Search

Abstract Despite the prevalent of hexagonal, tetragonal, and triangular pore structures in two-dimensional covalent organic frameworks (2D COFs), the pentagonal pores remain conspicuously absent. We herein present the Cairo pentagonal tessellated COFs, achieved through precisely chosen geometry and metrics of the linkers, resulting in unprecedented mcm topology. In each pentagonal structure, porphyrin units create four uniform sides around 15.5 Å with 90° angles, while tetrabiphenyl unit establish a bottom edge about 11.6 Å with 120° angles, aligning precisely with the criteria of Cairo Pentagon. According to the narrow bandgap and strong near-infrared (NIR) absorbance, as-synthesized COFs exhibit the efficient singlet oxygen (1O2) generation and photothermal conversion, resulting in NIR photothermal combined photodynamic therapy to guide cancer cell apoptosis. Mechanistic studies reveal that the good 1O2 production capability upregulates intracellular lipid peroxidation, leading to glutathione depletion, low expression of glutathione peroxidase 4, and induction of ferroptosis. The implementation of pentagonal Cairo tessellations in this work provides a promising strategy for diversifying COFs with new topologies, along with multimodal NIR phototherapy.

Abstract To explore the optimization method of grid-connected voltage support technology in new energy stations, this study first analyzes and discusses this technology. Second, this study describes the deep learning model architecture and feature selection in detail and determines the framework used for the optimization model proposed here. Lastly, the development of optimization and control strategies is investigated, and the optimized model’s effectiveness is verified through experiments. The results reveal that the optimized model's accuracy, precision, recall, and F1 score are higher than those of the comparison model in the performance comparison experiment, reaching the highest values of 0.890, 0.888, 0.878, and 0.883, respectively. This reflects that the optimized model shows high performance on small datasets, and its performance benefits become more pronounced as the data volume increases. This feature is particularly significant because, in practical applications, power systems often need to process large amounts of data to achieve efficient voltage support. In simulation experiments, the optimized model demonstrates excellent performance in terms of response time, stability, robustness, and energy consumption. Moreover, this model effectively addresses various data challenges and uncertainties encountered in grid-connected voltage support technology for power systems, thereby providing robust support for stable and efficient voltage regulation. In light of the findings, this study offers substantial insights for advancing research in the realms of power systems and new energy technologies. The exploration into the application of deep learning and intelligent control strategies within power systems reveals significant potential for transforming grid optimization practices. This study accentuates how data-driven methodologies can revolutionize energy management, paving the way for smarter and more efficient energy systems. By enhancing both the responsiveness and operational efficiency of power grids, the study contributes to the acceleration of digital transformation within the energy sector, fostering innovation and laying a robust foundation for future advancements in energy informatics.

Abstract The weak AC grid in a modular multilevel converter modular multilevel converter based high voltage direct current (MMC‐HVDC) receiving‐end system requires faster reactive power support from the receiving‐end MMC. However, under the MMC traditional constant AC voltage dual‐loop control strategy, the increase in MMC's reactive power support speed will reduce the system stability. The reactive power cascade control strategy is a novel MMC control strategy. The analysis in this paper demonstrates that it possesses advanced performance under faster reactive power support, which is required by the MMC connected to a weak AC grid, but, some of its control links and operations can cause impacts exceeding that a weak AC grid can undertake. To solve this problem, based on the original control strategy, this paper proposes an improved reactive power cascade control strategy for weak AC grid conditions. The complete framework and the detailed design of primary control links of the improved cascade control strategy are displayed in this paper. Finally, a digital simulation has been conducted to validate the analysis and the proposed improved control strategy in this paper.

Abstract Background Bone marrow mesenchymal stem cells (BMMSCs) are commonly used for cell transplantation to treat refractory diseases. However, the presence of inflammatory factors, such as tumour necrosis factor-alpha (TNF-α), at the transplantation site severely compromises the stemness of BMMSCs, thereby reducing the therapeutic effect of cell transplantation. Aspirin (AS) is a drug that has been in use for over a century and has a wide range of effects, including the regulation of cell proliferation, multidirectional differentiation, and immunomodulatory properties of stem cells. However, it is still unclear whether AS can delay the damaging effects of TNF-α on BMMSC stemness. Methods This study investigated the effects of AS and TNF-α on BMMSC stemness and the molecular mechanisms using colony formation assay, western blot, qRT-PCR, and overexpression or knockdown of YAP and SMAD7. Results The results demonstrated that TNF-α inhibited cell proliferation, the expression of stemness, osteogenic and chondrogenic differentiation markers of BMMSCs. Treatment with AS was shown to mitigate the TNF-α-induced damage to BMMSC stemness. Mechanistic studies revealed that AS may reverse the damage caused by TNF-α on BMMSC stemness by upregulating YAP and inhibiting the expression of SMAD7. Conclusion AS can attenuate the damaging effects of TNF-α on BMMSC stemness by regulating the YAP-SMAD7 axis. These findings are expected to promote the application of AS to improve the efficacy of stem cell therapy.

