Search

Manipulating the oxidation state of Cu catalysts can significantly affect the selectivity and activity of electrocatalytic carbon dioxide reduction (CO2RR). However, the thermodynamically favorable cathodic reduction to metallic states typically leads to catalytic deactivation. Herein, a defect construction strategy is employed to prepare crystalline/amorphous Cu2+1O/CuOx heterostructures (c/a-CuOx) with abundant Cu0 and Cuδ+ (0 < δ< 1) sites for CO2RR. The C2+ Faradaic efficiency of the heterostructured Cu catalyst is up to 81.3%, with partial current densities of 406.7 mA·cm−2. Significantly, real-time monitoring of the Cu oxidation state evolution by in-situ Raman spectroscopy confirms the stability of Cuδ+ species under long-term high current density operation. Density functional theory (DFT) calculations further reveal that the adjacent Cu0 and Cuδ+ sites in heterostructured c/a-CuOx can efficiently reduce the energy barrier of CO coupling for C2+ products. [ABSTRACT FROM AUTHOR]

Single atom catalysts (SACs) have been widely studied in the field of CO2 electroreduction, but industrial‐level current density and near‐unity product selectivity are still difficult to achieve. Herein, a diatomic site catalysts (DASCs) consisting of Co‐Cu hetero‐diatomic pairs is synthesized. The CoCu DASC exhibits excellent selectivity with the maximum CO Faradaic efficiency of 99.1 %. The CO selectivity can maintain above 95 % over a wide current density range from 100 mA cm−2 to 500 mA cm−2. The maximum CO partial current density can reach to 483 mA cm−2 in flow cell, far exceed industrial‐level current density requirements (>200 mA cm−2). Theoretical calculation reveals that the synergistic catalysis of the Co‐Cu bimetallic sites reduce the activation energy and promote the formation of intermediate *COOH. This work shows that the introduction of another metal atom into SACs can significantly affect the electronic structure and then enhance the catalytic activity of SACs. [ABSTRACT FROM AUTHOR]

Silent information regulator 2 (Sir2) is a nicotinamide adenine dinucleotide- (NAD+-) dependent deacetylase. The homology of SIRT1 and Sir2 has been extensively studied. SIRT1 deacetylates target proteins using the coenzyme NAD+ and is therefore linked to cellular energy metabolism and the redox state through multiple signalling and survival pathways. During the past decade, investigators have reported that SIRT1 activity is essential in cancer, neurodegenerative diseases, diabetes, cardiovascular disease, and other age-related diseases. In the kidneys, SIRT1 may inhibit renal cell apoptosis, inflammation, and fibrosis. Therefore its activation may also become a new therapeutic target in the patients with chronic kidney disease including diabetic nephropathy. In this paper, we would like to review the protective functions of sirtuins and the role of SIRT1 in the onset of kidney disease based on previous studies, including diabetic nephropathy, acute renal injury, chronic kidney disease as well as lupus nephritis.

Metal N- heterocyclic carbenes (M-NHCs) on the pore walls of a porous metal-organic framework (MOF) can be used as active sites for efficient organic catalysis. Traditional approaches that need strong alkaline reagents or insoluble Ag2O are not, however, suitable for the incorporation of NHCs on the backbones of MOFs because such reagents could destroy their frameworks or result in low reactivity. Accordingly, development of facile strategies toward functional MOFs with covalently bound M-NHCs for catalysis is needed. Herein, we describe the development of a general and facile approach to preparing MOFs with covalently linked active M-NHC (M = Pd, Ir) single-site catalysts by using a soluble Ag salt AgOC(CF3)3 as the source and subsequent transmetalation. The well-defined M-NHC-MOF (M = Pd, Ir) catalysts obtained in this way have shown excellent catalytic activity and stability in Suzuki reactions and hydrogen transfer reactions. This provides a general and facile strategy for anchoring functional M-NHC single-site catalysts onto functionalized MOFs for different reactions. [ABSTRACT FROM AUTHOR]

The electrocatalytic conversion of CO2 into value‐added chemicals is a promising approach to realize a carbon‐energy balance. However, low current density still limits the application of the CO2 electroreduction reaction (CO2RR). Metal–organic frameworks (MOFs) are one class of promising alternatives for the CO2RR due to their periodically arranged isolated metal active sites. However, the poor conductivity of traditional MOFs usually results in a low current density in CO2RR. We have prepared conductive two‐dimensional (2D) phthalocyanine‐based MOF (NiPc‐NiO4) nanosheets linked by nickel‐catecholate, which can be employed as highly efficient electrocatalysts for the CO2RR to CO. The obtained NiPc‐NiO4 has a good conductivity and exhibited a very high selectivity of 98.4 % toward CO production and a large CO partial current density of 34.5 mA cm−2, outperforming the reported MOF catalysts. This work highlights the potential of conductive crystalline frameworks in electrocatalysis. [ABSTRACT FROM AUTHOR]

The electrocatalytic conversion of CO2 into value‐added chemicals is a promising approach to realize a carbon‐energy balance. However, low current density still limits the application of the CO2 electroreduction reaction (CO2RR). Metal–organic frameworks (MOFs) are one class of promising alternatives for the CO2RR due to their periodically arranged isolated metal active sites. However, the poor conductivity of traditional MOFs usually results in a low current density in CO2RR. We have prepared conductive two‐dimensional (2D) phthalocyanine‐based MOF (NiPc‐NiO4) nanosheets linked by nickel‐catecholate, which can be employed as highly efficient electrocatalysts for the CO2RR to CO. The obtained NiPc‐NiO4 has a good conductivity and exhibited a very high selectivity of 98.4 % toward CO production and a large CO partial current density of 34.5 mA cm−2, outperforming the reported MOF catalysts. This work highlights the potential of conductive crystalline frameworks in electrocatalysis. [ABSTRACT FROM AUTHOR]

