Search

Since the discovery of superconductivity in the Fe(Te,Se) system, it has been a general consensus that the end member of FeTe is not superconducting. Nonetheless, in recent years, there have been reports of superconducting FeTe films, but the origin of their superconductivity remains mysterious. Here, we provide the first comprehensive review of all the reported FeTe films regarding the relationship between their superconductivity and neighboring layers. Based on this review, we show that telluride neighboring layers are the key to superconducting FeTe films. Then, with additional new studies, we show that stoichiometric Te content, which can be readily achieved in FeTe films with the assistance of neighboring telluride layers, might be crucial to stabilizing the superconductivity in this system. This work provides insights into the underlying mechanism behind superconductivity in FeTe films and sheds light on the critical role of neighboring layers and stoichiometry control toward manipulating topological superconductivity in FeTe heterostructures., Comment: 16 pages, 4 figures

The natural van der Waals superlattice MnBi2Te4-(Bi2Te3)m provides an optimal platform to combine topology and magnetism in one system with minimal structural disorder. Here, we show that this system can harbor both ferromagnetic (FM) and antiferromagnetic (AFM) orders and that these magnetic orders can be controlled in two different ways by either varying the Mn-Mn distance while keeping the Bi2Te3/MnBi2Te4 ratio constant or vice versa. We achieve this by creating atomically engineered sandwich structures composed of Bi2Te3 and MnBi2Te4 layers. We show that the AFM order is exclusively determined by the Mn-Mn distance whereas the FM order depends only on the overall Bi2Te3/MnBi2Te4 ratio regardless of the distance between the MnBi2Te4 layers. Our results shed light on the origins of the AFM and FM orders and provide insights into how to manipulate magnetic orders not only for the MnBi2Te4-Bi2Te3 system but also for other magneto-topological materials., Comment: 25 pages, 5 figures, accepted to Nano Letters

Highly crystalline and easily feasible topological insulator-superconductor (TI-SC) heterostructures are crucial for the development of practical topological qubit devices. The optimal superconducting layer for TI-SC heterostructures should be highly resilient against external contaminations and structurally compatible with TIs. In this study, we provide a solution to this challenge by showcasing the growth of a highly crystalline TI-SC heterostructure using refractory TiN (111) as the superconducting layer. This approach can eliminate the need for in-situ cleaving or growth. More importantly, the TiN surface shows high resilience against contaminations during air exposure, as demonstrated by the successful recyclable growth of Bi2Se3. Our findings indicate that TI-SC heterostructures based on nitride films are compatible with device fabrication techniques, paving a path to the realization of practical topological qubit devices in the future., Comment: 22 pages, 4 figures, accepted by ACS Applied Materials & Interfaces

In the recent past, MnTe has proven to be a crucial component of the intrinsic magnetic topological insulator (IMTI) family [MnTe]m[Bi2Te3]n, which hosts a wide range of magneto-topological properties depending on the choice of m and n. However, bulk crystal growth allows only a few combinations of m and n for these IMTIs due to the strict limitations of the thermodynamic growth conditions. One way to overcome this challenge is to utilize atomic layer-by-layer molecular beam epitaxy (MBE) technique, which allows arbitrary sequences of [MnTe]m and [Bi2Te3]n to be formed beyond the thermodynamic limit. For such MBE growth, finding optimal growth templates and conditions for the parent building block, MnTe, is a key requirement. Here, we report that two different hexagonal phases of MnTe-nickeline (NC) and zinc-blende/wurtzite (ZB-WZ) structures, with distinct in-plane lattice constants of 4.20 +/- 0.04 A and 4.39 +/- 0.04 A, respectively-can be selectively grown on c-plane Al2O3 substrates using different buffer layers and growth temperatures. Moreover, we provide the first comparative studies of different MnTe phases using atomic-resolution scanning transmission electron microscopy and show that ZB and WZ-like stacking sequences can easily alternate between the two. Surprisingly, In2Se3 buffer layer, despite its lattice constant (4.02 A) being closer to that of the NC phase, fosters the ZB-WZ instead, whereas Bi2Te3, sharing the same lattice constant (4.39 A) with the ZB-WZ phase, fosters the NC phase. These discoveries suggest that lattice matching is not always the most critical factor determining the preferred phase during epitaxial growth. Overall, this will deepen our understanding of epitaxial growth modes for chalcogenide materials and accelerate progress toward new IMTI phases as well as other magneto-topological applications.

