Search

We report quantum efficiency (QE) enhancements in accelerator technology relevant antimonide photocathodes (K2CsSb) by interfacing them with atomically thin two-dimensional (2D) crystal layers. The enhancement occurs in a reflection mode, when a 2D crystal is placed in between the photocathodes and optically reflective substrates. Specifically, the peak QE at 405 nm (3.1 eV) increases by a relative 10 percent, while the long wavelength response at 633 nm (2.0 eV) increases by a relative 36 percent on average and up to 80 percent at localized hot spot regions when photocathodes are deposited onto graphene coated stainless steel. There is a similar effect for photocathodes deposited on hexagonal boron nitride monolayer coatings using nickel substrates. The enhancement does not occur when reflective substrates are replaced with optically transparent sapphire. Optical transmission, X-ray diffraction (XRD) and X-ray fluorescence (XRF) revealed that thickness, crystal orientation, quality and elemental stoichiometry of photocathodes do not appreciably change due to 2D crystal coatings. These results suggest optical interactions are responsible for the QE enhancements when 2D crystal sublayers are present on reflective substrates, and provide a pathway toward a simple method of QE enhancement in semiconductor photocathodes by an atomically thin 2D crystal on substrates., Comment: Accepted for publication in Physica Status Solidi A: Applications and Materials Science

We study spatial photoluminescence characteristics of neutral and charged excitons across extended monolayer MoS$_2$ synthesized by chemical vapor deposition. Using two-dimensional hyperspectral photoluminescence mapping at cryogenic temperatures we identify regions with increased emission from charged excitons associated with both spin-orbit split valence subbands. Such regions are attributed to unintentional doping at defect sites with excess charge that bind neutral excitons to form defect-pinned trions. Our findings imply comparable timescales for the formation, relaxation, and radiative decay of $B$ trions, and add defect-localized $A$ and $B$ trions to the realm of photoexcited quasiparticles in layered semiconductors.

Transition metal dichalcogenide semiconductors represent elementary components of layered heterostructures for emergent technologies beyond conventional opto-electronics. In their monolayer form they host electrons with quantized circular motion and associated valley polarization and valley coherence as key elements of opto-valleytronic functionality. Here, we introduce two-dimensional polarimetry as means of direct imaging of the valley pseudospin degree of freedom in monolayer transition metal dichalcogenides. Using MoS$_2$ as a representative material with valley-selective optical transitions, we establish quantitative image analysis for polarimetric maps of extended crystals, and identify valley polarization and valley coherence as sensitive probes of crystalline disorder. Moreover, we find site-dependent thermal and non-thermal regimes of valley-polarized excitons in perpendicular magnetic fields. Finally, we demonstrate the potential of wide-field polarimetry for rapid inspection of opto-valleytronic devices based on atomically thin semiconductors and heterostructures.

A direct band gap, remarkable light-matter coupling as well as strong spin-orbit and Coulomb interaction establish two-dimensional (2D) crystals of transition metal dichalcogenides (TMDs) as an emerging material class for fundamental studies as well as novel technological concepts. Valley selective optical excitation allows for optoelectronic applications based on the momentum of excitons. In addition to lattice imperfections and disorder, scattering by phonons is a significant mechanism for valley depolarization and decoherence in TMDs at elevated temperatures preventing high-temperature valley polarization required for realistic applications. Thus, a detailed knowledge about strength and nature of the interaction of excitons with phonons is vital. We directly access exciton-phonon coupling in charge tunable single layer MoS2 devices by polarization resolved Raman spectroscopy. We observe a strong defect mediated coupling between the long-range oscillating electric field induced by the longitudinal optical (LO) phonon in the dipolar medium and the exciton. We find that this so-called Fr\"ohlich exciton LO-phonon interaction is suppressed by doping. This suppression correlates with a distinct increase of the degree of valley polarization of up to 20 % even at elevated temperatures of 220 K. Our result demonstrates a promising strategy to increase the degree of valley polarization towards room temperature valleytronic applications., Comment: 18 pages, 3 figures, SI

Atomically thin crystals of transition metal dichalcogenides (TMDs) host excitons with strong binding energies and sizable light-matter interactions. Coupled to optical cavities, monolayer TMDs routinely reach the regime of strong light-matter coupling, where excitons and photons admix coherently to form quasiparticles known as polaritons up to room temperature. Here, we explore the two-dimensional nature of TMD polaritons with cavity-assisted hyperspectral imaging. Using extended WS$_2$ monolayers, we establish the regime of strong coupling with a scanning microcavity to map out polariton properties and correlate their spatial features with intrinsic and extrinsic effects. We find a high level of homogeneity, and show that polariton splitting variations are correlated with intrinsic exciton properties such as oscillator strength and linewidth. Moreover, we observe a deviation from thermal equilibrium in the resonant polariton population, which we ascribe to non-perturbative polariton-phonon coupling. Our measurements reveal a promisingly consistent polariton landscape, and highlight the importance of phonons for future polaritonic devices., Comment: 10 pages, 7 figures

