Search

Purpose: The safety of online contouring and planning for adaptive radiotherapy is unknown. This study aimed to evaluate the dosimetric difference of the organ-at-risk (OAR) according to the extent of contouring in stereotactic magnetic resonance image-guided adaptive RT (SMART) for pancreatic cancer. Materials and Methods: We reviewed the treatment plan data used for SMART in patients with pancreatic cancer. For the online contouring and planning, OARs within 2 cm from the planning target volume (PTV) in the craniocaudal direction were re-controlled daily at the attending physician's discretion. The entire OARs were re-contoured retrospectively for data analysis. We termed the two contouring methods the Rough OAR and the Full OAR, respectively. Purpose: The safety of online contouring and planning for adaptive radiotherapy is unknown. This study aimed to evaluate the dosimetric difference of the organ-at-risk (OAR) according to the extent of contouring in stereotactic magnetic resonance image-guided adaptive RT (SMART) for pancreatic cancer. Materials and Methods: We reviewed the treatment plan data used for SMART in patients with pancreatic cancer. For the online contouring and planning, OARs within 2 cm from the planning target volume (PTV) in the craniocaudal direction were re-controlled daily at the attending physician's discretion. The entire OARs were re-contoured retrospectively for data analysis. We termed the two contouring methods the Rough OAR and the Full OAR, respectively. The proportion of dose constraint violation and other dosimetric parameters was analyzed. Results: Nineteen patients with 94 fractions of SMART were included in the analysis. The dose constraint was violated in 10.6% and 43.6% of the fractions in Rough OAR and Full OAR methods, respectively (p = 0.075). Patients with a large tumor, a short distance from gross tumor volume (GTV) to OAR, and a tumor in the body or tail were associated with more occult dose constraint violations--large tumor (p = 0.027), short distance from GTV to OAR (p = 0.061), tumor in body or tail (p = 0.054). No dose constraint violation occurred outside 2 cm from the PTV. Conclusion: More occult dose constraint violations can be found by the Full OAR method in patients with pancreatic cancer with some clinical factors in the online re-planning for SMART. Re-contouring all the OARs would be helpful to detect occult dose constraint violations in SMART planning. Since the dosimetric profile of SMART cannot be represented by a single fraction, patient selection for the Full OAR method should be weighted between the clinical usefulness and the time and workforce required. [ABSTRACT FROM AUTHOR]

ABSTRACTMany patients and guardians prefer not to have teeth extracted as part of orthodontic treatment. Modified C-Palatal Plates (MCPPs) have been developed as an effective oral appliance. The design and procedure for placing these appliances involve a sequence of steps and specialized instruments such as a miniscrew driver. By understanding the biomechanics associated with MCPP placement, molar positioning can be optimized with less distal tipping and greater distalization. In addition to recognizing the various advantages of MCPPs, the implications of MCPPs should be considered, including the following: how far back the molars need to be moved, the effects of second and third molars in adolescents, the effects in maxillary pneumatization cases, potential impact on the airway, long-term stability, and a comparison of MCPPs to headgear. The purpose of this report is to introduce MCPP as an oral appliance that uses both miniscrews and miniplates to efficiently distalize molars minimizing the need for extraction.

Abstract The aim of this study was to evaluate the intra- and inter-observer reliability of maxillary digital dental model integration into cone-beam computed tomography (CBCT) scans to reconstruct three-dimensional (3D) skeletodental models for orthognathic patients. This retrospective study consisted of CBCT and digital maxillary dentition images of 20 Class III orthognathic patients. After two repeated fusions of digital cast images with reconstructed CBCT images by a digital engineer and an orthodontist respectively, the 3D coordinate values of the canines, first molars, and central incisors were evaluated. The intra- and inter-observer reliability of 3D positions of maxillary teeth were compared using intraclass correlation coefficients (ICCs). Intra-observer reliability of x-, y-, and z-coordinate values of maxillary teeth showed significant and excellent agreement in an engineer (0.946 ≤ ICC ≤ 1.000) and an orthodontist (0.876 ≤ ICC ≤ 1.000). The inter-observer reliability of the y- and z-coordinates of each tooth was significantly excellent or good, but that of the x-coordinates showed insignificantly poor to moderate agreement. This study showed that the integration of maxillary digital models into CBCT scans was clinically reliable. However, considering the low inter-observer reliability on the x-coordinates of dentition, clinical experience and repeated learning are needed for accurate application of digital skeletodental model in orthognathic patients.

