Search

In recent years, based on the high catalytic activities of metal nanoclusters (MNCs) and the unique porous structure of metal-organic frameworks (MOFs), much work has focused on MOF-confined small MNCs for catalysis applications. However, the commonly used "ship-in-boat" approach is unfeasible for precisely controlling the size and composition of the formed MNCs and meanwhile often causes structural distortion/degradation. On the other hand, the "bottle-around-ship" method usually has the disadvantages that MOFs show uncontrollable self-nucleation outside the MNCs and the stabilizers on the surface of MNCs may greatly reduce their catalytic activities. In this work, monodispersed Pt16(C4O4SH5)26 clusters (Pt16(MSA)26) were first prepared and used as a precursor for the synthesis of Pt(MSA)@ZIF-67 via the typical Co-carboxylate type of linkage at the interface under ambient atmosphere. After encapsulating the Pt clusters in ZIF-67, the protecting ligands were removed under 300 °C to get surface-clean Pt16 clusters confined in ZIF-67 (Pt@ZIF-67). The obtained Pt@ZIF-67 exhibited high catalytic activity for the hydrolysis of ammonia borane that was superior to that of most of the reported noble-metal catalysts. Meanwhile, by annealing the Pt(MSA)@ZIF-67 at 800 °C to form highly conductive graphitic carbon-coated Pt NCs and Co nanoparticles (NPs) (Pt/Co@NC), the obtained composite showed high catalytic activity for the oxygen reduction reaction (ORR). The formed Pt/Co@NC showed 9.6 times higher ORR mass activity (at 0.8 V) than Pt/C. This work provides a strategy to fabricate highly dispersed and stable metal clusters confined in the porous matrix for catalysis and shows that highly porous MOFs have promising catalysis applications by combining them with other active components.

Human bodily kinesthetic sensing is generally complicated and ever-changing due to the diversity of body deformation as well as the complexity of mechanical stimulus, which is different from the unidirectional mechanical motion. So, there exists a huge challenge for current flexible sensors to accurately differentiate and identify what kind of external mechanical stimulus is exerted via analyzing digital signals. Here, we report a flexible dual-interdigital-electrode sensor (FDES) that consists of two interdigital electrodes and a highly pressure-sensitive porous conductive sponge. The FDES can precisely identify multiple mechanical stimuli, e.g., pressing, positive bending, negative bending, X-direction stretching, and Y-direction stretching, and convert them into corresponding current variation signals. Moreover, the FDES exhibits other exceptional properties, such as high sensitivity, stretchability, large measurement range, and outstanding stability, accompanied by simple structural design and low-cost processing simultaneously. Additionally, our FDES successfully identifies various complex activities of the human body, which lays a foundation for the further development of multimode flexible sensors.

The controllable synthesis of 1-dimensional (1D) multi-metal Pt-based alloys, with enhanced electro-chemical properties remains a challenge, despite the wide application of Pt-based catalysts in fuel cells and in the hydrogen evolution reaction (HER). Herein, we fabricate PtCuFe alloy nanochains (NCs) that have a tunable composition by flexibly adjusting the molar ratios of the metal precursors. It was found that Cu

The miniaturization of electronic devices and power systems for capacitive energy storage under harsh environments requires scalable high-quality ultrathin high-temperature dielectric films. To meet the need, ultrasonic spray-coating (USC) can be used. Novel polyimides with a dipolar group, CF

Snap bean, Phaseolus vulgaris L., as a warm-season vegetable, low temperature stress seriously affect the yield and quality. At present, little is known about the genes and molecular regulation mechanism in cold response in snap bean exposed to low temperature. Our objectives were to identify the low temperature response genes in snap bean and to examine differences in the gene response between cold-tolerant and cold-sensitive genotypes. We used two highly inbred snap bean lines in this study, the cold-tolerant line ‘120’, and the cold-sensitive line ‘093’. The plants were grown to the three leaf and one heart stage and exposed to 4 °C low temperature. We used RNA sequencing (RNA-seq) to analyze the differences of gene expression. 988 and 874 cold-responsive genes were identified in ‘T120 vs CK120’ and ‘T093 vs CK093’ (‘T’ stands for low temperature treatment, and ‘CK’ stands for control at room temperature), respectively. Of these, 555 and 442 genes were unique to cold-stressed lines ‘120’ and ‘093’, respectively compared to the control. Our analysis of these differentially expressed genes indicates that Ca2+, ROS, and hormones act as signaling molecules that play important roles in low temperature response in P. vulgaris. Altering the expression of genes in these signaling pathways activates expression of downstream response genes which can interact with other signaling regulatory networks. This may maintained the balance of ROS and hormones, making line ‘120’ more cold-tolerant than line ‘093’. Our results provide a preliminarily understanding of the molecular basis of low temperature response in snap bean, and also establish a foundation for the future genetic improvement of cold sensitivity in snap bean by incorporating genes for cold tolerance.