We report successful deposition of high quantum efficiency (QE) bialkali antimonide K2CsSb photocathodes on graphene films. The results pave a pathway towards an ultimate goal of encapsulating technologically-relevant photocathodes for accelerator technology with an atomically-thin protecting layer to enhance lifetime while minimizing QE losses. A QE of 17 % at ~3.1 eV (405 nm) is the highest value reported so far on graphene substrates and is comparable to that obtained on stainless steel and nickel reference substrates. The spectral responses of the photocathodes on graphene exhibit signature features of K2CsSb including the characteristic absorption at ~2.5 eV. Materials characterization based on X-ray fluorescence (XRF) and X-ray diffraction (XRD) reveals that the composition and crystal quality of these photocathodes deposited on graphene is comparable to those deposited on a reference substrate. Quantitative agreement between optical calculations and QE measurements for the K2CsSb on free suspended graphene and a graphene coated metal substrate further confirms the high quality interface between the photocathodes and graphene. Finally, a correlation between the QE and graphene quality as characterized by Raman spectroscopy suggests that a lower density of atomistic defects in the graphene films leads to higher QE of the deposited K2CsSb photocathodes., Comment: accepted to Advanced Materials Interfaces

Monolayer (ML) transition metal dichalcogenides (TMDs) integrated in optical microcavities host exciton-polaritons as a hallmark of the strong light-matter coupling regime. Analogous concepts for hybrid light-matter systems employing spatially indirect excitons with a permanent electric dipole moment in heterobilayer (HBL) crystals promise realizations of exciton-polariton gases and condensates with immanent dipolar interactions. Here, we identify optical signatures of spatially indirect momentum-bright and momentum-dark interlayer excitons in vertical MoSe$_2$-WSe$_2$ heterostructures and implement cavity-control of both exciton manifolds. Our experiments quantify the strength of light-matter coupling for both zero and finite momentum excitons residing in Moir\'{e} superlattices of TMD HBLs and demonstrate that both exciton species are susceptible to Purcell enhancement in cavity-modified photonic environments. Our results form the basis for further developments of dipolar exciton-polariton gases and condensates in hybrid cavity -- van der Waals heterostructure systems.

The hexagonal structure of graphene gives rise to the property of gas impermeability, motivating its investigation for a new application: protection of semiconductor photocathodes in electron accelerators. These materials are extremely susceptible to degradation in efficiency through multiple mechanisms related to contamination from the local imperfect vacuum environment of the host photoinjector. Few-layer graphene has been predicted to permit a modified photoemission response of protected photocathode surfaces, and recent experiments of single-layer graphene on copper have begun to confirm these predictions for single crystal metallic photocathodes. Unlike metallic photoemitters, the integration of an ultra-thin graphene barrier film with conventional semiconductor photocathode growth processes is not straightforward. A first step toward addressing this challenge is the growth and characterization of technologically relevant, high quantum efficiency bialkali photocathodes grown on ultra-thin free-standing graphene substrates. Photocathode growth on free-standing graphene provides the opportunity to integrate these two materials and study their interaction. Specifically, spectral response features and photoemission stability of cathodes grown on graphene substrates are compared to those deposited on established substrates. In addition we observed an increase of work function for the graphene encapsulated bialkali photocathode surfaces, which is predicted by our calculations. The results provide a unique demonstration of bialkali photocathodes on free-standing substrates, and indicate promise towards our goal of fabricating high-performance graphene encapsulated photocathodes with enhanced lifetime for accelerator applications., Comment: 21 pages, 5 figures, accepted to npj 2D Materials and Applications

We report valence band electronic structure evolution of graphene oxide (GO) upon its thermal reduction. Degree of oxygen functionalization was controlled by annealing temperatures, and an electronic structure evolution was monitored using real-time ultraviolet photoelectron spectroscopy. We observed a drastic increase in density of states around the Fermi level upon thermal annealing at ~600 oC. The result indicates that while there is an apparent band gap for GO prior to a thermal reduction, the gap closes after an annealing around that temperature. This trend of band gap closure was correlated with electrical, chemical, and structural properties to determine a set of GO material properties that is optimal for optoelectronics. The results revealed that annealing at a temperature of ~500 oC leads to the desired properties, demonstrated by a uniform and an order of magnitude enhanced photocurrent map of an individual GO sheet compared to as-synthesized counterpart., Comment: 9 pages, 4 figures in physica status solidi (a) 2016

