Search

The coexistence of acidic and basic O and N sites were functionalized via amination to characterize the samples of vapor grown carbon nanofibers (VGCNFs) modified by treatment of the oxidized CNFs with N[H.sub.3]. The results revealed the potential application of the N-containing nanocarbon materials obtained via amination in catalysis as well as electronic device materials.

TiO2-, Al2O3-, and ZrO2-supported CeO2 catalysts with different Ce loadings were prepared by wet impregnation of the carriers with an acidified solution of cerium ammonium nitrate. The calcined catalysts were characterized by bulk and surface-sensitive techniques, which included microcalorimetry, and evaluated in the three-phase hydrogenation of alkynes under continuous-flow conditions at variable temperature (293-413 K) and pressure (1-90 bar). A number of acetylenic compounds, which contain terminal or internal triple bonds, conjugated unsaturations, and additional functionalities, were systematically assessed. The results revealed the full stereo- and chemoselective character of the ceria catalysts, which outperform the well-known Lindlar catalyst, and open promising perspectives for the revolutionary use of a cost-effective oxide for the production of olefinic compounds in the vitamin and fine chemical industries. [ABSTRACT FROM AUTHOR]

This work aims to clarify the nanostructural transformation accompanying the loss of activity and selectivity for the hydrogen peroxide synthesis of palladium and gold-palladium nanoparticles supported on N-functionalized carbon nanotubes. High-resolution X-ray photoemission spectroscopy (XPS) allows the discrimination of metallic palladium, electronically modified metallic palladium hosting impurities, and cationic palladium. This is paralleled by the morphological heterogeneity observed by high-resolution TEM, in which nanoparticles with an average size of 2 nm coexisted with very small palladium clusters. The morphological distribution of palladium is modified after reaction through sintering and dissolution/redeposition pathways. The loss of selectivity is correlated to the extent to which these processes occur as a result of the instability of the particle at the carbon surface. We assign beneficial activity in the selective hydrogenation of oxygen to palladium clusters with a modified electronic structure compared with palladium metal or palladium oxides. These beneficial species are formed and stabilized on carbons modified with nitrogen atoms in substitutional positions. The formation of larger metallic palladium particles not only reduces the number of active sites for the synthesis, but also enhances the activity for deep hydrogenation to water. The structural instability of the active species is thus detrimental in a dual way. Minimizing the chance of sintering of palladium clusters by all means is thus the key to better performing catalysts. [ABSTRACT FROM AUTHOR]

We report on the activation of CO 2 on Ni single-atom catalysts. These catalysts were synthesized using a solid solution approach by controlled substitution of 1-10 atom % of Mg 2+ by Ni 2+ inside the MgO structure. The Ni atoms are preferentially located on the surface of the MgO and, as predicted by hybrid-functional calculations, favor low-coordinated sites. The isolated Ni atoms are active for CO 2 conversion through the reverse water-gas shift (rWGS) but are unable to conduct its further hydrogenation to CH 4 (or MeOH), for which Ni clusters are needed. The CO formation rates correlate linearly with the concentration of Ni on the surface evidenced by XPS and microcalorimetry. The calculations show that the substitution of Mg atoms by Ni atoms on the surface of the oxide structure reduces the strength of the CO 2 binding at low-coordinated sites and also promotes H 2 dissociation. Astonishingly, the single-atom catalysts stayed stable over 100 h on stream, after which no clusters or particle formation could be detected. Upon catalysis, a surface carbonate adsorbate-layer was formed, of which the decompositions appear to be directly linked to the aggregation of Ni. This study on atomically dispersed Ni species brings new fundamental understanding of Ni active sites for reactions involving CO 2 and clearly evidence the limits of single-atom catalysis for complex reactions.

This work aims to clarify the nanostructural transformation accompanying the loss of activity and selectivity for the hydrogen peroxide synthesis of palladium and gold-palladium nanoparticles supported on N-functionalized carbon nanotubes. High-resolution X-ray photoemission spectroscopy (XPS) allows the discrimination of metallic palladium, electronically modified metallic palladium hosting impurities, and cationic palladium. This is paralleled by the morphological heterogeneity observed by high-resolution TEM, in which nanoparticles with an average size of 2 nm coexisted with very small palladium clusters. The morphological distribution of palladium is modified after reaction through sintering and dissolution/redeposition pathways. The loss of selectivity is correlated to the extent to which these processes occur as a result of the instability of the particle at the carbon surface. We assign beneficial activity in the selective hydrogenation of oxygen to palladium clusters with a modified electronic structure compared with palladium metal or palladium oxides. These beneficial species are formed and stabilized on carbons modified with nitrogen atoms in substitutional positions. The formation of larger metallic palladium particles not only reduces the number of active sites for the synthesis, but also enhances the activity for deep hydrogenation to water. The structural instability of the active species is thus detrimental in a dual way. Minimizing the chance of sintering of palladium clusters by all means is thus the key to better performing catalysts., (Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Fe oxide nanoparticles show enhanced electrocatalytic performance in the reduction of CO(2) to isopropanol when deposited on an N-functionalized carbon nanotube (CNT) support rather than on a pristine or oxidized CNT support. XRD and high-resolution TEM were used to investigate the nanostructure of the electrocatalysts, and CO(2) adsorptive microcalorimetry was used to study the chemical nature of the interaction of CO(2) with the surface sites. Although the particles always present the same Fe(3)O(4) phase, their structural anisotropy and size inhomogeneity are consequences of the preparation method of the carbon surface. Two types of chemisorption sites have been determined by using microcalorimetry: irreversible sites (280 kJ mol(-1)) at the uncoordinated sites of the facets and reversible sites (120 kJ mol(-1)) at the hydrated oxide surface of the small nanoparticles. N-Functionalization of the carbon support is advantageous, as it causes the formation of small nanoparticles, which are highly populated by reversible chemisorbing sites. These characteristic features correlate with a higher electrocatalytic performance., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)