Search

This paper presents the design and development of an experimental setup that allows measurement of the Giant Magneto-Impedance (GMI) response of Co-rich amorphous micro-wires under tensile stress. A full description of the setup and the first performed measurements are given.

International audience

International audience; In the Giant Magneto-Impedance (GMI) sensors, one of the important features that limit thedetection performance is the equivalent magnetic noise level. In the white noise region, theperformance is mainly limited by the noise from the electronic conditioning not by the intrinsicnoise of the sensing element [1].Digital approaches for the electronic conditioning of these sensors were introduced in recentworks [1]-[2]. These promising approaches and the related software are commonly known asSoftware Defined Radio (SDR). They are based on a direct sampling of the voltage across thesensitive element using an Analog-to-Digital Converter (ADC). The amplitude-demodulation isthen digitally achieved using a Direct-Down-Conversion (DDC) to obtain the final sensor output.By far, this DDC generally includes a local Numerically-Controlled Oscillator (NCO), a set ofdigital filters, multipliers and digital gain as well asrounding circuits(necessary for the real-timeprocessing since only a limited number of bits can be processed by the hardware). All of theseinvolved digital functions are sources of noise [3].In this paper, thekey rules for the real-time implementation of these digital functions arepresented. The idea is to clearly show that the optimization of the noise performance requiresstringent implementation rules. These rules include, but are not limited to, the choice of theparameters of the NCO, the type andthe number of coefficients of the digital filters, the size ofaccumulators of the multipliers and of the rounding circuits. By respecting the proposed rules,the noise of the DDC can be less than the Least Significant Bit (LSB) of the ADC. In this case,the noise of the sensor in the white noise region is mainly dominated by the ADC.To validate the concept, a prototype of an on off-diagonal GMI sensor was developed using a 12-bit ADC having a sampling frequency of 125 MHz. The DDC was implemented using a Field-Programmable-Gate-Array (FPGA). With this realization, performance of 1.8 pT/√Hz isobtained in the white noise region (for sensitive element of 25 mm long). Improving the noiseperformance requires the use of an ADC with high resolution and/or higher sampling frequency.We show that with a technological jump of the ADC technology, the intrinsic noise of the sensitive element could be achieved with the digital concept.

International audience; The impact of the influence quantitiessensors has become a hot topic of interest in the last years [versus the temperature changes in a real measurement environmentmanufacturers and industrial buyersrich amorphous wires(Co-Fecomponent, Z21, of the impedance tensorintrinsic sensitivity and offsetimplementation.The sample was awire was supplied by an AC current of 1 MHz frequency and 5 mA amplitude.about 800 turns was also wound around the wirecase, a DC current of 10 mAwires with circumferential anisotropy) was also supplied to the wireinside a regulated thermal chamber. Experiments were conducted in the temperatures range of[-20 °C, 120 °C].The impedance For the componentZ11, the results have showed afield, of -0.13 (A/m)/°C (170 nT/°C)between -20 °C and +40 °C, and then itdecreaseddiagonal component, Z21, the change of the offset near the zero(A/m)/°C or-19 nT/°C), while tthe range of [-20 °C, 120 °C].

International audience; Giant-Magneto-Impedance (GMI)sensors measure the magnetic field produced by the currentconfiguration of the sensor, the GMI element (a wire for example) circles the conductormeasured current, Im[1] & [2]. Tresulting in a modification ofthe sensor response and consequently incan be encountered when the sensor is subjectedfield and those produced by otheanalytical model to explain the effect of the conductorthe GMI response. In the case ofobtained. This response is modified when the conductor is eccentric. The analytical developed modelallows predicting this modified response.the eccentric conductor, along the sensitive wireresponse which is calculated and predicted by1(a) illustrates a reference GMI cuthe calculated curve when the conductor is eccentric.Fig.1. Analytical prediction of the responseFigure 1(b) shows the experimentaldeformed. This deformation, attributed to the extended to also take into account the effect of the surrounding magorigins of disturbance, along the sensitiresponse as it will be presented in the full paper.

International audience; The digital electronic conditioning for the high sensitivity Giant Magneto-Impedance (GMI)Similar interest in digital electronics wastioning of orthogonal fluxgate sensors in fundamental mode[3]. Byfar, such electronics is mainly composed of a Direct Digital Synthesizer (DDS) which supplies, to the sensitive element. The voltage across theDigital Converter (ADC).Down-Converter (DDC).This DDC mainly includes local digital oscillator (or NCO for Numerically-Controlled-, and digital low-passdecimation filters. These involved functions in such digital conditioning can be realized usingspecific integrated circuit)[1-2] or high-costIn this paper, a new concept for the implementation ofthis digital electronic conditioning for the GMI sensors is presented. This concept is based on theArray (FPGA) reconfigurable circuits. When compared withASICs, the FPGA exhibits advantages such as the high degree of flexibility in theThe architecture of a developeddiagonal GMI sensor using FPGA is illustrated in Fig. 1.

