Search

This study explores the stability of Al–Si–Ca–Mg-Sc melt foams and investigates the melt foam filling process and the dynamic evolution of pore structures in the fabrication of foam aluminum profiles using the melt transfer foaming technique. The results show that Al–Si–Ca–Mg-Sc melt foam maintains high porosity and a stable pore structure even after 30 min of foaming, without any signs of boundary rupture or destabilization. This stability is attributed to the increased viscosity from finely dispersed second-phase particles, which hinder the growth, coalescence, and drainage of the melt foam. Regarding melt foam filling, enhanced filling capability is achieved by elevating the foaming temperature, extending the foaming time, and increasing the TiH2 addition. The melt foam exhibits a smooth flow from the lower part of the mold to the corners, completing the filling process with well-defined edges in the profile. During lateral movement for filling, a gradual increase in porosity, a decrease in pore number, and a slow enlargement of pore size and standard deviation along the lateral (x-axis) are observed. This is due to the slower liquid phase flow compared to the gas phase, resulting in bubble coalescence. After filling is complete, this phenomenon improves, contributing to a slow and stable evolution of the pore structure.Under optimized conditions of 1.4 wt% TiH2 addition at 600°Cfor 9 min of foaming with Al–Si–Ca–Mg-Sc alloy melting, we successfully fabricated foam aluminum profiles with complete filling, a porosity of 81.5%, an average pore size of 2–3 mm, and a uniform pore structure.

ABSTRACTInterferometric Synthetic Aperture Radar (InSAR) is capable of detecting crust deformation. However, the accuracy is limited by spatiotemporal changes in the lower troposphere. In this paper, we constructed a periodic zenith total delay negative exponential function (PZTD-NEF) model of atmospheric spatiotemporal variation characteristics based on ERA-5 data to alleviate the temporal oscillation bias introduced by tropospheric delay and improve the accuracy of time series InSAR (TS-InSAR) inversion of surface deformation. We evaluated the model’s performance using the phase standard deviation (STD), atmospheric delay correlation coefficient with topography and the spatial structure function. The results were compared with a linear topography-dependent empirical model, generic atmospheric correction online service (GACOS) and ERA-5 methods. Our method reduces the STD of the phase of 83% of the interferograms by 12.8%. For vertical stratification delay correction, the correlation between the proposed method and the Linear, GACOS, and ERA-5 reached 0.734, 0.708, and 0.729, respectively. We found that accounting for spatiotemporal variation characteristics of tropospheric delay can alleviate the seasonal oscillations of vertical stratification delay and improve the accuracy of the deformation time series solution by 40.04%. We also used the Kunming continuous operation reference station system (KMCORS) to verify the displacement results of our method.

The detection of potential rural mountain landslide displacements using time-series interferometric Synthetic Aperture Radar has been challenged by both atmospheric phase screens and decoherence noise. In this study, we propose the use of a combined distributed scatterer (DS) and the Prophet_ZTD-NEF model to rapidly map the landslide surface displacements in Diqing Tibetan Autonomous Prefecture, China. We conducted tests on 28 full-resolution SENTINEL-1A images to validate the effectiveness of our methods. The conclusions are as follows: (1) Under the same sample conditions, confidence interval estimation demonstrated higher performance in identifying SHPs compared to generalized likelihood ratio test. The density of DS points was approximately eight times and five times higher than persistent scatterer interferometry and small baseline subset methods, respectively. (2) The proposed Prophet_ZTD-NEF model considers the spatial and temporal variability properties of tropospheric delays, and the root mean square error of measured values was approximately 1.19 cm instead of 1.58 cm (PZTD-NEF). (3) The proposed Prophet_ZTD-NEF method reduced the mean standard deviation of the corrected interferograms from 1.88 to 1.62 cm and improved the accuracy of the deformation velocity solution by approximately 8.27% compared to Global Position System (GPS) measurements. Finally, we summarized the driving factors contributing to landslide instability.

