Search

Despite demonstrated efficacy of vaccines against severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), the causative agent of coronavirus disease-2019 (COVID-19), widespread hesitancy to vaccination persists. Improved knowledge regarding frequency, severity, and duration of vaccine-associated symptoms may help reduce hesitancy. In this prospective observational study, we studied 1032 healthcare workers who received both doses of the Pfizer-BioNTech SARS-CoV-2 mRNA vaccine and completed post-vaccine symptom surveys both after dose 1 and after dose 2. We defined appreciable post-vaccine symptoms as those of at least moderate severity and lasting at least 2 days. We found that symptoms were more frequent following the second vaccine dose than the first (74% vs. 60%, P 80% of all symptoms resolving within 2 days. The most common symptom was injection site pain, followed by fatigue and malaise. Overall, 20% of participants experienced appreciable symptoms after dose 1 and 30% after dose 2. In multivariable analyses, female sex was associated with greater odds of appreciable symptoms after both dose 1 (OR, 95% CI 1.73, 1.19-2.51) and dose 2 (1.76, 1.28-2.42). Prior COVID-19 was also associated with appreciable symptoms following dose 1, while younger age and history of hypertension were associated with appreciable symptoms after dose 2. We conclude that most post-vaccine symptoms are reportedly mild and last

Enamel is a bioceramic tissue composed of thousands of hydroxyapatite crystallites aligned in parallel within boundaries fabricated by a single ameloblast cell. Enamel is the hardest tissue in the vertebrate body; however, it starts development as a self-organizing assembly of matrix proteins that control crystallite habit. Here, we examine ameloblastin, a protein that is initially distributed uniformly across the cell boundary but redistributes to the lateral margins of the extracellular matrix following secretion thus producing cell-defined boundaries within the matrix and the mineral phase. The yeast two-hybrid assay identified that proteasome subunit α type 3 (Psma3) interacts with ameloblastin. Confocal microscopy confirmed Psma3 co-distribution with ameloblastin at the ameloblast secretory end piece. Co-immunoprecipitation assay of mouse ameloblast cell lysates with either ameloblastin or Psma3 antibody identified each reciprocal protein partner. Protein engineering demonstrated that only the ameloblastin C terminus interacts with Psma3. We show that 20S proteasome digestion of ameloblastin in vitro generates an N-terminal cleavage fragment consistent with the in vivo pattern of ameloblastin distribution. These findings suggest a novel pathway participating in control of protein distribution within the extracellular space that serves to regulate the protein-mineral interactions essential to biomineralization.

The bicarbonate transport activities of Slc26a1, Slc26a6 and Slc26a7 are essential to physiological processes in multiple organs. Although mutations of Slc26a1, Slc26a6 and Slc26a7 have not been linked to any human diseases, disruption of Slc26a1, Slc26a6 or Slc26a7 expression in animals causes severe dysregulation of acid-base balance and disorder of anion homeostasis. Amelogenesis, especially the enamel formation during maturation stage, requires complex pH regulation mechanisms based on ion transport. The disruption of stage-specific ion transporters frequently results in enamel pathosis in animals. Here we present evidence that Slc26a1, Slc26a6 and Slc26a7 are highly expressed in rodent incisor ameloblasts during maturation-stage tooth development. In maturation-stage ameloblasts, Slc26a1, Slc26a6 and Slc26a7 show a similar cellular distribution as the cystic fibrosis transmembrane conductance regulator (Cftr) to the apical region of cytoplasmic membrane, and the distribution of Slc26a7 is also seen in the cytoplasmic/subapical region, presumably on the lysosomal membrane. We have also examined Slc26a1 and Slc26a7 null mice, and although no overt abnormal enamel phenotypes were observed in Slc26a1-/- or Slc26a7-/- animals, absence of Slc26a1 or Slc26a7 results in up-regulation of Cftr, Ca2, Slc4a4, Slc4a9 and Slc26a9, all of which are involved in pH homeostasis, indicating that this might be a compensatory mechanism used by ameloblasts cells in the absence of Slc26 genes. Together, our data show that Slc26a1, Slc26a6 and Slc26a7 are novel participants in the extracellular transport of bicarbonate during enamel maturation, and that their functional roles may be achieved by forming interaction units with Cftr.

