Search

Polyploidization is hypothesized to improve the freezing resistance of plants in cold regions. However, adaptive strategies and key physiological mechanisms involved in the freezing resistant ability of polyploids remain unclear. In Actinidia chinensis (kiwifruits), the tetraploids and hexaploids occupy higher altitude habitats with colder climates than the diploids, providing a study system to investigate mechanisms responsible for differentiation in freezing resistance between cytotypes. We characterized environmental conditions of their natural distribution areas, and measured leaf‐level traits of cold damages and water relations at typical sites of each cytotype along an altitudinal gradient. Polyploids showed lower semi‐lethal temperature (LT50) than ice nucleation temperature (INT), reflecting a tolerance strategy to cope with freezing events in the plateau regions. More negative turgor loss points and larger cell elastic modulus of polyploids could help to alleviate damages from freezing‐induced cell dehydration, thus strengthening their tolerance to lower subzero temperatures (lower LT50). The increased supercooling capacity of polyploids (lower INT) might correlate with less extracellular ice formation due to lower osmotic potential at full turgor, apoplastic water fraction and tissue capacitance. Our study uncovers a greater cold tolerance in polyploid kiwifruits than diploids, and suggests the potential linkage between freezing tolerance and water relations. Taken together, such a divergence in stress resistance may underlie the niche shift of polyploid plants towards harsh environments. [ABSTRACT FROM AUTHOR]

Competitive interactions drive critical ecological processes in plant communities. Yet, how competitive interactions are influenced by polyploidy that has a widespread incidence in plants remains largely unknown.To evaluate the hypothesis of competitive asymmetry between polyploids and diploids, we competed tetraploid and diploid plants of perennial herbaceous Chrysanthemum indicum L. (Asteraceae) at different relative frequencies under contrasting soil water contents. We quantified the interaction intensity between competing plants of the same (intraploidy) and different ploidy levels (interploidy), and measured functional traits related to gas exchange and plant water use to understand the underlying mechanisms.The stronger competitive effect of tetraploids on diploids than that of diploids on tetraploids provided evidence for the competitive asymmetry. As a stronger competitor, tetraploids were limited more by individuals of their own than by diploids. Such competitive asymmetry was not only maintained under reduced soil water content, but also translated into higher above‐ground biomass of tetraploids. Tetraploids showed more resource‐acquisitive traits than diploids under high soil water content and more resource‐conservative traits under reduced soil water content. As such, the higher trait plasticity in tetraploids than diploids likely explained the competitive asymmetry.Synthesis. These results elucidate the nature and magnitude of species interactions between polyploid and diploid plants under changing environments and the underlying mechanisms, and provide important insights into the prevalence and persistence of polyploid plants under a changing climate. [ABSTRACT FROM AUTHOR]

The food habits of Rhinopithecus bieti were studied at Mt. Longma in Tianchi Nature Reserve, Yunnan Province, China using microhistological analysis of feces and phytochemical component analysis of food items, from January 2007 to March 2008. This region is the southernmost location of R. bieti with the most complex and varied vegetation types. R. bieti fed on 83 plant species of 26 families, at least 3 species of lichens and bamboos, respectively. The number of food items exploited varied markedly among seasons, with dietary diversity being greatest in summer and autumn. Young leaves of broadleaf plant, monocotyledonous plant leaves (bamboos), and 3 species of lichens in the genera Bryoria ( Bryoria confuse) and Usnea ( Unsea longissima and Unsea florida) were frequently eaten. Bamboos (Poaceae) and lichens formed a stable dietary constituent throughout the year, contributing about 24 and 13%, respectively, of the total feeding records. There was seasonal variation in the proportion of each food type in the diet of the R. bieti. Results of the phytochemistry analysis showed that food selectivity of R. bieti was positively correlated with the ratio of crude protein to neutral detergent fibre (CP/NDF) and negatively correlated with condensed tannins (CT). Results from the study also showed that the primary food items eaten by R. bieti in summer had higher CP and lower CT than in winter. Zoo Biol 30:296-307, 2011. © 2010 Wiley-Liss, Inc. [ABSTRACT FROM AUTHOR]

Niche shift between polyploid and diploid plants is an important requirement for the success of polyploid. Diploid, tetraploid, and hexaploid of kiwifruit distribute in different areas. Whether there is obvious niche differentiation and the major environmental factors which could influence the ecological niche of different ploidy kiwifruits are still unknown. Based on the natural distribution information collected from literature and by field works, the maximum entropy model (MaxEnt) was used to predict the potentially suitable ranges and the major climatic factors affecting distribution of different ploidy kiwifruits. Niche divergence between different ploidy kiwifruits was quantified by niche identity test. The results showed that there were obvious differences in the potential suitable areas of different ploidy kiwifruits. Diploid occurred in lower altitude Hunan foothills. Tetraploid nearly overlapped with diploid but tended to northern Guizhou and eastern Chongqing. Hexaploid were centered in Guizhou Plateau, northwestern Hunan, southwestern Hubei and southern Shanxi. Hexaploid kiwifruits preferred higher altitudes and latitudes. In addition, the hexaploid had wider highly suitable areas. Results of niche identity test showed overlapped niches between diploid and tetraploid, and different niches between diploid/tetraploid and hexaploid kiwifruits. Minimum temperature of the coldest month (Bio6) and precipitation of the driest month (Bio14) were key environmental factors driving the niche shift of ploidy kiwifruits. Polyploid kiwifruits could maintain a higher probability of existence under lower Bio6 and Bio14, which indicated more extreme niche in cold and arid mountains for polyploids.