Objective: This case report describes the interdisciplinary treatment of a 10-year-old girl with asymmetric Class III malocclusion, severe maxillary crowding, and bilaterally impacted maxillary canines. Clinical considerations: The clinical decision-making factors regarding treatment alternatives and the final treatment plan are discussed. A two-phase nonextraction therapy was implemented to relieve severe crowding, eliminate the maxillary canine impactions, and compensate for skeletal Class III malocclusion. The first treatment phase involved aligning the left canine through conventional orthodontic traction, while the more deeply horizontally impacted right canine was corrected through transalveolar transplantation. In the second phase, the Class III dental relationship was corrected through mandibular molar retraction. The effective use of various temporary skeletal anchorage devices such as modified c-palatal plates and mini-implants was illustrated. Conclusions: At the end of the treatment, esthetic dental alignment was achieved, along with improved facial balance. The transplanted maxillary right canine showed good health and a favorable long-term prognosis over six years after the procedure.

Abstract Some craniofacial diseases or anatomical variations are found in radiographic images taken for other purposes. These incidental findings (IFs) can be detected in orthodontic patients, as various radiographs are required for orthodontic diagnosis. The radiographic data of 1020-orthodontic patients were interpreted to evaluate the rates of IFs in three-dimensional (3D) cone-beam-computed tomography (CBCT) with a large field of view (FOV) and investigate the effectiveness and accuracy of two-dimensional (2D) radiographs for detecting IFs compared to CBCT. Prevalence and accuracy in five areas was measured for sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV). The accuracies of various 2D-radiograph were compared through a proportion test. A total of 709-cases (69.5%) of 1020-subjects showed one or more IFs in CBCT images. Nasal cavity was the most affected area. Based on the CBCT images as a gold standard, different accuracies of various 2D-radiographs were observed in each area of the findings. The highest accuracy was confirmed in soft tissue calcifications with comprehensive radiographs. For detecting nasal septum deviations, postero-anterior cephalograms were the most accurate 2D radiograph. In cases the IFs were not determined because of its ambiguity in 2D radiographs, considering them as an absence of findings increased the accuracy.

Introduction: This study aimed to evaluate mandibular molar changes after distalization using Class III elastics and modified C-palatal plates (MCPPs) in the maxilla and to use CBCT to specifically analyze the third-molar position after long-term retention in adolescents. Methods: The sample consisted of 65 mandibular third molars from 35 subjects, divided into two groups. Twenty-six of the third molars were from fourteen adolescent patients with Class I bimaxillary protrusion (mean age, 12.8 years) who had undergone bilateral maxillary distalization using an MCPP and mandibular distalization with Class III elastics with non-extraction treatment. For the control group, 39 third molars from 21 Class I normal-occlusion subjects were used. In the treated group, CBCT images were taken before distalization (T1), after molar distalization (T2), and at a long-term observation point (6.1 ± 2.7 years) (T3). Repeated measures ANOVA and a post hoc test with Bonferroni correction were used to analyze significant differences in the positions at the three points in time. Results: There were 2.3 and 1.7 mm of distal movement at the crown of the mandibular first and second molars, with distal tipping of 5.2° and 5.3°, respectively, and 3.0° of distal tipping of the third molars. Comparing the treated group with the control group at T3, there was a significant change in the angulation of the third molars (p < 0.001). In the long-term, the third molars from the treated group showed a downward and buccal position after distalization. Conclusions: In the long term, the developing mandibular third molar buds had downward and buccal positional changes after total arch distalization. These findings suggest the need for clinicians to consider the possibility of the impaction of developing third molars after mandibular total arch distalization in adolescents.

Background and objectives: This study investigated the morphology of the labial and palatal bony wall of the maxillary central and lateral incisors using cone-beam computed tomography (CBCT). The difference between males and females and the measurement between right and left sides were measured. Materials and Methods: Twenty participants, consisting of 11 females and 9 males having normal occlusion, were used for the analysis. The mean age was 21.9 ± 3.0 years. The thickness of the labial bony wall and palatal bony wall, perpendicular to the long axis of the root, were evaluated at 3 and 5 mm apical from the cemento-enamel junction (CEJ) and at the root apex. The available bony wall below the apex of the central and lateral incisors, and the angulation between the long axis of the tested tooth and outer surface of the labial bone were measured. Results: The mean labial bony wall thickness at the 3 and 5 mm apical from the CEJ were 1.1 ± 0.3 mm and 1.0 ± 0.4 mm for central incisors, respectively, as well as 1.2 ± 0.4 mm and 1.0 ± 0.4 mm for lateral incisors, respectively. The mean palatal bony wall thickness at 5 mm from the CEJ was above 2 mm in the central and lateral incisors. The percentage of labial bony wall thickness 2 mm or greater at the root apex in central incisors was higher than in lateral incisors (62.5% vs. 55.0%). The percentage of palatal bony wall thickness ≥2 mm at 3 mm apical from the CEJ in the central incisors was higher than in the lateral incisors (37.5% vs. 15.0%). The results on the left and right sides did not show statistically significant differences, except in the labial and palatal bony wall thickness at 3 mm from the CEJ in the lateral incisor. Generally, no significant differences were seen between males and females, but males had a significantly higher labial bony wall thickness at 3 and 5 mm from the CEJ in the central and lateral incisors when compared with females. Conclusions: This study showed that a majority of the cases of Korean participants had less than 2 mm of labial bony wall thickness at 3 and 5 mm apical from the CEJ at central and lateral incisors, and this should be kept in mind while performing dental practices, including tooth extraction or immediate implantation in anterior regions. Preoperative analysis using CBCT may be beneficial for establishing the treatment plan.