Concurrent chemoradiotherapy (CCRT) has become the standard of care for patients with unresectable stage III non-small cell lung cancer (NSCLC). The comparative merits of two widely used regimens: carboplatin/paclitaxel (PC) and cisplatin/etoposide (PE), each with concurrent radiotherapy, remain largely undefined. Records for consecutive patients with stage III NSCLC treated with PC or PE and ≥60 Gy chest radiotherapy between 2000 and 2011 were reviewed for outcomes and toxicity. Survival was estimated using the Kaplan-Meier method and Cox modeling with the Wald test. Comparison across groups was done using the student's t and chi-squared tests. Seventy-five (PC: 44, PE: 31) patients were analyzed. PC patients were older (median 71 vs. 63 years; P = 0.0006). Other characteristics were comparable between groups. With PE, there was significantly increased grade ≥3 neutropenia (39% vs. 14%, P = 0.024) and thrombocytopenia (10% vs. 0%, P = 0.039). Radiation pneumonitis was more common with PC (66% vs. 38%, P = 0.033). Five treatment-related deaths occurred (PC: 3 vs. PE: 2, P = 1.000). With a median follow-up of 51.6 months, there were no significant differences in relapse-free survival (median PC 12.0 vs. PE 11.5 months, P = 0.700) or overall survival (median PC 20.7 vs. PE 13.7 months; P = 0.989). In multivariate analyses, no factors predicted for improved survival for either regimen. PC was more likely to be used in elderly patients. Despite this, PC resulted in significantly less hematological toxicity but achieved similar survival outcomes as PE. PC is an acceptable CCRT regimen, especially in older patients with multiple comorbidities.

IntroductionRoot canal treatment (RCT) success criteria inform us of the path to bony healing and of prognostic factors, but tell little about how the patient perceives, feels, or values RCT. Patients choose, undergo, and pay for RCT, they live with the result, and inform their community. The purpose of this narrative review was to appraise patient-centered outcomes of initial non-surgical RCT and nonsurgical retreatment, in adults.Materials and methodsPatient-centered RCT outcome themes were identified in the extant literature: quality of life, satisfaction, anxiety, fear, pain, tooth survival and cost. Narrative review was applied because the disparate themes and data were unsuited to systematic review or meta-analysis.ResultsApplication of the Oral Health Impact Profile (OHIP) demonstrated that disease of pulpal origin affects quality of life with moderate severity, primarily through physical pain and psychological discomfort, and that RCT results in broad improvement of quality of life. Satisfaction with RCT is extremely high, but cost is the primary reason for dissatisfaction. Anxiety and fear affect RCT patients, profoundly influencing their behaviors, including treatment avoidance, and their pain experience. Fear of pain is "fair" to "very much" prior to RCT. Pain is widely feared, disliked, and remembered; however, disease of pulpal origin generally produces moderate, but not severe pain. RCT causes a dramatic decrease in pain prevalence and severity over the week following treatment. Survival rates of teeth after RCT are very high; complication rates are low. Cost is a barrier to RCT, but initial costs, lifetime costs, cost effectiveness, cost utility, and cost benefit all compare extremely well to the alternatives involving replacement using implants or fixed prostheses.ConclusionDentists must strive to reduce anxiety, fear, experienced and remembered pain, and to accurately inform and educate their patients with respect to technical, practical and psychosocial aspects of RCT.