The widespread use of Light Detection and Ranging (LiDAR) technology has led to a surge in three-dimensional point cloud data; although, it also poses challenges in terms of data storage and indexing. Efficient storage and management of LiDAR data are prerequisites for data processing and analysis for various LiDAR-based scientific applications. Traditional relational database management systems and centralized file storage struggle to meet the storage, scaling, and specific query requirements of massive point cloud data. However, NoSQL databases, known for their scalability, speed, and cost-effectiveness, provide a viable solution. In this study, a 3D point cloud indexing strategy for mobile LiDAR point cloud data that integrates Hilbert curves, R*-trees, and B+-trees was proposed to support MongoDB-based point cloud storage and querying from the following aspects: (1) partitioning the point cloud using an adaptive space partitioning strategy to improve the I/O efficiency and ensure data locality; (2) encoding partitions using Hilbert curves to construct global indices; (3) constructing local indexes (R*-trees) for each point cloud partition so that MongoDB can natively support indexing of point cloud data; and (4) a MongoDB-oriented storage structure design based on a hierarchical indexing structure. We evaluated the efficacy of chunked point cloud data storage with MongoDB for spatial querying and found that the proposed storage strategy provides higher data encoding, index construction and retrieval speeds, and more scalable storage structures to support efficient point cloud spatial query processing compared to many mainstream point cloud indexing strategies and database systems.

Vegetation water content (VWC) is a crucial parameter for evaluating vegetation growth, climate change, natural disasters such as forest fires, and drought prediction. Spaceborne global navigation satellite system reflectometry (GNSS-R) has become a valuable tool for soil moisture (SM) and biomass remote sensing (RS) due to its higher spatial resolution compared with microwave measurements. Although previous studies have confirmed the enormous potential of spaceborne GNSS-R for vegetation monitoring, the utilization of this technology to fuse multiple RS parameters to retrieve VWC is not yet mature. For this purpose, this paper constructs a local high-spatiotemporal-resolution spaceborne GNSS-R VWC retrieval model that integrates key information, such as bistatic radar cross section (BRCS), effective scattering area, CYGNSS variables, and surface auxiliary parameters based on five ensemble machine learning (ML) algorithms (i.e., bagging tree (BT), gradient boosting decision tree (GBDT), extreme gradient boosting (XGBoost), random forest (RF), and light gradient boosting machine (LightGBM)). We extensively tested the performance of different models using SMAP ancillary data as validation data, and the results show that the root mean square errors (RMSEs) of the BT, XGBoost, RF, and LightGBM models in VWC retrieval are better than 0.50 kg/m2. Among them, the BT and RF models performed the best in localized VWC retrieval, with RMSE values of 0.50 kg/m2. Conversely, the XGBoost model exhibits the worst performance, with an RMSE of 0.85 kg/m2. In terms of RMSE, the RF model demonstrates improvements of 70.00%, 52.00%, and 32.00% over the XGBoost, LightGBM, and GBDT models, respectively.

Soil water content is a critical environmental parameter in research and practice, though various technological and contextual constraints limit its estimation in arid areas with vegetation cover. This study combined the multitemporal remote sensing data of Sentinel-1 and Landsat 8 to conduct an inversion study on surface soil water content under low vegetation cover in Nagqu, central Tibetan Plateau. Four vegetation indices (NDVI, ARVI, EVI, and RVI) were extracted from optical remote sensing data. A water cloud model was used to eliminate the influence of the vegetation layer on the backscattering coefficient associated with vegetation cover, and a predictive model suitable for the Nagqu area was constructed. The water cloud model effectively incorporated a vegetation index instead of vegetation water content. We found that VV polarization was more suitable for soil water content inversion than VH polarization. Among the four vegetation indices, the soil water content inversion model constructed with RVI under VV polarization had the best fit (R2 = 0.8212; RMSE = 6.30). The second-best fit was observed for vegetation water content-NDVI (R2 = 0.8201). The soil water content inversion models all had an R2 > 0.6, regardless of the vegetation index used, though the RVI had the best fitting effect, indicating that this vegetation index is highly applicable in the water cloud model, as a substitute for vegetation water content, and is expected to perform well in similar study sites.

