Search

Abstract Background Asthma is a heterogeneous inflammatory disease with two main clinical endotypes: type 2 (T2) high and low asthma. The plasticity and autophagy in dendritic cells (DCs) influence T helper (Th)2 or Th17 differentiation to regulate asthma endotypes. Enhanced autophagy in DCs fosters Th2 differentiation in allergic environments, while reduced autophagy favors Th17 cell differentiation in sensitized and infected environments. Autophagy regulation in DCs involves interaction with various pathways like G protein‐coupled receptor (GPCR), mammalian target of rapamycin (mTOR), or phosphoinositide 3‐kinase (PI3K) pathway. However, specific molecules within DCs influencing asthma endotypes remain unclear. Methods Gene expression data series (GSE) 64896, 6858, 2276, and 55247 were obtained from gene expression omnibus (GEO) database. Differentially expressed genes (DEGs) between CD103+ and CD11b+ DCs after induction by ovalbumin (OVA) and lipopolysaccharide (LPS) were analyzed using GEO2R. DEGs were examined through Gene Ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG), and protein–protein interaction (PPI) analyses. The hub gene network was construct with STRING database and Cytoscape. Autophagy differences in DCs and the selected hub gene in GSE6858, GSE2276, and GSE55247 were evaluated using student t tests. Results Our analysis identified 635 upregulated and 360 downregulated genes in CD11b+ DCs, compared to CD103+ DCs. These DEGs were associated with “PI3K‐AKT signaling pathway,” “Ras signaling pathway,” and so forth. Thirty‐five hub genes were identified, in which G protein subunit gamma transduction protein 2 (Gngt2) in CD11b+ DCs exhibited a relatively specific increase in expression associated with autophagy defects under the induction environment similar to T2 low asthma model. No significant difference was found in lung Gngt2 expression between T2 high asthma model and control group. Conclusion Our analysis suggested Gngt2 acted as an adapter molecule that inhibited autophagy, promoting Th17‐mediated airway inflammation via the GPCR pathway in a T2 low asthma mice model. Targeting this pathway provides new asthma treatment strategies in preclinical research.

Abstract The death of coronavirus disease 2019 (COVID-19) is primarily due to from critically ill patients, especially from ARDS complications caused by SARS-CoV-2. Therefore, it is essential to contribute an in-depth understanding of the pathogenesis of the disease and to identify biomarkers for predicting critically ill patients at the molecular level. Immunogenic cell death (ICD), as a specific variant of regulatory cell death driven by stress, can induce adaptive immune responses against cell death antigens in the host. Studies have confirmed that both innate and adaptive immune pathways are involved in the pathogenesis of SARS-CoV-2 infection. However, the role of ICD in the pathogenesis of severe COVID-19 has rarely been explored. In this study, we systematically evaluated the role of ICD-related genes in COVID-19. We conducted consensus clustering, immune infiltration analysis, and functional enrichment analysis based on ICD differentially expressed genes. The results showed that immune infiltration characteristics were altered in severe and non-severe COVID-19. In addition, we used multiple machine learning methods to screen for five risk genes (KLF5, NSUN7, APH1B, GRB10 and CD4), which are used to predict COVID-19 severity. Finally, we constructed a nomogram to predict the risk of severe COVID-19 based on the classification and recognition model, and validated the model with external data sets. This study provides a valuable direction for the exploration of the pathogenesis and progress of COVID-19, and helps in the early identification of severe cases of COVID-19 to reduce mortality.

Miner face images, as important carriers of information transmission, are an important means of digital transformation and intelligent management of mining enterprises. In order to address the issue of complex degradation factors such as noise, blurring, and low resolution, a blind restoration model for miners’ face images was proposed based on improved GFP-GAN, and could make it difficult for blind image restoration to balance fidelity and authenticity. Firstly, the model introduced a UNet++ network to remove complex degradation from miners’ face images using the pre-trained StyleGAN2 network as a priori knowledge. Secondly, in the channel-split spatial feature transform layer, a channel attention mechanism was introduced to better use the prior features in the pre-training network, which could make the final output of the miners’ face images consider both authenticity and fidelity. Compared with other model algorithms, the experimental outcomes clearly indicate that our proposed method surpasses the current leading techniques in LPIPS (0.3827), FID (46.51), NIQE (5.206), and other indicators.

Rare earth elements (REEs) have gained attention as tracers of pedogenic processes over the last few decades. Clay-sized fractions (CSFs, < 2 μm) may play a crucial role in hosting REEs. To better understand the pedochemical signals of REEs in clay-sized phases, such as iron oxides and phyllosilicates, we analyzed REE speciation in CSFs of carbonate rocks (limestone), clastic rocks (sandstone and shale), and their derived saprolites. Our results quantified the REE content (41.2–144.6 mg kg−1) and speciation in CSFs of parent materials, revealing that REEs were primarily hosted in amorphous iron oxides (Feox1), followed by crystalline iron oxides (Feox2) and phyllosilicates. Compared to parent materials, saprolites derived from carbonate rocks exhibited more than a two-fold enrichment of REEs in major clay-sized phases, confirming the role of CSFs as REE sinks during carbonate rock weathering. Furthermore, the initial REE patterns of CSFs of carbonate rocks underwent alteration throughout the weathering process, likely due to water–mineral interactions. Our findings suggest that REEs in CSFs record the weathering fingerprint for soils derived from carbonate rocks, while they are indicative of provenance for soils originating from clastic rocks.

Abstract Objective The present study aimed to determine the effect and mechanical mechanism of spontaneous breathing during mechanical ventilation on oxygenation and lung injury using Beagles dogs mild or moderate acute respiratory distress syndrome (ARDS) model. Methods After inducing mild or moderate ARDS by infusion of oleic acid, Eighteen Beagles dogs were randomly split into Spontaneous breathing group (BIPAPSB, n = 6), and Complete muscle paralysis group (BIPAPPC, n = 6),Six Beagles without ventilator support comprised the control group. Both groups were ventilated for 8 h under BIPAP mode. High-pressure was titrated TV to 6 ml/kg. A multi-pair esophageal balloon electrode catheter was used to measure respiratory mechanics and electromyogram. End-expiratory lung volume (EELV), gas exchange and respiratory variables were recorded in the process of mechanical ventilation. The contents of Interleukin (IL)-6 and IL-8 in lung tissue were measure using qRT-PCR. Besides, lung injury score was calculated in the end of mechanical ventilation. Results Based on the comparable setting of ventilator, BIPAPSB group exhibited higher safety peak transpulmonary pressure, abdominal pressure, EELV and P/F(PaO2/FiO2) than BIPAPPC group, whereas mean transpulmonary pressure, the mRNA levels of the IL-6 and IL-8 in the lung tissues and lung injury score in BIPAPSB group were lower than those in BIPAPPC group. Conclusion In mild to moderate ARDS animal models, during mechanical ventilation, SB may improve respiratory function and reduce ventilator-induced lung injury. The mechanism may be that spontaneous inspiration up-regulates peak transpulmonary pressure and EELV; Spontaneous expiration decreases mean transpulmonary pressure by up-regulating intra-abdominal pressure, thereby reducing stress and strain.