BackgroundCancer-Testis Antigens (CTAs) are immunogenic proteins that are poor prognostic markers in non-small cell lung cancer (NSCLC). We investigated expression of CTAs in NSCLC and their association with response to chemotherapy, genetic mutations and survival.MethodsWe studied 199 patients with pathological N2 NSCLC treated with neoadjuvant chemotherapy (NAC; n = 94), post-operative observation (n = 49), adjuvant chemotherapy (n = 47) or unknown (n = 9). Immunohistochemistry for NY-ESO-1, MAGE-A and MAGE-C1 was performed. Clinicopathological features, response to neoadjuvant treatment and overall survival were correlated. DNA mutations were characterized using the Sequenom Oncocarta panel v1.0. Affymetrix data from the JBR.10 adjuvant chemotherapy study were obtained from a public repository, normalised and mapped for CTAs.ResultsNY-ESO-1 was expressed in 50/199 (25%) samples. Expression of NY-ESO-1 in the NAC cohort was associated with significantly increased response rates (P = 0.03), but not overall survival. In the post-operative cohort, multivariate analyses identified NY-ESO-1 as an independent poor prognostic marker for those not treated with chemotherapy (HR 2.61, 95% CI 1.28-5.33; P = 0.008), whereas treatment with chemotherapy and expression of NY-ESO-1 was an independent predictor of improved survival (HR 0.267, 95% CI 0.07-0.980; P = 0.046). Similar findings for MAGE-A were seen, but did not meet statistical significance. Independent gene expression data from the JBR.10 dataset support these findings but were underpowered to demonstrate significant differences. There was no association between oncogenic mutations and CTA expression.ConclusionsNY-ESO-1 was predictive of increased response to neoadjuvant chemotherapy and benefit from adjuvant chemotherapy. Further studies investigating the relationship between these findings and immune mechanisms are warranted.

We have previously identified amelotin (AMTN) as a novel protein expressed predominantly during the late stages of dental enamel formation, but its role during amelogenesis remains to be determined. In this study we generated transgenic mice that produce AMTN under the amelogenin (Amel) gene promoter to study the effect of AMTN overexpression on enamel formation in vivo. The specific overexpression of AMTN in secretory stage ameloblasts was confirmed by Western blot and immunohistochemistry. The gross histological appearance of ameloblasts or supporting cellular structures as well as the expression of the enamel proteins amelogenin (AMEL) and ameloblastin (AMBN) was not altered by AMTN overexpression, suggesting that protein production, processing and secretion occurred normally in transgenic mice. The expression of Odontogenic, Ameloblast-Associated (ODAM) was slightly increased in secretory stage ameloblasts of transgenic animals. The enamel in AMTN-overexpressing mice was much thinner and displayed a highly irregular surface structure compared to wild type littermates. Teeth of transgenic animals underwent rapid attrition due to the brittleness of the enamel layer. The microstructure of enamel, normally a highly ordered arrangement of hydroxyapatite crystals, was completely disorganized. Tomes' process, the hallmark of secretory stage ameloblasts, did not form in transgenic mice. Collectively our data demonstrate that the overexpression of amelotin has a profound effect on enamel structure by disrupting the formation of Tomes' process and the orderly growth of enamel prisms.

Newly developed translucent zirconia materials have been used for anterior monolithic complete coverage restorations. Surface treatments can improve adhesion, as well as decrease or increase the strength of ceramics. However, information on the influence of surface treatments on the strength of translucent zirconias is sparse. The purpose of this in vitro study was to measure and characterize the effects of different surface treatments, including airborne-particle abrasion, on the strength of different translucent 4 mol% and 5 mol% yttria-stabilized zirconia materials. Disks (N=160) made from 4 types of translucent yttria-stabilized zirconia materials were surface-treated in 4 ways: Control groups were hand-polished with 2000-grit silicon carbide abrasive paper; as-machined; glass bead airborne-particle abraded; and alumina airborne-particle abraded. The biaxial flexural strength was measured by using a piston-on-3-ball test in a universal testing machine. The simple main effects of material type and surface treatment and their interaction on biaxial flexural strength were evaluated with 2-way ANOVA (α=.05). A priori, 1-way ANOVA and the Tukey multiple comparisons tests were used within material and treatment types (α=.05). Surface morphology was assessed by using scanning electron microscopy. Translucency, absolute transmittance, was measured by using a spectrophotometer. Two-way ANOVA revealed that the effects of zirconia type, surface treatment, and their interaction all significantly affected biaxial flexural strength (P <.001). One-way ANOVA revealed that the 4Y material was stronger than all 5Y materials, regardless of surface treatment; all 5Y materials were ranked from strongest to weakest as polished; as-machined, or glass bead abraded; and alumina abraded. The 4Y material was stronger when alumina abraded than when glass bead abraded. Scanning electron microscopy showed that as-polished surfaces were smoother than all others; as-machined and glass bead abraded surfaces displayed little difference; alumina abraded was the roughest; and differences among materials were not discerned. The 1-way ANOVA and multiple comparisons testing showed that the 4Y material had less absolute transmittance, approximately 5% less, than all the 5Y materials. Zirconia material type and surface treatment influenced the strength of translucent zirconia materials; a 4 mol% zirconia material was stronger than 5 mol% zirconia materials for all surface treatments tested; airborne-particle abrasion using alumina had a slight strengthening effect on a 4 mol% zirconia but had a weakening effect on 5 mol% materials; airborne-particle abrasion by using alumina produced the roughest surfaces on all materials; and the 4 mol% material was slightly less translucent than the 5 mol% materials. [ABSTRACT FROM AUTHOR]