Abstract Background Occult Macular Dystrophy (OMD), primarily caused by retinitis pigmentosa 1-like 1 (RP1L1) variants, is a complex retinal disease characterised by progressive vision loss and a normal fundus appearance. This study aims to investigate the diverse phenotypic expressions and genotypic correlations of OMD in Chinese patients, including a rare case of Vitelliform Macular Dystrophy (VMD) associated with RP1L1. Methods We analysed seven OMD patients and one VMD patient, all with heterozygous pathogenic RP1L1 variants. Clinical assessments included Best Corrected Visual Acuity (BCVA), visual field testing, Spectral Domain Optical Coherence Tomography (SD-OCT), multifocal Electroretinograms (mfERGs), and microperimetry. Next-generation sequencing was utilised for genetic analysis. Results The OMD patients displayed a range of phenotypic variability. Most (5 out of 7) had the RP1L1 variant c.133 C > T; p.R45W, associated with central vision loss and specific patterns in SD-OCT and mfERG. Two patients exhibited different RP1L1 variants (c.3599G > T; p.G1200V and c.2880G > C; p.W960C), presenting milder phenotypes. SD-OCT revealed photoreceptor layer changes, with most patients showing decreased mfERG responses in the central rings. Interestingly, a unique case of VMD linked to the RP1L1 variant was observed, distinct from traditional OMD presentations. Conclusions This study highlights the phenotypic diversity within OMD and the broader spectrum of RP1L1-associated macular dystrophies, including a novel association with VMD. The findings emphasise the complexity of RP1L1 variants in determining clinical manifestations, underscoring the need for comprehensive genetic and clinical evaluations in macular dystrophies.

Abstract Background Osteosarcoma is a soft tissue neoplasm with elevated recurrence risk and highly metastatic potential. Metal response element binding transcriptional factor 2 (MTF2) has been revealed to exert multiple activities in human tissues. The present research was conducted to explore the functions and related response mechanism of MTF2 in osteosarcoma which have not been introduced yet. Methods Bioinformatics tools identified the differential MTF2 expression in osteosarcoma tissues. MTF2 expression in osteosarcoma cells was examined with Western blot. Cell Counting Kit-8 (CCK-8) assay, 5-Ethynyl-2’-deoxyuridine (EDU) staining, wound healing as well as transwell assays measured cell proliferation, migration and invasion, respectively. Flow cytometry assay detected the cellular apoptotic level. Western blot also measured the expressions of proteins associated with epithelial mesenchymal transition (EMT), apoptosis and enhancer of zeste homolog 2 (EZH2)/secreted frizzled-related protein 1 (SFRP1)/Wnt signaling. Co-immunoprecipitation (Co-IP) assay confirmed MTF2-EZH2 interaction. Results MTF2 expression was increased in osteosarcoma tissues and cells. MTF2 interference effectively inhibited the proliferation, migration and invasion of osteosarcoma cells and promoted the cellular apoptotic rate. MTF2 directly bound to EZH2 and MTF2 silence reduced EZH2 expression, activated SFRP1 expression and blocked Wnt signaling in osteosarcoma cells. EZH2 upregulation or SFRP1 antagonist WAY-316606 partly counteracted the impacts of MTF2 down-regulation on the SFRP1/Wnt signaling and the biological phenotypes of osteosarcoma cells. Conclusions MTF2 might down-regulate SFRP1 to activate Wnt signaling and drive the progression of osteosarcoma via interaction with EZH2 protein.

Neoconidiobolus lachnodes (Drechsler) B. Huang & Y. Nie was originally isolated from plant debris in Florida, United States of America, in 1954. Here, we report the first documented occurrence of N. lachnodes in central China. Morphologically, this fungus is characterized by its abundant aerial hyphae, typically arranged closely, with hyphae aggregating into chlamydospores during the later stages of growth. Phylogenetic analysis revealed that the N. lachnodes isolate from China (RCEF 7519) is closely related to the reference strain N. lachnodes (ARSEF 700). To elucidate the phylogenetic position of N. lachnodes within the Neoconidiobolus lineage, we included two nucleotide sequences of EFL and mtSSU loci. This discovery significantly expands the known geographic distribution of N. lachnodes.

