Search

The electron transport layer (ETL) with excellent charge extraction and transport ability is one of the key components of high-performance perovskite solar cells (PSCs). SnO2 has been considered as a more promising ETL for the future commercialization of PSCs due to its excellent photoelectric properties and easy processing. Herein, we propose a facile and effective ETL modification strategy based on the incorporation of methylenediammonium dichloride (MDACl2) into the SnO2 precursor colloidal solution. The effects of MDACl2 incorporation on charge transport, defect passivation, perovskite crystallization, and PSC performance are systematically investigated. First, the surface defects of the SnO2 film are effectively passivated, resulting in the increased conductivity of the SnO2 film, which is conducive to electron extraction and transport. Second, the MDACl2 modification contributes to the formation of high-quality perovskite films with improved crystallinity and reduced defect density. Furthermore, a more suitable energy level alignment is achieved at the ETL/perovskite interface, which facilitates the charge transport due to the lower energy barrier. Consequently, the MDACl2-modified PSCs exhibit a champion efficiency of 22.30% compared with 19.62% of the control device, and the device stability is also significantly improved. [ABSTRACT FROM AUTHOR]

Ferrimagnetic insulators (FMIs) have abundant advantages for the application in spintronic devices, which have attracted intensive studies. However, in most previous studies on heavy metal (HM)/FMI bilayers, the FMI layers are deposited by pulsed laser deposition (PLD), and the HM layers are deposited by magnetron sputtering. This will cause the interfacial contamination due to the inevitable vacuum breaking, and then significantly affect the spin‐orbit torque (SOT) generation and the Dzyaloshinskii–Moriya interaction (DMI) in the HM/FMI bilayers. In this work, the SOT and DMI in the HM/FMI bilayers deposited by magnetron sputtering without vacuum breaking are studied. The successful fabrication of the Tm3Fe5O12 (TmIG) layer, a typical FMI, with good crystallinity and perpendicular magnetic anisotropy (PMA) by magnetron sputtering is first demonstrated. Then by systematically varying the TmIG thickness, the SOT and DMI in the Pt/TmIG bilayers are studied. It is shown that the effective spin Hall angle in the Pt/TmIG bilayers is much larger than most previously reported values. It is further demonstrated that the DMI constant scales linearly with the inverse of the TmIG thickness, indicating the interfacial origin of the DMI. The study provides a piece of information for the basic understandings of the SOT and DMI in the HM/FMI bilayers. [ABSTRACT FROM AUTHOR]

Abstract: Single crystalline Cu9BiS6 nanoplates have been synthesized via a hydrothermal route. The X-ray diffraction (XRD) showed these resultant nanoplates having cubic symmetry with the cell constant of 0.556nm. The morphology of these nanoplates identified by scanning electron microscopy (SEM) was the hexagonal and octagonal configurations respectively. Microstructure characterized by transmission electron microscopy (TEM) revealed six side surfaces of the hexagonal nanoplate coincident with the {110} lattice planes and the octagonal nanoplate enclosed by the four {100} and four {110} lattice planes. Optical diffuse reflectance measurement demonstrated that these Cu9BiS6 nanoplates have a band gap of 1.25eV. [Copyright &y& Elsevier]