Search

In this study, the effects of five common oxidative decontaminating agents (H2O2 solution, ClO2 solution, NaClO solution, ozonated water and slightly acidic electrolytic water) on the bacterial decontamination of tilapia fillets and their influence on the texture, color and myofibrillar protein (MP) oxidation in tilapia fillets were investigated. The results showed that a decontamination rate of 80% was attained by immersion in 1 500 mg/L H2O2 solution for 8 min, 200 mg/L ClO2 solution for 10 min, 200 mg/L NaClO solution for 10 min, 9 mg/L ozonated water for 10 min, or 30 mg/L slightly acidic electrolytic water for 20 min. Compared with the control group, treatment with decontaminating agents increased the hardness and L* value of tilapia fillets, decreased the a* value, MP content, total sulfhydryl group content, and raised the content of carbonyl groups and the amount of surface hydrophobic groups. The degree of protein denaturation in the slightly acidic electrolytic water and NaClO solution groups was the highest; the fluorescence intensity of MP was decreased after decontamination treatments, with the greatest decrease being found in the slightly acidic electrolytic water-treated group; the relative contents of α-helix and β-turn in MP were decreased, while the relative contents of β-fold and random coil were increased, with the most significant changes in the secondary structure of MP being observed in the slightly acidic electrolytic water-treated group (P < 0.05). MP underwent degradation to different extents, and the degradation degree of the slightly acidic electrolytic water group was higher than that of the other treatment groups. In summary, the oxidation of fish MP occurred to varying degrees after oxidative decontamination treatments, with slightly acidic electrolytic water treatment having the strongest oxidative effect.

The use of carbon fiber–reinforced polymer (CFRP) grid-reinforced engineered cementitious composite (CFGRE) systems to strengthen concrete-filled steel tubes (CFSTs) offers potential to improve the structural response as well as the resistance to high temperatures and corrosion. This study consists of an experimental investigation on the behavior of eccentrically loaded square CFSTs strengthened with CFGRE systems. Nineteen specimens were tested using a compression-testing machine with loads, deformations, and recorded test observations. The investigated parameters included the number of CFRP grid layers, width-to-thickness ratio of a steel tube, concrete strength grade, and eccentric ratio. The strengthened columns exhibited ductile failure. Due to stress concentrations, the CFGRE systems ruptured at the corners on the compression side. After strengthening, the yielding and ultimate loads of the CFST columns increased from 21.8% to 53.5% and 21.1% to 34.9%, respectively. Although an increase in the number of CFRP grid layers did not significantly affect the bearing capacities of the square specimens, it significantly enhanced the ductility of the columns. An increase in the eccentric ratio weakened the confining effect. An average decrease of 9.7%, 27.6%, and 41.4% was observed in the ultimate loads of the strengthened columns when the eccentric ratio increased from 0 to 0.1, 0.25, and 0.4, respectively. A five-point N–M interaction model was developed based on the principles of force equilibrium and deformation compatibility to predict the eccentric bearing capacities of strengthened columns. The prediction results exhibited high accuracy. [ABSTRACT FROM AUTHOR]

Carbide tools are extensively used in the automotive, aerospace, and marine industries. However, an unsuitable tool-edge treatment can affect the cutting performance of carbide tools. In the tool-cutting process, the cutting edge radius is one of the major factors that affect the cutting force, temperature, and quality. In this study, a cutting simulation model of carbide inserts was used to analyze the effect of the cutting edge radius on the cutting performance. The cutting edge radii of the inserts were prepared using shear-thickening polishing methods, followed by cutting experiments. The accuracy of the cutting simulation model was verified through cutting experiments. The simulation results showed that under low-speed cutting conditions, the cutting force and temperature tended to increase with an increase in the cutting edge radius, and the cutting temperature was less affected by the cutting edge radius. The results of the cutting force and cutting temperature obtained from the experiment and simulation were consistent; therefore, the cutting simulation model was verified to be reliable. The results indicate that modeling cutting simulation is a promising research method for predicting the cutting performance of tools. [ABSTRACT FROM AUTHOR]