Search

The initial signals governing sex determination vary widely among insects. Here we show that Armigeres subalbatus M factor (AsuMf), a male-specific duplication of an autosomal gene of the Drosophila behaviour/human splicing (DBHS) gene family, is the potential primary signal for sex determination in the human filariasis vector mosquito, Ar. subalbatus. Our results show that AsuMf satisfies two fundamental requirements of an M factor: male-specific expression and early embryonic expression. Ablations of AsuMf result in a shift from male- to female-specific splicing of doublesex and fruitless, leading to feminization of males both in morphology and general transcription profile. These data support the conclusion that AsuMf is essential for male development in Ar. subalbatus and reveal a male-determining factor that is derived from duplication and subsequent neofunctionalization of a member of the conserved DBHS family.

Cooling water accounts for the majority of water usage in power plants. With the aggravation of water scarce all over the world, adaptive actions to optimize cooling system and improve water efficiency of cooling process are required. This review aims to provide a comprehensive insight of the issues involving water saving of cooling system for power plants. Limitation of current cooling technologies were firstly discussed. Then some retrofits and optimization of system designs that could significantly help to reduce water and energy consumption in power plant were presented. The possibity, complexities and challenges of some non-traditional water supplies such as reclaimed water and seawater recirculating cooling for power plant applications were introduced. The key technologies of water treatment and monitoring for water quality control were also illustrated and the water-saving effect brought by advanced technology was introduced. Finally, opportunities and challenges of management for cooling system were suggested.

An improved multi-swarm migrating birds optimization (IMMBO) algorithm is proposed for hybrid flow shop scheduling with sequence-dependent setup times (HFS-SDST), to minimize the total maximum completion time (i.e., makespan). Permutation-based encoding is adopted to substitute the individual. The modified Nawaz-Enscore-Ham (MNEH) algorithm is employed to generate initial population which are assigned to each sub-swarm according to the makespan. For each sub-swarm, the neighborhood individuals of the leader and followers are generated respectively by performing serial and parallel neighborhood strategies. If the follower is better than the leader according to their makespan, they are exchanged to ensure the information interaction of individuals within the sub-swarm. Moreover, the discrete whale optimization strategy is embedded in IMMBO to optimize the leaders of all sub-swarms to enhance the interaction among them. Furthermore, the local search is designed for the optimal individual to further improve the local search ability of the algorithm. Meanwhile, to avoid algorithm premature convergence, the control strategy for population diversification is designed to the leader of each sub-swarm. Finally, based on adjusting the algorithm parameters experimentally, simulation experiments are conducted on four variants of IMMBO to verify the function of each part by testing an adaptation dataset of Ta. Moreover, the IMMBO is compared with three existing algorithms by testing an adaptation dataset of Ta, and the experimental results demonstrate the effectiveness of the IMMBO algorithm to solve the hybrid flow shop scheduling problem.

The history of vegetation and climate change during the Cenozoic has been reconstructed by systematically analyzing the sporopollen assemblage from Borehole ZKA02 in Beihai, Guangxi. Through the analysis of spore-pollen data, four sporopollen assemblages can be recognized. From the Early Miocene to the Middle Miocene, this area was covered mainly by deciduous broad-leaved mixed forest–wet meadow vegetation, with a mild and semi-humid climate. From the end of the Middle Miocene to the early Late Miocene, the study area was dominated by coniferous and broad-leaved mixed forest-wet meadow vegetation, with mild and semi-humid. The middle Late Miocene was a mixed deciduous broad-leaved forest–wet meadow vegetation, with increasing conifers and ferns, and the climate was warm and humid. In the late Late Miocene to Pliocene, it was deciduous broad-leaved mixed forest–wet meadow vegetation. The species of evergreen broad-leaved trees in tropical rain forests and subtropical low mountains increased obviously, and the fern molecules decreased obviously. The climate in the Late Pliocene was warm and semi-arid, drier than the previous three stages. Spore-pollen assemblages reflected the climate change characteristics during the Neogene, which have good comparability with the trend of global climate change.

Aedes albopictus is one of the most invasive insect species in the world and an effective vector for many important arboviruses. We reported previously that Ae. albopictus Nix (AalNix) is the male-determining factor of this species. However, whether AalNix alone is sufficient to initiate male development is unknown. Transgenic lines that express each of the three AalNix isoforms from the native promoter were obtained using piggyBac transformation. We verified the stable expression of AalNix isoforms in the transgenic lines and confirm that one isoform, AalNix3&4, is sufficient to convert females into fertile males (pseudo-males) that are indistinguishable from wild-type males. We also established a stable sex-converted female mosquito strain, AalNix3&4-♂4-pseudo-male. The pseudo-male mosquitoes can fly and mate normally with wild-type female, although their mating competitiveness is lower than wild-type. This work further clarifies the role of AalNix in the sex determination pathway and will facilitate the development of Ae. albopictus control strategies that rely on male-only releases such as SIT and sex-ratio distortion.

