Search

Glaucoma is a group of eye conditions that damage the optic nerve, the health of which is vital for vision. The key risk factor for the development and progression of this disease is increased intraocular pressure (IOP). Implantable glaucoma drainage devices have been developed to divert aqueous humor from the glaucomatous eye as a means of reducing IOP. The artificial drainage pathway created by these devices drives the fluid into a filtering bleb. The long-term success of filtration surgery is dictated by the proper functioning of the bleb and overlying Tenon's and conjunctival tissue. To better understand the influence of the health condition of these tissues on IOP, we have developed a mathematical model of fluid production in the eye, its removal from the anterior chamber by a particular glaucoma implant–the PRESERFLO® MicroShunt–, drainage into the bleb and absorption by the subconjunctival vasculature. The mathematical model was numerically solved by commercial FEM package COMSOL. Our numerical results of IOP for different postoperative conditions are consistent with the available evidence on IOP outcomes after the implantation of this device. To obtain insight into the adjustments in the implant's hydrodynamic resistance that are required for IOP control when hypotony or bleb scarring due to tissue fibrosis take place, we have simulated the flow through a microshunt with an adjustable lumen diameter. Our findings show that increasing the hydrodynamic resistance of the microshunt by reducing the lumen diameter, can effectively help to prevent hypotony. However, decreasing the hydrodynamic resistance of the implant will not sufficiently decrease the IOP to acceptable levels when the bleb is encapsulated due to tissue fibrosis. Therefore, to effectively reduce IOP, the adjustable glaucoma implant should be combined with a means of reducing fibrosis. The results reported herein may provide guidelines to support the design of future glaucoma implants with adjustable hydrodynamic resistances. [ABSTRACT FROM AUTHOR]

We study the dynamics of two pinned droplets under the influence of an applied electric stress. We find that at a sufficiently strong field, this stress is sufficient to induce contact of the droplets. Interestingly, upon such contact, the dynamic behavior sensitively depends on the separation distance between the droplets. Besides the classical "coalescence" regime, we identify two other dynamic regimes: "fuse-and-split" and "periodic non-coalescence." In the "fuse-and-split" regime, the droplets first fuse to form a jet, which subsequently breaks up into two droplets. In the "periodic non-coalescence" regime, the droplets contact and bounce away periodically without coalescence. Further analysis indicates that while the electric stress stretches the droplets into shapes that depend on the initial droplet separation, the surface tension stress dominates over the electric stress as soon as the droplets touch. We show that the shapes of the contacting droplets determine their subsequent dynamics. Our work provides a rationale for understanding the interplay between surface tension and electric stresses that govern the behavior of charged droplets and could inspire new methods for characterizing emulsion stability and surfactant performance. [ABSTRACT FROM AUTHOR]

Aims: Monocytes play a significant role in the development of atherosclerosis. During the process of inflammation, circulating monocytes become activated in the blood stream. The consequent interactions of the activated monocytes with the blood flow and endothelial cells result in reorganization of cytoskeletal proteins, in particular of the microfilament structure, and concomitant changes in cell shape and mechanical behavior. Here we investigate the full elastic behavior of activated monocytes in relation to their cytoskeletal structure to obtain a better understanding of cell behavior during the progression of inflammatory diseases such as atherosclerosis. Methods and Results: The recently developed Capillary Micromechanics technique, based on exposing a cell to a pressure difference in a tapered glass microcapillary, was used to measure the deformation of activated and non-activated monocytic cells. Monitoring the elastic response of individual cells up to large deformations allowed us to obtain both the compressive and the shear modulus of a cell from a single experiment. Activation by inflammatory chemokines affected the cytoskeletal organization and increased the elastic compressive modulus of monocytes with 73–340%, while their resistance to shape deformation decreased, as indicated by a 25–88% drop in the cell’s shear modulus. This decrease in deformability is particularly pronounced at high strains, such as those that occur during diapedesis through the vascular wall. Conclusion: Overall, monocytic cells become less compressible but more deformable upon activation. This change in mechanical response under different modes of deformation could be important in understanding the interplay between the mechanics and function of these cells. In addition, our data are of direct relevance for computational modeling and analysis of the distinct monocytic behavior in the circulation and the extravascular space. Lastly, an understanding of the changes of monocyte mechanical properties will be important in the development of diagnostic tools and therapies concentrating on circulating cells. [ABSTRACT FROM AUTHOR]