International audience; Fully digital electronics forworks [1-3]. The promising achievedwhite noise region [4]) in openfullmagnetometer.In this paperThe sensitive element was a CoFeSiB wirepick-up coil. The excitation currentvoltage across the pick-up coil was directly sampled by an AnalogThe digital demodulation (or Digital Down Conversion)from a Numerically-Controlleddigital filters). The digital output was converted into theAnalog Converter (DAC). The resulting voltage,field, Bf, using a resistor, Rf, and a 220static gains of the direct chain and of the feedback,functioning of the digital magnetometer, tT/V) so as the theoretical sensitivity,case, the measured sensitivityIt is to note that, on one hand,optimization of the sensitivity andof the noise level of themagnetometer was performed atthis stage. On another hand, thedigital processingintroduces sometime-delay which could impactthe stability of the loop. In thecurrent design, a delay of44μswas estimated andmeasured.This small delay shouldimpose a maximum frequencythe measured fields

International audience; In some applications of Giant Magnetosensors where the sensitive element must be deformed to be aligned with the magnetic fieldproduced by the measured current. This deformation inducesstress which was addressed in [1impact on the GMI characteristics washas beenstudiedin Co-rich amorphous wirescomponent, Z21, of the impedance tensor were consideredμ diameter and 90 mm length from Unitika.around the wire. The later DC current (necessary for the apparition of the offcircumferential anisotropy) was anegative angles with respect to the reference position corresponding to theposition of the wire. For comparison purposes only,function of the rotation anglerelated to the modification the magnetoof this the induced torsion at this anglesensitivity and offset were measured as a function of the rotation angle.The results showed that, for a DC current of 5 mA,the sensitivity of the diagonal combias field was slightly increased for angles betwee-90° to °+90, while this sensitivity wasconstant for the off-diagonal component at zerofield. The intrinsic offset in the diagonalconfiguration was almost constant for theconsidered rotation angles, while this offset wasincreased in the off-diagonal configuration.

National audience

National audience

National audience

National audience

National audience

National audience

International audience

International audience

International audience; Giant Magneto-Impedance (GMI) is a large change of the high frequency impedance of somesoft magnetic materials when they are subjected to an external magnetic field. This effect can beused to realizemagnetic sensors based on the impedance measurement of the sensitiveelement.Despite the great advantages of the GMI such as the high sensitivity, the potential ofminiaturization as well as the large bandwidth, there is still only a few concrete or industrialachievements of these sensors.One of the key features of these GMI sensors is their ability to measure both DC and ACmagnetic fields by the same sensitive element. This feature is of great value for a large palette ofapplications like the contactless current measurement(based on the measurement of the magneticfield produced by the measured current [1]).For this application, the mechanical flexibility ofsome GMI elements (like amorphous wires) is also another key andvery useful feature forrealizing toroidal flexible sensors (the sensing element forms a loop around the conductor ofinterest). Such flexible sensors are needed in many industrial environments where rigid toroidalstructures of the current sensor are not convenient.This paperpresents an overview of a full attempt of design andrealization of a quasi-industrialGMI-based currentsensor. The sensor combines DC/AC measurements in a same flexiblesensitive element. The paper addresses several practical problems encountered in a realmeasurement environment. In this context, main attention is paid to the impact of the influencequantities that largely condition the implementation strategies and solutions of the sensor. For theintended industrialapplication,these influence quantitiesfirstly include the operating temperature[2]. Its impact on the intrinsic sensor response is addressed in a quasi-industrial temperaturerange. Secondly, bending stress on the sensitive element is another involved influence parameterin the toroidal and flexible structure. This constraint effect is also characterized [3] - [4]. Finally,the third considered influence parameter is the effect of magnetic disturbances such as theeccentricity of the conductor of interest and the impact of the surrounding magnetic fields (earthfield or fields produced by others conductors in close proximity to the sensor). Differentstrategies of implementation and solutions, taking into account the impact of influenceparameters, are proposed and compared. A sensor prototype is realized and its performances aregiven and discussed .

International audience

In this paper, we propose a general model to evaluate the equivalent magnetic noise for an off-diagonal giant magneto-impedance (GMI) sensor utilizing a software-defined radio (SDR) as a digital receiver. Based on this SDR approach, an analog-to-digital conversion (ADC) of the voltage induced by the sensing element is directly performed. The signal processing is digitally achieved in real time. It includes a digital quadrature demodulation, a decimation, and a filtering. The approach allows to give the key rules for quantifying the white noise level of this digital implementation. The voltage noise spectral density of the ADC and of each SDR stage is given. The white noise level expected by the modeling was in good agreement with the measurements. With a sensing element composed of a 400 turn coil wound around a co-rich GMI wire, equivalent magnetic noise levels of 220 and 4.2 pT/ $\sqrt {Hz}$ were obtained at 1 Hz and in the white noise region, respectively. The potential improvement of these performances, allowed by this digital conditioning, as well as limitations is also discussed.

International audience

National audience

International audience

International audience

International audience

International audience