Search

Shortwave infrared (SWIR) light emitters and detectors are crucial in numerous applications. Conventionally, SWIR devices rely on epitaxially grown narrow bandgap semiconductors, such as InGaAs, which are expensive to fabricate and difficult to integrate with silicon complementary metal-oxide-semiconductors (CMOS). Colloidal quantum dots (CQDs) have emerged as low-cost alternatives to epitaxially grown semiconductors, offering integration with CMOS through solution-processing methods. However, the predominant SWIR-active CQD systems rely on heavy-metal-containing compositions (PbS and HgTe), hindering the adoption of CQD SWIR technology. InAs CQDs are promising substitutes in SWIR applications. However, synthesizing SWIR-active InAs CQDs is challenging, often constraining them to the visible or near-infrared regions. To achieve SWIR bandgaps, large InAs CQDs are typically required; such CQDs are prone to having surface traps that quench photogenerated charge carriers, adversely affecting device performance. Here, we report a two-step synthesis of surface-passivated SWIR-active InAs/ZnSe core/shell colloidal nanorod quantum dots (CNQDs). These surface-passivated CNQDs are highly emissive and tunable over the entire technologically important region (1200-1800 nm) of the SWIR window with photoluminescence quantum yields as high as 60%. Using these SWIR-active InAs/ZnSe CNQDs, we demonstrated an SWIR-active InAs CQD photodetector, achieving a record high external quantum efficiency of ∼15% at ∼1450 nm and a low dark current of ∼10 -2 mA/cm 2 .

Terbium-doped gadolinium oxysulfide (Gd 2 O 2 S:Tb 3+ ), commonly referred to as Gadox, is a widely used scintillator material due to its exceptional X-ray attenuation efficiency and high light yield. However, Gadox-based scintillators suffer from low X-ray spatial resolution due to their large particle size, which causes significant light scattering. To address this limitation, we report the synthesis of terbium-doped colloidal Gadox nanoplatelets (NPLs) with near-unity photoluminescence quantum yield (PLQY) and high radioluminescence light yield (LY). In particular, our investigation reveals a strong correlation between PLQY, LY, particle size, and Tb 3+ concentration. Our synthetic approach allows precise control over the lateral size and thickness of the Gadox NPLs, resulting in a LY of 50,000 photons/MeV. Flexible scintillating screens fabricated with the solution-processable Gadox NPLs exhibited a 20 lp/mm X-ray spatial resolution, surpassing commercial Gadox scintillators. These high-performance and flexible Gadox NPL-based scintillators enable enhanced X-ray imaging capabilities in medicine and security. Our work provides a framework for designing nanomaterial scintillators with superior spatial resolution and efficiency through precise control of dimensions and dopant concentration.

Colloidal quantum dots (CQDs) are emerging materials for short-wave infrared (SWIR, ≈1100-3000 nm) photodetectors, which are technologically important for a broad array of applications. Unfortunately, the most developed SWIR CQD systems are Pb and Hg chalcogenides; their toxicity and regulated compositions limit their applications. InSb CQD system is a potential environmentally friendly alternative, whose bandgap in theory, is tunable via quantum confinement across the SWIR spectrum. However, InSb CQDs are difficult to exploit, due to their complex syntheses and uncommon reactive precursors, which greatly hinder their application and study. Here, a one-pot synthesis strategy is reported using commercially available precursors to synthesize-under standard colloidal synthesis conditions-high-quality, size-tunable InSb CQDs. With this strategy, the large Bohr exciton radius of InSb can be exploited for tuning the bandgap of the CQDs over a wide range of wavelengths (≈1250-1860 nm) across the SWIR region. Furthermore, by changing the surface ligands of the CQDs from oleic acid (OA) to 1-dodecanthiol (DDT), a ≈20-fold lengthening in the excited-state lifetime, efficient carrier multiplication, and slower carrier annihilation are observed. The work opens a wide range of SWIR applications to a promising class of Pb- and Hg-free CQDs., (© 2023 Wiley‐VCH GmbH.)