Magnetic topological insulator is a fertile platform to study the interplay between magnetism and topology. The unique electronic band structure can induce exotic transport and optical properties. However, a comprehensive optical study in both near-infrared frequency and terahertz frequency has been lacking. Here, we report magneto-optical effects from a heterostructure of Cr-incorporated topological insulator, CBST. We use 800 nm magneto-optical Kerr effect to reveal a ferromagnetic order in the CBST film with a high transition temperature at 160 K. We also use time-domain terahertz polarimetry to reveal a terahertz Faraday rotation of 1.5 mrad and Kerr rotation of 5.1 mrad at 2 K. The calculated terahertz Hall conductance is 0.42 $e^2/h$. Our work shows the optical responses of an artificially layered magnetic topological insulator, paving the way towards high-temperature quantum anomalous Hall effect via heterostructure engineering., Comment: 6 pages, 4 figures

Quantum anomalous Hall effect (QAHE) was discovered a decade ago, but is still not utilized beyond a handful of research groups, due to numerous limitations such as extremely low temperature, electric field-effect gating requirement, small sample sizes and environmental aging effect. Here, we present a robust platform that provides effective solutions to these problems. Specifically, on this platform, we observe QAH signatures at record high temperatures, with the Hall conductance of 1.00 e2/h at 2.0 K, 0.98 e2/h at 4.2 K, and 0.92 e2/h at 10 K, on centimeter-scale substrates, without electric-field-effect gating. The key ingredient is an active CrOx capping layer, which substantially boosts the ferromagnetism while suppressing environmental degradation. With this development, QAHE will now be accessible to much broader applications than before., Comment: 20 pages, 8 figures, Accepted for publication in Nano Letters, https://pubs.acs.org/doi/full/10.1021/acs.nanolett.3c01313

Epitaxial Fe(Te,Se) thin films have been grown on various substrates but never been realized on magnetic layers. Here we report the epitaxial growth of four-fold Fe(Te,Se) film on a six-fold antiferromagnetic insulator, MnTe. The Fe(Te,Se)/MnTe heterostructure shows a clear superconducting transition at around 11 K and the critical magnetic field measurement suggests the origin of the superconductivity to be bulk-like. Structural characterizations suggest that the uniaxial lattice match between Fe(Te,Se) and MnTe allows a hybrid symmetry epitaxy mode, which was recently discovered between Fe(Te,Se) and Bi2Te3. Furthermore, Te/Fe flux ratio during deposition of the Fe(Te,Se) layer is found to be critical for its superconductivity. Now that superconducting Fe(Te,Se) can be grown on two related hexagonal platforms, Bi2Te3 and MnTe, this result opens a new possibility of combining topological superconductivity of Fe(Te,Se) with the rich physics in the intrinsic magnetic topological materials (MnTe)n(Bi2Te3)m family., Comment: 19 pages, 5 figures, accepted by Nano Letters

Ca3Co2O6 is a frustrated magnet consisting of a triangular arrangement of chains of Ising spins. It shows regular magnetization steps vs magnetic field every 1.2 T that are metastable with very slow dynamics. This has puzzled the community for many years and given rise to numerous potential theories. Here we approach the problem by seeking the elusive magnetic equilibrium state at T = 2 K. To this end, we explore two approaches: (1) bypassing the slow dynamics produced by changing fields by instead field-cooling directly to the target temperature, and (2) quantum annealing in transverse magnetic fields. While we observe no measurable effect of the quantum annealing in fields up to 7 T, which is likely due to the large Ising anisotropy of Co spins in this material, we find that for the field cooling in longitudinal fields we achieve the predicted equilibrium 1/3 magnetization. We perform Monte Carlo simulations of the ground state phase diagram and we also simulate the quantum annealing process and find good agreement between experiment and theory. Thus we present an investigation of the elusive ground state properties of the canonical frustrated triangular system Ca3Co2O6.

Band structure engineering and interfacial buffer layers have been demonstrated as effective means to tune the Fermi level in topological insulators (TI). In particular, the charge compensated compound (BixSb1-x)2Te3 (BST) plays a critical role in the molecular beam epitaxy growth of magnetic TIs. Here we introduce a strategy of exploiting epitaxial Cr2O3 as a buffer layer and amorphous Cr2O3 as a capping layer in the growth of BST films. These films exhibit carrier density lower than 1012/cm2 over a wide range of Bi contents and higher mobility than BST films directly grown on Al2O3 substrate, shedding light on the importance of interfacial layers for TI films and paving a new avenue to the application of magnetic BST films., Comment: 5 pages, 3 figures, Invited article to a Special issue in Journal of Physics D: Applied Physics

It is challenging to grow an epitaxial four-fold compound superconductor (SC) on six-fold topological insulator (TI) platform due to stringent lattice-matching requirement. Here, we demonstrate that Fe(Te,Se) can grow epitaxially on a TI (Bi2Te3) layer due to accidental, uniaxial lattice match, which is dubbed as "hybrid symmetry epitaxy". This new growth mode is critical to stabilizing robust superconductivity with TC as high as 13 K. Furthermore, the superconductivity in this FeTe1-xSex/Bi2Te3 system survives in Te-rich phase with Se content as low as x = 0.03 but vanishes at Se content above x = 0.56, exhibiting a phase diagram that is quite different from that of the conventional Fe(Te,Se) systems. This unique heterostructure platform that can be formed in both TI-on-SC and SC-on-TI sequences opens a route to unprecedented topological heterostructures., Comment: 41 pages, 14 figures, accepted by Nano Letters