This article explores the best practices according to recent literature for recruitment and retention/support of Latino/a students at postsecondary institutions in the United States. The authors seek to provide a simple framework for the cultivation of a campus climate that is welcoming to all varieties of student populations.

Focuses on the history of slavery in the northern United States during the eighteenth century. Addresses the life of African Americans within the U.S. Explores issues, such as the murder of a slave holder, the Negro Election Day, and Pinkster. (CMK)

Pesticides, including insecticides and fungicides, are major contaminants in the effluent from intensive agricultural systems, such as greenhouses. Because of their constant use and persistence, some pesticides can accumulate in soil and/or run off into adjacent waterways. Microbial communities in soil can degrade some pesticides, and bioreactors with enhanced microbial communities have the potential to facilitate decontamination before the effluent is released into the environment. In this study, we sampled the soil along a gradient from immediately below greenhouses, into, through and below a bioreactor. Multi-analyte pesticide screening was undertaken along with shotgun metagenomic sequencing, to assess microbial community taxonomic profiles and metabolic pathway responses for functional analysis. Two insecticides (imidacloprid and fipronil) and nine fungicides were identified in the soil samples, with a general decrease in most pesticides with increasing distance from the greenhouses. Diversity indexes of taxonomic profiles show changes in the microbial community along the gradient. In particular, microbial communities were significantly different in the bioreactor, with lower Shannon diversity compared to immediately below the greenhouses, in the channels leading into the bioreactor and further downstream. Metabolic pathway analysis revealed significant changes in a wide range of core housekeeping genes such as protein/amino acid synthesis and lipid/fatty acid biosynthesis among the sampling sites. The result demonstrates that the composition and potential functional pathways of the microbial community shifted towards an increased tendency for phytol and contaminant degradation in the bioreactor, facilitated by high organic matter content. This highlights the potential to use enhanced microbial communities within bioreactors to reduce contamination by some pesticides in sediment receiving run-off from greenhouses. [Display omitted] • Enhanced microbial communities in bioreactors can be used to degrade pesticides. • Nine fungicides and two insecticides were detected in soil below greenhouses. • Pesticides decreased along a gradient into and below the bioreactor. • The bioreactor had a distinct microbial community with different metabolic activity. • Metabolic pathway analysis indicated some capacity for microbial degradation of pesticides. [ABSTRACT FROM AUTHOR]