Billions of apoptotic cells are removed daily in a human adult by professional phagocytes (e.g. macrophages) and neighboring nonprofessional phagocytes (e.g. stromal cells). Despite being a type of professional phagocyte, neutrophils are thought to be excluded from apoptotic sites to avoid tissue inflammation. Here, we report a fundamental and unexpected role of neutrophils as the predominant phagocyte responsible for the clearance of apoptotic hepatic cells in the steady state. In contrast to the engulfment of dead cells by macrophages, neutrophils burrowed directly into apoptotic hepatocytes, a process we term perforocytosis, and ingested the effete cells from the inside. The depletion of neutrophils caused defective removal of apoptotic bodies, induced tissue injury in the mouse liver, and led to the generation of autoantibodies. Human autoimmune liver disease showed similar defects in the neutrophil-mediated clearance of apoptotic hepatic cells. Hence, neutrophils possess a specialized immunologically silent mechanism for the clearance of apoptotic hepatocytes through perforocytosis, and defects in this key housekeeping function of neutrophils contribute to the genesis of autoimmune liver disease.

BackgroundDisseminated tuberculosis is an uncommon but devastating form of tuberculosis, possibly developing with the immune response of patients. COVID-19 infection may produce an immunosuppressive effect with possible implications for tuberculosis dissemination.Case presentationA 17-year-old female patient with a history of tuberculous pleurisy presented to the hospital with a high fever and life-threatening dyspnea after contracting a COVID-19 infection. Her condition deteriorated rapidly with grand mal epilepsy and acute gastrointestinal bleeding with a grossly depressed CD4 T-cell count, which was indicative of her profoundly immunosuppressed state. After identifying Mycobacterium tuberculosis in her cerebrospinal fluid and a subcutaneous abscess in her left lower back, she was diagnosed with disseminated tuberculosis involving both lungs, the central nervous system, the terminal ileum, the liver, bilateral adnexal tissue, and subcutaneous soft tissue in accordance with the chest and abdominal CT. Empirical treatment was initiated with dexamethasone (5 mg/day) and an anti-tuberculosis regimen of isoniazid, rifampicin, pyrazinamide, amikacin, and meropenem, which was replaced with faropenem after she left the hospital. The therapeutic effect was considered satisfied in the second month of follow-up.ConclusionTo the best of our knowledge, we report the first case report of disseminated tuberculosis after COVID-19 infection. Tuberculosis may disseminate and progress during the COVID-19 pandemic, requiring more significant studies to provide better diagnosis and treatment options for the co-infection.

Implantable biomaterials are widely used in the curative resection and palliative treatment of various types of cancers. However, cancer residue around the implants usually leads to treatment failure with cancer reoccurrence. Postoperation chemotherapy and radiation therapy are widely applied to clear the residual cancer cells but induce serious side effects. It is urgent to develop advanced therapy to minimize systemic toxicity while maintaining efficient cancer-killing ability. Herein, we report a degenerate layered double hydroxide (LDH) film modified implant, which realizes microenvironment-responsive electrotherapy. The film can gradually transform into a nondegenerate state and release holes. When in contact with tumor cells or bacteria, the film quickly transforms into a nondegenerate state and releases holes at a high rate, rendering the “electrocution” of tumor cells and bacteria. However, when placed in normal tissue, the hole release rate of the film is much slower, thus, causing little harm to normal cells. Therefore, the constructed film can intelligently identify and meet the physiological requirements promptly. In addition, the transformation between degenerate and nondegenerate states of LDH films can be cycled by electrical charging, so their selective and dynamic physiological functions can be artificially adjusted according to demand.

In this submission, we report a maximum 638-W fiberized chirped-pulse-amplification (CPA) laser system with a bulk reflection grating compressor. The system is able to emit 338-W compressed pulses of 624 fs centered at 1 µm, corresponding to a pulse energy of 1.3 µJ at a pulse repetition rate of 258 MHz. The output beam quality factor M2 is measured to be

Abstract A simple prognostic model is needed for ICU patients. This study aimed to construct a modified prognostic model using easy-to-use indexes for prediction of the 28-day mortality of critically ill patients. Clinical information of ICU patients included in the Medical Information Mart for Intensive Care III (MIMIC-III) database were collected. After identifying independent risk factors for 28-day mortality, an improved mortality prediction model (mionl-MEWS) was constructed with multivariate logistic regression. We evaluated the predictive performance of mionl-MEWS using area under the receiver operating characteristic curve (AUROC), internal validation and fivefold cross validation. A nomogram was used for rapid calculation of predicted risks. A total of 51,121 patients were included with 34,081 patients in the development cohort and 17,040 patients in the validation cohort (17,040 patients). Six predictors, including Modified Early Warning Score, neutrophil-to-lymphocyte ratio, lactate, international normalized ratio, osmolarity level and metastatic cancer were integrated to construct the mionl-MEWS model with AUROC of 0.717 and 0.908 for the development and validation cohorts respectively. The mionl-MEWS model showed good validation capacities with clinical utility. The developed mionl-MEWS model yielded good predictive value for prediction of 28-day mortality in critically ill patients for assisting decision-making in ICU patients.

Abstract Objective To compare the effects of unassisted spontaneous breathing (SB) and complete muscle paralysis (PC) on early severe acute respiratory distress syndrome (ARDS) in an animal model, and to explore the possibility of biphasic positive airway pressure (BIPAP) as lung protective ventilation support for patients in the early stage of severe ARDS. Methods Twelve healthy beagle dogs between the ages of 10 and 15 months were randomly divided into two groups: the SB group (BIPAPSB) and the PC group (BIPAPPC). Arterial blood samples were drawn before modelling. Arterial blood gas analysis and mechanical tests were conducted. The animal model of severe ARDS was established using a deep intravenous injection of oleic acid, and BIPAP ventilation was performed for 8 hours. Lung tissue and blood were taken to detect lung function, inflammatory reactions and degree of pathological damage. Results At the beginning of the experiment, there was no significant difference in the arterial blood gas analysis between the two groups (p > 0.05). After successful modelling, the oxygenation index and the end-expiratory lung volume in the SB group were significantly higher than those in the PC group 8 hours after MV. Pathologically, the wet-dry ratio and pathological score of the PC group were higher than those of the SB group; the lung injury in the gravity-dependent area in the SB group was less than that in the PC group (p

With wind power integrated into the power system on a large scale, the system has become vulnerable to the frequency stability issue. The battery energy storage system (BESS) is considered the key solution to improving the system frequency regulation performance due to its fast response ability. Furthermore, the construction of wind-storage combined frequency regulation systems has been developed for many years, in which the optimal capacity configuration of the wind-storage system is getting more attention. However, the secondary frequency drop (SFD) caused by wind turbines (WTs) participating in primary frequency regulation (PFR) is neglected in most existing capacity configurations, which is worthy of further study. In this paper, the optimal capacity of the wind-storage combined frequency regulation system is studied from the perspective of SFD. The time-domain expressions of two-stage system frequency response considering SFD are derived based on the wind-storage combined frequency regulation model. Next, considering the technical and economic characteristics of wind-storage combined frequency regulation, an optimization model of the energy storage capacity configuration is established with the objective of minimizing the sum of the maximum frequency deviations in two stages and the energy storage cost. The optimization model is solved by the multi-objective salp swarm algorithm (MSSA) to obtain the setting value of wind-storage combined frequency regulation parameters and the optimal energy storage capacity. The effectiveness of the proposed method is verified in MATLAB. The simulation results show that the proposed model can effectively improve the frequency regulation effect of the system and ensure the optimal capacity configuration with better economy.

