Search

3D electron diffraction (3D ED)/Micro electron diffraction (MicroED) has extended the limits of crystallography by enabling the determination of three dimensional molecular structures from sub-μm microcrystals. However, 3D ED/microED measurements using current state-of-the-art electron microscopes require experts in both electron microscopy and crystallography making the method rather difficult for researchers who simply need structures. Here, we present a diffractometer specifically designed for 3D ED/microED and show how it works for determining crystal structures. The newly developed electron diffractometer will provide many researchers with an easy path to structure determination of crystals that are less than 1 μm in size. [ABSTRACT FROM AUTHOR]

A tetrameric pentacene, PT, has been used to explore the effects of exciton delocalization on singlet fission (SF). For the first time, triplet decorrelation through intramolecular triplet diffusion was observed following SF. Transient absorption spectroscopy was used to examine different decorrelation mechanisms (triplet diffusion versus structural changes) for PT and its dimeric equivalent PD on the basis of the rate and activation barrier of the decorrelation step. Charge-separation experiments using tetracyano-p-quinodimethane (TCNQ) to quench triplet excitons formed through SF demonstrate that enhanced intersystem crossing, that is, spin catalysis, is a widely underestimated obstacle to quantitative harvesting of the SF products. The importance of spatial separation of the decorrelated triplet states is emphasized, and independent proof that the decorrelated triplet pair state consists of two (T 1 ) states per molecule is provided., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Three novel materials ( 5CzICz , Cz 2 ICz and Cz 3 ICz ), based on the indolo[3,2,1- jk ]carbazole and 9 H -carbazole building blocks, with high triplet energies ( E T > 2.80 eV) and good thermal stability ( T g > 101 °C) were synthesized, characterized and applied as host materials in PhOLED devices. In course of the preparation of the materials, an improved protocol for the synthesis of the indolo[3,2,1- jk ]carbazole moiety has been developed. The careful molecular design of the title compounds allowed to avoid excimer formation of the indolo[3,2,1- jk ]carbazole subunits in thin films. Therefore, the improved molecular design broadened the applicability of indolo[3,2,1- jk ]carbazole host materials and significantly enhanced the efficiency of PhOLED devices based on these derivatives compared to previously reported indolo[3,2,1- jk ]carbazole based compounds. Accordingly, employing the newly developed materials red (CE max : 32.7 cd A -1 , PE max : 31.0 lm W -1 , EQE max : 20.4%), green (CE max : 81.0 cd A -1 , PE max : 87.4 lm W -1 , EQE max : 21.5%) and blue (CE max : 35.5 cd A -1 , PE max : 39.9 lm W -1 , EQE max : 18.0%) PhOLED devices with a remarkably low efficiency roll-off at 1000 cd m -2 ( Cz 2 ICz - red: 5%; green: 0%; blue: 6%) were fabricated.

A unique pressure-induced Cu-N bond breaking/bond forming reaction is reported. The variation of pressure on a single crystal of a one-dimensional copper- (II)-containing coordination polymer (Cu 2 L 2 (1-methylpiperazine) 2 ] n , where H 2 L is 1,1'-(1,3-phenylene)-bis(4,4-dimethylpentane-1,3-dione)), was monitored using single crystal X-ray diffraction with the aid of a diamond anvil cell. At a very low elevated pressure (≈0.05 GPa) a remarkable reversible phase change was observed. The phase change results in the depolymerization of the material through the cleavage and formation of axial Cu-N bonds as well as "ring flips" of individual axially coordinated 1-methylpiperazine ligands. Overall, the pressure-induced phase change is associated with a surprising (and non-intuitive) shift in structure-from a 1-dimensional coordination polymer to a discrete dinuclear complex., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Four new sterically hindered pyridines, L(1)-L(4)-containing amido substituents at the 2-position act as efficient solvent extractants for [CoCl(4)](2-) or [ZnCl(4)](2-) from acidic chloride solutions through protonation of the pyridino N-centre to form the neutral outer-sphere complexes [(LH)(2)MCl(4)]. These ionophores show very high selectivity for chlorometallate anions over chloride ion and are readily stripped to liberate the free-metal chlorides without the formation of inner-sphere complexes [ML(2)Cl(2)]. Single-crystal X-ray structure determinations of [(L(2)H)(2)CoCl(4)] and [(L(2)H)(2)ZnCl(4)] (L(2) = 2-(4,6-di-tert-butylpyridin-2-yl)-N,N'-dihexylmalonamide) coupled with (1)H NMR spectroscopy and DFT calculations on L(2)H(+) and other complexes of [ZnCl(4)](2-) confirm that the pyridinium NH group does not address the outer co-ordination sphere of the metallanion, but rather forms a hydrogen bond to the pendant amide groups and thus pre-organizes the ligand to present both C-H and amido N-H hydrogen-bond donors to the [MCl(4)](2-) ions. The selectivity for chlorometallates over chloride ions shown by this class of extractants arises from their ability to present several polarized C-H units towards the charge-diffuse ions [MCl(4)](2-), whereas the smaller, "harder" chloride anion prefers to be associated with the amido N-H hydrogen-bond donors., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