AbstractInSAR technology provides a powerful tool for detecting large-scale surface deformation. In particular, the newly developed DS-InSAR method fused PS points has obvious advantages in monitoring bare land and vegetation covered areas, but at present, there is a lack of effectiveness evaluation of this method. Therefore, this paper takes Hongta District of Yuxi City as an example. The 29 scenes sentinel-1A data from January 2019 to December 2019 were processed and analyzed using the DS-InSAR method fused PS points. The research results show that the position and deformation trend of the inversion results of the three methods are highly consistent, the correlation between DS-InSAR method fused PS points and PS- InSAR and SBAS-InSAR methods is 0.9473 and 0.8583, respectively. But the spatial density of the measurement points (MPs) obtained by the DS-InSAR method of PS points is 11 times and 4 times that of the PS-InSAR method and SBAS-InSAR method respectively. It clearly shows that DS-InSAR method fused PS points has greater advantages than PS-InSAR and SBAS-InSAR methods in deformation mapping displacement, because the MPs density is higher. It is conducive to the detailed analysis of the spatio-temporal characteristics and deformation mechanism of deformation.

Improving the accuracy of zenith tropospheric delay (ZTD) models is an important task. However, the existing ZTD models still have limitations, such as a lack of appropriate vertical adjustment function and being unsuitable for China, which has a complex climate and great undulating terrain. A new approach that considers the time-varying vertical adjustment and delicate diurnal variations of ZTD was introduced to develop a new grid ZTD model (NGZTD). The NGZTD model employed the Gaussian function and considered the seasonal variations of Gaussian coefficients to express the vertical variations of ZTD. The effectiveness of vertical interpolation for the vertical adjustment model (NGZTD-H) was validated. The root mean squared errors (RMSE) of the NGZTD-H model improved by 58% and 22% compared to the global pressure and temperature 3 (GPT3) model using ERA5 and radiosonde data, respectively. The NGZTD model’s effectiveness for directly estimating the ZTD was validated. The NGZTD model improved by 22% and 31% compared to the GPT3 model using GNSS-derived ZTD and layered ZTD at radiosonde stations, respectively. Seasonal variations in Gaussian coefficients need to be considered. Using constant Gaussian coefficients will generate large errors. The NGZTD model exhibited outstanding advantages in capturing diurnal variations and adapting to undulating terrain. We analyzed and discussed the main error sources of the NGZTD model using validation of spatial interpolation accuracy. This new ZTD model has potential applications in enhancing the reliability of navigation, positioning, and interferometric synthetic aperture radar (InSAR) measurements and is recommended to promote the development of space geodesy techniques.

The presence of abundant spatio-temporal information based on the location of mobile objects in publicly accessible GPS mobile devices makes it crucial to collect, analyze, and mine such information. Therefore, it is necessary to index a large volume of trajectory data to facilitate efficient trajectory retrieval and access. It is difficult for existing indexing methods that primarily rely on data-driven indexing structures (such as R-Tree) or space-driven indexing structures (such as Quadtree) to support efficient analysis and computation of data based on spatio-temporal range queries as a service basis, especially when applied to massive trajectory data. In this study, we propose a massive GPS data storage and indexing method based on uneven spatial segmentation and trajectory optimization segmentation. Primarily, the method divides GPS trajectories in a large spatio-temporal data space into multiple MBR sequences by greedy algorithm. Then, a hybrid indexing model for segmented trajectories is constructed to form a global spatio-temporal segmentation scheme, called HHBITS index, to achieve hierarchical organization of trajectory data. Eventually, a spatio-temporal range query processing method is proposed based on this index. This paper implements and evaluates the index in MongoDB and compares it with two other spatio-temporal composite indexes for performing spatio-temporal range queries efficiently. The experimental results show that the method in this paper has high performance in responding to spatio-temporal queries on large-scale trajectory data.