InAs colloidal quantum dots (CQDs) have emerged as candidate lead- and mercury-free solution-processed semiconductors for infrared technology due to their appropriate bulk bandgap, which can be tuned by quantum confinement, and promising charge-carrier transport properties. However, the lack of suitable arsenic precursors and readily accessible synthesis conditions have limited InAs CQDs to smaller sizes (<7 nm), with bandgaps largely restricted to <1400 nm in the near-infrared spectral window. Conventional InAs CQD synthesis requires highly reactive, hazardous arsenic precursors, which are commercially scarce, making the synthesis hard to control and study. Here, we present a controlled synthesis strategy (using only readily available and less reactive precursors) to overcome the practical wavelength limitation of InAs CQDs, achieving monodisperse InAs nanorod CQDs with bandgaps tunable from ∼1200 to ∼1800 nm, thus crossing deep into the short-wave infrared (SWIR) region. By controlling the reactivity through in situ precursor complexation, we isolate the reaction mechanism, producing InAs nanorod CQDs that display narrow excitonic features and efficient carrier multiplication. Our work enables InAs CQDs for a wider range of SWIR applications.

Point defects in nanoparticles have long been hypothesized to play an important role in governing the particle's electronic structure and physicochemical properties. However, single point defects in material systems usually exist with other heterogeneities, obscuring the chemical role of the effects. Herein, we report the synthesis of novel atomically precise, copper hydride nanoclusters (NCs), [Cu 28 H 10 (C 7 H 7 S) 18 (TPP) 3 ] (Cu 28 ; TPP: triphenylphosphine; C 7 H 7 S: o-thiocresol) with a defined defect in the gram scale via a one-pot reduction method. The Cu 28 acts as a highly selective catalyst for C-C cross-couplings. The work highlights the potential of defective NCs as model systems for investigating individual defects, correlating defects with physiochemical properties, and rationally designing new nanoparticle catalysts., (© 2023 Wiley-VCH GmbH.)

Bright-red light-emitting diodes (LEDs) with a narrow emission line width that emit between 620 and 635 nm are needed to meet the latest industry color standard for wide color gamut displays, Rec. 2020. CsPbI 3 perovskite quantum dots (QDs) are one of the few known materials that are ideally suited to meet these criteria. Unfortunately, CsPbI 3 perovskite QDs are prone to transform into a non-red-emitting phase and are subject to further degradation mechanisms when their luminescence wavelength is tuned to match that of the Rec. 2020 standard. Here, we show that zwitterionic lecithin ligands can stabilize the perovskite phase of CsPbI 3 QDs for long periods in air for at least 6 months compared to a few days for control samples. LEDs fabricated with our ultrastable lecithin-capped CsPbI 3 QDs exhibit an external quantum efficiency (EQE) of 7.1% for electroluminescence centered at 634 nm─a record for all-inorganic perovskite nanocrystals in Rec. 2020 red. Our devices achieve a maximum luminance of 1391 cd/m 2 at 7.5 V, and their operational half-life is 33 min ( T 50 ) at 200 cd/m 2 ─a 10-fold enhancement compared to control samples. Density functional theory results suggest that the surface strain in CsPbI 3 QDs capped with the conventional ligands, oleic acid and oleylamine, contributes to the instability of the perovskite structural phase. On the other hand, lecithin binding induces virtually no surface strain and shows a stronger binding tendency for the CsPbI 3 surface. Our study highlights the tremendous potential of zwitterionic ligands in stabilizing the perovskite phase and particle size of CsPbI 3 QDs for various optoelectronic applications.

A series of new type hybrid bromobismuthates formed by various pyrazinium cations were isolated and studied. In the systems initially containing iodide anions and monocations of substituted pyrazines, the complexes based on doubly charged cations of substituted pyrazines instead of ones based on the corresponding monocations were surprisingly formed. The variation of substituted pyrazinium cations affects not only the crystal structures of hybrid bromobismuthates via tuning the nuclearity of the anions but also the hydrolytic stability of the compounds. A thorough structural study of hydrolytic transformations was performed for halobismuthates for the first time. The results revealed a stepwise course of the process affording several products. Spectral studies of the complexes evidence that the values of optical band gaps (E g ) are low in comparison with those for similar systems which is most likely due to the cooperative effect involving the nature of the corresponding cations together with the features of the supramolecular structures of the complexes.