Search

Although drug-eluting stent (DES) has become the standard for percutaneous coronary interventions (PCI) based revascularization, stent thrombosis has emerged as a major cause of death and morbidity for those clinical commonly used permanent stents. Drug-eluting bioresorbable stent (BRS) was thus developed as an alternative to DES, which can be completely absorbed after its therapeutic period. Among them, magnesium (Mg) based BRS has attracted great attention due to its suitable mechanical properties, innovative chemical features and well-proven biocompatibility. In the present work, a Mg–Nd–Zn-Zr (JDBM) based drug-eluting BRS loaded with rapamycin was prepared, and its biosafety and efficacy for coronary artery stenosis were evaluated via in vitro and in vivo experiments. The smooth muscle cells adhesion of PDLLA/RAPA coated alloy and the rapamycin pharmacokinetics of JDBM BRS were first assessed in vitro. JDBM BRS and commercial DES Firehawk were then implanted in the coronary arteries of a porcine model. Neointimal hyperplasia was evaluated at 30, 90, and 180 days, and re-endothelialization was evaluated at 30 days. Furthermore, Micro-CT and optical coherence tomography (OCT) analysis were performed to evaluate the technical feasibility and biocompatibility of JDBM alloy based drug-eluting BRS in vivo. The results showed the inhibition ability of PDLLA/RAPA coated JDBM to smooth muscle cells adhesion and moderate drug release rate of JDBM BRS, demonstrating good anti-restenosis ability in vitro. In vivo, low local and systemic risks of JDBM alloy based BRS was demonstrated in the porcine model. We also showed that this novel BRS was associated with a comparable efficacy profile and high anti-restenosis performance. These findings may confer long term advantages for the use of this BRS over a traditional DES.

In this work, rapamycin-eluting poly (d, l-lactic acid) coating (PDLLA/RAPA) was prepared on biodegradable Mg-Nd-Zn-Zr alloy (JDBM) for both in vitro and in vivo investigation of the degradation behaviors of the magnesium alloy stent platform. Electrochemical tests and hydrogen evolution test demonstrated significant in vitro protection of the polymeric coating against magnesium degradation both in short and long term. The 3-month in vivo study on the RAPA-eluting JDBM stent implanted into porcine coronary arteries confirmed its favorable safety, and in the meanwhile revealed similar neointima proliferation compared to the second generation DES Firebird 2 with no occurrence of adverse complications. Moreover, Micro-CT examination combined with IVUS and OCT detection indicated a remarkably lower degradation rate and prolonged radial supporting duration of the drug-eluting JDBM stent as compared to the bare, attributable to the protection of the coating in vivo. Hence, rapamycin-eluting JDBM stents exhibit great potential for clinical application.

To understand the possible influence of substrate degradation on the drug-loading system of magnesium alloy-based drug-eluting stents, a rapamycin drug-loading poly(lactic-co-glycolic acid) coating was prepared on Mg-Nd-Zn-Zr stents for a systematic investigation in a phosphate buffer system. Mg degradation accelerated the drug release kinetics prominently, which was mainly attributed to H2 evolution in the diffusion-controlled phase while thereafter to PLGA erosion. Although physiochemical stability of the released rapamycin was partially deteriorated by magnesium degradation, the drug-loading system on magnesium substrates exhibited a more potent long-term inhibition on smooth muscle cell proliferation in vitro as compared to drug-loaded stainless steel.

The performance of biodegradable magnesium alloy stents (BMgS) requires special attention to non-uniform residual stress distribution and stress concentration, which can accelerate localized degradation after implantation. We now report on a novel concept in stent shape optimization using a finite element method (FEM) toolkit. A Mg-Nd-Zn-Zr alloy with uniform degradation behavior served as the basis of our BMgS. Comprehensive in vitro evaluations drove stent optimization, based on observed crimping and balloon inflation performance, measurement of radial strength, and stress condition validation via microarea-XRD. Moreover, a Rapamycin-eluting polymer coating was sprayed on the prototypical BMgS to improve the corrosion resistance and release anti-hyperplasia drugs. In vivo evaluation of the optimized coated BMgS was conducted in the iliac artery of New Zealand white rabbit with quantitative coronary angiography (QCA), optical coherence tomography (OCT) and micro-CT observation at 1, 3, 5-month follow-ups. Neither thrombus or early restenosis was observed, and the coated BMgS supported the vessel effectively prior to degradation and allowed for arterial healing thereafter. The proposed shape optimization framework based on FEM provides an novel concept in stent design and in-depth understanding of how deformation history affects the biomechanical performance of BMgS. Computational analysis tools can indeed promote the development of biodegradable magnesium stents., National Institutes of Health (Grant R01-GM49039)