The electrocatalytic conversion of CO2 into value‐added chemicals is a promising approach to realize a carbon‐energy balance. However, low current density still limits the application of the CO2 electroreduction reaction (CO2RR). Metal–organic frameworks (MOFs) are one class of promising alternatives for the CO2RR due to their periodically arranged isolated metal active sites. However, the poor conductivity of traditional MOFs usually results in a low current density in CO2RR. We have prepared conductive two‐dimensional (2D) phthalocyanine‐based MOF (NiPc‐NiO4) nanosheets linked by nickel‐catecholate, which can be employed as highly efficient electrocatalysts for the CO2RR to CO. The obtained NiPc‐NiO4 has a good conductivity and exhibited a very high selectivity of 98.4 % toward CO production and a large CO partial current density of 34.5 mA cm−2, outperforming the reported MOF catalysts. This work highlights the potential of conductive crystalline frameworks in electrocatalysis. [ABSTRACT FROM AUTHOR]

The electrocatalytic conversion of CO2 into value‐added chemicals is a promising approach to realize a carbon‐energy balance. However, low current density still limits the application of the CO2 electroreduction reaction (CO2RR). Metal–organic frameworks (MOFs) are one class of promising alternatives for the CO2RR due to their periodically arranged isolated metal active sites. However, the poor conductivity of traditional MOFs usually results in a low current density in CO2RR. We have prepared conductive two‐dimensional (2D) phthalocyanine‐based MOF (NiPc‐NiO4) nanosheets linked by nickel‐catecholate, which can be employed as highly efficient electrocatalysts for the CO2RR to CO. The obtained NiPc‐NiO4 has a good conductivity and exhibited a very high selectivity of 98.4 % toward CO production and a large CO partial current density of 34.5 mA cm−2, outperforming the reported MOF catalysts. This work highlights the potential of conductive crystalline frameworks in electrocatalysis. [ABSTRACT FROM AUTHOR]

It is still a great challenge to achieve high selectivity of CH4 in CO2 electroreduction reactions (CO2RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO2 activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH4. Here, Cu2O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper‐based metal–organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH4 with partial current density of 10.8 mA cm−2 at −1.4 V vs. RHE (reversible hydrogen electrode) in CO2RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH2O and *OCH3) involved in the pathway of CH4 formation are stabilized by the single active Cu2O(111) and hydrogen bonding, thus generating CH4 instead of CO. [ABSTRACT FROM AUTHOR]

We report a facile but effective approach to construct a highly dispersed diatomic catalyst. A carbon-embedded diatomic Ni2 catalyst was synthesized from carbon black, polyaniline and nickel(II) salts. The resulting catalyst exhibits excellent activity for the CO2 reduction reaction (CO2RR) at low Ni content with a faradaic efficiency of CO over 95% in the potential range from −0.6 V to −1.0 V vs. reversible hydrogen electrode (RHE). A high specific current density of 37.2 A mg−1 Ni was recorded at −1.1 V, among the highest reported values for Ni-based electrocatalysts. [ABSTRACT FROM AUTHOR]

Metal–organic frameworks (MOFs) are promising alternative precursors for the fabrication of heteroatom‐doped carbon materials for energy storage and conversion. However, the direct pyrolysis of bulk MOFs usually gives microporous carbonaceous materials, which significantly hinder the mass transportation and the accessibility of active sites. Herein, N‐doped carbon aerogels with hierarchical micro‐, meso‐, and macropores were fabricated through one‐step pyrolysis of zeolitic imidazolate framework‐8/carboxymethylcellulose composite gel. Owing to the hierarchical porosity, high specific surface area, favorable conductivity, excellent thermal and chemical stability, the as‐prepared N‐doped carbon aerogel exhibits excellent oxygen reduction reaction (ORR) activity, long‐term durability, and good methanol tolerance in alkaline medium. This work thus provides a new way to fabricate new types of MOF‐derived carbon aerogels for various applications. [ABSTRACT FROM AUTHOR]

Background International normalized ratio (INR) self-testing can improve the management of anticoagulation therapy with warfarin for the patients following mechanical heart valve replacement. Several reviews and studies have demonstrated self-management as an option to improve patient's outcome considerably after mechanical heart valve replacement. We sought to analyze the security, economy and discuss the prospect of self-testing of anticoagulation therapy in patients following mechanical heart valve replacement in China, and evaluate the accuracy and stability of CoaguChek XS portable INR-testing device. Methods This was a prospective self-controlled clinical study conducted with 526 patients receiving oral warfarin anticoagulation therapy after mechanical heart valve replacement in the period of Mar.1, 2012 - Nov.1, 2012 in Cardiovascular Surgery Department of West China Hospital of Sichuan University. The same patient performed INR testing with CoaguChek XS portable coagulometer (group1) and central lab (group 2) in parallel. The follow-up time was 6 months. Meanwhile, a questionnaire was handed out to survey the expenses required for the re-examination visits to the hospital, time, and anticoagulation complications. Results No severe anticoagulation complications occurred in all the patients. No significant difference of the INR results were observed between group 1 and group 2, they showed significant relevance, r = 0.953(p < 0.05). Compared with the conventional method of INR testing in hospital, the portable coagulometer is convenient, quick and less traumatic. Selftesting of anticoagulation therapy reduced the cost and the time required for re-examination. Conclusions Results of CoaguChek XS monitor are precise and have a good consistency and stability as compared with traditional laboratory testing. For the patients receiving anticoagulation therapy after mechanical heart valve replacement, the self-testing of anticoagulation therapy with portable coagulometer is a safe choice, and it has a promising future application in China. [ABSTRACT FROM AUTHOR]