Abstract Revealing the influence of confining pressure on the propagation and formation mechanism of rock cracks under particle impact is significant to deep rock excavation. In this study, the three-dimensional fracture reconstruction of the rock after particle impact was carried out by CT scanning, and the stress and crack field evolution of the rock under particle impact were analyzed by PFC2D discrete element numerical simulation. The results demonstrate that after particles impact, a fracture zone and intergranular main crack propagation zone are formed in the rock. The shear stress and tensile stress caused by compressive stress are the main reasons for the formation of the fracture zone, while the formation of the intergranular main crack propagation zone is mainly due to tangential derived tensile stress. The confining pressure induces prestress between rock particles such that the derived tensile stress needs to overcome the initial compressive stress between the particles to form tensile fractures. And the increase in the confining pressure leads to increases in the proportion of shear cracks and friction effects between rock particles, resulting in an increase in energy consumption for the same number of cracks. From a macroscopic perspective, the confining pressure can effectively inhibit the generation of cracks.

Abstract Background Non-pharmaceutical measures and travel restrictions have halted the spread of coronavirus disease 2019 (COVID-19) and influenza. Nonetheless, with COVID-19 restrictions lifted, an unanticipated outbreak of the influenza B/Victoria virus in late 2021 and another influenza H3N2 outbreak in mid-2022 occurred in Guangdong, southern China. The mechanism underlying this phenomenon remains unknown. To better prepare for potential influenza outbreaks during COVID-19 pandemic, we studied the molecular epidemiology and phylogenetics of influenza A(H3N2) and B/Victoria that circulated during the COVID-19 pandemic in this region. Methods From January 1, 2018 to December 31, 2022, we collected throat swabs from 173,401 patients in Guangdong who had acute respiratory tract infections. Influenza viruses in the samples were tested using reverse transcription-polymerase chain reaction, followed by subtype identification and sequencing of hemagglutinin (HA) and neuraminidase (NA) genes. Phylogenetic and genetic diversity analyses were performed on both genes from 403 samples. A rigorous molecular clock was aligned with the phylogenetic tree to measure the rate of viral evolution and the root-to-tip distance within strains in different years was assessed using regression curve models to determine the correlation. Results During the early period of COVID-19 control, various influenza viruses were nearly undetectable in respiratory specimens. When control measures were relaxed in January 2020, the influenza infection rate peaked at 4.94% (39/789) in December 2021, with the influenza B/Victoria accounting for 87.18% (34/39) of the total influenza cases. Six months later, the influenza infection rate again increased and peaked at 11.34% (255/2248) in June 2022; influenza A/H3N2 accounted for 94.51% (241/255) of the total influenza cases in autumn 2022. The diverse geographic distribution of HA genes of B/Victoria and A/H3N2 had drastically reduced, and most strains originated from China. The rate of B/Victoria HA evolution (3.11 × 10−3, P

Abstract Existing ice particle jet surface treatment technology is prone to ice particle adhesion during application, significantly affecting surface treatment efficiency. Based on the basic structure of the jet pump, the ice particle air jet surface treatment technology is proposed for the instant preparation and utilization of ice particles, solving the problem of ice particle adhesion and clogging. To achieve efficient utilization of ice particles and high-speed jetting, an integrated jet structure for ice particle ejection and acceleration was developed. The influence of the working nozzle position (L d), expansion ratio (n), and acceleration nozzle diameter ratio (D n) length-to-diameter ratio (L n) on the ice particle ejection and acceleration was systematically studied. The structural parameters of the ejector were determined using the impact kinetic energy of ice particles as the comprehensive evaluation index, and the surface treatment test was conducted to verify the results. The study shows that under 2 MPa air pressure, the ejector nozzle parameters of n = 1.5, D n = 4.0, L d = 4, and L n = 0 mm can effectively eject and accelerate the ice particles. The aluminum alloy plate depainting test obtained a larger paint removal radius and resulted in a smoother aluminum alloy plate surface, reducing the surface roughness from 3.194 ± 0.489 μm to 1.156 ± 0.136 μm. The immediate preparation and utilization of ice particles solved the problems of adhesion and storage in the engineering application of ice particle air jet technology, providing a feasible technical method in the field of material surface treatment.