SAR imagery plays a crucial role in geological and environmental monitoring, particularly in highland mountainous regions. However, inherent geometric distortions in SAR images often undermine the precision of remote sensing analyses. Accurately identifying and classifying these distortions is key to analyzing their origins and enhancing the quality and accuracy of monitoring efforts. While the layover and shadow map (LSM) approach is commonly utilized to identify distortions, it falls short in classifying subtle ones. This study introduces a novel LSM ground-range slope (LG) method, tailored for the refined identification of minor distortions to augment the LSM approach. We implemented the LG method on Sentinel-1 SAR imagery from the tri-junction area where the Xiaojiang, Pudu, and Jinsha rivers converge at the Yunnan-Sichuan border. By comparing effective monitoring-point densities, we evaluated and validated traditional methods—LSM, R-Index, and P-NG—against the LG method. The LG method demonstrates superior performance in discriminating subtle distortions within complex terrains through its secondary classification process, which allows for precise and comprehensive recognition of geometric distortions. Furthermore, our research examines the impact of varying slope parameters during the classification process on the accuracy of distortion identification. This study addresses significant gaps in recognizing geometric distortions and lays a foundation for more precise SAR imagery analysis in complex geographic settings.

Cellulose aerogels have great prospects for noise reduction applications due to their sustainable value and superior 3D interconnected porous structures. The drying principle is a crucial factor in the preparation process for developing high-performance aerogels, particularly with respect to achieving high acoustic absorption properties. In this study, multifunctional cellulose nanocrystal (CNC) aerogels were conveniently prepared using two distinct freeze-drying principles: refrigerator conventional freezing (RCF) and liquid nitrogen unidirectional freezing (LnUF). The results indicate that the rapid RCF process resulted in a denser CNC aerogel structure with disordered larger pores, causing a stronger compressive performance (Young’s modulus of 40 kPa). On the contrary, the LnUF process constructed ordered structures of CNC aerogels with a lower bulk density (0.03 g/cm3) and smaller apertures, resulting in better thermal stability, higher diffuse reflection across visible light, and especially increased acoustic absorption performance at low–mid frequencies (600–3000 Hz). Moreover, the dissipation mechanism of sound energy in the fabricated CNC aerogels is predicted by a designed porous media model. This work not only paves the way for optimizing the performance of aerogels through structure control, but also provides a new perspective for developing sustainable and efficient acoustic absorptive materials for a wide range of applications.

In recent years, landslides occurred frequently in mountain and gorge areas, which brought serious threats to people's life and property safety. Most scholars use SAR single-track data for early identification of landslides in alpine and canyon areas, but some landslides cannot be identified due to geometric distortion of SAR imaging, and the identification results are not comprehensive. In order to carry out comprehensive and accurate early identification of landslide hazards in alpine valley area, this paper adopts bas-INSAR technology, takes the deep cut alpine valley area along the Xiaojiang River in Dongchuan as the research area, and adopts the combination of SAR data of lifting and lowering orbit to identify landslide hazards, and introduces high-resolution optical images as auxiliary identification. Finally, 18 landslide disaster bodies were identified, among which 5 were high-risk potential landslides, and three types of typical potential landslides were analyzed. The analysis results show that the use of elevator rail SAR data combined with complementary way, can effectively avoid the SAR single orbital data geometric distortion problem in mountain valley area, at the same time, this method can more accurately comprehensively to early identification of alpine valley area of landslide hazard, the cause of disaster prevention and mitigation and government decision-making provides a effective means.

