII (2); X = BF4-, M = FeII (3), ZnII (4); 3ditz = 1,3-di(tetrazol-1-yl)propane] were prepared. Disordering of the propylene chain in 3ditz is not affected by thermally induced spin crossover in 1 (T1/2↓ = 149 K, T1/2↑ = 150 K) and 3 (T1/2↓ = 158, T1/2↑ = 161 K). Low-spin to high-spin (LS→HS) switching triggered by laser-light irradiation (520 nm) also does not influence the disordering of the ligand, leading to restoration of the initial HS phase. Pressurization of crystals results in a reduction of the Fe-N distances by about 0.19 Å, which indicates practically complete spin crossover (SCO). Also, in this case, the disordering of the ligand remains unchanged, although thermally and pressure-induced SCO is accompanied by different changes of 3ditz molecules. Upon thermally induced SCO, perturbation resulting from the reduction of the Fe-N distances is accompanied by a slight elongation of the bridging ligand. In contrast, in the range 0.25-0.55 GPa, the pressure-induced SCO is associated with shrinkage of the 3ditz molecule. Further elevation of pressure results in the inversion of structural changes and - similar to temperature-induced spin crossover - a slight elongation of the ligand molecule takes place. [ABSTRACT FROM AUTHOR]