Search

The purpose of this experiment was to study the effects of different levels of Clostridium butyricum supplementation on the gas production, fermentation parameters, and nutrient digestibility in TMR diet by in vitro gas production method, so as to determine the appropriate amount of Clostridium butyricum supplementation in beef cattle diet. Holstein steers with permanent fistula were selected as rumen fluid donors and TMR as culture substrate. The control group (CON group) only contained the culture substrate, while the Clostridium butyricum test group added Clostridium butyricum with the concentrations of 2x108 (CB1 group), 4x108 (CB2 group), 6x108 (CB3 group), 8x108 (CB4 group) and 10x108 CFU/kg (CB5 group) on the basis of the culture substrate, with six replicates at each level. The results showed that the in vitro gas production of CB1 group was significantly lower than that of other groups when the fermentation time was 2 h and 4 h (P<0.05). When the fermentation time was 12 h, the in vitro gas production of CB3 group, CB2 group, CB4 group, and CB5 group was significantly higher than that of CON group and CB1 group (P<0.05). The pH value in each experimental group were significantly lower than those in CON group (P<0.05), while the content of ammonia nitrogen (NH3-N) was significantly higher than that in CON group (P<0.05), and there was no significant difference among the experimental groups (P>0.05). The concentrations of acetic acid, propionic acid, and total acid in CB3 group, CB4 group and CB5 group were significantly higher than those in CON group (P<0.05). Isobutyric acid content in CB1 group, CB2 group and CB3 group was significantly higher than that in CON group (P<0.05). Dry matter digestibility (DMD) and neutral detergent fiber degradation (NDFD) of each experimental group were significantly higher than those of CON group (P<0.05). The degradation rate of acid detergent fiber (ADFD) in CB2 group was significantly higher than that in CON group (P<0.05). The study indicates that the addition of Clostridium butyricum can increase gas production, NH3-N, acetic acid, propionic acid, total volatile acid content and DMD. The suitable addition of Clostridium butyricum is 6x108 CFU/kg. [ABSTRACT FROM AUTHOR]

Metal–organic frameworks (MOFs) have great potential for producing photoelectrocatalyzed hydrogen and degrading pollutants, owing to several factors such as high porosity and tunable semiconductor-like properties. Wide band gaps, which restrict their use to only UV light induced reactions, and low efficiencies for the separation of photogenerated charge carriers (electrons and holes) pose significant challenges to the widespread applications of MOFs. In this study, a hierarchical hollow Pt@H-UiO-66-NH2/CdS ternary catalyst was designed and synthesized. The immobilized CdS nanoparticles (NPs) in this catalyst endow the MOF H-UiO-66-NH2 with high visible light absorption ability and the Pt NPs serve as electron sinks to improve charge carrier separation. Furthermore, the hierarchical hollow structure of H-UiO-66-NH2 in the composite contributes to boosting light absorption and shortening the distance for charge transfer. As a proof of principle, Pt@H-UiO-66-NH2/CdS catalyzes methylene blue (MB) degradation with a high rate constant of 1.025 × 10−2 and hydrogen production with a rate of 12 810 μmol g−1 h−1, the latter of which is about 2.3, 11.7 and 173 times higher than those of Pt@UiO-66-NH2/CdS, H-UiO-66-NH2/CdS and Pt@H-UiO-66-NH2, respectively. [ABSTRACT FROM AUTHOR]

CeO-CuO catalysts were prepared by citric acid method at different calcination temperatures. The purpose of this study is to investigate the influence of calcination temperature on the catalytic activity of CeO2-CuO catalyst for the selective catalytic reduction of NO with NH3. As can be seen from the results, Ce-Cu(450) is of the best low temperature selective catalytic reduction (SCR) activity among the three catalysts, which may be resulted from its large surface area, good redox ability, strong NH3 adsorption capacity, and high concentration of Cu2+ and active oxygen species on the surface. © 2013 American Institute of Chemical Engineers Environ Prog, 33: 385-389, 2014 [ABSTRACT FROM AUTHOR]

The absorption process of NO into KMnO4/(NH4)2CO3 solutions was studied in a stirred tank reactor. The experimental results showed that the reaction process was a fast pseudo-m reaction. The reaction between NO and aqueous solutions of KMnO4/(NH4)2CO3 was found to be first-order with respect to NO and with respect to KMnO4. The frequency factor and the average activation energy of this reaction were 2.3 × 109 m3/(mol s) and 36.77 kJ/mol, respectively. © 2012 American Institute of Chemical Engineers Environ Prog, 32: 564-568, 2013 [ABSTRACT FROM AUTHOR]

Absorption experiments of NO2 from simulated flue gas into aqueous (NH4)2SO3 solution were performed in a stirred tank reactor under atmosphere pressure. As can be seen from the experimental results, the absorption rate of NO2 into (NH4)2SO3 solution increases as the (NH4)2SO3 concentration increases from 0.01 to 0.06 mol/L. As the concentration of (NH4)2SO3 solution exceeds 0.06 mol/L, the absorption process becomes gas-film controlled. And the absorption rate increases with increasing NO2 inlet concentration but decreases with increasing reaction temperature. Compared with Na2SO3 solution, (NH4)2SO3 solution has higher NO2 absorption rate. © 2012 American Institute of Chemical Engineers Environ Prog, 32: 465-469, 2013 [ABSTRACT FROM AUTHOR]

To explore the method of explants directly induced bud and establish the tissue culture system of mutiple shoot by means of direct organogenesis, core bud and daughter bulbs (the top of bud stem expanded to form daughter bulb) of T. edulis were used as explants and treated with thidiazuron (TDZ) and 1-naphthlcetic acid (NAA). The results showed that the optimal medium for bud inducted form core bud and daughter bulb were MS + TDZ 2.0 mg x L(-1) + NAA 4.0 mg x L(-1) and MS +TDZ 2.0 mg x L(-1) + NAA 2.0 mg x L(-1) respectively, both of them had a bud induction rate of 72.92%, 79.22%. The optimal medium for cluster buds multiplication was MS + TDZ 0.2 mg x L(-1) + NAA 0.2 mg x L(-1), and proliferation coefficient was 2.23. After proliferation, cluster buds rooting occurred on MS medium with IBA 1.0 mg x L(-1) and the rooting rate was 52.6%, three to five seedlings in each plant. Using core bud and daughter bulb of T. edulis, the optimum medium for adventitious bud directly inducted from daughter bulb, core bud and cluster bud multiplication were screened out and the tissue culture system of multiple shoot by means of direct organogenesis was established.