The tropospheric delay caused by the temporal and spatial variation of meteorological parameters is the main error source in interferometric synthetic aperture radar (InSAR) applications for geodesy. To minimize the impact of tropospheric delay errors, it is necessary to select the appropriate tropospheric delay correction method for different regions. In this study, the interferogram results of the InSAR, corrected for tropospheric delay using the Linear, Generic Atmospheric Correction Online Service for InSAR (GACOS) and ERA-5 atmospheric reanalysis dataset (ERA5) methods, are presented for the study area of the junction of the Hengduan Mountains and the Yunnan–Kweichow Plateau, which is significantly influenced by the plateau monsoon climate. Four representative regions, Eryuan, Binchuan, Dali, and Yangbi, are selected for the study and analysis. The phase standard deviation (STD), phase–height correlation, and global navigation satellite system (GNSS) data were used to evaluate the effect of tropospheric delay correction by integrating topographic, seasonal, and meteorological factors. The results show that all three methods can attenuate the tropospheric delay, but the correction effect varies with spatial and temporal characteristics.

Zhaotong City in Yunnan Province is one of the largest apple growing bases in China. However, the terrain of Zhaotong City is complicated, and the rainy weather is more frequent, which brings difficulties to the identification of apple orchards by remote sensing. In this paper, an improved spectral angle feature is proposed by combining the Spectral Angle Mapper and Sentinel-1 data. Based on the Google Earth Engine and Sentinel image, a random forest classifier was used to extract apple orchards in the Ganhe Reservoir area, Zhaoyang District, Zhaotong City, which provides a theoretical basis for extracting the spatial distribution and sustainable development of the local apple industry. The classification results show that the improved spectral angle characteristics can improve the overall accuracy and F1 score of apple orchards. The RGB band combined with NDVI, GLCM, and improved spectral angle features obtained the most favorable results, and the F1 score and overall accuracy were 88.89% and 84.44%, respectively, which proved the reliability of the method in identifying apple orchards in Zhaotong City.

Landslides are one of the most common geological disasters in China, characterized by suddenness and uncertainty. Traditional methods are not sufficient for the accurate identification, early warning, and forecasting of landslide disasters. As high-resolution remote sensing satellites and interferometric synthetic aperture radar (InSAR) surface deformation monitoring technology have been leaping forward, the traditional methods of landslide monitoring data sources are limited, and there have been few effective methods to excavate the characteristics of the spatial distribution of landslide hazards and their triggering factors, etc. In this study, an area extending 10 km from the VII isobar of the Gengma earthquake was taken as the study area, and 13 evaluation factors were screened out by integrating the factors of InSAR surface deformation, topography, and geological environment. Landslide susceptibility was evaluated through the Bayesian optimized convolutional neural network (BO-CNN), and the Bayesian optimized random forests (BO-RF) and particle swarm optimization support vector machines (PSO-SVM) models were selected for comparative analyses. The accuracy of the model was evaluated by using three indices, including the ROC curve, the AUC value, and the FR value. Specifically, the ROC curves of PSO-SVM, BO-RF, and BO-CNN were close to the upper-left corner, indicating excellent model performance. Moreover, the AUC values were computed as 0.9388, 0.9529, and 0.9535, respectively, and the FR value of landslides in the high susceptibility area of BO-CNN reached up to 14.9 and exceeded those of PSO-SVM and BO-RF, respectively. Furthermore, the mentioned values of the SVM and BO-RF models were 4.55 and 3.69 higher. The experimental results indicated that, compared with other models, the BO-CNN model used in this study had a better effect on landslide susceptibility evaluation, and the research results are of great significance to the disaster prevention and mitigation measures of local governments.