Controlling magnetic order in magnetic topological insulators (MTIs) is a key to developing spintronic applications with MTIs, and is commonly achieved by changing the magnetic doping concentration, which inevitably affects spin-orbit-coupling strength and the very topological properties. Here, we demonstrate tunable magnetic properties in topological heterostructures over a wide range, from a ferromagnetic phase with Curie temperature of around 100 K all the way to a paramagnetic phase, while keeping the overall chemical composition the same, by controlling the thickness of non-magnetic spacer layers between two atomically-thin magnetic layers. This work showcases that spacer-layer control is a powerful tool to manipulate magneto-topological functionalities in MTI heterostructures. Furthermore, the interaction between the MTI and the Cr2O3 buffer layers also led to robust topological Hall effect surviving up to a record-high 6 T of magnetic field, shedding light on the critical role of interfacial layers in thin film topological materials., Comment: 25 pages, 5 figures, accepted by Nano Letters

We present a high resolution method for measuring magnetostriction in millisecond pulsed magnetic fields at cryogenic temperatures with a sensitivity of $1.11\times10^{-11}/\sqrt{\rm Hz}$. The sample is bonded to a thin piezoelectric plate, such that when the sample's length changes, it strains the piezoelectric and induces a voltage change. This method is more sensitive than a fiber-Bragg grating method. It measures two axes simultaneously instead of one. The gauge is small and versatile, functioning in DC and millisecond pulsed magnetic fields. We demonstrate its use by measuring the magnetostriction of Ca$_3$Co$_{1.03}$Mn$_{0.97}$O$_6$ single crystals in pulsed magnetic fields. By comparing our data to new and previously published results from a fiber-Bragg grating magnetostriction setup, we confirm that this method detects magnetostriction effects. We also demonstrate the small size and versatility of this technique by measuring angle dependence with respect to the applied magnetic field in a rotator probe in 65 T millisecond pulsed magnetic fields.

Lead-halide perovskites attracted attention as materials for high-efficiency solar cells and light emitting applications. Among their attributes are solution processability, high absorbance in the visible spectral range and defect tolerance, as manifested in long photocarrier lifetimes and diffusion lengths. The microscopic origin of photophysical properties of perovskites is, however, still unclear and under debate. Here, we have observed an interesting universal scaling behavior in a series of (hybrid and all-inorganic) perovskite single crystals investigated via simultaneous measurements of the Hall effect, photoconductivity and photoluminescence. A clear correlation between photoconductivity and photoluminescence as functions of the incident photon flux is observed. While photoconductivity exhibits a crossover in the power-law dependence between power exponents 1 and 1/2, photoluminescence exhibits a crossover between power exponents 2 and 3/2. This correlation is found in all the studied compounds irrespective of the cation type (organic or inorganic) or crystallographic phases. We propose phenomenological microscopic mechanisms that explain these interesting non-trivial power exponents and crossovers between them in this broad class of lead-halide perovskites.

Frustrated systems exhibit remarkable properties due to the high degeneracy of their ground states. Stabilised by competing interactions, a rich diversity of typically nanometre-sized phase structures appear in polymer and colloidal systems, while the surface of ice pre-melts due to geometrically frustrated interactions. Atomic spin systems where magnetic interactions are frustrated by lattice geometry provide a fruitful source of emergent phenomena, such as fractionalised excitations analogous to magnetic monopoles. The degeneracy inherent in frustrated systems may prevail all the way down to absolute zero temperature, or it may be lifted by small perturbations or entropic effects. In the geometrically frustrated Ising--like magnet Ca3Co2O6, we follow the temporal and spatial evolution of nanoscale magnetic fluctuations firmly embedded inside the spin--density--wave magnetic structure. These fluctuations are a signature of a competing ferrimagnetic phase with an incommensurability that is different from, but determined by the host. As the temperature is lowered, the fluctuations slow down into a super-paramagnetic regime of stable spatiotemporal nano-structures.

We have studied the magnetic field dependence of far-infrared active magnetic modes in a single ferroelectric domain \BFO/ crystal at low temperature. The modes soften close to the critical field of 18.8\,T along the [001] (pseudocubic) axis, where the cycloidal structure changes to the homogeneous canted antiferromagnetic state and a new strong mode with linear field dependence appears that persists at least up to 31\,T. A microscopic model that includes two \DM/ interactions and easy-axis anisotropy describes closely both the zero-field spectroscopic modes as well as their splitting and evolution in a magnetic field. The good agreement of theory with experiment suggests that the proposed model provides the foundation for future technological applications of this multiferroic material., Comment: Added Randy S. Fishman to the author list, he contributed the theory

We present a terahertz spectroscopic study of magnetic excitations in ferroelectric antiferromagnet BiFeO3. We interpret the observed spectrum of long-wavelength magnetic resonance modes in terms of the normal modes of the material's cycloidal antiferromagnetic structure. We find that the modulated Dzyaloshinski-Moriya interaction leads to a splitting of the out-of-plane resonance modes. We also assign one of the observed absorption lines to an electromagnon excitation that results from the magnetoelectric coupling between the ferroelectric polarization and the cycloidal magnetic structure of BiFeO3.