Search

Based on the corridor channel curtain wall reconstruction project at Wuhan Tianhe airport T2-T3 terminal building, the structural system of point supported glass curtain wall with cable structure 18 years ago was analyzed, the technical difficulties of curtain wall glass panel removal and bearing cable removal were studied, and technical measures for the dismantlement and reconstruction of point supported glass curtain wall with cable structure were reasonably proposed. During the construction process of the dismantlement and reconstruction, the curtain wall structure was dynamically monitored, the deformation of the monitoring points were small, and the construction process was in a safe state. Due to the success in the dismantlement and reconstruction control technology of the point supported glass curtain wall with cable structure in this project, it not only ensured the construction safety, but also improved the construction quality, which could provide a reference for other similar projects.

In order to investigate the effects of steel fiber, polyvinyl alcohol (PVA) fiber and mineral powder contnet on permeability resistance of steel-PVA hybrid fiber high performance concrete (HFHPC). The orthogonal experiment was designed to conduct the permeability resistance test of steel-PVA HFHPC, and the test results were analyzed through range analysis, variance analysis and regression analysis. The results show that the influence degree on the impermeability of HFHPC is steel fiber, mineral powder and PVA fiber from high to low. In the range of test level, the optimal horizontal combination of impermeability of concrete specimens is as follows: steel fiber volume fraction of 1.0%, PVA fiber volume fraction of 0.7% and slag powder mass replacement rate 20% . When the steel fiber volume fraction exceeds 1.0%, the impermeability of HFHPC decreases slightly, but it is still higher than that of standard plain concrete. Finally, multiple regression analysis is used to establish the prediction model of HFHPC permeability and steel fiber, PVA fiber and mineral powder. [ABSTRACT FROM AUTHOR]

It has been partially shown that salicylic acid (SA) as an imprinting molecule can produce better photocatalytic effect, while the contribution of SA as a molecular imprinting and degradation substrate is not clear. Herein, SA-TiO2 was prepared by a one-step molecular imprinting method using SA as the imprinting molecule and tetra-n-butyl titanate as the precursor, which was analyzed by XRD, UV–Vis, SEM, TEM-EDS, XPS, PL, FT-IR, EIS, and photocurrent response. The results shown that 1.5SA-TiO2 had the best electrochemical properties and therefore the best photoelectric effect. Moreover, the decolorization rates of SA within 30 min were 49.25% and 62.69% for TiO2 and SA-TiO2, respectively, indicating that the synthesized SA-TiO2 had better photocatalytic performance and could be applied in future scenarios for the efficient degradation of SA wastewater. [ABSTRACT FROM AUTHOR]