Perovskite solar cells (PSCs) commonly exhibit significant performance degradation due to ion migration through the top charge transport layer and ultimately metal electrode corrosion. Here, we demonstrate an interfacial management strategy using a boron chloride subphthalocyanine (Cl6SubPc)/fullerene electron-transport layer, which not only passivates the interfacial defects in the perovskite, but also suppresses halide diffusion as evidenced by multiple techniques, including visual element mapping by electron energy loss spectroscopy. As a result, we obtain inverted PSCs with an efficiency of 22.0% (21.3% certified), shelf life of 7000 h, T80 of 816 h under damp heat stress (compared to less than 20 h without Cl6SubPc), and initial performance retention of 98% after 2000 h at 80 °C in inert environment, 90% after 2034 h of illumination and maximum power point tracking in ambient for encapsulated devices and 95% after 1272 h outdoor testing ISOS-O-1. Our strategy and results pave a new way to move PSCs forward to their potential commercialization solidly.

The performance of perovskite photovoltaics is fundamentally impeded by the presence of undesirable defects that contribute to non-radiative losses within the devices. Although mitigating these losses has been extensively reported by numerous passivation strategies, a detailed understanding of loss origins within the devices remains elusive. Here, we demonstrate that the defect capturing probability estimated by the capture cross-section is decreased by varying the dielectric response, producing the dielectric screening effect in the perovskite. The resulting perovskites also show reduced surface recombination and a weaker electron-phonon coupling. All of these boost the power conversion efficiency to 22.3% for an inverted perovskite photovoltaic device with a high open-circuit voltage of 1.25 V and a low voltage deficit of 0.37 V (a bandgap ~1.62 eV). Our results provide not only an in-depth understanding of the carrier capture processes in perovskites, but also a promising pathway for realizing highly efficient devices via dielectric regulation.

BackgroundAedes albopictus is one of the most invasive species in the world as well as the important vector for mosquito-borne diseases such as dengue fever, chikungunya fever and zika virus disease. Chemical control of mosquitoes is an effective method to control mosquito-borne diseases, however, the wide and improper application of insecticides for vector control has led to serious resistance problems. At present, there have been many reports on the resistance to pyrethroid insecticides in vector mosquitoes including deltamethrin to Aedes albopictus. However, the fitness cost and vector competence of deltamethrin resistant Aedes albopictus remain unknown. To understand the impact of insecticide resistant mosquito is of great significance for the prevention and control mosquitoes and mosquito-borne diseases.Methodology/principal findingsA laboratory resistant strain (Lab-R) of Aedes albopictus was established by deltamethrin insecticide selecting from the laboratory susceptible strain (Lab-S). The life table between the two strains were comparatively analyzed. The average development time of Lab-R and Lab-S in larvae was 9.7 days and 8.2 days (P < 0.005), and in pupae was 2.0 days and 1.8 days respectively (P > 0.05), indicating that deltamethrin resistance prolongs the larval development time of resistant mosquitoes. The average survival time of resistant adults was significantly shorter than that of susceptible adults, while the body weight of resistant female adults was significantly higher than that of the susceptible females. We also compared the vector competence for dengue virus type-2 (DENV-2) between the two strains via RT-qPCR. Considering the results of infection rate (IR) and virus load, there was no difference between the two strains during the early period of infection (4, 7, 10 day post infection (dpi)). However, in the later period of infection (14 dpi), IR and virus load in heads, salivary glands and ovaries of the resistant mosquitoes were significantly lower than those of the susceptible strain (IR of heads, salivary glands and ovaries: P < 0.05; virus load in heads and salivary glands: P < 0.05; virus load in ovaries: P < 0.001). And then, fourteen days after the DENV-2-infectious blood meal, females of the susceptible and resistant strains were allow to bite 5-day-old suckling mice. Both stains of mosquito can transmit DENV-2 to mice, but the onset of viremia was later in the mice biting by resistant group as well as lower virus copies in serum and brains, suggesting that the horizontal transmission of the resistant strain is lower than the susceptible strain. Meanwhile, we also detected IR of egg pools of the two strains on 14 dpi and found that the resistant strain were less capable of vertical transmission than susceptible mosquitoes. In addition, the average survival time of the resistant females infected with DENV-2 was 16 days, which was the shortest among the four groups of female mosquitoes, suggesting that deltamethrin resistance would shorten the life span of female Aedes albopictus infected with DENV-2.Conclusions/significanceAs Aedes albopictus developing high resistance to deltamethrin, the resistance prolonged the growth and development of larvae, shorten the life span of adults, as well as reduced the vector competence of resistant Aedes albopictus for DENV-2. It can be concluded that the resistance to deltamethrin in Aedes albopictus is a double-edged sword, which not only endow the mosquito survive under the pressure of insecticide, but also increase the fitness cost and decrease its vector competence. However, Aedes albopictus resistant to deltamethrin can still complete the external incubation period and transmit dengue virus, which remains a potential vector for dengue virus transmission and becomes a threat to public health. Therefore, we should pay high attention for the problem of insecticide resistance so that to better prevent and control mosquito-borne diseases.