Changes in the frequency and severity of drought events associated with climate change could affect plant growth, development, and adaptability. Hydraulic failure caused by xylem embo-lism is the main physiological consequences of drought stress. How to accurately quantify xylem embolism is particularly important for understanding plant responses to drought stress. The vulnerability of xylem to embolism is usually evaluated by constructing vulnerability curves (VCs). Several methods have been developed to construct VCs, but be inconsistent in their results. A deep understanding of the design principles of xylem embolism measurement methods and comparison of the similarities and differences of various methods in actual research are particularly important for the rational interpretation of literature results, and properly using VCs in models for predicting plant responses to water deficits. Here, we compared seven methods for constructing xylem vulnerability curves to embolism: bench dehydration, centrifugation, air injection, acoustic measurements, synchrotron and X-ray microtomography (Micro-CT), optical visualization method, and pneumatron method. We summarized current achievements and controversial viewpoints of the application of these methods in specific research. Finally, we provided prospects for measuring the vulnerability of xylem embolism and the selection of relevant methods for practical application in future studies.

Epiphytes are an important component of tropical and subtropical flora, and serve vital ecological functions in forest hydrology and nutrient fluxes. However, they often encounter water deficits because there is no direct contact between their roots and the soil. The strategies employed by epiphytes for maintaining water balance in relatively water-limited habitats are not completely understood. In the present study, we investigated the anatomical traits, water loss rates, and physiology of leaves and pseudobulbs of four Dendrobium species with different pseudobulb morphologies to understand the roles of leaf and pseudobulb in maintaining water balance of epiphytic orchids. Our results showed that two species (D. chrysotoxum and D. officinale), with lower rates of water loss, have thicker leaves and upper cuticles, but lower epidermal thickness and leaf dry mass per area. In contrast, the other two species (D. chrysanthum and D. crystallinum) with thinner cuticles and higher rates of water loss, have less tissue density and greater saturated water contents in their pseudobulbs. Therefore, our results indicate that these latter two species may resist drought by storing water in the pseudobulbs to compensate for their thin cuticles and rapid water loss through the leaves. Under the same laboratory conditions, excised pseudobulbs with attached leaves had lower rates of water loss when compared with samples comprising only excised leaves. This implies that epiphytic orchids utilize two different strategies for sustaining water balance: thick cuticles to conserve water in leaves and water storage in pseudobulbs. Our results also show that Dendrobium species with thin cuticles tend to have pseudobulbs with high water storage capacity that compensates for their faster rates of water loss. These outcomes contribute to our understanding of the adaptive water-use strategies in Dendrobium species, which is beneficial for the conservation and cultivation of epiphytic orchids., (Published by Oxford University Press on behalf of the Annals of Botany Company.)

Fundamental properties and the factors that influence the distribution of heavy metals of several fly ashes are analyzed. Experiments indicate that the structures are complex and the properties are changeable. The study results show that the chemical composition is Cl, Ca, K, Na, Si, Al, O, etc, and heavy metals are Zn, Pb, Cr, Cu etc. The main structures of fly ash are irregularly amorphous forms and polycrystalline aggregates. Generally, the ieaching toxicity exceeds the identification standard for hazardous wastes. Heavy metals are chiefly in the forms of tiny aerosol particles and aggregates on the surface of fly ash. The properties of fly ash are greatly influenced by the change of incinerators or the variation of incinerating time. The content of Cl ranges from 6.93% to 29.18%, while that of SiO2 does from 4.48% to 24.84%. The leaching toxicity varies between 0 and 163.10 mg x L(-1) (Pb) and between 0.049 and 164.90 mg x L(-1) (Zn).

Chemical composition and toxicity leaching characteristics of fly ash was analyzed. The experiment results show that many heavy metals were contained; leaching concentration of Pb is 67.03 mg/L, which exceeds the limit of identification standard for hazardous wastes. Effect of input mass of H3PO4 on immobilization of heavy metals and its long-term environmental stability was studied. The results show that when input 8% - 14% (H3PO4 mass/ fly ash mass) of H3PO4 sound immobilization effect can be achieved; 8% and 12% of H3PO4 will bring a satisfactory environmental stability of heavy metals, while more H3PO4 led to less buffer capacity to acid conditions. In fly ash treated by 12% H3PO4, a small quantity of crystal Cr2P2O7, ZnP2, Pb3P4O13, Pb3P2O7, NaZnPO4, NaPbP3O9, Ca2ZnSi2O7 can be detected by XRD; many independent fly ash particles and bar-shaped Pb5 (PO4)3Cl with a diameter of 0.3 - 0.5 microm were observed by SEM; concentrated heavy metal materials were not obtained by CHBr3 floatation. Conclusions can be drawn that, through neutralization reaction of H3PO4 with strongly alkaline fly ash, stabilization reaction conditions were improved, entrapped heavy metals were chemically activated and PO4(3-) needed in stabilization was produced. Activated heavy metals combined with PO4(3-) on surface of fly ash,generated phosphates existing as forms of solid solution in SiO2, CaCO3, CaSO4, KCl, NaCl.