Manganese (Mn) is an essential micronutrient in various physiological processes, but its functions in bone metabolism remain undefined. This is partly due to the interplay between immune and bone cells because Mn plays a central role in the immune system. In this study, we utilized the plasma immersion ion implantation and deposition (PIII&D) technique to introduce Mn onto the titanium surface. The results demonstrated that Mn-implanted surfaces stimulated the shift of macrophages toward the M1 phenotype and had minimal effects on the osteogenic differentiation of mouse bone marrow mesenchymal stem cells (mBMSCs) under mono-culture conditions. However, they promoted the M2 polarization of macrophages and improved the osteogenic activities of mBMSCs under co-culture conditions, indicating the importance of the crosstalk between mBMSCs and macrophages mediated by Mn in osteogenic activities. This study provides a positive incentive for the application of Mn in the field of osteoimmunology.

Abstract Background As one of the basic treatments performed in the intensive care unit, mechanical ventilation can cause ventilator-induced acute lung injury (VILI). The typical features of VILI are an uncontrolled inflammatory response and impaired lung barrier function; however, its pathogenesis is not fully understood, and c-Fos protein is activated under mechanical stress. c-Fos/activating protein-1 (AP-1) plays a role by binding to AP-1 within the promoter region, which promotes inflammation and apoptosis. T-5224 is a specific inhibitor of c-Fos/AP-1, that controls the gene expression of many proinflammatory cytokines. This study investigated whether T-5224 attenuates VILI in rats by inhibiting inflammation and apoptosis. Methods The SD rats were divided into six groups: a control group, low tidal volume group, high tidal volume group, DMSO group, T-5224 group (low concentration), and T-5224 group (high concentration). After 3 h, the pathological damage, c-Fos protein expression, inflammatory reaction and apoptosis degree of lung tissue in each group were detected. Results c-Fos protein expression was increased within the lung tissue of VILI rats, and the pathological damage degree, inflammatory reaction and apoptosis in the lung tissue of VILI rats were significantly increased; T-5224 inhibited c-Fos protein expression in lung tissues, and T-5224 inhibit the inflammatory reaction and apoptosis of lung tissue by regulating the Fas/Fasl pathway. Conclusions c-Fos is a regulatory factor during ventilator-induced acute lung injury, and the inhibition of its expression has a protective effect. Which is associated with the antiinflammatory and antiapoptotic effects of T-5224.

The behavior of droplets collision in a flash evaporation ambient widely exists in various fields. In this work, the deformation analysis and thermal analysis models were established under the condition of flash via a computational fluid dynamics (CFD) method. First, the effects of initial temperature and collision velocity on heat and mass transfer during evaporation were considered. Then, the morphology change of the liquid phase, the mass change, and their influencing factors during the droplet evaporation process were analyzed. A very good agreement is observed between the results of this paper and the published literature. The results show that the interaction between the initial collision velocity and the initial temperature affects the heat and mass transfer performance. The initial collision velocity influences the heat and mass transfer process of the evaporating droplet by affecting the deformation characteristics of the droplet. The collision velocity and the liquid temperature have a competitive relationship with the evaporation process. Under a low-initial temperature, the collision velocity played a leading role in the evaporation of the liquid phase and the mass transfer of steam.

Abstract Previous studies demonstrated that cGAS pathway is related to the inflammation amplification in a variety of autoimmune diseases. Lysine acetyltransferase family (KATs) can regulate the nuclear transcription or cytoplasmic activation of cGAS through different mechanisms. However, its role and related immunity patterns in systemic lupus erythematosus (SLE) have not been explored. In this study, RNA-seq and scRNA-seq profiling were performed for peripheral blood mononuclear cells (PBMCs) from patients with SLE. R packages were used for bioinformatic analysis. Cell culture, RT-PCR, western blotting, immunofluorescence, immunohistochemistry, and ELISA were used to explore gene expression in vitro or clinical specimens. Plasmid transfection and mass spectrometry were used to detect protein modifications. Eight acetyltransferase and deacetylase family members with significantly differential expression in SLE were found. Among them, KAT2A was abnormally upregulated and positively correlated with disease activity index. Further, KAT2A-cGAS pathway was aberrantly expressed in specific immune cell subsets in SLE. In vitro studies showed KAT2A modulated cGAS through increasing expression and post-translational modification. Our research provides novel insights for accurately positioning specific immune-cell subgroups in which KAT2A-cGAS reaction mainly works and KAT2A regulation patterns.

Functionalization of endohedral metallofullerenes (EMFs) plays an important role in exploring the reactivity of EMFs and stabilizing missing EMFs, thus conferring tunable properties and turning EMFs into applicable materials. In this review, we present exhaustive progress on the functionalization of EMFs since 2019. Classic functionalization reactions include Prato reactions, Bingel–Hirsch reactions, radical addition reactions, carbene addition reactions, and so on are summarized. And new complicated multi-component reactions and other creative reactions are presented as well. We also discuss the structural features of derivatives of EMFs and the corresponding reaction mechanisms to understand the reactivity and regioselectivity of EMFs. In the end, we make conclusions and put forward an outlook on the prospect of the functionalization of EMFs.

Curcumin (CUR) is a natural bioactive compound that has attracted attention as a “golden molecule” due to its therapeutic properties against several types of tumors. Nonetheless, the antitumor application of CUR is hampered due to its extremely low aqueous solubility and chemical instability. Herein, a novel type of CUR-loaded polymeric micelles with intracellular K+-responsive controlled-release properties is designed and developed. The polymeric micelles are self-assembled by poly (N-isopropylacrylamide-co-acryloylamidobenzo-15-crown-5-co-N, N-dimethylacrylamide)-b-DSPE (PNDB-b-DSPE) block copolymers, and CUR. CUR is successfully loaded into the micelles with a CUR loading content of 6.26 wt%. The proposed CUR-PNDB-DSPE polymeric micelles exhibit a significant CUR release in simulated intracellular fluid due to the formation of 2 : 1 ‘‘sandwich’’ host–guest complexes of 15-crown-5 and K+, which lead to the hydrophilic outer shell of micelles to collapse and the drug to rapidly migrate out of the micelles. In vitro, the B16F10 cell experiment indicates that CUR-PNDB-DSPE micelles exhibit a high cellular uptake and excellent intracellular drug release in response to the intracellular K+ concentration. Moreover, CUR-PNDB-DSPE micelles show high cytotoxicity to B16F10 cells compared to free CUR and CUR-PEG-DSPE micelles. The polymeric micelles with intracellular K+-responsive controlled release properties proposed in this study provide a new strategy for designing novel targeted drug delivery systems for CUR delivery for cancer treatment.