Fractures and bone nonunion commonly require surgical intervention. Serious outcomes of non‐healing in the late stages of fracture place a significant financial burden on society and families. Bone nonunion occurs when a fracture stops healing, for many reasons, and leads to a variety of bad outcomes. Numerous factors, including biomechanics and immunology, are involved in the complicated mechanisms of bone nonunion. The immune‐inflammatory response plays a significant part in the emergence of bone nonunion, and the occurrence, control, and remission of inflammation in the bone healing process have a significant influence on the ultimate success of bone tissue repair. In the bone microenvironment, immune cells and associated cytokines control bone repair, which is significantly influenced by macrophages, T cells, and fibroblast growth factor. To limit acute inflammation and balance osteogenesis and osteoblastogenesis for tissue repair and regeneration, immune cells and various cytokines in the local microenvironment must be precisely regulated. As a bad complication of late‐stage fractures, bone nonunion has a significant effect on patients’ quality of life and socioeconomic development. Therefore, in‐depth research on its pathogenesis and treatment methods has important clinical value. To provide more precise, focused therapeutic options for the treatment of bone nonunion, we discuss the regulatory roles of the key immune cells engaged in bone healing within the microenvironment during bone healing and their effect on osteogenesis.

Objective The orthopedic surgical treatment strategies for patients with tumor‐induced osteomalacia (TIO) require improvement, especially for patients where the causative tumors are located in surgically challenging areas, requiring a greater degree of in‐depth investigation. This work aims to summarize and investigate clinical features and orthopedic surgical treatment effects of patients with tumor‐induced osteomalacia (TIO), whose causative tumors are located in the hip bones. Methods A retrospective analysis was conducted on the clinical data of all patients diagnosed with culprit tumors located in the hip bones who underwent surgical treatment at the orthopedic bone and soft tissue tumor sub‐professional group of Peking Union Medical College Hospital from January 2013 to January 2023. This retrospective study summarized the clinical data, preoperative laboratory test results, imaging findings, surgery‐related data, perioperative changes in blood phosphorus levels, and postoperative follow‐up data of all patients who met the inclusion criteria. Normally distributed data are presented as mean and standard deviation, while non‐normally distributed data are shown as the means and 25th and 75th interquartile ranges. Results The clinical diagnostic criteria for TIO were met by all 16 patients, as confirmed by pathology after surgery. Among the 16 patients, we obtained varying degrees of bone pain and limited mobility (16/16), often accompanied by difficulties in sitting up, walking, and fatigue. An estimated 62.5% (10/16) of patients had significantly shorter heights during the disease stages. All 16 patients underwent surgical treatment for tumors in the hip bones, totaling 21 surgeries. In the pathogenic tumor, there were 16 cases of skeletal involvement and none of pure soft tissue involvement. Out of the 16 patients, 13 cases had a gradual increase in blood phosphorus levels following the latest orthopedic surgery, which was followed up for 12 months to 10 years. Due to unresolved conditions after the original surgery, four patients received reoperation intervention. Two cases of refractory TIO did not improve in their disease course. Conclusion In summary, the location of the causative tumor in the hip bone is hidden and diverse, and there is no defined orthopedic surgical intervention method for this case in clinical practice. For patients with TIO where the tumors are located in the hip bones, surgical treatment is difficult and the risk of postoperative recurrence is high. Careful identification of the tumor edge using precise preoperative positioning and qualitative diagnosis is crucial to ensure adequate boundaries for surgical resection to reduce the likelihood of disease recurrence and improve prognosis.

Tunnelling has increasingly become an essential tool in the exploration of underground space. A typical construction problem is the face instability during tunnelling, posing a great threat to associated infrastructures. Tunnel face instability often occurs with the soil arching collapse. This study investigates the combined effect of cutterhead opening ratio and soil non-uniformity on soil arching effect and face stability, via conducting random finite-element analysis coupled with Monte–Carlo simulations. The results underscore that the face stability is strongly associated with the evolution of stress arch. The obtained stability factors in the uniform soils can serve as a reference for the design of support pressure in practical tunnelling engineering. In addition, non-uniform soils exhibit a lower stability factor than uniform soils, which implies that the latter likely yields an underestimated probability of face failure. The tunnel face is found to have a probability of failure more than 50% if the spatial non-uniformity of soil is ignored. In the end, a practical framework is established to determine factor of safety (FOS) corresponding to different levels of probability of face failure considering various opening ratios in non-uniform soils. The required FOS is 1.70 to limit the probability of face instability no more than 0.1%. Our findings can facilitate the prediction of probability of instability in the conventionally deterministic design of face pressure.