A fundamental understanding of the intrinsic optoelectronic properties of atomically thin transition metal dichalcogenides (TMDs) is crucial for its integration into high performance semiconductor devices. Here, we investigate the transport properties of chemical vapor deposition (CVD) grown monolayer molybdenum disulfide (MoS2) under photo-excitation using correlated scanning photocurrent microscopy and photoluminescence imaging. We examined the effect of local phase transformation underneath the metal electrodes on the generation of photocurrent across the channel length with diffraction-limited spatial resolution. While maximum photocurrent generation occurs at the Schottky contacts of semiconducting (2H-phase) MoS2, after the metallic phase transformation (1T-phase), the photocurrent peak is observed towards the center of the device channel, suggesting a strong reduction of native Schottky barriers. Analysis using the bias and position dependence of the photocurrent indicates that the Schottky barrier heights are few meV for 1T- and ~200 meV for 2H-contacted devices. We also demonstrate that a reduction of native Schottky barriers in a 1T device enhances the photo responsivity by more than one order of magnitude, a crucial parameter in achieving high performance optoelectronic devices. The obtained results pave a pathway for the fundamental understanding of intrinsic optoelectronic properties of atomically thin TMDs where Ohmic contacts are necessary for achieving high efficiency devices with low power consumption., Comment: 20 pages, 6 figures, 8 pages of supporting information, accepted to ACS Nano

Encapsulation of electronic devices based on organic materials that are prone to degradation even under normal atmospheric conditions with hermetic barriers is crucial for increasing their lifetime. A challenge is to develop 'ultrabarriers' that are impermeable, flexible, and preferably transparent. Another important requirement is that they must be compatible with organic electronics fabrication schemes (i.e. must be solution processable, deposited at room temperature and be chemically inert). Here, we report lifetime increase of 1,300 hours for poly(3-hexylthiophene) (P3HT) films encapsulated by uniform and continuous thin (~10 nm) films of reduced graphene oxide (rGO). This level of protection against oxygen and water vapor diffusion is substantially better than conventional polymeric barriers such as CytopTM, which degrades after only 350 hours despite being 400 nm thick. Analysis using atomic force microscopy, x-ray photoelectron spectroscopy and high resolution transmission electron microscopy suggest that the superior oxygen gas/moisture barrier property of rGO is due to the close interlayer distance packing and absence of pinholes within the impermeable sheets. These material properties can be correlated to the enhanced lag time of 500 hours. Our results provide new insight for the design of high performance and solution processable transparent 'ultrabarriers' for a wide range of encapsulation applications., Comment: Advanced Energy Materials (2013)

The ability to efficiently evolve hydrogen via electrocatalysis at low overpotentials holds tremendous promise for clean energy. Hydrogen evolution reaction (HER) can be easily achieved from water if a voltage above the thermodynamic potential of the HER is applied. Large overpotentials are energetically inefficient but can be lowered with expensive platinum based catalysts. Replacement of Pt with inexpensive, earth abundant electrocatalysts would be significantly beneficial for clean and efficient hydrogen evolution. Towards this end, promising HER characteristics have been reported using 2H (trigonal prismatic) XS2 (where X = Mo or W) nanoparticles with a high concentration of metallic edges as electrocatalysts. The key challenges for HER with XS2 are increasing the number and catalytic activity of active sites. Here we report atomically thin nanosheets of chemically exfoliated WS2 as efficient catalysts for hydrogen evolution with very low overpotentials. Atomic-resolution transmission electron microscopy and spectroscopy analyses indicate that enhanced electrocatalytic activity of WS2 is associated with high concentration of strained metallic 1T (octahedral) phase in the as-exfoliated nanosheets. Density functional theory calculations reveal that the presence of strain in the 1T phase leads to an enhancement of the density of states at the Fermi level and increases the catalytic activity of the WS2 nanosheet. Our results suggest that chemically exfoliated WS2 nanosheets could be interesting catalysts for hydrogen evolution., Comment: 23 pages, 3 figures