Natural teeth are graded in terms of translucency and strength. Graded zirconia materials are now available with a higher yttria content on the top or in the enamel zone to increase surface translucency and a lower yttria content on the bottom or in the dentin zone to increase strength. Such materials could provide multiple advantages over uniform materials and reduce the need for porcelain veneering in anterior artificial crowns; however, studies on the properties of these materials are lacking. The purpose of this in vitro study was to measure and compare the biaxial flexural strength, percentage light transmission, elemental content, and phase content of zones within and among color graded zirconia blocks and color- and strength-graded zirconia blocks. Disks of a color graded material (Katana STML) and a strength- and color-graded material (IPS e.max ZirCAD Prime) were fabricated (Zircom Furnace). Biaxial flexural strength was measured using a piston-on-3-ball test in a universal testing machine (n=10). Absolute light transmission was measured with a spectrophotometer. Elemental compositions were quantified for 3 zones in each of the 2 zirconia materials using X-ray fluorescence analysis. Zirconia phase fractions were quantified for 3 zones using X-ray diffraction analysis (XRD). Where appropriate, 2-way ANOVA, 1-way ANOVA, and Tukey multiple pairwise comparison testing were used to determine which of the 6 zones differed from one another (α=.05). The color-graded zirconia exhibited gradients in light transmission and differences in phase content in the 3 zones measured. The color- and strength-graded zirconia exhibited gradients in light transmission, biaxial flexural strength, elemental composition, and phase content in the 3 zones measured. The bottom, dentin, or intaglio layer of a strength graded zirconia material was substantially stronger than all other zones of either material (P <.05). The top, enamel, zones of both materials possessed high light transmissibility (P <.05). The 2 materials differed with respect to biaxial strength (P <.001), light transmission (P <.02), elemental composition, and phase composition overall, as well as in most zone-by zone comparisons (P <.05). The performance and composition of the color graded material was consistent with it being a 5Y material throughout. The performance and composition of the color and strength graded material was consistent with it having a 3Y bottom zone and a 5Y top zone. A strength-graded and color-graded zirconia material offers potential advantages in both strength and translucency. [ABSTRACT FROM AUTHOR]

Abstract Introduction Vasculitis has been associated with malignancies, more commonly hematological rather than solid malignancies. Due to the rarity of these conditions and the lack of a temporal association, the relationship between vasculitis and malignancy remains unclear. Paraneoplastic vasculitis as a phenomenon of lung cancer has been described in the literature. To the best of our knowledge, this is the first case report of leukocytoclastic vasculitis being an initial presentation of malignant pleural mesothelioma. Case presentation We report the case of an 84-year old Greek man who presented to our facility with an erythematous, pruritic and purpuric rash affecting his limbs. This was biopsy-proven to be leukocytoclastic vasculitis and treated conservatively with topical corticosteroids as well as oral prednisolone, with good results. Six months later, he was diagnosed as having malignant pleural mesothelioma. As he remained asymptomatic from his malignancy, no systemic chemotherapy was instituted. He had a recurrence of biopsy-proven leukocytoclastic vasculitis two months after he was diagnosed as having mesothelioma, which again settled with conservative measures. Conclusions It is important to remain vigilant with regard to the association between leukocytoclastic vasculitis and malignancies. A diagnosis of vasculitis requires a search for malignancies as well as other possible etiologies. This is particularly of relevance when the vasculitis becomes chronic, recurrent or treatment is no longer effective. Should our patient have experienced refractory vasculitis, we would have instituted systemic chemotherapy to treat the underlying malignancy.

Porcelain fused to zirconia prostheses are widely used, but porcelain chipping, fracture, spalling and delamination are common clinical problems. Conventional bond strength testing is inherently unsuited for studying interfacial failure by cracking in brittle materials. Instead, fracture toughness is a more meaningful parameter because it can assess the robustness of the interface when subjected to loading, but fracture mechanics approaches have only rarely been used. Our purpose was to develop a novel, simple, 3-point flexural methodology and mathematical analysis to measure the fracture toughness of the porcelain to zirconia interface. Equations were derived to estimate the fracture toughness of the bond by computing the interfacial energy release rate for a novel simple 3-point flexural test model. The test was validated using two different configurations of layered zirconia/porcelain beams (n = 10), approximating the dimensions of a fixed dental prosthesis, fabricated from a tetragonal polycrystalline zirconium dioxide partially stabilized with yttria and a feldspathic dental porcelain. Cracking along the bimaterial interface was produced and measured as a discrete event. Fracture toughness means (standard deviations) computed from the measured energy release rate, for the porcelain to zirconia interface in two different specimen configurations were 7.9 (1.3) and 5.3 (1.6) J/m2. Equations were derived to measure interfacial fracture toughness of brittle materials using a novel simple 3-point flexural test method. The test was then validated; estimates for the fracture toughness for the porcelain to zirconia bond, overlapped with previously published data derived from more complex 4-point notched tests. [ABSTRACT FROM AUTHOR]

