Search

Non-intrusive sensors that can be attached to marine species offer opportunities to study the impacts of environmental changes on their behaviors and well-being. This work presents a thin, flexible sensor tag to monitor the effects of dissolved oxygen and salinity on bivalve gape movement. The measurement range studied was 0.5-6 ppm for the dissolved oxygen sensor and 4-40 g kg-1 for the salinity sensor. The curvature strain sensor based on electrodeposited semiconducting fibers enabled measurements of an oyster's gape down to sub-mm displacement. The multiplexed sensors were fabricated by low-cost techniques, offering an economical and convenient platform for aquaculture studies.

Infrared photodetectors are essential to many applications, including surveillance, communications, process monitoring, and biological imaging. The short-wave infrared (SWIR) spectral region (λ = 1-3 μm) is particularly powerful for health monitoring and medical diagnostics because biological tissues show low absorbance and minimal SWIR autofluorescence, enabling greater penetration depth and improved resolution in comparison with visible light. However, current SWIR photodetection technologies are largely based on epitaxially grown inorganic semiconductors, which are costly, require complex processing, and impose cooling requirements incompatible with wearable electronics. Solution-processable semiconductors are being developed for infrared detectors to enable low-cost direct deposition and facilitate monolithic integration and resolution not achievable using current technologies. In particular, organic semiconductors offer numerous advantages, including large-area and conformal coverage, temperature insensitivity, and biocompatibility, for enabling ubiquitous SWIR optoelectronics. This Account introduces recent efforts to advance the spectral response of organic photodetectors into the SWIR. High-performance visible to near-infrared (NIR) organic photodetectors have been demonstrated by leveraging the wealth of knowledge from organic solar cell research in the past decade. On the other hand, organic semiconductors that absorb in the SWIR are just emerging, and only a few organic materials have been reported that exhibit photocurrent past 1 μm. In this Account, we survey novel SWIR molecules and polymers and discuss the main bottlenecks associated with charge recombination and trapping, which are more challenging to address in narrow-band-gap photodetectors in comparison with devices operating in the visible to NIR. As we call attention to discrepancies in the literature regarding performance metrics, we share our perspective on potential pitfalls that may lead to overestimated values, with particular attention to the detectivity (signal-to-noise ratio) and temporal characteristics, in order to ensure a fair comparison of device performance. As progress is made toward overcoming challenges associated with losses due to recombination and increasing noise at progressively narrower band gaps, the performance of organic SWIR photodetectors is steadily rising, with detectivity exceeding 1011 Jones, comparable to that of commercial germanium photodiodes. Organic SWIR photodetectors can be incorporated into wearable physiological monitors and SWIR spectroscopic imagers that enable compositional analysis. A wide range of potential applications include food and water quality monitoring, medical and biological studies, industrial process inspection, and environmental surveillance. There are exciting opportunities for low-cost organic SWIR technologies to be as widely deployable and affordable as today's ubiquitous cell phone cameras operating in the visible, which will serve as an empowering tool for users to discover information in the SWIR and inspire new use cases and applications.

An inkjet-printed inductor–capacitor (LC) resonator is demonstrated for wireless monitoring of pressure in aqueous environments. The sensing mechanism is based on a compressible capacitor that modulates the LC circuit resonant frequency depending on the applied pressure. The trace conductivity and geometric designs of inductors are improved to increase mutual inductive coupling between the sensor and the readout coil. The dielectric porosity in the capacitive sensors are tuned to enhance pressure sensitivity. The encapsulated sensor showed a linear response to pressure between 30 and 170 mmHg (4–23 kPa) with respect to atmospheric pressure and a resolution of 3 mmHg. The sensor temporal response is up to 6 Hz and capable of capturing typical heart-pulse waveforms as a proof-of-concept demonstration.

Haptic actuators generate touch sensations and provide realism and depth in human-machine interactions. A new generation of soft haptic interfaces is desired to produce the distributed signals over large areas that are required to mimic natural touch interactions. One promising approach is to combine the advantages of organic actuator materials and additive printing technologies. This powerful combination can lead to devices that are ergonomic, readily customizable, and economical for researchers to explore potential benefits and create new haptic applications. Here, an overview of emerging organic actuator materials and digital printing technologies for fabricating haptic actuators is provided. In particular, the focus is on the challenges and potential solutions associated with integration of multi-material actuators, with an eye toward improving the fidelity and robustness of the printing process. Then the progress in achieving compact, lightweight haptic actuators by using an open-source extrusion printer to integrate different polymers and composites in freeform designs is reported. Two haptic interfaces-a tactile surface and a kinesthetic glove-are demonstrated to show that printing with organic materials is a versatile approach for rapid prototyping of various types of haptic devices.

Author(s): Wu, Zhenghui; Zhai, Yichen; Yao, Weichuan; Eedugurala, Naresh; Zhang, Song; Huang, Lifeng; Gu, Xiaodan; Azoulay, Jason D; Ng, Tse Nga

This presentation shows an example of an instrumented glove for augmenting movement disorder assessments. The system is based on capacitive pressure sensing, and the validation allows an objective, repeatable metric that improve resolution over the current best practices. The glove measures the power required to move a patient’s arm and shows reduced inter- and intra-rater variability. Our approach using wearable sensors offers an objective route for the characterization of movement patterns, which would permit the effective evaluation of intervention outcomes, as well as provide a platform for novel motor interventions in the future. In addition, another type of biomechanical measurements involving blood pulsations is being developed using photosensors responsive to the short wavelength infrared (SWIR) spectra. Currently conventional SWIR sensors are limited by complex die transfer and bonding processing. Here we are advancing SWIR photodiodes by using a new generation of narrow bandgap conjugated polymers that are processed by solution processing techniques and allow simple direct deposition. The polymers are processed into bulk heterojunction photodiodes with photoresponse up to wavelength of 1.7 micron. The performances of devices with different polymer structures were compared through metrics including detectivity, quantum efficiency, response time and rectification ratio. Example applications including blood pulse measurements and spectroscopic identification will be demonstrated.

Chinese Characters are important elements of Chinese culture. Digitization techniques of Chinese Characters introduce attractive experiences of Chinese Character culture. The Chinese Character digitization generates large-scale data that is hard handled by traditional methods. To address this issue, in this paper, we propose Chinese Character Culture Big Data Platform that is designed based on the three-level hierarchy of cloud computing. The platform is built by means of open source technologies, for example, Hadoop ecosystem. The platform can effectively store, manage, and analyze large-scale data of digitized Chinese Character for supporting the Chinese Character culture experience application systems. This paper presents design concepts and architecture of the platform, as well as an experiment.