Search

ITER Vacuum Vessel (VV) is made of double walls connected by ribs structure and flexible housings. Space between these walls is filled up with In Wall Shielding (IWS) blocks to (1) shield neutrons streaming out of plasma and (2) reduce toroidal magnetic field ripple. These blocks will be connected to the VV through a supporting structure of Support Rib (SR) and Lower Bracket (LB) assembly. SR and LB are two independent components manufactured from SS 316L(N)-IG, Total 1584 support ribs and 3168 lower bracket of different sizes and shapes will be manufactured for the IWS. Two lower brackets will be welded with one support rib to make an assembly. The welding between SR and LB is a full penetration welding. Total 1584 assemblies of different sizes and shapes will be manufactured. Sufficient experience gained from manufacturing and testing of mock ups, final manufacturing of IWS support rib and lower bracket has been started at the site of IWS manufacturer M/s. Avasarala Technologies Limited (ATL). This paper will describe, optimization of water jet cutting speed on IWS material, selection criteria for K type weld joint, unique features of fixture of assembly, manufacturing of Mock ups, and welding processes with NDTs.

The Pre-Series Cryoline (PTCL) for ITER is a representative cryoline from the complicated network of all cryolines for the ITER project. It is ~28 m in length with same cross-section (1:1) including main line (ML) and branch line (BL) as of ITER torus & cryostat cryoline. Geometrically; it has bends at different angles i.e. 90°, 120°, 135° & 160° comprising T-section & Z-section. The PTCL has been fabricated in 5 different elements based on the installation feasibility. The mechanical & instrumentation installation like sensors mounting, displacement sensors, etc. has been completed. The PTCL test has been performed after complete installation of PTCL and integration with the existing test facility at ITER-India cryogenics laboratory in order to verify the thermal performance and mechanical integrity. The primary objectives, which are evaluated during the PTCL test, are (i) Thermal performance of the PTCL (ii) Measurement of temperature profile on thermal shield of PTCL, (iii) Stress measurement at critical locations, (iv) Measurement of Outer Vacuum Jacket (OVJ) temperature during Break of Insulation Vacuum (BIV) test. The paper will summarize the methodology and observed results of PTCL.