Search

For a conventional narrowband radar system, its insufficient bandwidth usually leads to the lack of detectable information of the target, and it is difficult for the radar to classify the target types, such as rotor helicopter, propeller aircraft, and jet aircraft. To address the classification problem of three different types of aircraft target, a joint multifeature classification method based on the micro-Doppler effect in the echo caused by the target micromotion is proposed in this paper. Through the characteristics analysis of the target simulation echoes obtained from the target scattering point model, four features with obvious distinguishability are extracted from the time domain and frequency domain, respectively, that is, flicker interval, fractal dimension, modulation bandwidth, and second central moment. Then, a support vector machine model will be applied to the classification of the three different types of aircraft. Compared with the conventional method, the proposed method has better classification performance and can significantly improve the classification probability of aircraft target. The simulations are carried out to validate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Spectrum aliasing occurs in signal echoes when the sampling frequency does not comply with the Nyquist Sampling Theorem. In this scenario, the extraction of micro-motion parameters becomes challenging. This paper proposes a spectral de-aliasing method for micro-motion signals based on a complex-valued U-Net network. Zero interpolation is employed to insert zeros into the echo, effectively increasing the sampling frequency. After zero interpolation, the micro-motion signal contains both real micro-motion signal frequency components and new frequency components. Short-Time Fourier Transform (STFT) is then applied to transform the zero-interpolated echo from the time domain to the time–frequency domain. Furthermore, a complex-valued U-Net training model is utilized to eliminate redundant frequency components generated by zero interpolation, thereby achieving the frequency reconstruction of micro-motion signal echoes. Finally, the training models are employed to process the measured data. The theoretical analysis, simulations, and experimental results demonstrate that this method is robust and feasible, and is capable of addressing the problem of micro-motion signal echo spectrum aliasing in narrowband radar. [ABSTRACT FROM AUTHOR]

A signal time‐frequency results inversion method is proposed for extracting micro‐motion features of rotor targets under low signal‐to‐noise ratios (SNRs). In the case of low SNRs, the echo's energy of rotor targets is mainly concentrated in the flash's echo component. Conventional micro‐motion feature extraction of rotor targets primarily utilises the sinusoidal modulation feature in time‐frequency results, whose energy is much lower than the flash. Under low SNRs, the sinusoidal modulation in the echo's time‐frequency results will be submerged in the noise, making feature extraction challenging. A deep learning network is used to inverse the time‐frequency results containing sinusoidal modulation based on the flash's features in the time‐frequency results. Based on the inversion time‐frequency results, the GS‐IRadon algorithm is used to extract micro‐motion features, which can significantly reduce the times of IRadon transformations and improve feature extraction speed and accuracy. Through simulation and analysis, a novel method using a deep learning network like UNet can effectively inverse time‐frequency results under low SNRs, providing a new technical approach for micro‐motion feature extraction. Time‐frequency results inversion is a novelty method used to achieve micro‐motion feature extraction of rotor targets. [ABSTRACT FROM AUTHOR]

In order to suppress the strong clutter component and separate the effective fretting component from narrow-band radar echo, a method based on complex variational mode decomposition (CVMD) is proposed in this paper. The CVMD is extended from variational mode decomposition (VMD), which is a recently introduced technique for adaptive signal decomposition, limited to only dealing with the real signal. Thus, the VMD is extended from the real domain to the complex domain firstly. Then, the optimal effective order of singular value is obtained by singular value decomposition (SVD) to solve the problem of under-decomposition or over-decomposition caused by unreasonable choice of decomposition layer, it is more accurate than detrended fluctuation analysis (DFA) and empirical mode decomposition (EMD). Finally, the strongly correlated modes and weakly correlated modes are judged by calculating the Mahalanobis distance between the band-limited intrinsic mode functions (BLIMFs) and the original signal, which is more robust than the correlation judgment methods such as computing cross-correlation, Euclidean distance, Bhattachryya distance and Hausdorff distance. After the weak correlation modes are eliminated, the signal is reconstructed locally, and the separation of the micro-motion signal is realized. The experimental results show that the proposed method can filter out the strong clutter component and the fuselage component from radar echo more effectively than the local mean decomposition (LMD), empirical mode decomposition and moving target indicator (MTI) filter. [ABSTRACT FROM AUTHOR]