New examples of nitrogen base adducts of dinuclear Co(II), Ni(II) and Cu(II) complexes of the doubly deprotonated forms of 1,3-aryl linked bis-beta-diketones of type [RC(=O)CH(2)C(=O)C(6)H(4)C(=O)CH(2)C(=O)R] (L(1)H(2)) incorporating the mono- and difunctional amine bases pyridine (Py), 4-ethylpyridine (EtPy), piperidine (pipi), 1,4-piperazine (pip), N-methylmorpholine (mmorph), 1,4-dimethylpiperazine (dmpip) and N,N,N',N'-tetramethylethylenediamine (tmen) have been synthesised by reaction of the previously reported [Cu(2)(L(1))(2)].2.5THF (R = Me), [Cu(2)(L(1))(2)(THF)(2)] (R = t-Bu), [Ni(2)(L(1))(2)(Py)(4)] (R = t-Bu) and [Co(2)(L(1))(2)(Py)(4)] (R = t-Bu) complexes with individual bases of the above type. Comparative X-ray structural studies involving all ten base adduct derivatives have been obtained and reveal a range of interesting discrete and polymeric molecular architectures. The respective products have the following stoichiometries: [Cu(2)(L(1))(2)(Py)(2)].Py (R = Me), [Cu(2)(L(1))(2)(EtPy)(2)].2EtPy (R = t-Bu), [Cu(2)(L(1))(2)(pipi)(2)].2pipi (R = t-Bu), [Cu(2)(L(1))(2)(mmorph)(2)] (R = t-Bu), [Cu(2)(L(1))(2)(tmen)(2)] (R = t-Bu) and {[Cu(2)(L(1))(2)(pip)].pip.2THF}(n), [Co(2)(L(1))(2)(tmen)(2)] (R = t-Bu), [Ni(2)(L(1))(2)(Py)(4)].dmpip (R = t-Bu), [Ni(2)(L(1))(2)(pipi)(4)].pipi (R = t-Bu) and [Ni(2)(L(1))(2)(tmen)(2)] (R = t-Bu). The effect of pressure on the X-ray structure of [Cu(2)(L(1))(2)(mmorph)(2)] has been investigated. An increase in pressure from ambient to 9.1 kbar resulted in modest changes to the unit cell parameters as well as a corresponding decrease of 6.7 percent in the unit cell volume. While a small 'shearing' motion occurs between adjacent molecular units throughout the lattice, no existing bonds are broken or new bonds formed.

The dimethylamine in the adducts [(HNMe(2))B(azolyl)(3)] (azolyl=methimazolyl, pyrazolyl), obtained by reaction of the azole with B(NMe(2))(3), can readily be substituted with a range of nitrogen donors to provide new charge-neutral, tripodal ligands in high yield. This observation has led to a revision of an earlier interpretation of the mechanism of the formation of these species. The donor properties of the ligands [(nmi)B(azolyl)(3)] (nmi=N-methylimidazole) have been compared with their anionic analogues [HB(azolyl)(3)](-) by synthesis of their manganese(I)-tricarbonyl complexes and comparison of their infrared nu(CO) energies. This comparison indicates that the new neutral ligands are only marginally weaker donors than the corresponding anionic hydrotris(azolyl)borate ligands. This may be explained by the ability of the attached nmi ring to stabilize a positive charge remotely from the coordinated metal, which may also account for the fact that the [(nmi)B(pyrazolyl)(3)] ligand is a substantially stronger donor than the similarly neutral tris(pyrazolyl)methane ligand.