Ds-block elements have been gaining increasing attention in the field of biomaterials modification, owing to their excellent biological properties, such as antibiosis, osteogenesis, etc. However, their function mechanisms are not well understood and conflicting conclusions were drawn by previous studies on this issue, which are mainly resulted from the inconsistent experimental conditions. In this work, three most widely used ds-block elements, copper, zinc, and silver were introduced on titanium substrate by plasma immersion ion implantation method to investigate the rule of ds-block elements in the immune responses. Results showed that the implanted samples could decrease the inflammatory responses compared with Ti sample. The trend of anti-inflammatory effects of macrophages on samples was in correlation with cellular ROS levels, which was induced by the implanted biomaterials and positively correlated with the number of valence electrons of ds-block elements. The co-culture experiments of macrophages and bone marrow mesenchymal stem cells showed that these two kinds of cells could enhance the anti-inflammation and osteogenesis of samples by the paracrine manner of PGE2. In general, in their steady states on titanium substrate (Cu2+, Zn2+, Ag), the ds-block elements with more valence electrons exhibit better anti-inflammatory and osteogenic effects. Moreover, molecular biology experiments indicate that the PGE2-related signaling pathway may contribute to the desired immunoregulation and osteoinduction capability of ds-block elements. These findings suggest a correlation between the number of valence electrons of ds-block elements and the relevant biological responses, which provides new insight into the selection of implanted ions and surface design of biomaterials.

Soft tissue sealing around implants acts as a barrier between the alveolar bone and oral environment, protecting implants from the invasion of bacteria or external stimuli. In this work, magnesium (Mg) and zinc (Zn) are introduced into titanium by plasma immersed ion implantation technology, and their effects on the behaviors of human gingival fibroblasts (HGFs) as well as the underlying mechanisms are investigated. Surface characterization confirms Mg and Zn exist on the surface in metallic and oxidized states. Contact angle test suggests that surface wettability of titanium changes after ion implantation and thus influences protein adsorption of surfaces. In vitro studies disclose that HGFs on Mg ion-implanted samples exhibit better adhesion and migration while cells on Zn ion-implanted samples have higher proliferation rate and amounts. The results of immunofluorescence staining and real-time reverse-transcriptase polymerase chain reaction (RT-PCR) suggest that Mg mainly regulates the motility and adhesion of HGFs through activating the MAPK signal pathway whereas Zn influences HGFs proliferation by triggering the TGF-β signal pathway. The synergistic effect of Mg and Zn ions ensure that HGFs cultured on co-implanted samples possessed both high proliferation rate and motility, which are critical to soft tissue sealing of implants.

Abstract Background Lung cancer is the most frequently diagnosed carcinoma and the leading cause of cancer-related mortality. Although molecular targeted therapy and immunotherapy have made great progress, the overall survival (OS) is still poor due to a lack of accurate and available prognostic biomarkers. Therefore, in this study we aimed to establish a multiple-gene panel predicting OS for lung adenocarcinoma. Methods We obtained the mRNA expression and clinical data of lung adenocarcinoma (LUAD) from TCGA database for further integrated bioinformatic analysis. Lasso regression and Cox regression were performed to establish a prognosis model based on a multi-gene panel. A nomogram based on this model was constructed. The receiver operating characteristic (ROC) curve and the Kaplan–Meier curve were used to assess the predicted capacity of the model. The prognosis value of the multi-gene panel was further validated in TCGA-LUAD patients with EGFR, KRAS and TP53 mutation and a dataset from GEO. Gene set enrichment analysis (GSEA) was performed to explore potential biological mechanisms of a novel prognostic gene signature. Results A four-gene panel (including DKK1, GNG7, LDHA, MELTF) was established for LUAD prognostic indicator. The ROC curve revealed good predicted performance in both test cohort (AUC = 0.740) and validation cohort (AUC = 0.752). Each patient was calculated a risk score according to the model based on the four-gene panel. The results showed that the risk score was an independent prognostic factor, and the high-risk group had a worse OS compared with the low-risk group. The nomogram based on this model showed good prediction performance. The four-gene panel was still good predictors for OS in LUAD patients with TP53 and KRAS mutations. GSEA revealed that the four genes may be significantly related to the metabolism of genetic material, especially the regulation of cell cycle pathway. Conclusion Our study proposed a novel four-gene panel to predict the OS of LUAD, which may contribute to predicting prognosis accurately and making the clinical decisions of individual therapy for LUAD patients.

The Cu/γ-Al2O3 catalysts with different Cu loadings were prepared by impregnation method. The physicochemical properties of these Cu/γ-Al2O3 catalysts were characterized by H2-TPR, XRD, and in-situ XPS. The catalytic hydrogenation performances of methyl laurate over Cu/γ-Al2O3 catalysts were studied. The results show that the hydrogenation performances of methyl laurate on Cu/γ-Al2O3 catalyst are related to the dispersion, crystallite size, and content of the active component Cu0. The 10CA catalyst has the best hydrogenation performances for methyl laurate to produce C12 alcohol. At 300 °C, the conversion of methyl laurate and the selectivity of C12 alcohol are 55.6% and 30.4%, respectively.

It is increasingly popular for titanium and its alloys to be utilized as the medical implants. However, their bio-inert nature and lack of antibacterial ability limit their applications. In this work, by utilizing plasma immersion ion implantation and deposition (PIII&D) technology, the titanium surface was modified by C/Cu co-implantation. The mechanical property, corrosion resistance, antibacterial ability and cytocompatibility of modified samples were studied. Results indicate that after C/Cu co-implantation, copper nanoparticles were observed on the surface of titanium, and titanium carbide existed on the near surface region of titanium. The modified surface displayed good mechanical property and corrosion resistance. The Cu/C galvanic corrosion existed on the titanium surface implanted by C/Cu dual ions, and release of copper ions can be effectively controlled by the galvanic corrosion effect. Moreover, improved antibacterial performance of titanium surface can be achieved without cytotoxicity.

Ce-doped LaBO3 (Ce0.05La0.95BO3) and a corresponding incorporation with 3d transition metals (TMs) were prepared and evaluated for eliminating propane. Our results showed the catalytic activity toward propane combustion has a close relationship with the loaded TMs, which promoted oxygen vacancies density and further enhanced the reduction and acidity of this material. This eventually led to 90% propane conversion at 718 K for a Cu-loaded Ce0.05La0.95BO3 catalyst. During 10 h of catalytic propane oxidation, the propane-elimination rate was maintained very well, with no degradation of the catalyst.

Background Cardiac hypertrophy and fibrosis are common adaptive responses to injury and stress, eventually leading to heart failure. Hypoxia signaling is important to the (patho)physiological process of cardiac remodeling. However, the role of endothelial PHD2 (prolyl‐4 hydroxylase 2)/hypoxia inducible factor (HIF) signaling in the pathogenesis of cardiac hypertrophy and heart failure remains elusive. Methods and Results Mice with Egln1Tie2Cre (Tie2‐Cre‐mediated deletion of Egln1 [encoding PHD2]) exhibited left ventricular hypertrophy evident by increased thickness of anterior and posterior wall and left ventricular mass, as well as cardiac fibrosis. Tamoxifen‐induced endothelial Egln1 deletion in adult mice also induced left ventricular hypertrophy and fibrosis. Additionally, we observed a marked decrease of PHD2 expression in heart tissues and cardiovascular endothelial cells from patients with cardiomyopathy. Moreover, genetic ablation of Hif2a but not Hif1a in Egln1Tie2Cre mice normalized cardiac size and function. RNA sequencing analysis also demonstrated HIF‐2α as a critical mediator of signaling related to cardiac hypertrophy and fibrosis. Pharmacological inhibition of HIF‐2α attenuated cardiac hypertrophy and fibrosis in Egln1Tie2Cre mice. Conclusions The present study defines for the first time an unexpected role of endothelial PHD2 deficiency in inducing cardiac hypertrophy and fibrosis in an HIF‐2α–dependent manner. PHD2 was markedly decreased in cardiovascular endothelial cells in patients with cardiomyopathy. Thus, targeting PHD2/HIF‐2α signaling may represent a novel therapeutic approach for the treatment of pathological cardiac hypertrophy and failure.

