Search

Despite recent developments, selective C(sp

A mild visible-light-induced Pd-catalyzed one-pot three-component alkyl-carbamoylation and cyanation of alkenes was developed. This general transformation, which proceeds via the in situ formation of a reactive ketenimine intermediate, allows for a rapid construction of a broad range of valuable amides and nitriles from readily available alkenes, alkyl iodides, and isocyanides. An efficient synthesis of tetrazole and amidine via this approach was also demonstrated.

One-electron chemical reduction of 10-(dimesitylboryl)-N,N-di-p-tolylbenzo[c]phenanthrene-4-amine (3-B(Mes)2-[4]helix-9-N(p-Tol)2) 1 and 13-(dimesitylboryl)-N,N-di-p-tolyldibenzo[c,g]phenanthrene-8-amine (3-B(Mes)2-[5]helix-12-N(p-Tol)2) 2 gives rise to monoanions with extensive delocalization over the annulated helicene rings and the boron pz orbital. Two-electron chemical reduction of 1 and 2 produces open-shell biradicaloid dianions with temperature-dependent population of the triplet states due to small singlet-triplet gaps. These results have been confirmed by single-crystal X-ray diffraction, EPR and UV/vis-NIR spectroscopy, and DFT calculations., Stepwise chemical reduction of D–π–A triarylborane-based helicenes gives the corresponding monoanions and dianions with delocalized unpaired electrons. The structures were confirmed by single crystal X-ray diffraction.

The synthesis and characterization of 10-(dimesitylboryl)-N,N-di-p-tolylbenzo[c]phenanthren-4-amine (3-B(Mes)2 -[4]helix-9-N(p-Tol)2 1) and 13-(dimesitylboryl)-N,N-di-p-tolyldibenzo[c,g]phenanthren-8-amine (3-B(Mes)2 -[5]helix-12-N(p-Tol)2 2) are reported herein. Their electrochemical and photophysical properties have been studied experimentally and theoretically. The donor and acceptor-substituted helicene derivatives exhibit moderate fluorescence quantum yields in THF (Φf =0.48 and 0.61 for 1 and 2, respectively), which are higher than unsubstituted ones (Φf =0.18 for [4]helicene; Φf

The conversion of vast low-value saturated hydrocarbons into valuable chemicals is of great interest., The conversion of vast low-value saturated hydrocarbons into valuable chemicals is of great interest. Thanks to the progression of organometallic and coordination chemistry, transition metal catalysed C sp3–H bond functionalisation has now become a powerful tool for alkane transformations. Specifically, methods for alkane functionalisation include radical initiated C–H functionalisation, carbene/nitrene insertion, and transition metal catalysed C–H bond activation. This perspective provides a systematic and concise overview of each protocol, highlighting the factors that govern regioselectivity in these reactions. The challenges of the existing catalytic tactics and future directions for catalyst development in this field will be presented.

A series of new (tBu2PSCOPR2)IrHCl iridium complexes with ‘hybrid’ phosphinothious-phosphinite PSCOP ligands ([tBu2PSCOPR2 = 1-(SPtBu2)-3-(OPR2)-C6H4], R = tBu, 4a, R = Cy, 4b, R = iPr, 4c, and R = Et, 4d) have been synthesized and characterized. Treatment of complexes 4a–d with sodium tert-butoxide generates the active species for catalytic transfer-dehydrogenation of cyclooctane (COA) or n-octane using tert-butylethylene (TBE) as hydrogen acceptor to form cyclooctene (COE) or octenes, respectively. The catalytic activity of these complexes and the product selectivity in alkane dehydrogenation is greatly influenced by the steric properties of the pincer ligand. In general, the less sterically bulky complex exhibits higher catalytic activity than the more hindered complex. Among the new (PSCOP)Ir-type complexes, the least crowded complex (tBu2PSCOPEt2)IrHCl 4d is most active for n-octane/TBE transfer-dehydrogenation. The relatively crowded, less active, complexes (tBu2PSCOPtBu2)IrHCl (4a) and (tBu2PSCOPCy2)IrHCl (4b) exhibit high regioselectivity for α-olefin formation at the early stages of the reaction.

Alkanes, the main constituents of petroleum, are attractive feedstocks for producing value-added chemicals. Linear aldehydes and amines are two of the most important building blocks in the chemical industry. To date, there have been no effective methods for directly converting n-alkanes to linear aldehydes and linear amines. Here, we report a molecular dual-catalyst system for production of linear aldehydes via regioselective carbonylation of n-alkanes. The system is comprised of a pincer iridium catalyst for transfer-dehydrogenation of the alkane using t-butylethylene or ethylene as a hydrogen acceptor working sequentially with a rhodium catalyst for olefin isomerization-hydroformylation with syngas. The system exhibits high regioselectivity for linear aldehydes and gives high catalytic turnover numbers when using ethylene as the acceptor. In addition, the direct conversion of light alkanes, n-pentane and n-hexane, to siloxy-terminated alkyl aldehydes through a sequence of Ir/Fe-catalyzed alkane silylation and Ir/Rh-catalyzed alkane carbonylation, is described. Finally, the Ir/Rh dual-catalyst strategy has been successfully applied to regioselective alkane aminomethylation to form linear alkyl amines.