Understanding the fundamental properties of buried interfaces in perovskite photovoltaics is of paramount importance to the enhancement of device efficiency and stability. Nevertheless, accessing buried interfaces poses a sizeable challenge because of their non-exposed feature. Herein, the mystery of the buried interface in full device stacks is deciphered by combining advanced in situ spectroscopy techniques with a facile lift-off strategy. By establishing the microstructure-property relations, the basic losses at the contact interfaces are systematically presented, and it is found that the buried interface losses induced by both the sub-microscale extended imperfections and lead-halide inhomogeneities are major roadblocks toward improvement of device performance. The losses can be considerably mitigated by the use of a passivation-molecule-assisted microstructural reconstruction, which unlocks the full potential for improving device performance. The findings open a new avenue to understanding performance losses and thus the design of new passivation strategies to remove imperfections at the top surfaces and buried interfaces of perovskite photovoltaics, resulting in substantial enhancement in device performance.

Simultaneously improving device efficiency and stability is the most important issue in perovskite solar cell (PSC) research. Here, we strategically introduce a multi-functional interface layer (MFIL) with integrated roles of: (1) electron transport, (2) moisture barrier, (3) near-infrared photocurrent enhancement, (4) trap passivation, and (5) ion migration suppression to enhance the device performance. The narrow-band-gap non-fullerene acceptor, Y6, was screened out to replace the most commonly used PCBM in the inverted PSCs. A significantly improved power conversion efficiency of 21.0% was achieved, along with a remarkable stability (up to 1,700 h) without encapsulation under various external stimuli (light, heat, and moisture). Furthermore, systematic studies of the molecular orientation or passivation and the charge carrier dynamics at the interface between perovskite and MFIL were presented. These results offer deep insights for designing advanced interlayers and establish the correlations between molecular orientation, interface molecular bonding, trap state density, non-radiation recombination, and the device performance.

BackgroundThe Asian tiger mosquito, Aedes albopictus, an increasingly relevant arboviral vector, has spread worldwide. However, currently available tools are limited in terms of effective monitoring of vector populations and accurate determination of the extent of viral transmission, especially before and during outbreaks. Therefore, it is essential to develop novel monitoring and surveillance tools, particularly those that target adult mosquitoes and enhance the trapping efficiency for Ae. albopictus.MethodsA variety of human body odorants associated with different types of mosquito olfactory receptors were selected, and their attractiveness to Ae. albopictus was tested by a four-arm olfactometer. The optimal compatibility and proportion of the odorants, Mix-5, was observed via orthogonal design analyses. The attractiveness of Mix-5 to Ae. albopictus in the laboratory was assessed using Mosq-ovitraps and Electric Mosquito Killers. In the field, the effectiveness of generic BG-Lure, Mix-5 and a control treatment was compared with a baited Biogents Sentinel trap (BGS-trap) using a Latin square design.ResultsIn the olfactometer experiments, the attractiveness of the selected candidate compounds at varying dilutions was poor when the individual compounds were used alone. The optimal combination, Mix-5, was generated based on orthogonal design analyses. In the laboratory, the average numbers of female Ae. albopictus mosquitoes attracted by the synthetic odorant blend Mix-5 were 27.00 and 27.50, compared with 12.00 and 14.83 for the control, when using Mosq-ovitraps and Electric Mosquito Killers, respectively. In the field, the average number of Ae. albopictus female mosquitoes trapped by Mix-5 was 9.67 females/trap, whereas the average numbers for BG-Lure and the control were 7.78 and 4.47, respectively. The lure also played an important role in attracting Culex quinquefasciatus mosquitoes, and the average numbers of Cx. quinquefasciatus female mosquitoes attracted by Mix-5, BG-Lure and the control were 18.78, 25.11 and 12.22, respectively.ConclusionsA human odor-based bait blend was developed and exhibited enhanced effectiveness at attracting Ae. albopictus This blend can be used to monitor and trap dengue vector mosquitoes in Chinese cities.