Search

Current reports of thermal expansion coefficients (TEC) of two-dimensional (2D) materials show large discrepancies that span orders of magnitude. Determining the TEC of any 2D material remains difficult due to approaches involving indirect measurement of samples that are atomically thin and optically transparent. We demonstrate a methodology to address this discrepancy and directly measure TEC of nominally monolayer epitaxial WSe2 using four-dimensional scanning transmission electron microscopy (4D-STEM). Experimentally, WSe2 from metal-organic chemical vapor deposition (MOCVD) was heated through a temperature range of 18-564 °C using a barrel-style heating sample holder to observe temperature-induced structural changes without additional alterations or destruction of the sample. By combining 4D-STEM measurements with quantitative structural analysis, the thermal expansion coefficient of nominally monolayer polycrystalline epitaxial 2D WSe2 was determined to be (3.5 ± 0.9) × 10-6 K-1 and (5.7 ± 2) × 10-5 K-1 for the in- and out-of-plane TEC, respectively, and (3.6 ± 0.2) × 10-5 K-1 for the unit cell volume TEC, in good agreement with historically determined values for bulk crystals.

Defect engineering of van der Waals semiconductors has been demonstrated as an effective approach to manipulate the structural and functional characteristics toward dynamic device controls, yet correlations between physical properties with defect evolution remain underexplored. Using proton irradiation, we observe an enhanced exciton-to-trion conversion of the atomically thin WS2. The altered excitonic states are closely correlated with nanopore induced atomic displacement, W nanoclusters, and zigzag edge terminations, verified by scanning transmission electron microscopy, photoluminescence, and Raman spectroscopy. Density functional theory calculation suggests that nanopores facilitate formation of in-gap states that act as sinks for free electrons to couple with excitons. The ion energy loss simulation predicts a dominating electron ionization effect upon proton irradiation, providing further evidence on band perturbations and nanopore formation without destroying the overall crystallinity. This study provides a route in tuning the excitonic properties of van der Waals semiconductors using an irradiation-based defect engineering approach.

Using four-dimensional scanning transmission electron microscopy, we demonstrate a method to visualize grains and grain boundaries in WSe2 grown by metal organic chemical vapor deposition (MOCVD) directly onto silicon dioxide. Despite the chemical purity and uniform thickness and texture of the MOCVD-grown WSe2, we observe a high density of small grains that corresponds with the overall selenium deficiency we measure through ion beam analysis. Moreover, reconstruction of grain information permits the creation of orientation maps that demonstrate the nucleation mechanism for new layers-triangular domains with the same orientation as the layer underneath induces a tensile strain increasing the lattice parameter at these sites.

We report innovative scalable, vertical, ultra-sharp nanowire arrays that are individually addressable to enable long-term, native recordings of intracellular potentials. Stable amplitudes of intracellular potentials from 3D tissue-like networks of neurons and cardiomyocytes are obtained. Individual electrical addressability is necessary for high-fidelity intracellular electrophysiological recordings. This study paves the way toward predictive, high-throughput, and low-cost electrophysiological drug screening platforms.

High‐quality quasi‐2D perovskites in a GaN nano‐wire matrix are grown to build a 3D hetero‐structure for high‐performance X‐ray sensing. In the 3D hetero‐structure, GaN nano‐wire matrix serves as an n‐type charge collector that can rapidly extract carriers through the bulk film of the perovskite layer. Together with a p‐type top electrode, a p–i–n diode with the 3D hetero‐structure is built, that exhibits a rectified current–voltage characteristic. After analyzing the interface energy alignment, it is found that the fermi levels of the perovskite and GaN are aligned in the dark, and a quasi‐fermi level splits upon illumination, introducing a built‐in electrical field at the interface. As a result, strong photo‐induced current is observed from the diode without an external field. Finally, the 3D diode for X‐ray detection demonstration is used, revealing a sensitivity of 308.9 µC Gyair−1 cm−2 at an exceptionally low applied field of 0.125 V µm−1. The X‐ray‐induced signal from the 3D diode is stable after 155 cycles of X‐ray irradiation under a constant electric field. This demonstration informs a new 3D architecture for high‐performance X‐ray sensing, and it shows that GaN is a robust n‐type interface for perovskite optoelectronic devices. [ABSTRACT FROM AUTHOR]