Aiming at the technical difficulty of poor teeth accuracy of the extruded sun gears, an innovative precision finishing approach was developed as the subsequent process of producing high-quality sun gears, and three finishing tools were designed, namely mandrel with gap, mandrel without gap and interference mandrel. A finite element prediction method was proposed by using the post-processing toolbox of DEFORM software to study the distribution laws of outer and inner teeth deviations of the reshaped sun gear. Moreover, the effects of various precision finishing tools on the formability of sun gear (such as tooth deformation, tool stress and tooth accuracy) were investigated. The results show that the tooth accuracy class of the reshaped outer teeth in profile and helix were seventh and eighth, respectively, and the total M-value error of the inner teeth was decreased to 72.3 μm and the reduction ratio was 73.8% by adopting the interference mandrel, which indicates that the finishing effect of the interference mandrel was better than that of mandrels for both with gap and without gap, and the forming accuracy of the finished teeth could be considerably improved. Therefore, the interference mandrel can be recommended as the optimum finishing tool in the manufacture of precision sun gears. The simulated results were in good agreement with experimental ones within a maximum error of 14.4%, which proves the practicability of the sizing approach and the dependability of the finite element prediction method.

In the past 12 years several studies have screened lists of thousands of chemicals available in the industrial chemical inventories of the European Union, the USA and Canada with the goal of identifying and prioritizing chemicals which are persistent (P), bioaccumulative (B) and toxic (T). Most studies have selected chemicals based on whether their predicted P and B properties and their long-range transport potential exceed guideline thresholds for evaluation of persistent organic pollutants (POPs). A major goal of this study was to review this recent literature on computer-based or ‘in silico’ screening for POPs. A second goal was to review other approaches for finding previously unidentified chemicals of concern including targeted and non-target analytical approaches that might use lists of suspect chemicals developed from ‘in silico’ screening studies. Eight studies were reviewed along with several others which examined the screening process and its uncertainties. From these studies we assembled a list of 3421 chemicals, after removing duplicates and substances already on the Stockholm Convention on POPs. About 52% of these were halogenated, while 48% consisted of a broad range of non-halogenated organics. This list was then further analysed by calculating an overall “POPs score” for transport and accumulation in the Arctic for each substance using predicted partition coefficients, overall persistence, transfer efficiency, and bioaccumulation factor. A shorter list of twenty-five substances was developed based on their POPs score ranking. These substances had not been previously analysed in environmental media but were nevertheless on current or recent chemical inventories indicating significant commercial use. Keywords: Persistent organic pollutants, Persistence, Bioaccumulation, Long-range transport, Non-target screening

The structure, equation of state and transport properties of warm dense nitric oxide (NO) were investigated in wide density and temperature ranges by ab initio molecular dynamics simulations. Both the Perdew–Burke–Ernzerhof (PBE) and the strongly constrained and appropriately normed functional with revised Vydrov–van Voorhis nonlocal correlation (SCAN−rVV10) functionals were used in the simulations, and the pressures predicted by the SCAN−rVV10 functional were found to be systematically lower than those predicted using PBE and experimental data along the shock Hugoniot curve. Along the Hugoniot curve, as density increased, we found that the system transformed towards a mixture of atomic nitrogen and oxygen liquids with molecular NO that remained present up to the highest densities explored. The electrical conductivity along Hugoniot indicated that nonmetal to metal transition had taken place. We also calculated the electrical and thermal conductivities of nitric oxide in the warm dense matter regime, and used them to compute the Lorentz number. In addition, we also report the electronic density of states.

Photocatalytic production from water is considered an effective solution to fossil fuel-related environmental concerns, and photocatalyst surface science holds a significant interest in balancing photocatalysts’ stability and activity. We propose a plasma-wind method to tune the surface properties of a photocatalyst with an amorphous structure. Theoretical calculation shows that the amorphous surface structure can cause an unsaturated coordination environment to adjust the electron distribution, forming more adsorption sites. Thus, the photocatalyst with a crystal–amorphous (C–A) interface can strengthen light absorption, harvest photo-induced electrons, and enrich the active sites, which help improve hydrogen yield. As a proof of concept, with indium sulfide (In2S3) nanosheets used as the catalyst, an impressive hydrogen production rate up to 457.35 μmol cm−2 h−1 has been achieved. Moreover, after plasma-assisted treatment, In2S3 with a C–A interface can produce hydrogen from water under natural outdoor conditions. Following a six-hour test, the rate of photocatalytic hydrogen evolution is found to be 400.50 μmol cm−2 g−1, which demonstrates that a catalyst prepared through plasma treatment is both effective and highly practical.

There are currently no effective treatments for sepsis and acute respiratory distress syndrome (ARDS). The repositioning of existing drugs is one possible effective strategy for the treatment of sepsis and ARDS. We previously showed that vascular repair and the resolution of sepsis-induced inflammatory lung injury is dependent upon endothelial HIF-1α/FoxM1 signaling. The aim of this study was to identify a candidate inducer of HIF-1α/FoxM1 signaling for the treatment of sepsis and ARDS. Employing high throughput screening of a library of 1200 FDA-approved drugs by using hypoxia response element (HRE)-driven luciferase reporter assays, we identified Rabeprazole (also known as Aciphex) as a top HIF-α activator. In cultured human lung microvascular endothelial cells, Rabeprazole induced HIF1A mRNA expression in a dose-dependent manner. A dose-response study of Rabeprazole in a mouse model of endotoxemia-induced inflammatory lung injury identified a dose that was well tolerated and enhanced vascular repair and the resolution of inflammatory lung injury. Rabeprazole treatment resulted in reductions in lung vascular leakage, edema, and neutrophil sequestration and proinflammatory cytokine expression during the repair phrase. We next used Hif1a/Tie2Cre knockout mice and Foxm1/Tie2Cre knockout mice to show that Rabeprazole promoted vascular repair through HIF-1α/FoxM1 signaling. In conclusion, Rabeprazole is a potent inducer of HIF-1α that promotes vascular repair and the resolution of sepsis-induced inflammatory lung injury via endothelial HIF-1α/FoxM1 signaling. This drug therefore represents a promising candidate for repurposing to effectively treat severe sepsis and ARDS.