Caribou (Rangifer tarandus) populations are sympatric with Cougars (Puma concolor) in only a few areas, primarily in western Canada. Records of Cougar-Caribou interactions are limited and no published accounts describe Cougar predation on the shallow-snow, terrestrial-lichen-eating Northern Mountain Caribou (Rangifer tarandus caribou), referred to as Designatable Unit (DU) 7 by the Committee on the Status of Endangered Wildlife in Canada. In 2018 and 2019, two incidents of confirmed Cougar predation on radio-collared Caribou were documented in the declining Itcha-Ilgachuz subpopulation in west-central British Columbia. To the best of our knowledge, this is the first published record of Cougar predation on DU7 Northern Mountain Caribou. Increased landscape disturbance and climate change may be increasing apparent competition between deer (Odocoileus spp.), feral Horses (Equus ferus caballus), and Caribou, leading to Cougar predation in areas of Caribou range where it previously has not been documented. Cougar predation may become a conservation concern, as declining Caribou herds are susceptible to any increased predation pressure. [ABSTRACT FROM AUTHOR]

Intertidal wetlands can sequester pollutants along estuarine conduits. Here we test the effectiveness of a mangrove-dominated estuary in removing dissolved nitrogen during a rain event. We intensively and simultaneously sampled surface water nutrients upstream and downstream of an estuary before, during and after a 63 mm rain event in Coffs Creek (Australia). NO x was the main form of dissolved nitrogen upstream of the estuary (∼60%), while dissolved organic nitrogen (DON) was an important form at the downstream station (∼46%) during observations. High NO x attenuation (71%) occurred during the rain event when the loads reached 31 μmol m−2 catchment area day−1. In contrast, the estuary was found to be a source of NH 4 + (∼5 μmol m−2 catchment area day−1). This implies a moderate conversion of upstream NO x into NH 4 + and DON along the transport pathway, likely due to tidally-driven pore water exchange within the anoxic estuarine mangrove sediments. Overall, the mangrove-lined estuary attenuated upstream total dissolved nitrogen loads, maintaining water quality and minimizing exports to the coastal ocean even during high flow conditions. Image 10174 • Mangroves removed 71% of NOx exports to the coastal ocean even during high flow conditions. • Small fraction of the catchment nitrate load was transformed to dissolved organic nitrogen and ammonium within mangroves. [ABSTRACT FROM AUTHOR]

Metallic ferromagnets with ultra-low damping are highly desirable for charge-based spintronic applications. Here, we systematically investigate the magnetic dynamics of Co25Fe75 epitaxial films with a Gilbert damping constant as low as 7.1 × 10−4. The in-plane angular dependence of ferromagnetic resonance (FMR) was measured on various thicknesses of Co25Fe75 films grown on MgO and MgAl2O4, from which the mechanisms for FMR linewidth broadening can be distinguished and quantified. The thickness dependencies of the magnetic anisotropy and inhomogeneous broadening of the linewidth are good indicators of crystal quality and magnetic uniformity. Additionally, it is shown that anisotropic two-magnon scattering is induced by defects at the surfaces. [ABSTRACT FROM AUTHOR]