Biodegradable magnesium alloy stents exhibit deficient corrosion period for clinic applications, making the protective polymer coating more crucial than drug-eluting stents with the permanent metal scaffold. We implemented a cohesive method based on a finite element analysis method to predict the integrity of adhesive between coating and stent during the crimping and deployment. For the first time, the three-dimensional quantitative modeling reveals the process of polymer coating delamination and stress concentration. The fracture and microcracks of coatings were consistent with the simulation result, confirmed by the scanning electron microscopy observation. Moreover, we analyzed four possible factors, i.e., stent design, strut material, coating polymer, and thickness of the coating, affecting the stent-coating damage and the distribution of the stress in coatings. Mg-Nd-Zn-Zr alloy with lower yield strength performed a more uniform strain distribution and more favorable adhesion of the coating than the commercial magnesium alloy AZ31. Shape optimization of stent design improves the strain and stress distribution of coating remarkably, avoiding coating delamination. Additionally, PLGA coating with lower elastic modulus and yield strength tends to follow the deformation of the stent better and to adhere on the surface more tightly, compared to PLLA polymer. A reduction in coating thickness and an increase in the strength of stent-coating interface improve the resistance to delamination. Our framework based on cohesive method provides an in-depth understanding of stent-coating damage and shows the way of computational analyses could be implemented in the design of coated biodegradable magnesium stents.

Laryngeal squamous cell carcinoma (LSCC) is one of the most common head and neck cancers, with high mortality and incidence. MicroRNA-26a (miR-26a) is involved in the development and progression of several tumours. However, the roles of miR-26a and its target CKS2 in LSCC progression are not yet clear. The mRNA and protein expression was determined using RT-PCR and Western blotting assay, respectively. Cell proliferation was detected using a Cell Counting kit-8 assay (CCK-8). Transwell assay was used to evaluate cell migration and invasion. Dual-luciferase reporter assay was applied to determine the relationship between miR-26a and CKS2. In addition, a tumour xenograft model in nude mice was established to further determine the effects of miR-26a on tumourigenesis. In this study, we found that miR-26a level was down-regulated in LSCC tissues and cell lines, while CKS2 expression was increased. Cell proliferation, migration, invasion and the expression of MMP2 and MMP9 was suppressed by miR-26a overexpression, but enhanced by inhibition of miR-26a. Dual-luciferase reporter assay demonstrated that CKS2 is a direct target of miR-26a in AMC-HN-8 cells. Overexpression of miR-26a caused a significant reduction in CKS2 expression, and reinforced expression of CKS2 abolished the tumour-suppressive function of miR-26a. Moreover, miR-26a inhibited tumour growth in vivo. Taken together, miR-26a inhibited proliferation and tumourigenesis of LSCC via targeting CKS2 in vitro and in vivo.

Nasopharyngeal carcinoma (NPC) is frequently seen in Chinese, especially the population that resides in southeast China. Metastasis-associated protein 1 (MTA1) is a chromatin modifier and plays a role in tumor cell metastasis. IQGAP1 is a ubiquitously expressed protein that contributes to cytoskeleton remodeling. This study aimed to investigate the role of MTA1 and IQGAP1 in NPC malignant transformation. MTA1 and IQGAP1 expression in NPC (n=43) and control tissues (n=31) were detected using qRT-PCR, immunoblot and immunohistochemistry. MTA1 was overexpressed in CNE-1 and CNE-2 cell line by pcDNA3.1/MTA1 transfection. Dominant-negative p53 was transfected to inhibit p53 activity. si-IQGAP1 or dominant-negative IQGAP1 (IQGAP1?GRD) was used to suppress IQGAP1 activity. Cell proliferation was measured by CKK-8 assay. Cell migration was evaluated by Transwell assay. The results showed that MTA1 and IQGAP1 were highly expressed in NPC tissues compared with the controls. Forced expression of MTA1 accelerated cell proliferation and migration and upregulated IQGAP1 expression in a p53-independent way. Knockdown of IQGAP1 or transfection of dominant-negative IQGAP1 impeded tumor cell proliferation and migration as well as PI3K/Akt signaling induced by MTA1. In conclusion, MTA1 participates in NPC malignant transformation via regulating IQGAP1 expression and PI3K/Akt signaling pathway. This article is protected by copyright. All rights reserved