Objective Chemoresistance is a major problem during hepatocellular carcinoma (HCC) treatment; thus, finding novel chemosensitizers and elucidating the underlying mechanisms that contribute to chemoresistance in HCC is critical. Methods Cell viability assays were used to detect the combined effects of ulinastatin (UTI) and 5-fluorouracil (5-FU) on the proliferation of HCC cells. RT-qPCR, western blot, sphere formation, and aldehyde dehydrogenase 1 (ALDH1) activity assays were used to examine UTI-mediated effects on HCC cell stemness and related mechanisms. Results We constructed 5-FU-resistant HCC cell lines and found that their stemness was higher than parental cells, as evidenced by increased sphere-formation ability, ALDH1 activity, and expression of stemness regulatory genes. While UTI had no effect on the viability of HCC cells, it significantly reduced the stemness of 5-FU-resistant HCC cells, which was determined by decreased sphere-formation capacity, ALDH1 activity, and expression of stemness-related genes. Furthermore, UTI attenuated 5-FU resistance in 5-FU-resistant HCC cells and enhanced the 5-FU sensitivity of parental cells. Mechanistic studies revealed that UTI suppressed the Wnt/β-catenin pathway, which was responsible for the activity of UTI on the stemness of HCC cells. Conclusions UTI enhanced the 5-FU sensitivity of HCC cells by attenuating their stemness via inhibiting Wnt/β-catenin signaling.

An accurate constitutive model is essential for designing the process of hot precision forging and numerical simulation. Based on the isothermal compression tests of as-extruded HMn64–8–5–15 manganese brass alloy at the deformation temperature of 873–1073 K and strain rate of 001–10 s ^−1 , the effect of the friction and deformation temperature rise on the flow stress during the hot compression process was analyzed, and the flow stress curves were corrected. Three constitutive models based on the modified Zerilli-Armstrong, Arrhenius, and a back-propagation neural network (BPNN) optimized by the grey wolf optimization (GWO) algorithm (GWO-BPNN) models were established to describe the high-temperature flow stress of this alloy. Meanwhile, the prediction ability of the three models was evaluated by the calculated values of mean absolute percentage error ( MAPE ) and root mean square error ( RMSE ). The values of MAPE for the modified Zerilli-Armstrong, Arrhenius, and GWO-BPNN models were computed to be, 3139 %, 2448 % and 1265 %, and the values of RMSE were calculated to be 1804, 1482 and 0467 MPa, respectively. The GWO-BPNN model was with the greatest prediction ability for the flow stress among these models. The GWO algorithm was introduced to optimize the initial weights and thresholds of the BPNN model, and it has good prediction accuracy and better stability. It can better describe the high-temperature flow behavior of HMn64–8–5–15 alloy.

Ni/KIT-6 catalysts loaded with different amounts of metallic Ni were prepared by impregnation method. The prepared catalysts and their precursors were investigated through wide- and low-angle XRD, TEM, BET, H2-TPR, and H2-TPD analyzes. The catalytic hydrodeoxygenation performance of the catalysts was evaluated using ethyl acetate as a model bio oil compound. Results indicate that the catalytic hydrodeoxygenation performance of the prepared catalysts was directly related to hydrogen storage properties, hydrogen desorption properties, dispersion of the active component Ni, and so on. The ethyl acetate conversion and ethane selectivity of 25 wt% Ni/KIT-6 catalyst were 100 and 96.8%, respectively, at 300 °C, which shows the best performance. The hydrodeoxygenation activity of ethyl acetate was higher than that of methyl acetate and isopropyl acetate because of the effect of molecular polarity and size. And, this reaction is a structure sensitive reaction. Keywords: Mesoporous Ni-based catalyst, Active Ni species, Pore structure, Hydrodeoxygenation, Ethyl acetate

Abstract Background Humans are exposed to poly- and perfluoroalkyl substances (PFASs) from diverse sources and this has been associated with negative health impacts. Advances in analytical methods have enabled routine detection of more than 15 PFASs in human sera, allowing better profiling of PFAS exposures. The composition of PFASs in human sera reflects the complexity of exposure sources but source identification can be confounded by differences in toxicokinetics affecting uptake, distribution, and elimination. Common PFASs, such as perfluorooctanoic acid (PFOA), perfluorooctane sulfonic acid (PFOS) and their precursors are ubiquitous in multiple exposure sources. However, their composition varies among sources, which may impact associated adverse health effects. Methods We use available PFAS concentrations from several demographic groups in a North Atlantic seafood consuming population (Faroe Islands) to explore whether chemical fingerprints in human sera provide insights into predominant exposure sources. We compare serum PFAS profiles from Faroese individuals to other North American populations to investigate commonalities in potential exposure sources. We compare individuals with similar demographic and physiological characteristics and samples from the same years to reduce confounding by toxicokinetic differences and changing environmental releases. Results Using principal components analysis (PCA) confirmed by hierarchical clustering, we assess variability in serum PFAS concentrations across three Faroese groups. The first principal component (PC)/cluster consists of C9-C12 perfluoroalkyl carboxylates (PFCAs) and is consistent with measured PFAS profiles in consumed seafood. The second PC/cluster includes perfluorohexanesulfonic acid (PFHxS) and the PFOS precursor N-ethyl perfluorooctane sulfonamidoacetate (N-EtFOSAA), which are directly used or metabolized from fluorochemicals in consumer products such as carpet and food packaging. We find that the same compounds are associated with the same exposure sources in two North American populations, suggesting generalizability of results from the Faroese population. Conclusions We conclude that PFAS homologue profiles in serum provide valuable information on major exposure sources. It is essential to compare samples collected at similar time periods and to correct for demographic groups that are highly affected by differences in physiological processes (e.g., pregnancy). Information on PFAS homologue profiles is crucial for attributing adverse health effects to the proper mixtures or individual PFASs.

The excellent suspension stability of the high-viscosity linear polysiloxane magnetorheological fluid (HVLP MRF) makes it a great controlled medium for magnetorheological energy absorbers (MREAs). In our previous work, the Herschel–Bulkley flow model (HB model) was used to describe the shear-thinning rheological behavior and establish the dynamic model of an HVLP MRF-based MREA with radial flow mode. However, as the established model was implicit, the MREA response time increased and the buffer effect was degraded. To improve the time response characteristics, an explicit dynamic model based on the HB model incorporating minor losses (called the E-HBM model) is proposed in this study. The model parameters were identified based on the HBM model. To verify the E-HBM model, five evaluation parameters for the energy absorption performance of the MREA, that is, peak force, mean force, crush force efficiency, specific energy absorption, and stroke efficiency, were introduced to compare the theoretical results with the experimental results obtained using a high-speed drop tower facility with a mass of 600 kg. Then, the relative error of the crush force efficiency, specific energy absorption, and stroke efficiency was quantitatively and comprehensively analyzed considering the E-HBM model and experimental results. The results indicate that the proposed E-HBM model agrees with the impact behavior of the radial flow mode MREA.

Oil and gas wastewater refers to the waste stream produced in special production activities such as drilling and fracturing. This kind of wastewater has the following characteristics: high salinity, high chromaticity, toxic and harmful substances, poor biodegradability, and a difficulty to treat. Interestingly, nanomaterials show great potential in water treatment technology because of their small size, large surface area, and high surface energy. When nanotechnology is combined with membrane treatment materials, nanofiber membranes with a controllable pore size and high porosity can be prepared, which provides more possibilities for oil–water separation. In this review, the important applications of nanomaterials in wastewater treatment, including membrane separation technology and photocatalysis technology, are summarized. Membrane separation technology is mainly manifested in ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO). It also focuses on the application of semiconductor photocatalysis technology induced by TiO2 in the degradation of oil and gas wastewater. Finally, the development trends of nanomaterials in oil and gas wastewater treatment are prospected.