In order to resolute the micro-Doppler frequency ambiguity caused by radar pulse repetition frequency not high enough (i.e., pulse dimension does not satisfy the requirement of Nyquist sampling theorem), this paper presents a micro-Doppler frequency ambiguity resolution method based on complex-valued U-net. The echo sequence is interpolated by zeros in the pulse dimension to increase the equivalent pulse repetition frequency, so that the echo sequence after zero interpolation contains the real micro-Doppler frequency; at the same time, some new frequency components are generated. The variation law of the echo sequence frequency after zero interpolation is analyzed. Then, the echo sequence in time domain after zero interpolation is transformed to the time-frequency domain by short-time Fourier transform (STFT). Finally, the time-frequency results can be segmented by the model, which is trained by complex-valued U-net to eliminate the redundant frequencies generated by zero interpolation; thus, the reconstruction of real micro-Doppler frequency is realized. Theoretical analysis and simulation results show that the proposed method can solve the problem of micro-Doppler frequency ambiguity. Compared with fully convolution network (FCN) and fully convolution residual network (FCRN), the proposed method has better performance and robustness. [ABSTRACT FROM AUTHOR]

This paper presents a passive bistatic radar (PBR) configuration using a global navigation satellite system as an illuminator of opportunity for the rotor blade feature extraction of a helicopter. Aiming at the strong fixed clutter in the surveillance channel of the PBR, a novel iteration clutter elimination method-based singular-value decomposition approach is proposed. Instead of the range elimination method used in the classic extended cancellation algorithm, the proposed clutter elimination method distinguishes the clutter using the largest singular value and by remove this value. At the same time, the fuselage echo of the hovering helicopter can also be suppressed along with the ground clutter, then the rotor echo of this can be obtained. In the micro-motion feature extraction, the mathematic principle of the flash generation process in the time–frequency distribution (TFD) is derived first. Next, the phase compensation method is applied to achieve the time–frequency flash shift in the TFD. After this, the center frequencies of the standard flashes in the TFD are compared with the standard frequency dictionary. The mean l1 norm is utilized to estimate the feature parameters of the helicopter rotor. In the experiments, the scattering point model and the physical optics facet model demonstrate that the proposed method can obtain more accurate parameter estimation results than some classic algorithms. [ABSTRACT FROM AUTHOR]

For inverse synthetic aperture radar (ISAR) imaging of targets with micromotion parts, the removal of micro-Doppler (m-D) effects is the key procedure. However, under the condition of a sparse aperture, the echo pulse is limited or incomplete, giving rise to the difficulty of eliminating m-D effects. Thus, a novel m-D effects removal algorithm is proposed, which can effectively eliminate m-D effects, as well as the interference introduced by noise and sparse aperture in the ISAR image of the main body. The proposed algorithm mainly includes two processing steps. First, combined with the cut-off point determined by the normalized singular value difference spectrum, the rough estimation of the main body is achieved by singular value decomposition (SVD). Then, the variational mode extraction (VME) is extended to complex variational mode extraction (CVME). The constrained variational problem constructed by bandwidth and spectral overlap constraints is solved by the alternating direction method of multipliers (ADMM), and the precise estimation of the main body is obtained. Experimental results based on both simulated and measured data demonstrate that the proposed algorithm can acquire the high-resolution ISAR image of the main body under noisy and sparse conditions. [ABSTRACT FROM AUTHOR]

With regard to inverse synthetic aperture radar imaging with limited bandwidth and sparse aperture, it is a challenge to traditional range-Doppler (RD) algorithm. We proposed an innovative two-dimensional (2D) joint sparse imaging algorithm, namely, 2D fast orthogonal matching pursuit (2D-FOMP) algorithm. In the proposed algorithm, one-dimensional OMP (1D-OMP) is extended to 2D-OMP in the complex domain from three aspects of atom recognition, projection update, and residual update. Then, the equivalence between 1D-OMP and 2D-OMP is analyzed theoretically. Meanwhile, two strategies that multi atom recognition and matrix recursive update are added in 2D-OMP to further improve the reconstruction speed of 2D-FOMP. Experimental results based on both simulated and measured data demonstrate that the proposed algorithm has good imaging performance under noisy and sparse conditions. [ABSTRACT FROM AUTHOR]