The nano-Ni-Al2O3/A356 nanocomposites prepared with nickel-plating, stir casting, and equal channel angle semi-solid extrusion (ECASE). The microstructure, tensile property, and fracture morphology of the fabricated nanocomposites have been investigated. The microstructure observation showed the nickel-plating could stimulate nucleation and break nanoparticle aggregation, resulting the matrix grains in a smaller size (63 μm) and the nanoparticles more uniform located on the grain boundary. The ECASE could further refine the grains size (23 μm) and improve the nanoparticle dispersion. Although 5 passes refine the grains to 16 μm, it would cause the particles to re-agglomerate, due to the nanoparticles exist in the semi-solid liquid phase for a long time. The fabricated nanocomposites exhibited an enhancement in both strength and ductility, about 1.2–2.5 times higher than those of the corresponding aluminum matrix composites. Due to the Orowan strengthening and fine grain strengthening, i.e., increased the number of grain boundaries and improved the resistance of particles to cooperative grain deformation. Meanwhile, the ECASE eliminated the intergranular defects and improved the grain boundary bonding. The enhanced mechanical properties of the nanocomposites were attributed to the grain boundary control increased by the nickel-plating and ECASE. The grain boundary control, such as increasing the grain boundary number, improving the particle-matrix adhesion and particle dispersion, can be applied to the development of high mechanical properties aluminum matrix composites.

To extract blue roofs (BRs) from remote sensing images quickly, first, this study used WorldView-2 and WorldView-3 as the data sources and created a new BR spectral area model (BRSAM) using the polygon area difference between the spectral curves of BRs and other image categories in bands 2–8. Then the extraction effect of BRSAM with those of the blue ground object spectral index (BGOSI), blue object spectrum index (BOSI) and maximum likelihood classification was compared; the results showed that BRSAM overcomes the shortcomings of BGOSI and BOSI, i.e. erroneously extracted shadow and white and yellow ground objects as BRs. However, BRSAM has the disadvantage of erroneously extracting some vegetation and green plastic playground as BRs. Considering that the disadvantage of one of BRSAM, BGOSI, and BOSI in extracting BRs can be compensated by the two other spectral models/indices, we combined the three spectral models/indices and used the synthetic spectral model to extract BRs. Notably, the synthetic spectral model overcomes the shortcomings of the three spectral models in BR extraction, and its effect is better than any one of them separately used. Meanwhile, the spectral model/index method used in BR extraction is better than the classification method. The spectral model/index method is a convenient and effective method for BR extraction, which could be used as a reference in the classification of other data.

AlCa75 with equal Ca content was used to replace pure Ca for the preparation of AlSi12 foam in a stable pore structure after foaming for 20 min. The stability mechanism was studied based on the comparison between the macroscopic pore structure evolution and the second phase composition of AlCa75 and pure Ca aluminum foam. It was found that the porosity and average pore size of the AlSi12 foam with AlCa75 were stable without any abnormal large pores, and the foaming stage was prominent. The stability of AlSi12 foam with pure Ca is inferior. After 20 min of foaming, the foam bursts in the center. Combined with the microscopic characteristic analysis, it could see that the second phase produced by AlCa75 is mainly Al2Si2Ca, which can be uniformly dispersed in the matrix. The addition of pure Ca reduces the amount of the second phase and the main phase Al4Ca is easy to agglomerate. The stability mechanism shows that the Al2Si2Ca second phase, formed by AlCa75, demonstrates a better stabilizing effect in different foaming stages. Due to the premature agglomeration caused by Al4Ca and the low content of the second phase, the AlSi12 foam with pure Ca is challenging to long-term stability.

In this paper, a method for joint sea surface rainfall intensity (RI), wind speed, and wave height retrieval based on spaceborne global navigation satellite system reflectometry (GNSS-R) data is proposed, which especially considers the effects between these two parameters. A method of rainfall detection (RD) according to different wind speed ranges is also proposed by mitigating the impact of swell and wind speed. The results, with data collected over the oceans near Southeast Asia, show that the RD method has a detection accuracy of up to 81.74%. The RI retrieval accuracy can reach about 2 mm/h by simultaneously correcting the effects of wind speed and swell. The accuracy of wind speed retrieval is improved by about 5% after removing rainfall interference through RD in advance. After considering the influence of wind speed and eliminating rainfall interference, the retrieval accuracy of significant wave height (SWH) is improved by about 18%. Finally, the deep convolutional neural network (DCNN) model is built to estimate the SWH of the swell. The results show that the retrieval accuracy of the swell height is better than 0.20 m after excluding rainfall interference. The proposed joint retrieval method provides an important reference for the future acquisition of multiple high-precision marine geophysical parameters by spaceborne GNSS-R technology.