The conversion of inexpensive, saturated hydrocarbon feedstocks into value-added speciality chemicals using regiospecific, catalytic functionalization of alkanes is a major goal of organometallic chemistry. Linear alkylsilanes represent one such speciality chemical-they have a wide range of applications, including release coatings, silicone rubbers and moulding products. Direct, selective, functionalization of alkanes at primary C-H bonds is difficult and, to date, methods for catalytically converting alkanes into linear alkylsilanes are unknown. Here, we report a well-defined, dual-catalyst system for one-pot, two-step alkane silylations. The system comprises a pincer-ligated Ir catalyst for alkane dehydrogenation and an Fe catalyst that effects a subsequent tandem olefin isomerization-hydrosilylation. This method exhibits exclusive regioselectivity for the production of terminally functionalized alkylsilanes. This dual-catalyst strategy has also been applied to regioselective alkane borylations to form linear alkylboronate esters.

A novel hydrido iridium chloride complex supported by a tetradentate PNCP ligand has been synthesized and characterized. Upon activation with NaOtBu, the PNCP-IrHCl complex is active for transfer dehydrogenation of cyclic and linear alkanes.

Catalytic α-alkylation of esters with primary alcohols is a desirable process because it uses low-toxicity agents and generates water as the by-product. Reported herein is a NCP pincer/Ir catalyst which is highly efficient for α-alkylation of a broad scope of unactivated esters under mild reaction conditions. For the first time, alcohols alkylate unactivated α-substituted acyclic esters, lactones, and even methyl and ethyl acetates. This method can be applied to the synthesis of carboxylic acid derivatives with diverse structures and functional groups, some of which would be impossible to access by conventional enolate alkylations with alkyl halides.

The α-alkylation of unactivated amides with alcohols is described. Using a NCP-type pincer Ir complex as the precatalyst and KOtBu as the base, the reactions of secondary or tertiary acetamides with benzyl or nonbenzyl primary alcohols occur at 80 °C, furnishing the alkylation products in good yields. This method represents a practical and green means of α-alkylation of amides in a relatively mild, efficient, and selective manner with low catalyst loadings (0.5 mol %).

Catalytic alkane dehydrogenation is a reaction with tremendous potential for application. We describe a highly active PSCOP-pincer iridium catalyst for transfer dehydrogenation of cyclic and linear alkanes. The dehydrogenation of linear alkanes occurs under relatively mild conditions with high regioselectivity for α-olefin formation. In addition, the catalyst system is very effective in the dehydrogenation of heterocycles to form heteroarenes and olefinic products.

A unique Ir complex (tBuNCCP)Ir with the pyridine–phosphine pincer as the sole ligand, featuring a dual agostic interaction between the Ir and two σ C−H bonds from a tBu substituent, has been prepared. This complex exhibits exceptionally high activity and excellent regio- and stereoselectivity for monoisomerization of 1-alkenes to trans-2-alkenes with wide functional-group tolerance. Reactions can be performed in neat reactant on a more than 100 gram scale using 0.005 mol % catalyst loadings with turnover numbers up to 19000.

The α-alkylation of unactivated amides with alcohols is described. Using a NCP-type pincer Ir complex as the precatalyst and KOtBu as the base, the reactions of secondary or tertiary acetamides with benzyl or nonbenzyl primary alcohols occur at 80 °C, furnishing the alkylation products in good yields. This method represents a practical and green means of α-alkylation of amides in a relatively mild, efficient, and selective manner with low catalyst loadings (0.5 mol %).

A catalytic alkane metathesis provides a mild and selective degradation of polyethylene wastes into valuable fuels and waxes., Polyethylene (PE) is the largest-volume synthetic polymer, and its chemical inertness makes its degradation by low-energy processes a challenging problem. We report a tandem catalytic cross alkane metathesis method for highly efficient degradation of polyethylenes under mild conditions. With the use of widely available, low-value, short alkanes (for example, petroleum ethers) as cross metathesis partners, different types of polyethylenes with various molecular weights undergo complete conversion into useful liquid fuels and waxes. This method shows excellent selectivity for linear alkane formation, and the degradation product distribution (liquid fuels versus waxes) can be controlled by the catalyst structure and reaction time. In addition, the catalysts are compatible with various polyolefin additives; therefore, common plastic wastes, such as postconsumer polyethylene bottles, bags, and films could be converted into valuable chemical feedstocks without any pretreatment.

In the presence of a NCP pincer/Ir catalyst, alcohols alkylate unactivated α-substituted acyclic esters, lactones, and even methyl and ethyl acetates with water as a by-product.

Iridium complexes of novel NCP pincer ligands containing pyridine and phosphinite arms have been synthesized. One Ir complex shows good catalytic activity for alkane dehydrogenation, and all complexes are highly active for olefin isomerization. A combination of the Ir complex and a (PNN)Fe pincer complex catalyzes the formation of linear alkylboronates selectively from internal olefins via sequential olefin isomerization–hydroboration.

A new phosphinothious/phosphinite Ir pincer complex is prepared and successfully applied as catalyst for the transfer dehydrogenation of a variety of heterocycles using 3,3-dimethylbuten as hydrogen acceptor.