Search

Through-the-Wall radar (TWR) human activity recognition (HAR) is a technology that uses low-frequency ultra-wideband (UWB) signal to detect and analyze indoor human motion. However, the high dependence of existing end-to-end recognition models on the distribution of TWR training data makes it difficult to achieve good generalization across different indoor testers. In this regard, the generalization ability of TWR HAR is analyzed in this paper. In detail, an end-to-end linear neural network method for TWR HAR and its generalization error bound are first discussed. Second, a micro-Doppler corner representation method and the change of the generalization error before and after dimension reduction are presented. The appropriateness of the theoretical generalization errors is proved through numerical simulations and experiments. The results demonstrate that feature dimension reduction is effective in allowing recognition models to generalize across different indoor testers., Comment: 6 pages, 4 figures, 0 table, in Proc. IEEE International Conference on Signal, Information and Data Processing (ICSIDP), 2024

Through-the-wall radar (TWR) human activity recognition can be achieved by fusing micro-Doppler signature extraction and intelligent decision-making algorithms. However, limited by the insufficient priori of tester in practical indoor scenarios, the trained models on one tester are commonly difficult to inference well on other testers, which causes poor generalization ability. To solve this problem, this paper proposes a generalizable indoor human activity recognition method based on micro-Doppler corner point cloud and dynamic graph learning. In the proposed method, DoG-{\mu}D-CornerDet is used for micro-Doppler corner extraction on two types of radar profiles. Then, a micro-Doppler corner filtering method based on polynomial fitting smoothing is proposed to maximize the feature distance under the constraints of the kinematic model. The extracted corners from the two types of radar profiles are concatenated together into three-dimensional point cloud. Finally, the paper proposes a dynamic graph neural network (DGNN)-based recognition method for data-to-activity label mapping. Visualization, comparison and ablation experiments are carried out to verify the effectiveness of the proposed method. The results prove that the proposed method has strong generalization ability on radar data collected from different testers., Comment: 15 pages, 12 figures, 6 tables, in IEEE Transactions on Aerospace and Electronics Systems, 2024

With the help of micro-Doppler signature, ultra-wideband (UWB) through-the-wall radar (TWR) enables the reconstruction of range and velocity information of limb nodes to accurately identify indoor human activities. However, existing methods are usually trained and validated directly using range-time maps (RTM) and Doppler-time maps (DTM), which have high feature redundancy and poor generalization ability. In order to solve this problem, this paper proposes a human activity micro-Doppler signature representation method based on joint Boulic-sinusoidal pendulum motion model. In detail, this paper presents a simplified joint Boulic-sinusoidal pendulum human motion model by taking head, torso, both hands and feet into consideration improved from Boulic-Thalmann kinematic model. The paper also calculates the minimum number of key points needed to describe the Doppler and micro-Doppler information sufficiently. Both numerical simulations and experiments are conducted to verify the effectiveness. The results demonstrate that the proposed number of key points of micro-Doppler signature can precisely represent the indoor human limb node motion characteristics, and substantially improve the generalization capability of the existing methods for different testers., Comment: 17 pages, 14 figures, 7 tables, in IEEE Transactions on Microwave Theory and Techniques, 2024

Combining unmanned aerial vehicle (UAV) with through-the-wall radar can realize moving targets detection in complex building scenes. However, clutters generated by obstacles and static objects are always stronger and non-stationary, which results in heavy impacts on moving targets detection. To address this issue, this paper proposes a moving target detection method based on Range-Doppler domain compensation and cancellation for UAV mounted dual channel radar. In the proposed method, phase compensation is performed on the dual channel in range-Doppler domain and then cancellation is utilized to achieve roughly clutters suppression. Next, a filter is constructed based on the cancellation result and the raw echoes, which is used to suppress stationary clutter furthermore. Finally, mismatch imaging is used to focus moving target for detection. Both simulation and UAV-based experiment results are analyzed to verify the efficacy and practicability of the proposed method.

To solve the problems of reduced accuracy and prolonging convergence time of through-the-wall radar (TWR) human motion due to wall attenuation, multipath effect, and system interference, we propose a multilink auto-encoding neural network (TWR-MCAE) data augmentation method. Specifically, the TWR-MCAE algorithm is jointly constructed by a singular value decomposition (SVD)-based data preprocessing module, an improved coordinate attention module, a compressed sensing learnable iterative shrinkage threshold reconstruction algorithm (LISTA) module, and an adaptive weight module. The data preprocessing module achieves wall clutter, human motion features, and noise subspaces separation. The improved coordinate attention module achieves clutter and noise suppression. The LISTA module achieves human motion feature enhancement. The adaptive weight module learns the weights and fuses the three subspaces. The TWR-MCAE can suppress the low-rank characteristics of wall clutter and enhance the sparsity characteristics in human motion at the same time. It can be linked before the classification step to improve the feature extraction capability without adding other prior knowledge or recollecting more data. Experiments show that the proposed algorithm gets a better peak signal-to-noise ratio (PSNR), which increases the recognition accuracy and speeds up the training process of the back-end classifiers., Comment: Publisher: IEEE Transactions on Geoscience and Remote Sensing (Volume: 60). Total Pages: 17. Total Figures: 17

In order to improve the accuracy and resolution for transmit beamspace multiple-input multiple-output (MIMO) radar, a search-free direction-of-arrival (DOA) estimation method based on tensor decomposition and polynomial rooting is proposed. In the proposed method, a 3-order tensor is firstly designed to model the received signal of MIMO radar on the basis of the multi-linear property. Then, the factor matrix with target DOA information is obtained by the tensor decomposition via alternating least squares (ALS) algorithm, and subsequently the DOA estimation is converted into the independent minimization problem. By exploiting the Vandermonde structure of the transmit steering vector, a polynomial function is constructed to solve the minimization problem via polynomial rooting. The factor matrix contained in the coefficients of the polynomial can be regarded as a block matrix in the generalized sidelobe canceller (GSC), which accordingly forms a unique deep null in the direction of target in the transmit beampattern. The proposed method can obtain the DOA estimation without the requirements of spectrum searching or transmit beamspace matrix design, which is different from the conventional DOA estimation techniques. The effectiveness of the proposed method is verified by the simulations., Comment: 14 pages, 4 figures,1 table, submitted to Signal Processing

We develop a new tensor model for slow-time multiple-input multiple output (MIMO) radar and apply it for joint direction-of-departure (DOD) and direction-of-arrival (DOA) estimation. This tensor model aims to exploit the independence of phase modulation matrix and receive array in the received signal for slow-time MIMO radar. Such tensor can be decomposed into two tensors of different ranks, one of which has identical structure to that of the conventional tensor model for MIMO radar, and the other contains all phase modulation values used in the transmit array. We then develop a modification of the alternating least squares algorithm to enable parallel factor decomposition of tensors with extra constants. The Vandermonde structure of the transmit and receive steering matrices (if both arrays are uniform and linear) is then utilized to obtain angle estimates from factor matrices. The multi-linear structure of the received signal is maintained to take advantage of tensor-based angle estimation algorithms, while the shortage of samples in Doppler domain for slow-time MIMO radar is mitigated. As a result, the joint DOD and DOA estimation performance is improved as compared to existing angle estimation techniques for slow-time MIMO radar. Simulation results verify the effectiveness of the proposed method., Comment: 6 double-column pages, 4 figures, submitted IEEE Signal Processing Letters