The supercritical carbon dioxide (SC-CO2) jet has a wide application prospect in drilling engineering, and its low coal breaking pressure threshold and high efficiency can improve drilling efficiency. But it has the problems of high coal breaking threshold pressure and system energy consumption, which limits its application. The high pulse pressure and resonance effect of the self-excited oscillation pulse SC-CO2 jet can effectively reduce the coal breaking threshold pressure and significantly improve the coal breaking efficiency. Based on this, the variation law and comprehensive effect of the self-oscillating pulse SC-CO2 jet pulse frequency and pulse pressure amplitude at different target distances were studied. Large eddy simulation was used to analyze the flow field structure of the jet, and the variation laws of the pulse frequency and pressure amplitude in the axial direction of the flow field were clarified. The effect of the target distance on the impact frequency and impact pressure of the jet was studied by pulse characteristics test experiment, and the comprehensive effect of pulse characteristics on coal breaking was studied by coal breaking experiment. It was concluded that the pulse frequency and pulse pressure amplitude of the self-oscillation pulsed SC-CO2 jet do not remain constant in the axial direction of the jet, and they gradually decrease with the increasing target distance. Considering only the pulse frequency cannot maximize the resonance effect, and it is necessary to comprehensively consider the influence of pulse frequency and pressure amplitude on the resonance effect. Using displacement response amplitude to characterize resonance effect can reflect the comprehensive influence of frequency and amplitude on resonance. When the target distance is small, from 0 mm to 15 mm, the main influencing factor of the displacement response amplitude is the pulse pressure amplitude. When the target distance is large, from 15 mm to 30 mm, the main influencing factor is pulse frequency. In addition, reducing the pulse frequency and increasing the pressure amplitude can effectively improve the displacement response amplitude. The transition positions of the main influencing factors of displacement response amplitude under different nozzle structure conditions are different, and the optimal target distance is also not the same. In this study, the optimal target distance for nozzle a is 22 mm, where the displacement response amplitude is the largest and the coal breaking effect is the best, while the optimal target distance for nozzle b is 26 mm.

Abstract Having an accurate understanding of the scale effect of surface morphology characteristics is crucial to examining the mechanical behavior of rock structural plane. At present, the quantification and sampling methods of surface morphology show diversity, which is the potential reason for the inconsistent research conclusions on scale effect. Firstly, based on mathematical statistics and correlation analysis, the most representative parameter is proposed from hundreds of morphological parameters. Then, the previous scale effect sampling methods are analyzed. In order to ensure that the selected samples are representative, a novel sampling method, considering all morphological information, is proposed. By means of the novel quantification and sampling methods, the size effect characteristics are systematically analyzed. Under the conditions of different rock types, shear directions and sampling locations, etc., discontinuity roughness does not change significantly with sampling scale. As sampling scale increases, the distribution range of representative samples is gradually concentrated, the total amount decreases, and the proportion increases. However, the distribution of representative samples on the initial structural plane does not show obvious regularity. These findings would provide theoretical support for the deformation control and stability analysis of rock mass in engineering.

Abstract Background Intestinal necrosis in uremic patients has been reported but is rare. Case presentation A 56-year-old male patient who underwent long-term regular haemodialysis was admitted to the hospital due to involuntary shaking of the limbs and nonsense speech. The patient’s symptoms improved after continuous blood purification under heparin anticoagulation, rehydration, sedation, and correction of electrolyte disturbances. However, the patient experienced a sudden onset of abdominal pain and a rapid decrease in blood pressure; high-dose norepinephrine were required to maintain his blood pressure. A plain abdominal radiograph performed at bedside showed intestinal dilation. Colonoscopy revealed inflammation and oedema of the entire colon, with purulent secretions and multiple areas of patchy necrosis. The cause of intestinal ischaemia was not clear. Conclusions Although rare, previous causes of uremic colitis have been reported. As the patient developed abdominal pain before the onset of shock and the necrosis was seen on colonoscopy, we suspect that this is a case of fulminant uremic colitis.