Abstract Nitrogen runoff from fertiliser intensive land uses has become an issue worldwide, contributing to algal blooms, hypoxic waters and aquatic biodiversity losses. This study assessed potential nutrient pollution from blueberry farms in subtropical Australia and examines whether nutrient loads were driven by groundwater discharge and/or surface water runoff. Streams downstream of eight blueberry farms were compared to eight nearby control sites without any blueberry activity. In the 90 day sample period, there were three rain events >90 mm day−1 that produced runoff sufficient to create flooding. Overall, the results revealed a clear link between blueberry farming and nitrogen runoff in headwater streams. While NO X (nitrate + nitrite) was the dominant nitrogen species downstream of blueberry farms, dissolved organic nitrogen (DON) was the dominant species in control sites. The concentrations and loads of NO x were one order of magnitude lower in the eight non-blueberry (6.3 ± 2.0 μmol L−1; 1.6 ± 1.2 kg N-NO X ha−1 yr−1) than the eight blueberry (56.9 ± 14.2 μmol L−1; 21.8 ± 8.0 kg N-NO X ha−1 yr−1) sites. NO X concentrations and loads were highest following rain events. Radon (222Rn, a natural groundwater tracer) observations and low nitrogen concentration in groundwater samples further suggest that surface runoff dominates the delivery of nitrogen to the creeks investigated. NO X concentrations and loads in creeks correlated with blueberry farm density. At >15% of blueberry land use in a catchment, there was a detectable influence in NO X concentrations and loads in the headwater streams. Assuming that our load estimates can be up-scaled to annual nitrogen creek exports, and that local farmers use the recommended amount of fertiliser (121 kg N ha−1 yr−1), between 18 and 25% of the used fertiliser was lost to the creeks. This implies that there are opportunities for decreasing the use of fertilisers in this catchment and managing any nitrogen that escapes to the creeks. Graphical abstract Image 1 Highlights • Blueberry farm area was correlated with nitrogen runoff in headwater streams. • About 20% of nitrogen fertilisers used in blueberry farms were lost to creeks. • When covering >15% of the landscape, blueberry farms dominated nitrogen runoff. • Nitrate values and loads were one order of magnitude greater in blueberry creeks. • Groundwater seepage traced by radon was not a major source of nitrogen. This study reveals a clear link between blueberry farming and nitrogen runoff in headwater streams in subtropical Australia. About 20% of the fertiliser used on blueberry farms was lost to creeks. At >15% of a catchment land use, blueberry farms became the dominant land use nitrogen contributor. [ABSTRACT FROM AUTHOR]

Statement of problem Bonded porcelain veneers are widely used esthetic restorations. High success and survival rates have been reported, but failures do occur. Fractures are the commonest failure mode. Minimally invasive or thin veneers have gained popularity. Increased enamel and porcelain thickness improve the strength of veneers bonded to enamel, but less is known about dentin or mixed substrates. Purpose The purpose of this in vitro study was to measure the influences of tooth substrate type (all-enamel, all-dentin, or half-dentin-half-enamel) and veneer thickness on the loads needed to cause initial and catastrophic porcelain veneer failure. Material and methods Model discoid porcelain veneer specimens of varying thicknesses were bonded to the flattened facial surfaces of incisors with different enamel and dentin tooth substrates, artificially aged, and loaded to failure with a small sphere. Initial and catastrophic fracture events were identified and analyzed statistically and fractographically. Results Fracture events included initial Hertzian cracks, intermediate radial cracks, and catastrophic gross failure. All specimens retained some porcelain after catastrophic failure. Cement failure occurred at the cement–porcelain interface not at the cement–tooth interface. Porcelain veneers bonded to enamel were substantially stronger and more damage-tolerant than those bonded to dentin or mixed substrates. Increased porcelain thickness substantially raised the loads to catastrophic failure on enamel substrates but only moderately raised the loads to catastrophic failure on dentin or mixed substrates. The veneers bonded to half-dentin-half-enamel behaved remarkably like those bonded wholly to dentin. Conclusions Porcelain veneers bonded to enamel were substantially stronger and more damage-tolerant than those bonded to dentin or half-enamel-half dentin. [ABSTRACT FROM AUTHOR]

Low-damping magnetic materials have been widely used in microwave and spintronic applications because of their low energy loss and high sensitivity. While the Gilbert damping constant can reach 10-4 to 10-5 in some insulating ferromagnets, metallic ferromagnets generally have larger damping due to magnon scattering by conduction electrons. Meanwhile, low-damping metallic ferromagnets are desired for charge-based spintronic devices. Here, we report the growth of Co25Fe75 epitaxial films with excellent crystalline quality evident by the clear Laue oscillations and exceptionally narrow rocking curve in the X-ray diffraction scans as well as from scanning transmission electron microscopy. Remarkably, the Co25Fe75 epitaxial films exhibit a damping constant <1.4 × 10-3, which is comparable to the values for some high-quality Y3Fe5O12 films. This record low damping for metallic ferromagnets offers new opportunities for charge-based applications such as spin-transfer-torque-induced switching and magnetic oscillations. [ABSTRACT FROM AUTHOR]