Highlights: [•] Developed a new method for creating non-spherical colloidal particles. [•] Produced oblate ellipsoidal particles of controlled, uniform size and shape. [•] Optimized method to maintain high fluorescence intensity for 3D confocal imaging. [•] Opens up new possibilities for studying the behavior of non-spherical colloids. [Copyright &y& Elsevier]

The mechanical properties of tissues and cells including renal glomeruli are important determinants of their differentiated state, function, and responses to injury but are not well characterized or understood. Understanding glomerular mechanics is important for understanding renal diseases attributable to abnormal expression or assembly of structural proteins and abnormal hemodynamics. We use atomic force microscopy (AFM) and a new technique, capillary micromechanics, to measure the elastic properties of rat glomeruli. The Young's modulus of glomeruli was 2,500 Pa, and it was reduced to 1,100 Pa by cytochalasin and latunculin, and to 1,400 Pa by blebbistatin. Cytochalasin or latrunculin reduced the F/G actin ratios of glomeruli but did not disrupt their architecture. To assess glomerular biomechanics in disease, we measured the Young's moduli of glomeruli from two mouse models of primary glomerular disease, Col4a3-/- mice (Alport model) and Tg26HIV/nl mice (HIV-associated nephropathy model), at stages where glomerular injury was minimal by histopathology. Col4a3-/- mice express abnormal glomerular basement membrane proteins, and Tg26HIV/nl mouse podocytes have multiple abnormalities in morphology, adhesion, and cytoskeletal structure. In both models, the Young's modulus of the glomeruli was reduced by 30%. We find that glomeruli have specific and quantifiable biomechanical properties that are dependent on the state of the actin cytoskeleton and nonmuscle myosins. These properties may be altered early in disease and represent an important early component of disease. This increased deformability of glomeruli could directly contribute to disease by permitting increased distension with hemodynamic force or represent a mechanically inhospitable environment for glomerular cells. [ABSTRACT FROM AUTHOR]

Glass formation in colloidal suspensions has many of the hallmarks of glass formation in molecular materials. For hard-sphere colloids, which interact only as a result of excluded volume, phase behaviour is controlled by volume fraction, φ; an increase in φ drives the system towards its glassy state, analogously to a decrease in temperature, T, in molecular systems. When φ increases above φ* ≈ 0.53, the viscosity starts to increase significantly, and the system eventually moves out of equilibrium at the glass transition, φg ≈ 0.58, where particle crowding greatly restricts structural relaxation. The large particle size makes it possible to study both structure and dynamics with light scattering and imaging; colloidal suspensions have therefore provided considerable insight into the glass transition. However, hard-sphere colloidal suspensions do not exhibit the same diversity of behaviour as molecular glasses. This is highlighted by the wide variation in behaviour observed for the viscosity or structural relaxation time, τα, when the glassy state is approached in supercooled molecular liquids. This variation is characterized by the unifying concept of fragility, which has spurred the search for a ‘universal’ description of dynamic arrest in glass-forming liquids. For ‘fragile’ liquids, τα is highly sensitive to changes in T, whereas non-fragile, or ‘strong’, liquids show a much lower T sensitivity. In contrast, hard-sphere colloidal suspensions are restricted to fragile behaviour, as determined by their φ dependence, ultimately limiting their utility in the study of the glass transition. Here we show that deformable colloidal particles, when studied through their concentration dependence at fixed temperature, do exhibit the same variation in fragility as that observed in the T dependence of molecular liquids at fixed volume. Their fragility is dictated by elastic properties on the scale of individual colloidal particles. Furthermore, we find an equivalent effect in molecular systems, where elasticity directly reflects fragility. Colloidal suspensions may thus provide new insight into glass formation in molecular systems. [ABSTRACT FROM AUTHOR]