Abstract Conventional macrolide-lincosamide-streptogramin B-ketolide (MLSBK) antibiotics are unable to counter the growing challenge of antibiotic resistance that is conferred by the constitutive methylation of rRNA base A2058 or its G2058 mutation, while the presence of unmodified A2058 is crucial for high selectivity of traditional MLSBK in targeting pathogens over human cells. The absence of effective modes of action reinforces the prevailing belief that constitutively antibiotic-resistant Staphylococcus aureus remains impervious to existing macrolides including telithromycin. Here, we report the design and synthesis of a novel series of macrolides, featuring the strategic fusion of ketolide and quinolone moieties. Our effort led to the discovery of two potent compounds, MCX-219 and MCX-190, demonstrating enhanced antibacterial efficacy against a broad spectrum of formidable pathogens, including A2058-methylated Staphylococcus aureus, Streptococcus pneumoniae, Streptococcus pyogenes, and notably, the clinical Mycoplasma pneumoniae isolates harboring A2058G mutations which are implicated in the recent pneumonia outbreak in China. Mechanistic studies reveal that the modified quinolone moiety of MCX-190 establishes a distinctive secondary binding site within the nascent peptide exit tunnel. Structure-activity relationship analysis underscores the importance of this secondary binding, maintained by a sandwich-like π–π stacking interaction and a water–magnesium bridge, for effective engagement with A2058-methylated ribosomes rather than topoisomerases targeted by quinolone antibiotics. Our findings not only highlight MCX-219 and MCX-190 as promising candidates for next-generation MLSBK antibiotics to combat antibiotic resistance, but also pave the way for the future rational design of the class of MLSBK antibiotics, offering a strategic framework to overcome the challenges posed by escalating antibiotic resistance.

Background: Cannabidiol (CBD), extracted from Cannabis sativa, has anticancer, anti-inflammation, and analgesic effects. Nevertheless, its therapeutic effect and the mechanism by which it alleviates oral mucositis (OM) remain unclear. Aims: To explore the impact of CBD on OM in mice and on human oral keratinocyte (HOK) cells. Study Design: Expiremental study. Methods: The Traditional Chinese Medicine Systems Pharmacology Database and Analysis Platform, GeneCard, DisGeNET, and Gene Expression Omnibus databases were used to conduct therapeutic target gene screening for drugs against OM. Cytoscape software was used to build networks linking components, targets, and diseases. The STRING database facilitated analysis of intertarget action relationships, and the target genes were analyzed for Kyoto Encyclopedia of Genes and Genomes pathway enrichment. Occurrence of serum inflammation-related factors, hematoxylin and eosin staining, and immunohistochemistry were used to assess OM injury. Cell proliferation, migration, pyroptosis, and apoptosis of HOK cells under different treatments were assessed. Molecular mechanisms were elucidated through western blot and quantitative real-time polymerase chain reaction analyses. Results: A total of 49 overlapping genes were pinpointed as potential targets, with NF-κB1, PIK3R1, NF-κBIA, and AKT1 being recognized as hub genes among them. Additionally, the PI3K/Akt/NF-κB and interleukin-17 signaling pathways were identified as relevant. Our in vivo experiments showed that CBD significantly reduced the proportion of lesion area, mitigated oral mucosal tissue lesions, and downregulated the expression levels of genes and levels of proteins, including NLRP3, P65, AKT, and PI3K. In vitro experiments indicated that CBD enhanced HOK cell proliferation and migration and reduced apoptosis through inhibition of the PI3K/Akt/NF-κB signaling pathway and pyroptosis. Conclusion: Our findings suggest a novel mechanism for controlling OM, in which CBD suppresses the PI3K/Akt/NF-κB signaling pathway and pyroptosis, thereby mitigating OM symptoms.

Abstract As the node positioning of underwater wireless sensor networks is easily affected by tidal motion, ocean current motion and multipath effect, the node positioning accuracy is low. In order to better improve the positioning accuracy of moving nodes of underwater wireless sensor networks, a method of locating mobile nodes of underwater wireless sensor based on tidal motion model is proposed. Firstly, the Time Difference of Arrival (TDOA) localization optimized by niche genetic algorithm is used to initialize each node. The integration of niche technology can effectively find multiple excellent solutions in the solution space, thus providing more abundant solution choices. This algorithm has excellent performance in multi-modal optimization problems, and can avoid the algorithm falling into local optimal solutions, so as to obtain more comprehensive optimization results. The simulation results show that the proposed algorithm has better positioning accuracy than the traditional Chan algorithm and Taylor algorithm. Then, each node is updated in real time by the optimized tidal movement model formula predicted by Kalman filter algorithm. The prediction algorithm is used to compare the real-time predicted update position of the node with the actual position. The positioning distance error of the prediction algorithm is also enough to meet the practical application requirements.

