Search

In this paper, highly dispersed hierarchical coral spheres of CeO2/ZnO have been constructed through a facile template-free hydrothermal strategy, followed by an annealing treatment. The resulting coral spheres exhibit enhanced activity for acetone sensing compared with CeO2 or ZnO as well as excellent cyclability and long-term stability. At the optimum working temperature of 245 °C, by controlling the ratio of Ce/Zn, the highest response of the coral spheres towards 100 ppm acetone is up to 145, which is about 5.5 times that of ZnO coral spheres. The significantly improved gas sensing activity may be ascribed to the well-dispersed and assembled CeO2 nanoparticles on the surface of ZnO coral spheres and the heterojunctions between CeO2 and ZnO, which produced abundant oxygen vacancies in the CeO2/ZnO coral spheres. [ABSTRACT FROM AUTHOR]

The development of high-efficiency multi-component composite anode nanomaterials for sodium-ion batteries (SIBs) is critical for advancing the further practical application. Numerous multi-component nanomaterials are constructed typically via confinement strategies of surface templating or three-dimensional encapsulation. Herein, a composite of heterostructural multiple sulfides (MoS2/SnS/CoS) well-dispersed on graphene is prepared as an anode nanomaterial for SIBs, via a distinctive lattice confinement effect of a ternary CoMoSn-layered double-hydroxide (CoMoSn-LDH) precursor. Electrochemical testing demonstrates that the composite delivers a high-reversible capacity (627.6 mA h g−1 after 100 cycles at 0.1 A g−1) and high rate capacity of 304.9 mA h g−1 after 1000 cycles at 5.0 A g−1, outperforming those of the counterparts of single-, bi- and mixed sulfides. Furthermore, the enhancement is elucidated experimentally by the dominant capacitive contribution and low charge-transfer resistance. The precursor-based lattice confinement strategy could be effective for constructing uniform composites as anode nanomaterials for electrochemical energy storage. [ABSTRACT FROM AUTHOR]

Rational construction of low-cost and high-performance electrocatalysts for water splitting is crucial for the advancement of renewable hydrogen fuel. Hybridizing heterojunctions or noble metals is one typical strategy used to boost the electrocatalytic performance for either the oxygen evolution reaction (OER) or hydrogen evolution reaction (HER). Here, low-content CeOx (3.74 wt%) is introduced into Ni3Fe nanoparticle-encapsulated carbon nanotubes (Ni3Fe@CNTs/CeOx), with both the OER and HER activities boosted, as a bifunctional electrocatalyst for overall water splitting. The composite is derived by pyrolyzing a mixture of melamine/ternary NiFeCe-layered double hydroxide. The composite electrocatalyst requires low overpotentials of 195 and 125 mV at 10 mA cm−2 in 1.0 M KOH, respectively, which are superior to those of Ni3Fe@CNTs/NF (313 and 139 mV) and CeOx/NF (345 and 129 mV), and in particular, OER overpotentials of 320 and 370 mV at 50 and 100 mA cm−2, respectively. Moreover, the composite-assembled electrolyzer for overall water splitting requires a current density of 10 mA cm−2 at a decent cell voltage of 1.641 V. Furthermore, the enhancement is elucidated by the synergistic effect: the dual role of CeOx in boosting the OER and HER, the highly conductive carbonaceous CNTs, large electrochemically active surface area and low charge-transfer resistance. The results can offer an effective route for designing and preparing low-cost and high-efficiency electrocatalysts for electrocatalytic water splitting. [ABSTRACT FROM AUTHOR]

Rational construction of nanosized anode nanomaterials is crucial to enhance the electrochemical performance of lithium-/sodium-ion batteries (LIBs/SIBs). Various anode nanoparticles are created mainly via templating surface confinement, or encapsulation within precursors (such as metal–organic frameworks). Herein, low-content SnO2 nanodots on N-doped reduced graphene oxide (SnO2@N-rGO) were prepared as anode nanomaterials for LIBs and SIBs, via a distinctive lattice confinement of a CoAlSn-layered double hydroxide (CoAlSn-LDH) precursor. The SnO2@N-rGO composite exhibits the advantagous features of low-content (17.9 wt%) and uniform SnO2 nanodots (3.0 ± 0.5 nm) resulting from the lattice confinement of the Co and Al species to the surrounded Sn within the same crystalline layer, and high-content conductive rGO. The SnO2@N-rGO composite delivers a highly reversible capacity of 1146.2 mA h g−1 after 100 cycles at 0.1 A g−1 for LIBs, and 387 mA h g−1 after 100 cycles at 0.1 A g−1 for SIBs, outperforming N-rGO. Furthermore, the dominant capacitive contribution and the rapid electronic and ionic transfer, as well as small volume variation, all give rise to the enhancement. Precursor-based lattice confinement could thus be an effective strategy for designing and preparing uniform nanodots as anode nanomaterials for electrochemical energy storage. [ABSTRACT FROM AUTHOR]

Transition-metal layered oxides (such as P2-Na2/3Ni1/3Mn2/3O2) are suggested as one type of the most potential cathode candidates for sodium ion batteries (SIBs) owing to their high capacity and low cost; however, they suffer from the structural damage and sluggish Na+ kinetics resulting from the undesirable phase transformation of P2−O2 and the Na+/vacancy ordering, respectively. Herein, a Mg/Ti co-doped P2-Na0.67Ni0.28Mg0.05Mn0.62Ti0.05O2 layered oxide is demonstrated as a high-efficiency cathode material for SIBs. The cathode delivers a high reversible capacity of 135.5 mAh g−1, good cycling stability (82.7 mAh g−1 upon 100 cycles at 0.1C), and an attractive energy density of 479.4 Wh Kg−1. Furthermore, the phase transition from the undesirable P2−O2 to the reversible P2−OP4 demonstrated by in situ XRD and the partially suppressed Na+/vacancy ordering as well as the improved electronic and ionic conductivities all give rise to the enhancement. These results show the important role of cationic co-doping in designing and preparing high-efficiency layered oxide cathode materials for SIBs. [ABSTRACT FROM AUTHOR]