It is often assumed that the viscoelastic properties of dense colloids are determined by the colloid volume fraction, the interaction potential, as well as the particle size distribution and shape. The dependence of the viscoelastic behavior of particle suspensions and gels on these parameters has been widely studied, and is well understood in many cases. In contrast, our knowledge on the influence of microstructure on mechanical and rheological properties, in particular for high solid loading suspensions as used in ceramic processing, is much less developed. This aspect has been the focus of recent experiments, which show that small changes in microstructure can have dramatic effects on the mechanics and dynamics of concentrated colloidal gels. In this article, we attempt to give an overview of the influence of microstructure on the mechanical and rheological properties of colloidal systems. Particular attention is given to colloidal particle gels at high volume fractions. [ABSTRACT FROM AUTHOR]

We produce concentrated (40 vol%) gels of uniformly sized silica particles by an in situ process, based on the enzyme-catalyzed hydrolysis of urea in the liquid phase of electrostatically stabilized suspensions. Two different methods are used: Either the pH of the suspensions is shifted toward the isoelectric point of the particles (ΔpH method), or the ionic strength is continuously increased at constant pH (ΔI method). We compare the two kinds of gels in terms of elastic and yield behavior as well as microstructure by using rheological measurements in oscillation and high-pressure freezing in combination with cryo-SEM, respectively. Results suggest a strong increase of elastic and yield properties in concentrated particle gels with decreasing homogeneity of their microstructures. [Copyright &y& Elsevier]

The aggregation of concentrated aqueous silica suspensions is characterized by means of static light scattering. We use an in situ destabilization mechanism based on the enzyme-catalyzed hydrolysis of urea. This method enables us to continuously and homogeneously change the interparticle potential from repulsive to attractive without disturbing the aggregation process. Moreover, our electrostatically stabilized suspensions can be destabilized by two different methods. In the first method, the pH is shifted toward the isoelectric point of the particles (ΔpH method), thereby leading to a decrease of their surface charge. In the second method, the ionic strength is continuously increased at constant pH (ΔI method), leading to a compression of the electrical double layer around the charged particles. A laboratory-built flat-cell light-scattering instrument is used, which allows fast data acquisition and an adjustment of the sample cell thickness. To circumvent multiple scattering effects, we use a very small sample thickness (≈13 μm). In addition, the refractive index difference between the aqueous phase and the particles is reduced by adding sucrose to the liquid phase of our suspensions. We are able to characterize the structural changes at the very early stages of the destabilization process, where no significant effects are yet detected in macroscopic rheological measurements. While during the ΔpH destabilization, the scattering curve shows significant changes only after some characteristic delay time, it changes continuously during the ΔI destabilization. The latter is attributed to the formation of a weak pre-gel structure in the suspensions, as a shallow secondary minimum appears in the interparticle potential. Data are evaluated by using a HMSA square-well structure factor model. Results are in good agreement with those predicted from DLVO theory. [Copyright &y& Elsevier]

It is shown that the microstructures of concentrated suspensions can be analyzed in a quantitative way from cryo-SEM images of high-pressure frozen samples, both in the electrostatically stabilized and in the flocculated state. Suspensions of spherical silica particles (40 vol%) in an aqueous solution were used. The average particle radius was 525 nm with a polydispersity of below 7%. The suspensions were high-pressure frozen, which resulted in a quenching of the configuration without apparent change in volume or crack formation. After fracturing the samples at liquid nitrogen temperature, the fracture surface was etched by controlled sublimation of the frozen aqueous phase, coated with 8 nm of platinum, and examined by stereo-cryo-SEM. The 3-dimensional positions of all the visible particles were determined from the SEM images. Assuming an isotropic particle configuration in the sample before cracking, it is possible to extract the 3-dimensional pair correlation function from the particle positions on the fracture surface. A comparison to recent results from Brownian Dynamics simulations shows good agreement between our experiments and the simulations. [Copyright &y& Elsevier]