Abstract This work introduces and discusses the impacts of the water bridge on gas adsorption and diffusion behaviors in a shale gas-bearing formation. The density distribution of the water bridge has been analyzed in micropores and meso-slit by molecular dynamics. Na+ and Cl− have been introduced into the system to mimic a practical encroachment environment and compared with pure water to probe the deviation in water bridge distribution. Additionally, practical subsurface scenarios, including pressure and temperature, are examined to reveal the effects on gas adsorption and diffusion properties, determining the shale gas transportation in realistic shale formation. The outcomes suggest carbon dioxide (CO2) usually has higher adsorption than methane (CH4) with a water bridge. Increasing temperature hinders gas adsorption, density distribution decreases in all directions. Increasing pressure facilitates gas adsorption, particularly as a bulk phase in the meso-slit, whereas it restricts gas diffusion by enhancing the interaction strength between gas and shale. Furthermore, ions make the water bridge distributes more unity and shifts to the slit center, impeding gas adsorption onto shale while encouraging gas diffusion. This study provides updated guidelines for gas adsorption and transportation characteristics and supports the fundamental understanding of industrial shale gas exploration and transportation.

Abstract Mitochondrial gene expression relies on mitoribosomes to translate mitochondrial mRNAs. The biogenesis of mitoribosomes is an intricate process involving multiple assembly factors. Among these factors, GTP-binding proteins (GTPBPs) play important roles. In bacterial systems, numerous GTPBPs are required for ribosome subunit maturation, with EngB being a GTPBP involved in the ribosomal large subunit assembly. In this study, we focus on exploring the function of GTPBP8, the human homolog of EngB. We find that ablation of GTPBP8 leads to the inhibition of mitochondrial translation, resulting in significant impairment of oxidative phosphorylation. Structural analysis of mitoribosomes from GTPBP8 knock-out cells shows the accumulation of mitoribosomal large subunit assembly intermediates that are incapable of forming functional monosomes. Furthermore, fPAR-CLIP analysis reveals that GTPBP8 is an RNA-binding protein that interacts specifically with the mitochondrial ribosome large subunit 16 S rRNA. Our study highlights the role of GTPBP8 as a component of the mitochondrial gene expression machinery involved in mitochondrial large subunit maturation.

The SC-CO2 jet drilling and completion technology can ensure the stability of coalbed methane wells, improve drilling speed and rock breaking efficiency, and has a wide application prospect. However, the high energy consumption and complex system of coal breaking limit its engineering application. The impact frequency of self-excited oscillation pulse SC-CO2 jet is the same as the natural frequency of coal and rock mass or satisfies the phase relationship, which can give full play to the resonance effect and achieve a better coal breaking effect. The nozzle structure is the key to affect the jet impact frequency. The existing frequency modulation method of self-resonating pulsed water jet is not suitable for the SC-CO2 jet. In order to realize the modulation of the impact frequency of the SC-CO2 jet, a large eddy simulation was used to study the influence law of different nozzle structures on the impact frequency of self-excited oscillation pulse SC-CO2 jet, and the influence degree of different nozzle structure parameters on jet impact frequency was obtained by weight analysis. The influence rule of nozzle structure on the jet impact frequency and the reliability of jet impact frequency modulation method are verified by jet impact frequency measurement experiment and coal breaking experiment. The results show that the diameter and length of the oscillating cavity, and the angle of the collision wall are the key factors affecting the jet impact frequency. The jet impact frequency can be substantially modulated by adjusting the structure of the oscillating cavity, so as to achieve the resonance effect. By adjusting the oscillating cavity structure, the jet impact frequency forms resonance with the inherent frequency of coal, then the coal breaking effect is significantly improved, and the smaller the resonance multiplier, the better the coal breaking effect of the jet, which can effectively improve the coal breaking efficiency. When the natural frequency of coal is 25 Hz, the outlet diameter of the upstream and downstream nozzle is set as 2.5 mm and 3.0 mm, and the diameter, length and angle of the oscillating chamber are adjusted to 10 mm, 3 mm and 120° respectively. The jet impact frequency reaches 25051.83 Hz, which is 1002.0 times of the natural frequency of coal and forms a resonance effect with the natural frequency of coal, effectively improves the coal breaking efficiency.