During routine bridge maintenance, edge detection allows the partial condition of the bridge to be viewed. However, many edge detection methods often have unsatisfactory performances when dealing with images with complex backgrounds. Moreover, the processing often involves the manual selection of thresholds, which can result in repeated testing and comparisons. To address these problems in this paper, the wavelet transform modulus maxima method is used to detect the target image, and then the threshold value of the image can be determined automatically according to the OTSU method to remove the pseudo-edges. Thus, the real image edges can be detected. The results show that the information entropy and SSIM of the detection results are the highest when compared with the commonly used Canny and Laplace algorithms, which means that the detection quality is optimal. To more fully illustrate the advantages of the algorithms, images with more complex backgrounds were detected and the processing results of the algorithms in this paper are still optimal. In addition, the automatic selection of thresholds saves the operator’s effort and improves the detection efficiency. Thanks to the combined use of the above two methods, detection quality and efficiency are significantly improved, which has a good application in engineering practice.

Multi-temporal interferometric synthetic aperture radar (MT-InSAR) techniques analyze a study area using a set of SAR image data composed of time series, reaching millimeter surface subsidence accuracy. To effectively acquire the subsidence information in low-coherence areas without obvious features in non-urban areas, an MT-InSAR technique, called SqueeSAR, is proposed to improve the density of the subsidence points in the study area by fusing the distributed scatterers (DS). However, SqueeSAR filters the DS points individually during spatial adaptive filtering, which requires significant computer memory, which leads to low processing efficiency, and faces great challenges in large-area InSAR processing. We propose a spatially adaptive filtering parallelization strategy based on the Spark distributed computing engine in a Hadoop distributed cluster environment, which splits the different DS pixel point data into different computing nodes for parallel processing and effectively improves the filtering algorithm’s performance. To evaluate the effectiveness and accuracy of the proposed method, we conducted a performance evaluation and accuracy verification in and around the main city of Kunming with the original Sentinel-1A SLC data provided by ESA. Additionally, parallel calculation was performed in a YARN cluster comprising three computing nodes, which improved the performance of the filtering algorithm by a factor of 2.15, without affecting the filtering accuracy.

Kunming city is located in the middle of Yunnan Province. Due to large-scale groundwater exploitation and urban development in recent years, this area has been affected by surface subsidence. In this paper, Interferometric Synthetic Aperture Radar (InSAR) and Global Navigation Satellite System (GNSS) data are used to monitor the surface subsidence in Kunming city area for better analysis and understanding. The study used data of Sentinel-1A from 2018 to 2020 with atmospheric correction based on GACOS to calculate the average annual subsidence rate in Kunming city area, and the results show that the maximum subsidence rate is 48 mm/year. The subsidence obtained by InSAR is compared with the vertical deformation information obtained by eight GNSS stations in continuous operation in the study area. The subsidence rate trend show by the two methods is consistent, which further verifies the validity of InSAR data to reflect the local deformation. Experimental results shown that the eastern and northeastern Dianchi lake areas were affected by underground resources mining, and the induced surface subsidence characteristics were obvious, with the surface subsidence rate reachde 48 mm/year and 37 mm/year respectively. The Kunyang Phosphate Mine also had different degrees of mining subsidence disaster, with the maximum subsidence rate reached 36 mm/year. The subsidence rate of InSAR and GNSS has the same trend on the whole. However, GNSS sites are generally located in stable areas, the settlement amount obtained in the same time period is somewhat different from that of InSAR.

