Search

Residual diclofenac sodium (DS) in the environment is harmful to human health. A promising method for DS removal is the use of adsorbents functionalized with amino groups that can form an ionic bond with the carboxyl group of DS at a suitable pH. In this work, a novel composite adsorbent composed of cellulose nanocrystals (CNC) and chitosan (CS) has been synthesized and functionalized by ethylenediamine (ED) in both layers. Characterization methods, including scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectrometry, and X-ray photoelectron spectroscopy, were used to confirm the morphology and synthetic mechanism of the double- amino-functionalized adsorbent. Based on the optimization of adsorption conditions and modeling of the adsorption mechanism, the DS adsorption process on CNC-ED@CS-ED involves chemical adsorption, and the maximum adsorption capacity obtained from the Langmuir model is 444.44 mg/g. CNC-ED@CS-ED exhibits good adsorption capacity and high sustainability; thus, it is a promising composite material for the removal of DS from wastewater.

The present study was focused on the preparation and characterization of the antioxidant peptides by microwave-assisted enzymatic hydrolysis of collagen from sea cucumber Acaudina molpadioides (ASC-Am) obtained from Zhejiang Province in China. The results exhibited the effects of microwave irradiation on hydrolysis of ASC-Am with different protease. Neutrase was selected from the four common proteases (papain, pepsin, trypsin, and neutrase) based on the highest content and DPPH scavenging activity of hydrolysate Fa (Molecular weight &lt, 1 kDa). The content and 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity of Fa obtained by hydrolysis of neutrase increased by 100% and 109% respectively at a microwave power of 300 W compared with no microwave irradiation. Five subfractions were obtained after performing the gel filtration chromatography, and the Fa.2 exhibited the highest DPPH scavenging activity. The amino acid analysis showed that the contents of Glutamic acid, Alanine, Tyrosine, and Phenylalanine in fraction Fa.2 increased significantly, but an obvious decrease in the content of Glycine was observed compared to Fa. Four peptides (Fa.2-A, Fa.2-B, Fa.2-C, and Fa.2-D) were purified from Fa.2 by high performance liquid chromatography, and Fa.2-C showed the highest DPPH scavenging activity. The sequence of Fa.2-C was identified as Phenylalanine-Leucine- Alanine-Proline with a half elimination ratio (EC50) of 0.385 mg/mL. The antioxidant activity of Fa.2-C was probably attributed to the small molecular sizes and the presence of hydrophobic amino acid residues in its sequence. This report provided a promising method for the preparation of antioxidant peptides from collagen for food and medicinal purposes.

In recent years, with the development of the system integration technology, the outside integrative special vehicles, such as big oil tank, trucks loading with dangerous goods and so on, are becoming more and more important. When the vehicle is under way, it will inevitably encounter the nature environment, including lightning. If the lightning strikes directly or very close to the vehicle, the lightning-induced effects will be very destructive. Therefore, for a better understanding of the lightning-induced effects produced on the special vehicle by the lightning strike, the research on lightning-induced effects of a special vehicle for aerospace system transportation was proposed. In the paper, a numerical simulation model for the special vehicle is established, the lightning-induced effects are analyzed successfully by using tramsmission-line matrix (TLM) algorithm, and the experiment validation example is also implemented. By comparing the numerical simulation with the actual experiment results, the correctness trend of the numerical simulation is validated and a mass of invaluable research data is obtained, which has a deep significance on the lightning research in our country.

Orthogonal design has been used for optimization of the separation and determination of two active components (pair of isomers) in a traditional Chinese medicinal preparation by capillary electrophoresis. The concentration of borate and SDS, the organic modifier content and buffer pH were selected as variable parameters. Their different effects on peak resolution were studied by the design method. Optimized separation conditions were obtained and successfully applied for the first time to the separation and determination of imperatorin and isoimperatorin inYuanhu Zhiteng tablets within 7 min in a pH 8 buffer system: 25 mM borate, 15 mM SDS and 5% acetonitrile, detection at 214 nm. In addition, application of an artificial neural network with “4-7-1” structure to the prediction of peak resolution of the two active components given by uniform design was also examined and the predicted results were in good agreement with experimental values.

For the first time, Crystal Violet (CV) was used to determine nucleic acid concentrations using the resonance light-scattering (RLS) technique. Based on the enhancement of the RLS of CV by nucleic acids, a new quantitative determination method for nucleic acids in aqueous solutions has been developed. At pH 5.03 and ionic strength 0.005 mol kg-1, the interaction of CV with nucleic acids results in three characteristic RLS peaks at 344.0, 483.0 and 666.0 nm. With 4.0 x 10(-5) mol l-1 of CV, linear relationships were found between the enhanced intensity of RLS at 666.0 nm and the concentration of nucleic acids in the range 0-2.5 micrograms ml-1 for herring sperm DNA, 0-4.0 micrograms ml-1 for calf thymus DNA and 0-4.5 micrograms ml-1 for yeast RNA. The limits of determination were 13.8 ng ml-1 for herring sperm DNA, 36.8 ng ml-1 for calf thymus DNA and 69.0 ng ml-1 for yeast RNA. The assay is convenient, rapid, inexpensive and simple.