Abstract Rhizopus arrhizus is a saprotrophic, sometimes clinically- and industrially-relevant mold (Mucorales) and distributed worldwide, suggesting it can assimilate a broad spectrum of substrates. Here, 69 strains of R. arrhizus were investigated by using the Biolog FF MicroPlate for the profiles of utilizing 95 carbon and nitrogen substrates. The study showed that most R. arrhizus strains were similar in average well color development (AWCD) and substrate richness (SR). Nevertheless, 13 strains were unique in principal component analyses, heatmap, AWCD, and SR analyses, which may imply a niche differentiation within R. arrhizus. The species R. arrhizus was able to utilize all the 95 carbon and nitrogen substrates, consistent with the hypothesis of a great metabolic diversity. It possessed a substrate preference of alcohols, and seven substrates were most frequently utilized, with N-acetyl-d-galactosamine and l-phenylalanine ranking at the top of the list. Eight substrates, especially l-arabinose and xylitol, were capable of promoting sporulation and being applied for rejuvenating degenerated strains. By phenotyping R. arrhizus strains in carbon and nitrogen assimilation capacity, this study revealed the extent of intra-specific variability and laid a foundation for estimating optimum substrates that may be useful for industrial applications.

Abstract Novel therapeutic strategies against difficult-to-treat bacterial infections are desperately needed, and the faster and cheaper way to get them might be by repurposing existing antibiotics. Nanodelivery systems enhance the efficacy of antibiotics by guiding them to their targets, increasing the local concentration at the site of infection. While recently described nanodelivery systems are promising, they are generally not easy to adapt to different targets, and lack biocompatibility or specificity. Here, nanodelivery systems are created that source their targeting proteins from bacteriophages. Bacteriophage receptor-binding proteins and cell-wall binding domains are conjugated to nanoparticles, for the targeted delivery of rifampicin, imipenem, and ampicillin against bacterial pathogens. They show excellent specificity against their targets, and accumulate at the site of infection to deliver their antibiotic payload. Moreover, the nanodelivery systems suppress pathogen infections more effectively than 16 to 32-fold higher doses of free antibiotics. This study demonstrates that bacteriophage sourced targeting proteins are promising candidates to guide nanodelivery systems. Their specificity, availability, and biocompatibility make them great options to guide the antibiotic nanodelivery systems that are desperately needed to combat difficult-to-treat infections.

Abstract Objective Although blood urea nitrogen (BUN) has a crucial impact on many diseases, its effect on outcomes in patients with hyperlipidemia remains unknown. The study aimed to investigate the relationships between BUN levels and all-cause and cardiovascular disease (CVD) mortality in individuals with hyperlipidemia. Methods This analysis comprised 28,122 subjects with hyperlipidemia from the National Health and Nutrition Examination Survey (NHANES) spanning 1999 to 2018. The risk of BUN on mortality was evaluated using weighted Cox regression models. Additionally, to illustrate the dose-response association, the restricted cubic spline (RCS) was used. Results During the observation period, 4276 participant deaths were recorded, of which 1206 were due to CVD. Compared to patients with hyperlipidemia in the third BUN quintile, the hazard ratios (HRs) for all-cause mortality were 1.26 (95% CIs: 1.09, 1.45) and 1.22 (95% CIs: 1.09, 1.37) for patients in the first and fifth quintiles of BUN, respectively. The HRs for CVD mortality among patients in the fifth quintile of BUN were 1.48 (95% CIs: 1.14, 1.93). BUN levels were found to have a U-shaped association with all-cause mortality and a linear association with CVD mortality using restricted triple spline analysis. Conclusions This study revealed that both low and high BUN levels in patients with hyperlipidemia are associated with heightened all-cause mortality. Furthermore, elevated BUN levels are also associated with increased CVD mortality. The findings indicate that patients with hyperlipidemia may face an elevated risk of death if they have abnormal BUN levels.

This study introduces bis[hexakis(nitrato-κ2O,O′)lanthanum(III)] tris[hexaaquanickel(II)] hexahydrate, [La(NO3)6]2[Ni(H2O)6]3·6H2O, with a structure refined in the hexagonal space group R\overline{3}. The salt comprises [La(NO3)6]3− icosahedra and [Ni(H2O)6]2+ octahedra, thus forming an intricate network of interpenetrating honeycomb lattices arranged in layers. This arrangement is stabilized through strong hydrogen bonds. Two successive layers are connected via the second [Ni(H2O)6]2+ octahedra, forming sheets which are stacked perpendicular to the c axis and held in the crystal by van der Waals forces. The synthesis of [La(NO3)6]2[Ni(H2O)6]3·6H2O involves dissolving lanthanum(III) and nickel(II) oxides in nitric acid, followed by slow evaporation, yielding green hexagonal plate-like crystals.