Few-layer graphene (FLG) is grown on copper and nickel substrates at high rates using a novel flame synthesis method in open-atmosphere environments. Transmittance and resistance properties of the transferred films are similar to those grown by other methods, but the concentration of oxygen, as assessed by XPS, is actually less than that for CVD-grown graphene under near vacuum conditions. The method involves utilizing a multi-element inverse-diffusion-flame burner, where post-flame species and temperatures are radially-uniform upon deposition at a substrate. Advantages of the flame synthesis method are scalability for large-area surface coverage, increased growth rates, high purity and yield, continuous processing, and reduced costs due to efficient use of fuel as both heat source and reagent. Additionally, by adjusting local growth conditions, other carbon nanostructures (i.e. nanotubes) are readily synthesized., Comment: 21 pages, 8 figures

Point sources exhibit low threshold electron emission due to local field enhancement at the tip. The development and implementation of tip emitters have been hampered by the need to position them sufficiently apart to achieve field enhancement, limiting the number of emission sites and therefore the overall current. Here we report low threshold field (< 0.1V/um) emission of multiple electron beams from atomically thin edges of reduced graphene oxide (rGO). Field emission microscopy (FEM) measurements show evidence for interference from emission sites that are separated by a few nanometers, suggesting that the emitted electron beams may be coherent. Based on our high-resolution transmission electron microscopy, infrared spectroscopy and simulation results, field emission from the rGO edge is attributed to a stable and unique aggregation of oxygen groups in the form of cyclic edge ethers. Such closely spaced electron beams from rGO offer prospects for novel applications and understanding the physics of linear electron sources., Comment: 20 pages, 4 figures, Submitted

The deposition of atomically thin highly uniform chemically derived graphene (CDG) films on 300 mm SiO2/Si wafers is reported. We demonstrate that the very thin films can be lifted off to form uniform membranes than can be free-standing or transferred onto any substrate. Detailed maps of thickness using Raman spectroscopy and atomic force microscopy (AFM) height profiles reveal that the film thickness is very uniform and highly controllable, ranging from 1-2 layers up to 30 layers. After reduction using a variety of methods, the CDG films are transparent and electrically active with FET devices yielding exceptionally high mobilities of ~ 15 cm2/Vs and sheet resistance of ~ 1 k Ohm/sq at ~ 70 % transparency., Comment: 11 pages, 4 figures. accepted to ACS Nano

Experimental evidence explaining the extremely low-threshold electron emission from diamond reported in 1996 has been obtained for the first time. Direct observation using combined ultraviolet photoelectron spectroscopy/field emission spectroscopy (UPS/FES) proved that the origin of field-induced electron emission from heavily nitrogen (N)-doped chemical vapour deposited (CVD) diamond was at conduction band minimum (CBM) utilising negative electron affinity (NEA). The significance of the result is that not only does it prove the utilisation of NEA as the dominant factor for the extremely low-threshold electron emission from heavily N-doped CVD diamond, but also strongly implies that such low-threshold emission is possible from other types of diamond, and even other materials having NEA surface. The low-threshold voltage, along with the stable intensity and remarkably narrow energy width, suggests that this type of electron emission can be applied to develop a next generation vacuum nano-electronic devices with long lifetime and high energy resolution., Comment: 17 pages, 4 figures, Phys. Rev. B in press

Fluorescent organic compounds are of significant importance to the development of low-cost opto-electronic devices. Blue fluorescence from aromatic or olefinic molecules and their derivatives is particularly important for display and lighting applications. Thin film deposition of low-molecular-weight fluorescent organic compounds typically requires costly vacuum evaporation systems. On the other hand, solution-processable polymeric counterparts generally luminesce at longer wavelengths due to larger delocalization in the chain. Blue light emission from solution-processed materials is therefore of unique technological significance. Here we report near-UV to blue photoluminescence (PL) from solution-processed graphene oxide (GO). The characteristics of the PL and its dependence on the reduction of GO indicates that it originates from the recombination of electron-hole (e-h) pairs localized within small sp2 carbon clusters embedded within an sp3 matrix. These results suggest that a sheet of graphene provides a parent structure on which fluorescent components can be chemically engineered without losing the macroscopic structural integrity. Our findings offer a unique route towards solution-processable opto-electronics devices with graphene., Comment: Accepted for publication in Adv. Mater

Transport properties of progressively reduced graphene oxide (GO) are described. Evolution of the electronic properties reveals that as-synthesized GO undergoes insulator-semiconductor-semi-metal transitions with reduction. The apparent transport gap ranges from 10 ~ 50 meV and approaches zero with extensive reduction. Measurements at varying degrees of reduction reveal that transport in reduced GO occurs via variable-range hopping and further reduction leads to increased number of available hopping sites., Comment: 9 pages, 4 figures