Recently magnesium and its alloys have been proposed as a promising next generation orthopedic implant material, whereas the poor corrosion behavior, potential cytotoxicity, and the lack of efficient drug delivery system have limited its further clinical application, especially for the local treatment of infections or musculoskeletal disorders and diseases. In this study, we designed and developed a multifunctional bilayer composite coating of poly(lactic acid)/brushite with high interfacial bonding strength on a Mg-Nd-Zn-Zr alloy, aiming to improve the biocorrosion resistance and biocompatibility of the magnesium-based substrate, as well as to further incorporate the biofunctionality of localized drug delivery. The composite coating consisted of an inner layer of poly(lactic acid) serving as a drug carrier and an outer layer composed of brushite generated through chemical solution deposition, where a facile pretreatment of UV irradiation was applied to the poly(lactic acid) coating to facilitate the heterogeneous nucleation of brushite. The in vitro degradation results of electrochemical measurements and immersion tests indicated a considerable reduction of magnesium degradation provided the composite coating. A systematic investigation of cellular response with cell viability, adhesion, and ALP assays confirmed the coated Mg alloy induced no toxicity to MC3T3-E1 osteoblastic cells but rather fostered cell attachment and proliferation and promoted osteogenic differentiation, revealing excellent biosafety and biocompatibility and enhanced osteoinductive potential. An in vitro drug release profile of paclitaxel from the composite coating was monitored with UV-vis spectroscopy, showing an alleviated initial burst release and a sustained and controlled release feature of the drug-loaded composite coating. These findings suggested that the bilayer poly(lactic acid)/brushite coating provided effective protection for Mg alloy, greatly enhanced cytocompatibility and bioactivity, and, moreover, possessed local drug delivery capability; hence magnesium alloy with poly(lactic acid)/brushite coating presents great potential in orthopedic clinical applications, especially for localized bone therapy.

A strategy of suppressing the fast degradation behaviour of Mg-based biomaterials by the introduction of one of Mg degradation products Mg(OH)2 was proposed according to the following degradation mechanism, Mg + 2H2O ⇋ Mg(OH)2 + H2↑. Specifically, Mg(OH)2 submicron particles were mixed into poly (L-lactic acid) (PLLA) to synthesize a composite coating onto hydrofluoric acid-pretreated Mg-Nd-Zn-Zr alloy. The in vitro degradation investigations showed that the addition of Mg(OH)2 particles not only slowed down the corrosion of Mg matrix, but also retarded the formation of gas pockets underneath the polymer coating. Correspondingly, cytocompatibility results exhibited significant improvement of proliferation of endothelial cells, and further insights was gained into the mechanisms how the introduction of Mg(OH)2 particles into PLLA coating affected the magnesium alloy degradation and cytocompatibility. The present study provided a promising surface modification strategy to tailor the degradation behaviour of Mg-based biomaterials.

Fluoride treatment is a commonly used technique or pre-treatment to optimize the degradation kinetic and improve the biocompatibility of magnesium-based implant. The influence of changed surface properties and degradation kinetics on subsequent protein adsorption and cytocompatibility is critical to understand the biocompatibility of the implant. In this study, a patent magnesium alloy Mg–Nd–Zn–Zr alloy (JDBM) designed for cardiovascular stent application was treated by immersion in hydrofluoric acid. A 1.5 μm thick MgF2 layer was prepared. The surface roughness was increased slightly while the surface zeta potential was changed to a much more negative value after the treatment. Static contact angle test was performed, showing an increase in hydrophilicity and surface energy after the treatment. The MgF2 layer slowed down in vitro degradation rate, but lost the protection effect after 10 days. The treatment enhanced human albumin adsorption while no difference of human fibrinogen adsorption amount was observed. Direct cell adhesion test showed many more live HUVECs retained than bare magnesium alloy. Both treated and untreated JDBM showed no adverse effect on HUVEC viability and spreading morphology. The relationship between changed surface characteristics, degradation rate and protein adsorption, cytocompatibility was also discussed.