Glaucoma drainage devices are implanted in the eye to treat glaucoma, a disease that can cause vision loss and blindness. These devices are designed to reduce intraocular pressure (IOP), a major risk factor for the progression of glaucoma, by providing an alternative outflow path for the fluid produced by the eye, the aqueous humor. Here, a novel polymeric minimally invasive glaucoma implant designed to enhance aqueous humor outflow is demonstrated. The implant is made of a unique, potentially biodegradable thermoplastic material, polycarbonate bisamide (PC‐BA), and produced through replica molding using hot embossing and femtosecond laser‐machined glass molds. Post‐mortem experiments demonstrate successful device implantation into a rabbit's eye, with the implant remaining securely in place. Although the mass loss and changes in molecular weight observed in the in vitro degradation experiments are not significant within the tested times and degradation conditions, the PC‐BA is a slow‐degradation polymer that may take a few years to fully degrade. Thus, the implant will also slowly degrade and be absorbed by the body over time, leaving behind a natural outflow pathway. This potentially biodegradable glaucoma implant may represent a promising new approach for restoring outflow in a more natural way. [ABSTRACT FROM AUTHOR]

Electronic paper displays rely on electrokinetic effects in nonpolar solvents to drive the displacement of colloidal particles within a fluidic cell. While Electrophoresis (EP) is a well-established and frequently employed phenomenon, electro-osmosis (EO), which drives fluid flow along charged solid surfaces, has not been studied as extensively. We hypothesize that by exploiting the interplay between these effects, an enhanced particle transport can be achieved. In this study, we experimentally investigate the combined effects of EP and EO for colloidal particles in non-polar solvents, driven by an electric field. We use astigmatism micro-particle tracking velocimetry (A- μ PTV) to measure the motion of charged particles within model fluidic cells. Using a simple approach that relies on basic fluid flow properties we extract the contributions due to EP and EO, finding that EO contributes significantly to particle transport. The validity of our approach is confirmed by measurements on particles with different magnitudes of charge, and by comparison to numerical simulations. We find that EO flows can play a dominant role in the transport of particles in electrokinetic display devices. This can be exploited to speed up particle transport, potentially yielding displays with significantly faster switching times. Interplay of electrokinetic effects : Driven by the applied electric field, both electro-osmosis (EO, top left), which drives a flow along the surfaces of the fluidic cell, and electrophoresis (EP, top right), which drives a migration of particles relative to the background liquid, occur in our system. A typical example of the resultant particle velocity field (bottom) illustrates the important role of EO on particle transport in the fluidic cell. • Studied electrokinetics of particles in nonpolar solvent using astigmatism micro-PTV. • Both electrophoresis (EP) and electro-osmosis (EO) play important roles. • Combination of EO and EP could be exploited in faster switching e-paper displays. [ABSTRACT FROM AUTHOR]

In the article "A New Polymeric Minimally Invasive Glaucoma Implant," Jaap M.J. den Toonder and colleagues present a novel glaucoma implant that is minimally invasive, polymeric, and potentially biodegradable. The implant is made of a thermoplastic material using replica molding, offering a solution to common complications associated with metallic implants used in glaucoma surgery. The potential biodegradability of the implant after implantation introduces a promising approach to glaucoma management. The authors of the article include Inês C.F. Pereira, Paul A.A. Bartels, Christian J.F. Bertens, Serge H.M. Söntjens, Hans M. Wyss, Albertus P.H.J. Schenning, Patricia Y.W. Dankers, Henny J.M. Beckers, and Jaap M.J. den Toonder. [Extracted from the article]

Hydrogels were prepared with physical crosslinks comprising 2-ureido-4[1H]-pyrimidinone (UPy) hydrogen bonding units within the backbone of segmented amphiphilic macromolecules having hydrophihc poly(ethylene glycol) (PEG). The bulk materials adopt nanoscopic physical cross-links composed of UPy-UPy dimers embedded in segregated hydrophobic domains dispersed within the PEG matrix as comfirmed by cryo-electron microscopy. The amphiphilic network was swollen with high weight fractions of water (wH2≈0 0.8) owing to the high PEG weight fraction within the pristine polymers (wPEG 0.9). Two different PEG chain lengths were investigated and illustrate the corresponding consequences of cross link density on mechanical properties. The resulting hydrogels exhibited high strength and resilience upon deformation, consistent with a microphase separated network, in which the UPy-UPy interactions were adequately shielded within hydrophobic nanoscale pockets that maintain the network despite extensive water content. The cumulative result is a series of tough hydrogels with tunable mechanical properties and tractable synthetic preparation and processing. Furthermore, the melting transition of PEG in the dry polymer was shown to be an effective stimulus for shape memory behavior. [ABSTRACT FROM AUTHOR]