Introduction. The purpose of this study was to investigate effects of surface treatment of mini-implants in diabetes-induced rabbits by comparing osseointegration around mini-implants. Methods. Twelve New Zealand white rabbits were divided into two groups (alloxan-induced diabetic group and control group). A total of 48 mini-implants were placed after four weeks of diabetic induction. 24 mini-implants were surface-treated with SLA (sandblasted with large grit, and acid etched) and the remaining 24 mini-implants had smooth surfaces. Four weeks after placement, 32 mini-implants were removed from 4 control and 4 diabetic rabbits. Insertion and removal torques were measured. The remaining 16 mini-implants from the two groups were histomorphometrically analyzed. Results. Maximum insertion torque showed no difference between diabetic and control groups, but total insertion energy was higher in control group. In surface-treated mini-implants, maximum removal torque was higher in both diabetic and control groups. Bone-implant contact (BIC) was increased in the control group when compared to the diabetic group. Surface-treated group had higher BIC than smooth surface group in both control and diabetic groups. However, there was no significantly statistical difference. Conclusions. Type 1 diabetes mellitus and surface treatment method of mini-implant affected primary stability of mini-implants. In addition, the use of orthodontic mini-implants in a diabetic patient is likely to show results similar to the healthy patient.

Objective. This study aimed to evaluate effects of type 1 diabetes mellitus and mini-implant placement method on the primary stability of mini-implants by comparing mechanical stability and microstructural/histological differences. Methods. After 4 weeks of diabetic induction, 48 mini-implants (24 self-tapping and 24 self-drilling implants) were placed on the tibia of 6 diabetic and 6 normal rabbits. After 4 weeks, the rabbits were sacrificed. Insertion torque, removal torque, insertion energy, and removal energy were measured with a surgical engine on 8 rabbits. Remaining 4 rabbits were analyzed by microcomputed tomography (micro-CT) and bone histomorphometry. Results. Total insertion energy was higher in self-drilling groups than self-tapping groups in both control and diabetic groups. Diabetic groups had more trabecular separation in bone marrow than the control groups in both SD and ST groups. Micro-CT analysis showed deterioration of bone quality in tibia especially in bone marrow of diabetic rabbits. However, there was no statistically significant correlation between self-drilling and self-tapping group for the remaining measurements in both control and diabetic groups. Conclusions. Type 1 diabetes mellitus and placement method of mini-implant did not affect primary stability of mini-implants.

Abstract The purpose of this study was to evaluate the effects of segmental osteotomy on the blood vessels and osteoclasts in rats using micro-computed tomography (micro-CT) and histomorphometric analysis. After segmental osteotomy was performed around the maxillary first molars of 36 male Sprague-Dawley rats (n = 72), the samples were divided into a control group (no displacement), 0.5 D group (0.5 mm buccal displacement) and 1.0 D group (1.0 mm buccal displacement) (n = 24/group). At 1, 2, 4 and 8 weeks after surgery, changes in the blood vessel volume were investigated using micro-CT with perfusion of radiopaque silicone rubber. Tartrate-resistant acid phosphatase (TRAP) staining was used for histomorphometric analysis. Two-way repeated measures analysis of variance (rmANOVA) was performed to compare the volume of blood vessels and number of TRAP-positive osteoclasts among the groups. Regarding blood vessel volume, the displacement groups had no significant effects, while the time points had significant effects (p = 0.014). The blood vessel volume at 1 week was significantly smaller than that at 2, 4, and 8 weeks (p = 0.004, p = 0.026, and p = 0.005, respectively). Regarding TRAP cell count, the displacement groups had no significant effects, while the time points had significant effects (p < 0.001). The number of TRAP-positive osteoclasts at 8 weeks was significantly smaller than that at 1, 2, and 4 weeks (p < 0.001, p < 0.001, and p = 0.002, respectively), and the count at 4 weeks was smaller than that at 1 week (p = 0.011). Therefore, a regional osteoclast-related acceleratory phenomenon was maintained until 4 weeks after surgery.