Search

This work explores power handling solutions for high-field, highly-radiative negative triangularity (NT) reactors based around the MANTA concept \cite{rutherford_manta_2024}. The divertor design is kept as simple as possible, opting for a standard divertor with standard leg length. FreeGS is used to create an equilibrium for the boundary region, prioritizing a short outer leg length of only $\sim$50 cm ($\sim$40\% of the minor radius). The UEDGE code package is used for the boundary plasma solution, to track plasma temperatures and fluxes to the divertor targets. It is found that for $P_\mathrm{SOL}$ = 25 MW and $n_\mathrm{sep} = 0.96 \times 10^{20}$ m$^{-3}$, conditions consistent with initial core transport modeling, little additional power mitigation is necessary. For external impurity injection of just 0.13\% Ne, the peak heat flux density at the more heavily loaded outer targets falls to 7.8 MW/m$^{2}$, while the electron temperature $T_\mathrm{e}$ remains just under 5 eV. Scans around the parameter space reveal that even at densities lower than in the primary operating scenario, $P_\mathrm{SOL}$ can be increased up to 50 MW, so long as a slightly higher fraction of extrinsic radiator is used. With less than 1\% neon (Ne) impurity content, the divertor still experiences less than 10 MW/m$^{2}$ at the outer target. Design of the plasma-facing components includes a close-fitting vacuum vessel with a tungsten inner surface as well as FLiBe-carrying cooling channels fashioned into the VV wall directly behind the divertor targets. For the seeded heat flux profile, Ansys Fluent heat transfer simulations estimate that the outer target temperature remains at just below 1550\degree C. Initial scoping of advanced divertor designs shows that for an X-divertor, detachment of the outer target becomes much simpler, and plasma fluxes to the targets drop considerably with only 0.01\% Ne content.

Experimental measurements of plasma and neutral profiles across the pedestal are used in conjunction with 2D edge modeling to examine pedestal stiffness in Alcator C-Mod H-mode plasmas. Experiments on Alcator C-Mod observed pedestal degradation and loss in confinement below a critical value of net power crossing the separatrix, $P_\mathrm{net} = P_\mathrm{net}^\mathrm{crit} \approx 2.3$ MW. New analysis of ionization and particle flux profiles reveal saturation of the pedestal electron density, $n_{e}^\mathrm{ped}$ despite continuous increases in ionization throughout the pedestal, inversely related to $P_\mathrm{net}$. A limit to the pedestal $\nabla n_{e}$ emerges as the particle flux, $\Gamma_{D}$ continues to grow, implying increases in the effective particle diffusivity, $D_\mathrm{eff}$. This is well-correlated with the separatrix collisionality, $\nu^{*}_\mathrm{sep}$ and a turbulence control parameter, $\alpha_{t}$, implying a possible transition in type of turbulence. The transition is well correlated with the experimentally observed value of $P_\mathrm{net}^\mathrm{crit}$. SOLPS-ITER modeling is performed for select discharges from the power scan, constrained with experimental electron and neutral densities, measured at the outer midplane. The modeling confirms general growth in $D_\mathrm{eff}$, consistent with experimental findings, and additionally suggests even larger growth in $\chi_{e}$ at the same $P_\mathrm{net}^\mathrm{crit}$.

At the high $n_{e}$ proposed for high-field fusion reactors, it is uncertain whether ionization, as opposed to plasma transport, will be most influential in determining $n_{e}$ at the pedestal and separatrix. A database of Alcator C-Mod discharges is analyzed to evaluate the impact of source modification via cryopumping. The database contains similarly-shaped H-modes at fixed $I_{p} =$ 0.8 MA and $B_{t} =$ 5.4 T, spanning a large range in $P_\mathrm{net}$ and ionization. Measurements from an edge Thomson Scattering system are combined with those from a midplane-viewing Ly$_{\alpha}$ camera to evaluate changes to $n_{e}$ and $T_{e}$ in response to changes to ionization rates, $S_\mathrm{ion}$. $n_{e}^\mathrm{sep}$ and $T_{e}^\mathrm{ped}$ are found to be most sensitive to changes to $S_\mathrm{ion}^\mathrm{sep}$, as opposed to $n_{e}^\mathrm{ped}$ and $T_{e}^\mathrm{sep}$. Dimensionless quantities, namely $\alpha_\mathrm{MHD}$ and $\nu^{*}$, are found to regulate attainable pedestal values. Select discharges at different values of $P_\mathrm{net}$ and in different pumping configurations are analyzed further using SOLPS-ITER. It is determined that changes to plasma transport coefficients are required to self-consistently model both plasma and neutral edge dynamics. Pumping is found to modify the poloidal distribution of atomic neutral density, $n_{0}$, along the separatrix, increasing $n_{0}$ at the active X-point. Opaqueness to neutrals from high $n_{e}$ in the divertor is found to play a role in mediating neutral penetration lengths and hence, the poloidal distribution of neutrals along the separatrix. Pumped discharges thus require a larger particle diffusion coefficient than that inferred purely from 1D experimental profiles at the outer midplane.

The MANTA (Modular Adjustable Negative Triangularity ARC-class) design study investigated how negative-triangularity (NT) may be leveraged in a compact, fusion pilot plant (FPP) to take a ``power-handling first" approach. The result is a pulsed, radiative, ELM-free tokamak that satisfies and exceeds the FPP requirements described in the 2021 National Academies of Sciences, Engineering, and Medicine report ``Bringing Fusion to the U.S. Grid". A self-consistent integrated modeling workflow predicts a fusion power of 450 MW and a plasma gain of 11.5 with only 23.5 MW of power to the scrape-off layer (SOL). This low $P_\text{SOL}$ together with impurity seeding and high density at the separatrix results in a peak heat flux of just 2.8 MW/m$^{2}$. MANTA's high aspect ratio provides space for a large central solenoid (CS), resulting in ${\sim}$15 minute inductive pulses. In spite of the high B fields on the CS and the other REBCO-based magnets, the electromagnetic stresses remain below structural and critical current density limits. Iterative optimization of neutron shielding and tritium breeding blanket yield tritium self-sufficiency with a breeding ratio of 1.15, a blanket power multiplication factor of 1.11, toroidal field coil lifetimes of $3100 \pm 400$ MW-yr, and poloidal field coil lifetimes of at least $890 \pm 40$ MW-yr. Following balance of plant modeling, MANTA is projected to generate 90 MW of net electricity at an electricity gain factor of ${\sim}2.4$. Systems-level economic analysis estimates an overnight cost of US\$3.4 billion, meeting the NASEM FPP requirement that this first-of-a-kind be less than US\$5 billion. The toroidal field coil cost and replacement time are the most critical upfront and lifetime cost drivers, respectively.

PARS (Plasma Acceleration Research Station) is an electron beam driven plasma wakefield acceleration test stand proposed for VELA/CLARA facility in Daresbury Laboratory. In order to optimise various operational configurations, 2D numerical studies were performed by using VSIM for a range of parameters such as bunch length, radius, plasma density and positioning of the bunches with respect to each other for the two-beam acceleration scheme. In this paper, some of these numerical studies and considered measurement methods are presented., Comment: Presented in IPAC2015