Embolization is a nonsurgical, minimally invasive procedure that deliberately blocks a blood vessel. Although several embolic particles have been commercialized, their much wider applications have been hampered owing mainly to particle size variation and uncontrollable degradation kinetics. Herein we introduce a microfluidic approach to fabricate highly monodisperse gelatin microparticles (GMPs) with a microshell structure. For this purpose, we fabricate uniform gelatin emulsion precursors using a microfluidic technique and consecutively cross-link them by inbound diffusion of glutaraldehyde from the oil continuous phase to the suspending gelatin precursor droplets. A model micromechanic study, carried out in an artificial blood vessel, demonstrates that the extraordinary degradation kinetics of the GMPs, which stems from the microshell structure, enables controlled rupturing while exhibiting drug release under temporary chemoembolic conditions [ABSTRACT FROM AUTHOR]

We report the preparation and structural and mechanical characterization of a tough supramolecular hydrogel, based exclusively on hydrophobic association. The system consists of a multiblock, segmented copolymer of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic dimer fatty acid (DFA) building blocks. A series of copolymers containing 2K, 4K, and 8K PEG were prepared. Upon swelling in water, a network is formed by self-assembly of hydrophobic DFA units in micellar domains, which act as stable physical cross-link points. The resulting hydrogels are noneroding and contain 75-92 wt % of water at swelling equilibrium. Small-angle neutron scattering (SANS) measurements showed that the aggregation number of micelles ranges from 2 x 10² to 6 x 10² DFA units, increasing with PEG molecular weight. Mechanical characterization indicated that the hydrogel containing PEG 2000 is mechanically very stable and tough, possessing a tensile toughness of 4.12 MJ/m³. The high toughness, processability, and ease of preparation make these hydrogels very attractive for applications where mechanical stability and load bearing features of soft materials are required. [ABSTRACT FROM AUTHOR]

Here we describe an automated and compact pollen detection system that integrates enrichment, in-situ detection and self-cleaning modules. The system can achieve continuous capture and enrichment of pollen grains in air samples by electrostatic adsorption. The captured pollen grains are imaged with a digital camera, and an automated image analysis based on machine vision is performed, which enables a quantification of the number of pollen particles as well as a preliminary classification into two types of pollen grains. In order to optimize and evaluate the system performance, we developed a testing approach that utilizes an airflow containing a precisely metered amount of pollen particles surrounded by a sheath flow to achieve the generation and lossless transmission of standard gas samples. We studied various factors affecting the pollen capture efficiency, including the applied voltage, air flow rate and humidity. Under optimized conditions, the system was successfully used in the measurement of airborne pollen particles within a wide range of concentrations, spanning 3 orders of magnitude. [Display omitted] • A pollen analyzer integrating automatic electrostatic enriching and image analysis. • On-line automatic image analysis based on machine vision. • A novel method for generation and lossless transmission of standard gas samples. • Automation of the whole process from pollen capture to analysis with high efficiency. [ABSTRACT FROM AUTHOR]

Interactions between surfaces and particles in aqueous suspension are usually limited to distances smaller than 1 μm. However, in a range of studies from different disciplines, repulsion of particles has been observed over distances of up to hundreds of micrometers, in the absence of any additional external fields. Although a range of hypotheses have been suggested to account for such behavior, the physical mechanisms responsible for the phenomenon still remain unclear. To identify and isolate these mechanisms, we perform detailed experiments on a well-defined experimental system, using a setup that minimizes the effects of gravity and convection. Our experiments clearly indicate that the observed long-range repulsion is driven by a combination of ion exchange, ion diffusion, and diffusiophoresis. We develop a simple model that accounts for our data; this description is expected to be directly applicable to a wide range of systems exhibiting similar long-range forces. [ABSTRACT FROM AUTHOR]