Abstract Background Acute lung injury (ALI) is an inflammatory disorder. Semen Cassiae has potent anti-inflammatory activities. The aim of our study was to investigate whether Semen Cassiae plays a protective effect on lipopolysaccharide (LPS)-induced ALI and, if so, to elucidate its potential mechanism. Methods Male Sprague–Dawley rat lungs were injured by intratracheal instillation of LPS. Rats were treated with Semen Cassiae or vehicle 3 h after LPS challenge. Samples were harvested 24 h post-LPS administration. We also investigated the effects of Semen Cassiae on LPS stimulation in RAW 264.7 cells. Results LPS administration markedly induced pulmonary edema and polymorphonuclear neutrophil influxes. These changes were significantly attenuated in Semen Cassiae treated group. Moreover, Semen Cassiae markedly reduced pulmonary interleukin (IL)-6, tumor necrosis factor (TNF)-α, and 8-hydroxy-2′-deoxyguanosine (8-OHdG) levels. The pulmonary soluble epoxide hydrolase (sEH) activity and the DNA binding activity of Nuclear factor (NF)-κB were significantly inhibited in Semen Cassiae treated group. Furthermore, Semen Cassiae treatment significantly increased epoxyeicosatrienoic acids (EETs), and heme oxygenase-1 (HO-1) activity. Our in vitro study demonstrates that Semen Cassiae treatment may inhibit LPS induced IκBα phosphorylation and NF-κB p65 nucleus translocation. Conclusion Semen Cassiae protects LPS-induced ALI in rats. Semen Cassiae can be developed as a novel treatment for ALI.

Since 2001, twenty-eight halogenated groups of persistent organic pollutants (POPs) have been banned or restricted by the Stockholm Convention. Identifying new POPs among the hundreds of thousands of anthropogenic chemicals is a major challenge that is increasingly being met by state-of-the-art mass spectrometry (MS). The first step to identification of a contaminant molecule (M) is the determination of the type and number of its constituent elements, viz. its elemental composition, from mass-to-charge (m/z) measurements and ratios of isotopic peaks (M + 1, M + 2 etc.). Not every combination of elements is possible. Boundaries exist in compositional space that divides feasible and improbable compositions as well as different chemical classes. This study explores the compositional space boundaries of persistent and bioaccumulative organics. A set of ~305,134 compounds (PubChem) was used to visualize the compositional space occupied by F, Cl, and Br compounds, as defined by m/z and isotope ratios. Persistent bioaccumulative organics, identified by in silico screening of 22,049 commercial chemicals, reside in more constrained regions characterized by a higher degree of halogenation. In contrast, boundaries surrounding non-halogenated chemicals could not be defined. Finally, a script tool (R code) was developed to select potential POPs from high resolution MS data. When applied to household dust (SRM 2585), this approach resulted in the discovery of previously unknown chlorofluoro flame retardants. Keywords: Persistent organic pollutants, Nontargeted screening, Environmental mass spectrometry, Flame retardants, Chemical space

ABSTRACT Kaposi’s sarcoma-associated herpesvirus (KSHV) is a human gammaherpesvirus associated with the development of Kaposi’s sarcoma (KS). KSHV target cells include endothelial cells, B cells, monocytes, epithelial cells, dendritic cells, macrophages, and fibroblasts. KSHV entry into target cells is a complex multistep process and is initiated by the binding and interaction of viral envelope glycoproteins with the cellular receptors. In the current studies, we have found that EphA4 promotes KSHV glycoprotein H/glycoprotein L (gH/gL)-mediated fusion and infection better than does ephrin A2 (EphA2) in HEK293T cells, indicating that EphA4 is a new KSHV entry receptor. To confirm that epithelial cells express EphA2 and EphA4, we analyzed the expression of EphA2 and EphA4 in epithelial cells, endothelial cells, B cells, monocytes, fibroblasts using RNA sequencing (RNA-seq) data analysis of existing data sets. We found that these cell types broadly express both EphA2 and EphA4, with the exception of monocytes and B cells. To confirm EphA4 is important for KSHV fusion and infection, we generated EphA2 and EphA4 single- and double-knockout cells. We found that both EphA2 and EphA4 play a role in KSHV fusion and infection, since EphA2-EphA4 double-knockout cells had the greatest decrease in fusion activity and infection compared to single-knockout cells. Fusion and infection of KSHV were rescued in the EphA2-EphA4 double-knockout cells upon overexpression of EphA2 and/or EphA4. EphA2 binds to both Epstein-Barr virus (EBV) and KSHV gH/gL; however, EphA4 binds only to KSHV gH/gL. Taken together, our results identify EphA4 as a new entry receptor for KSHV. IMPORTANCE The overall entry mechanism for herpesviruses is not completely known, including those for the human gammaherpesviruses Kaposi’s sarcoma-associated herpesvirus (KSHV) and Epstein-Barr virus (EBV). To fully understand the herpesvirus entry process, functional receptors need to be identified. In the current study, we found that EphA4 can also function for a KSHV entry receptor along with EphA2. Interestingly, we found that EphA4 does not function as an entry receptor for EBV, whereas EphA2 does. The discovery of EphA4 as a KSHV entry receptor has important implications for KSHV pathogenesis in humans, may prove useful in understanding the unique pathogenesis of KSHV infection in humans, and may uncover new potential targets that can be used for the development of novel interventional strategies.

Three kinds of modified poly(ethylene terephthalate) (PET) were prepared by solution blending combined with melt post-polycondensation, using 4,4′-thiodiphenol (TDP), 4,4′-oxydiphenol (ODP) and hydroquinone (HQ) as the bisphenols, respectively. The effects of TDP, ODP and HQ on melt post-polycondensation process and crystallization kinetics, melting behaviors, crystallinity and thermal stability of PET/bisphenols complexes were investigated in detail. Excellent chain growth of PET could be achieved by addition of 1 wt% bisphenols, but intrinsic viscosity of modified PET decreased with further bisphenols content. Intermolecular hydrogen bonding between carbonyl groups of PET and hydroxyl groups of bisphenols were verified by Fourier transform infrared spectroscopy. Compare to pure PET, both the crystallization rate and melting temperatures of PET/bisphenols complexes were reduced obviously, suggesting an impeded crystallization and reduced lamellar thickness. Moreover, the structural difference between TDP, ODP and HQ played an important role on crystallization kinetics. It was proposed that the crystallization rate of TDP modified PET was reduced significantly due to the larger amount of rigid benzene ring and larger polarity than that of PET with ODP or HQ. X-ray diffraction results showed that the crystalline structure of PET did not change from the incorporation of bisphenols, but crystallinity of PET decreased with increasing bisphenols content. Thermal stability of modified PET declined slightly, which was hardly affected by the molecular structure of bisphenols.