We present a single-step nonthermal plasma method for the synthesis of near-infrared (NIR)-emitting and water-soluble Si quantum dots (QDs) for bioimaging applications. Oxygen gas and water vapor were introduced together with acrylic acid (AA) into the afterglow region of the synthesis plasma leading to the surface functionalization of the upstream synthesized Si QDs. The simultaneous surface oxidation and ligand grafting enabled solubility and colloidal stability of the Si QDs in water, as evidenced by strongly reduced hydrodynamic diameters. Aged Si QDs in water emitted NIR photoluminescence (PL) at around 830 nm. The PL quantum yield of the Si QDs in water increased over time from initially undetectable to ∼30% after 8 days. Cell viability tests showed that >70% of 3T3 cells survived for 24 h at a concentration of 200 μg/mL of oxidized AA grafted Si QDs. The water solubility, NIR emission with a high quantum yield, and cell viability make the Si QDs promising for bioimaging applications. [ABSTRACT FROM AUTHOR]

Safe and efficient operation of lithium ion batteries requires precisely directed flow of lithium ions and electrons to control the first directional volume changes in anode and cathode materials. Understanding and controlling the lithium ion transport in battery electrodes becomes crucial to the design of high performance and durable batteries. Recent work revealed that the chemical potential barriers encountered at the surfaces of heteromaterials play an important role in directing lithium ion transport at nanoscale. Here, we utilize in situ transmission electron microscopy to demonstrate that we can switch lithiation pathways from radial to axial to grain-by-grain lithiation through the systematic creation of heteromaterial combinations in the Si-Ge nanowire system. Our systematic studies show that engineered materials at nanoscale can overcome the intrinsic orientation-dependent lithiation, and open new pathways to aid in the development of compact, safe, and efficient batteries.

Recent advances in 3D/2D heterostructures have opened up tremendous opportunities in building highly flexible and durable optoelectronic devices. However, the inherit lack of interfacial bonding and low surface energy of van der Waals surfaces limit the nucleation and growth of 3D materials. Enhancing wettability by providing a porous buffer is effective in growing compound semiconductors on graphene while van der Waals epitaxy of Ge remains challenging. Here, the nucleation of Ge has been significantly improved from an islanded mode to granular modes by using a TiN/AlN multilayered buffer prior to Ge/graphene integration. Highly textured Ge growth with dominating (111), (220), and (311) peaks are identified by x-ray diffraction. The microstructure of the buffer TiN/AlN demonstrates a polycrystalline quality with clean interfaces between each interlayer and the substrate. Kelvin probe force microscopy measurements along the lateral TiN/AlN interface identify a potential drop corresponding to the AlN phase. This contact potential difference between TiN and AlN is the key in generating the out-of-plane dipole moment that modifies the surface energy of the monolayer graphene, resulting in enhanced wettability of the Ge adatoms nucleated on top. Surface dipole induced nucleation of 3D semiconductor thin films on 2D materials via the proper design of buffer layer is fundamentally important to enhance the 3D/2D growth toward flexible optoelectronic applications. [ABSTRACT FROM AUTHOR]

The discovery of topological Hall effect (THE) has important implications for next‐generation high‐density nonvolatile memories, energy‐efficient nanoelectronics, and spintronic devices. Both real‐space topological spin configurations and two anomalous Hall effects (AHE) with opposite polarity due to two magnetic phases have been proposed for THE‐like feature in SrRuO3 (SRO) films. In this work, SRO thin films with and without THE‐like features are systematically Investigated to decipher the origin of the THE feature. Magnetic measurement reveals the coexistence of two magnetic phases of different coercivity (Hc) in both the films, but the hump feature cannot be explained by the two channel AHE model based on these two magnetic phases. In fact, the AHE is mainly governed by the magnetic phase with higher Hc. A diffusive Berry phase transition model is proposed to explain the THE feature. The coexistence of two Berry phases with opposite signs over a narrow temperature range in the high Hc magnetic phase can explain the THE like feature. Such a coexistence of two Berry phases is due to the strong local structural tilt and microstructure variation in the thinner films. This work provides an insight between structure/micro structure and THE like features in SRO epitaxial thin films. [ABSTRACT FROM AUTHOR]