We employed ascending and descending Sentinel-1A, optical image data, and field investigation methods to identify and monitor landslides in the Jinsha River Basin to overcome the difficulties associated with the use of a single method and its inaccuracies in identifying landslides in the alpine and canyon areas. Using distributed scatterer-synthetic aperture radar interferometry (DS-InSAR), Sentinel-1A ascending and descending data were integrated to obtain surface deformation information within the study area from July 2017 to May 2019. Thereafter, high-resolution optical image data were introduced to interpret landslides, and field investigations were conducted to validate landslides. These combined methods enabled the assessment of spatiotemporal evolutionary characteristics, and their accuracy in identifying typical landslides was verified. The results showed that the use of both ascending and descending data effectively avoided certain problems, such as the inability to identify certain landslide hazards or the retrieval of incomplete identification results due to geometric distortion associated with single-track SAR imaging. The combined use of these methods effectively improves the timeliness and verification of the accuracy of landslides. Fifteen landslides were identified in the study area, which had different degrees of tension cracks, vertical dislocations, and slip marks that were verified in the field. Of these, two landslides show serious deformation characteristics that currently pose a serious threat to lives and infrastructure. Follow-up monitoring of these landslides is essential. These findings will assist in obtaining comprehensive information about the distribution of landslides and their deformation developmental trends in the Ahai Reservoir area of the Jinsha River Basin and show that the combined methods can be employed to prevent and control landslides in this area.

Time-series interferometric synthetic aperture radar (TS-InSAR) is often affected by tropospheric artifacts caused by temporal and spatial variability in the atmospheric refractive index. Conventional temporal and spatial filtering cannot effectively distinguish topography-related stratified delays, leading to biased estimates of the deformation phases. Here, we propose a TS-InSAR atmospheric delay correction method based on ERA-5; the robustness and accuracy of ERA-5 data under the influence of different atmospheric delays were explored. Notably, (1) wet delay was the main factor affecting tropospheric delay within the interferogram; the higher spatial and temporal resolution of ERA-5 can capture the wet delay signal better than MERRA-2. (2) The proposed method can mitigate the atmospheric delay component in the interferogram; the average standard deviation (STD) reduction for the Radarsat-2 and Sentinel-1A interferograms were 19.68 and 14.75%, respectively. (3) Compared to the empirical linear model, the correlation between the stratified delays estimated by the two methods reached 0.73. We applied this method for the first time to a ground subsidence study in the Yuxi Basin and successfully detected three subsidence centers. We analyzed and discussed ground deformation causes based on rainfall and fault zones. Finally, we verified the accuracy of the proposed method by using leveling monitoring data.

In order to prepare stainless steel foams (SSFs) with high specific strength, cost-effective performance, and multiple relative density ranges, this work used CaCl2 as a space holder to prepare 304 and 430 SSF samples with different relative densities using the powder metallurgy method. The microstructure and the properties were compared and analyzed by optical microscope (OM), scanning electron microscope (SEM), energy dispersive spectrometer (EDS), X-ray diffraction (XRD), and a universal testing machine. The results show that the matrix of 304 SSFs is austenite and 430 is ferrite. In the quasi-static compression test, when the relative density was in the range of 0.33~0.12, their compressive strength increased with the relative density increasing; the maximum compressive strength of 304 SSFs reached 40.29 MPa and that of 430 SSFs was 49.79 MPa. While the compressive strength of 430 SSFs is significantly higher than 304 SSFs at a similar relative density, 304 SSFs show better stability in the plastic deformation stage. When the deformation reached densification, the maximum energy absorption value of 304 SSFs reached 15.94 MJ/m3, while 430 SSFs was 22.70 MJ/m3. The energy absorption value increased with the relative density increasing, and 430 SSFs exhibited a higher energy absorption capacity than 304 SSFs.