The constitutive model is still not available for theoretical and engineering analysis of HNi55-7-4-2 alloy, which is a new type of wear-resistant brass alloy widely applied to car synchronizer rings and ship condenser tubes etc. In the current investigation, a friction-corrected stress-strain curve was obtained through a hot-compression test to develop the high-temperature constitutive model of HNi55-7-4-2 alloy based on the Hansel–Spittel model. By comparing predicted flow stress and a simulated force-stroke curve with experimental results, the proposed constitutive model was verified. The developed constitutive model was applied to numerically simulate the hot precision forging of a synchronizer ring. The simulation results based on two process plans on material flow and forging defects were validated by process experiment. The Hansel–Spittel high-temperature constitutive model proposed in this work enables the theoretical and engineering analysis of HNi55-7-4-2 alloy.

The flow behavior of a new kind of high-strength nickel brass used as automobile synchronizer rings was investigated by hot compression tests with a Gleeble-3500 isothermal simulator at strain rates ranging from 0.01 to 10 s−1 and a wide deformation temperature range of 873–1073K at intervals of 50 K. The experimental results show that flow stress increases with increasing strain rate and decreasing deformation temperature, and discontinuous yielding appeared in the flow stress curves at higher strain rates. A modified Arrhenius constitutive model considering the compensation of strain was established to describe the flow behavior of this alloy. A processing map was also constructed with strain of 0.3, 0.6, and 0.9 based on the obtained experimental flow stress–strain data. In addition, the optical microstructure evolution and its connection with the processing map of compressed specimens are discussed. The predominant deformation mechanism of Cu-Ni-Al brass is dynamic recovery when the deformation temperature is lower than 973 K and dynamic recrystallization when the deformation temperature is higher than 973 K according to optical observation. The processing map provides the optimal hot working temperature and strain rate, which is beneficial in choosing technical parameters for this high-strength alloy.

Acute respiratory distress syndrome (ARDS) is characterized by acute hypoxemia respiratory failure, bilateral pulmonary infiltrates, and pulmonary edema of non-cardiac origin. Effective treatments for ARDS patients may arise from experimental studies with translational mouse models of this disease that aim to delineate the mechanisms underlying the disease pathogenesis. Mouse models of ARDS, however, can be limited by their rapid progression from injured to recovery state, which is in contrast to the course of ARDS in humans. Furthermore, current mouse models of ARDS do not recapitulate certain prominent aspects of the pathogenesis of ARDS in humans. In this study, we developed an improved endotoxemic mouse model of ARDS resembling many features of clinical ARDS including extended courses of injury and recovery as well as development of fibrosis following i.p. injection of lipopolysaccharide (LPS) to corn oil-preloaded mice. Compared with mice receiving LPS alone, those receiving corn oil and LPS exhibited extended course of lung injury and repair that occurred over a period of >2 weeks instead of 3-5days. Importantly, LPS challenge of corn oil-preloaded mice resulted in pulmonary fibrosis during the repair phase as often seen in ARDS patients. In summary, this simple novel mouse model of ARDS could represent a valuable experimental tool to elucidate mechanisms that regulate lung injury and repair in ARDS patients.

Three new germacrane sesquiterpenes and a new m-menthane monoterpene were isolated together with four known compounds from the pericarp of Illicium lanceolatum, an adulterant to star anise (Illicium verum). All compounds were isolated from Illicium plants for the first time. The absolute stereochemistry of all germacranes and m-menthane was established by a combination of NMR and the modified Mosher’s ester method. The biological activity was evaluated on SH-SY5Y neuroblastoma cell line. (1S,5R,7R)-1,5-Dihydroxygermacra-4(15),10(14),11(12)-triene (at 62.5 µM) and (1R,5R,7R)-1,5-dihydroxygermacra-4(15),10(14),11(12)-triene (at 15.6 µM) promoted the proliferation of SH-SY5Y by 36.2% and 45.8%, respectively, after 48 h incubation, indicating potential neurotrophic activity.

A series of Ni/KIT6 catalyst precursors with 25 wt.% Ni loading amount were reduced in H2 at 400, 450, 500, and 550 °C, respectively. The studied catalysts were investigated by XRD, Quasi in-situ XPS, BET, TEM, and H2-TPD/Ranalysis methods. It was found that reduction temperature is an important factor affecting the hydrodeoxygenation (HDO) performance of the studied catalysts because of the Strong Metal Support Interaction Effect (SMSI). The reduction temperature influences mainly the content of active components, crystal size, and the abilityfor adsorbing and activating H2. The developed pore structure and large specific surface area of the KIT-6 support favored the Ni dispersion. The RT450 catalyst, which was prepared in H2 atmosphere at 450 °C, has the best HDO performance. Ethyl acetate can be completely transformed and maintain 96.8% ethane selectivity and 3.2% methane selectivity at 300 °C. The calculated apparent activation energies of the prepared catalysts increased in the following order: RT550 > RT400 > RT500 > RT450.

The coalescence of droplets in oil can be implemented rapidly by high-voltage pulse electric field, which is an effective demulsification dehydration technological method. At present, it is widely believed that the main reason of pulse electric field promoting droplets coalescence is the dipole coalescence and oscillation coalescence in pulse electric field, and the optimal coalescence pulse electric field parameters exist. Around the above content, the dynamics of high-voltage pulse electric field promoting the coalescence of emulsified droplets is studied by researchers domestically and abroad. By review, the progress of high-voltage pulse electric field demulsification technology can get a better understanding, which has an effect of throwing a sprat to catch a whale on promoting the industrial application.

It has proved that muscle paralysis was more protective for injured lung in severe acute respiratory distress syndrome (ARDS), but the precise mechanism is not clear. The purpose of this study was to test the hypothesis that abdominal muscle activity during mechanically ventilation increases lung injury in severe ARDS.Eighteen male Beagles were studied under mechanical ventilation with anesthesia. Severe ARDS was induced by repetitive oleic acid infusion. After lung injury, Beagles were randomly assigned into spontaneous breathing group (BIPAPSB) and abdominal muscle paralysis group (BIPAPAP). All groups were ventilated with BIPAP model for 8h, and the high pressure titrated to reached a tidal volume of 6ml/kg, the low pressure was set at 10 cmH2O, with I:E ratio 1:1, and respiratory rate adjusted to a PaCO2 of 35-60 mmHg. Six Beagles without ventilator support comprised the control group. Respiratory variables, end-expiratory volume (EELV) and gas exchange were assessed during mechanical ventilation. The levels of Interleukin (IL)-6, IL-8 in lung tissue and plasma were measured by qRT-PCR and ELISA respectively. Lung injury scores were determined at end of the experiment.For the comparable ventilator setting, as compared with BIPAPSB group, the BIPAPAP group presented higher EELV (427±47 vs. 366±38 ml) and oxygenation index (293±36 vs. 226±31 mmHg), lower levels of IL-6(216.6±48.0 vs. 297.5±71.2 pg/ml) and IL-8(246.8±78.2 vs. 357.5±69.3 pg/ml) in plasma, and lower express levels of IL-6 mRNA (15.0±3.8 vs. 21.2±3.7) and IL-8 mRNA (18.9±6.8 vs. 29.5±7.9) in lung tissues. In addition, less lung histopathology injury were revealed in the BIPAPAP group (22.5±2.0 vs. 25.2±2.1).Abdominal muscle activity during mechanically ventilation is one of the injurious factors in severe ARDS, so abdominal muscle paralysis might be an effective strategy to minimize ventilator-induce lung injury.