Hydrogels and, in particular, supramolecular hydrogels show promising properties for application in regenerative medicine because of their ability to adapt to the natural environment these materials are brought into. However, only few studies focus on the structure-property relationships in supramolecular hydrogels. Here, we study in detail both the structure and the mechanical properties of such a network, composed of poly(ethylene glycol), end-functionalized with ureido-pyrimidinone fourfold hydrogen bonding units. This network is responsive to triggers such as concentration, temperature and pH. To obtain more insight into the sol-gel transition of the system, both rheology and small-angle X-ray scattering (SAXS) are used. We show that the sol-gel transitions based on these three triggers, as measured by rheology, coincide with the appearance of a structural feature in SAXS. We attribute this feature to the presence of hydrophobic domains where cross-links are formed. These results provide more insight into the mechanism of network formation in these materials, which can be exploited for tailoring their behavior for biomedical applications, where one of the triggers discussed might be used. [ABSTRACT FROM AUTHOR]

We describe the preparation of an injectable, biocompatible,andelastic segmented copolymer hydrogel for biomedical applications,with segmented hydrophobic bisurea hard segments and hydrophilic PEGsegments. The segmented copolymers were obtained by the step growthpolymerization of amino-terminated PEG and aliphatic diisocyanate.Due to their capacity for multiple hydrogen bonding within the hydrophobicsegments, these copolymers can form highly stable gels in water atlow concentrations. Moreover, the gels show shear thinning by a factorof 40 at large strain, which allows injection through narrow gaugeneedles. Hydrogel moduli are highly tunable via the physical cross-linkdensity and the length of the hydrophilic segments. In particular,the mechanical properties can be optimized to match the propertiesof biological host tissues such as muscle tissue and the extracellularmatrix. [ABSTRACT FROM AUTHOR]

Diffusing-wave spectroscopy (DWS) extends dynamic light scattering measurements to samples with strong multiple scattering. DWS treats the transport of photons through turbid samples as a diffusion process, thereby making it possible to extract the dynamics of scatterers from measured correlation functions. The analysis of DWS data requires knowledge of the path length distribution of photons traveling through the sample. While for flat sample cells this path length distribution can be readily calculated and expressed in analytical form; no such expression is available for cylindrical sample cells. DWS measurements have therefore typically relied on dedicated setups that use flat sample cells. Here we show how DWS measurements, in particular DWS-based microrheology measurements, can be performed in standard dynamic light scattering setups that use cylindrical sample cells. To do so we perform simple random-walk simulations that yield numerical predictions of the path length distribution as a function of both the transport mean free path and the detection angle. This information is used in experiments to extract the mean-square displacement of tracer particles in the material, as well as the corresponding frequency-dependent viscoelastic response. An important advantage of our approach is that by performing measurements at different detection angles, the average path length through the sample can be varied. For measurements performed on a single sample cell, this gives access to a wider range of length and time scales than obtained in a conventional DWS setup. Such angle-dependent measurements also offer an important consistency check, as for all detection angles the DWS analysis should yield the same tracer dynamics, even though the respective path length distributions are very different. We validate our approach by performing measurements both on aqueous suspensions of tracer particles and on solidlike gelatin samples, for which we find our DWS-based microrheology data to be in good agreement with rheological measurements performed on the same samples. [ABSTRACT FROM AUTHOR]

We use dedicated microfluidic devices to expose soft hydrogel particles to a rapid change in the externally applied osmotic pressure and observe a surprising, nonmonotonic response: After an initial rapid compression, the particle slowly reswells to approximately its original size. We theoretically account for this behavior, enabling us to extract important material properties from a single microfluidic experiment, including the compressive modulus, the gel permeability, and the diffusivity of the osmolyte inside the gel. We expect our approach to be relevant to applications such as controlled release, chromatography, and responsive materials. [ABSTRACT FROM AUTHOR]