Search

Among the various types of polymeric materials, geosynthetics deserve special attention. A geosynthetic is a product made from synthetic polymers that is embedded in soils for various purposes. There are some basic functions of geosynthetics, namely, erosion control, filtration, drainage, separation, reinforcement, containment, barrier, and protection. Geosynthetics for erosion control are very effective in preventing or limiting soil loss by water erosion on slopes or river/channel banks. Where the current line runs through the undercut area of the slope, the curvature of the arch is increased. If this phenomenon is undesirable, the meander arch should be protected from erosion processes. The combination of geosynthetics provides the best resistance to erosion. In addition to external erosion, internal erosion of soils is also a negative phenomenon. Internal erosion refers to any process by which soil particles are eroded from within or beneath a water-retaining structure. Geosynthetics, particularly geotextiles, are used to prevent internal erosion of soils in contact with the filters. Therefore, the main objective of this review paper is to address the many ways in which geosynthetics are used for erosion control (internal and external). Many examples of hydrotechnical and civil engineering applications of geosynthetics will be presented. [ABSTRACT FROM AUTHOR]

Implementing rain garden (RG) designs is widespread worldwide to reduce peak flow rates, promote stormwater infiltration, and treat pollutants. However, inadequate RG design degrades its hydrological behaviour, requiring the development and validation of an appropriate hydrological model for the design and analysis of structures. This study aimed to improve a hydrological infiltration model based on Darcy's law by taking into account the height of the water column (HWC) at the surface of the RG and the filtration coefficients of soil materials. The model was tested by simulating the hydrological characteristics of a rain garden based on a single rain event of critical intensity (36 mm/h). Using the validated model, design curves were obtained that predict the performance of the RG as a function of the main design parameters of the structure: water column height, ratio of catchment area to structure area, layer thickness, and soil filtration coefficient. The hydrological efficiency of the RG was evaluated in terms of the time of complete saturation, filling of the structure with water, and determining the change in HWC caused by changes in the parameters. The filtration coefficient and thickness of the upper and intermediate infiltration layers of the RG are the main parameters that affect the depth of saturation of the layers of the structure and the HWC on the surface. The model is not very sensitive to the model parameters related to the lower gravel layer. If the top layer's thickness increases by 10 cm, it takes longer to fill the structure with water, and the HWC on the surface reaches 0.341 m. The rain garden's performance improves when the filtration coefficient of the top layer is 7.0 cm/h. Complete saturation and filling of the structure with rainwater do not occur within 7200 s, and the water column reaches a height of 0.342 m at this filtration coefficient. However, the rain garden's effectiveness decreases if the filtration coefficient of the upper and intermediate layers exceeds 15 cm/h and 25 cm/h, respectively, or if the catchment area to RG area ratio decreases to values below 15. The modelling results confirm that considering the HWC in RG hydrological models is essential for designing structures to minimise the risk of overflow during intense rainfall events. [ABSTRACT FROM AUTHOR]

Improper recognition of the subsoil is the most common cause of problems in the implementation of construction projects and construction facilities failures. Most often, their direct cause is the mismatch of the scope of geotechnical diagnosis to the appropriate geotechnical category, or substantive errors, including incomplete or incorrect interpretation in the creation of a geological-engineering model and often overlooked hydrogeological conditions. In many cases, insufficient recognition and documentation of geotechnical and/or geological and engineering conditions leads to damage and construction failures, delays in consider construction, and the increase of the investment budget. That’s why, in order to avoid the above, particular attention should be paid to proper geotechnical and geological-engineering documentation at the design and construction stages. The selected example of the investment analyzed errors in the geological-engineering documentation, which mainly concerned the lack of recognition of locally occurring organic soils, the incorrectly determined location of the groundwater table and the degree of compaction of non-cohesive soils, and numerous errors of calculated values of soil uplift pressure. The detection of the errors presented in the paper made it possible to select the correct technology for the construction of the sanitary sewage system and to increase the thickness of the horizontal shutter made of jet grouting columns in the area of the excavation. In addition, the article discusses the principles of proper calculation of limit states and subsoil testing, which have a significant impact on the implementation of planned investments.

This paper examines the effectiveness of sustainable warehouse design with regard to fire regulations and costs. When designing industrial facilities, the high risk of fire during their subsequent operation must be considered. Therefore, in this article, the variant analysis in terms of cost and technological, sustainable solutions for the investment in the "design and build" system were subjected to fire protection installation systems for three variants with different fire zones. During the modelling, the impact of the fire zone on the spread of smoke, temperature changes at a selected point above the fire source, and visibility were examined. Numerical analyses showed differences in the degree of smoke spread for variants I, II, and III without any relevant impact on the effectiveness of evacuation. The division of the hall into a larger number of fire zones reduces the effects of a potential fire. This study highlights that the cost of the investment is vastly influenced by the conditions of fire protection and evacuation. [ABSTRACT FROM AUTHOR]

Almost every civil engineering project involves heavy construction equipment to create earthworks. This in turn is connected with carbon dioxide emissions, which are hazardous to the environment, especially in densely populated areas. Strict control and regulation of emissions from construction equipment has already been introduced in Hong Kong. This paper presents the results of several years of field research on the performance of construction equipment (excavators). The comparative analysis concerns the data obtained during a field survey in relation to the outlays proposed in the catalogues of material outlays commonly used in Poland (KNR catalogues.) The presented problem fills in the gaps in research on the performance of construction equipment. The results of the study clearly show the discrepancy between theoretical data from the KNR and the actual use of construction equipment during the construction of underground sanitary networks. Apart from the excessive consumption of diesel fuel, sequentially increased CO2 emissions occur. The presented research results allow for the development of an innovative method for the optimal use of heavy construction equipment, thus reducing CO2 emissions. This study is a continuation of a pilot study conducted by the staff of the Institute of Civil Engineering, Warsaw University of Life Science. [ABSTRACT FROM AUTHOR]

The paper presents the results of tests performed in a Torsional Shear Hollow Cylinder Apparatus on undisturbed cohesive soils. The tests were performed on lightly overconsolidated clay (Cl) and sandy silty clay (sasiCl). The main objective of the tests was to determine the undrained shear strength at different angles of rotation of the principal stress directions. The results of laboratory tests allow assessing the influence of rotation of the principal stress directions on the value of undrained shear strength that should be used during designing structure foundations