Flowering time influences pod yield and quality of common bean (Phaseolus vulgaris); however, our knowledge of flowering time genes and flowering mechanisms in common bean remain limited. We performed RNA-sequencing (RNA-seq) analyses [long-day (LD) condition and short-day (SD) condition] to identify the flowering time genes and analyzed differentially expressed genes to examine their expression levels in relation to flowering time in ‘Hong Jin Gou’ common bean, a cultivar highly sensitive to photoperiod. The circadian patterns of related genes were identified using quantitative real-time polymerase chain reaction (qRT-PCR). Flowering time in ‘Hong Jin Gou’ was influenced by day length: SD conditions promoted flowering. A total of eight flowering time–related genes were identified, which were classified into photoperiod pathways. Homologs of pseudo-response regulator 5, pseudo-response regulator 7, and gigantea were more highly expressed under SD conditions than under LD conditions. Homologs of late elongated hypocotyl and timing of cab expression 1 were differentially expressed under light and dark conditions. Early flowering 3 is a key regulator of the pathway, which coordinates light and circadian clock inputs in leaves to trigger the expression of downstream genes. The present study provides critical information that could facilitate further investigations on the genetic mechanism of flowering time in common bean.

The high-performance, miniaturization and flexibility of two-dimensional (2D) material-based electronics and optoelectronics make them promising substitutes for silicon-based devices in the future. However, the complex structures and the assistance strategies needed to compensate for the intrinsic deficiencies of 2D materials are major challenges hindering practical applications. It is hoped to achieve high-performance 2D material-based devices of the simplest construction without external assistance. Therefore, making full use of the basic components (host material, substrate and electrode) of 2D devices is crucial. To date, the role of the substrate has always been ignored. Here, we choose undoped-silicon carbon (SiC) and Kapton (polyimide, PI) film as substrates for MoS2 photodetectors (PDs) for rigid and flexible applications, respectively. A new concept, the “dual-photogating effect” induced at the MoS2/substrate interface, is proposed and applied to obtain ultra-high photoresponse performance, such as high photoresponsivity of ∼104 A W−1 in MoS2/SiC PD and an on/off ratio of ∼105 in a MoS2/Kapton PD.

Flexible pressure sensors have emerged as an indispensable part of wearable devices due to their application in physiological activity monitoring. To realize long-term on-body service, they are increasingly required for properties of conformability, air permeability, and durability. However, the enhancement of sensitivity remains a challenge for ultrathin capacitive sensors, particularly in the low-pressure region. Here, we introduced a highly sensitive and ultrathin capacitive pressure sensor based on a breathable all-fabric network with a micropatterned nanofiber dielectric layer, an all-fabric capacitive sensor (AFCS). This all-fabric network endows a series of exceptional performances, such as high sensitivity (8.31 kPa-1 under 1 kPa), ultralow detection limit (0.5 Pa), wide detection range (0.5 Pa to 80 kPa), and excellent robustness (10 000 dynamic cycles). Besides, the all-fabric structure provides other properties for the AFCS, e.g., high skin conformability, super thinness (dozens of micrometers), and exceptional air permeability. Our AFCS shows promising potential in breathing track, muscle activity detection, fingertip pressure monitoring, and spatial pressure distribution, paving way for comfortable skinlike epidermal electronics.

Flexible strain sensors are critical to several potential intelligent applications, such as human-machine interfaces, soft robotics, human motion detection, and safety monitoring of components. Stretchable functional materials are important components of strain sensors, and they are still major challenges for high performance strain sensors. Herein, we demonstrate a novel strategy of designing and optimizing flexible strain sensor by developing topological structure modulated high permittivity elastic nanocomposite. The topological structure with three-phase percolative nano-nanonetworks produces synergistic effects of space charge enhancement and local electric field modulation, and it gives rise to an ultrahigh dielectric permittivity (113.4, at 1 kHz, over 1500% enhancement than that of commercial elastic polyurethane matrix) and excellent comprehensive electromechanical performance, and the optimal comprehensive electromechanical performance reaches to 542.91 MPa-1, which is over 9-fold than that of commercial polyurethane elastic film. An interdigital capacitive strain sensor is designed using the topological structured elastic dielectric nanocomposite. It possesses high initial capacitance density and positive capacitance response with stain, achieving high signal-to-noise ratio, high capacitance response sensitivity, and wide linear range, and it breaks through disadvantages of negative sensitivity and narrow linear range for conventional interdigital strain sensors. The prepared integrated strain sensor arrays are able to measure local strain of convoluted surfaces and monitor the motion of soft actuators in real time, and they would make conditions for intelligent control systems and the study of morphological intelligence.

A fully rollable nanocomposite-based nanogenerator (NCG) is developed by integrating a lead-free piezoelectric hybrid layer with a type of nanofiber-supported silver nanowire (AgNW) network as electrodes. The thin-film nanocomposite is composed of electroactive polyvinylidene fluoride (PVDF) polymer matrix and compositionally modified potassium sodium niobate-based nanoparticles (NPs) with a high piezoelectric coefficient (d33) of 53 pm/V, which is revealed by the piezoresponse force microscopy measurements. Under periodical agitation at a compressive force of 50 N and 1 Hz, the NCG can steadily render high electric output up to an open-circuit voltage of 18 V and a short-circuit current of 2.6 μA. Of particular importance is the decent rollability of the NCG, as indicated by the negligible decay in the electric output after it being repeatedly rolled around a gel pen for 200 cycles. Besides, the biocompatible NCG can potentially be used to scavenge biomechanical energy from low-frequency human motions, a...

To evaluate the role of methylenetetrahydrofolate reductase (MTHFR) gene polymorphisms and plasma homocysteine levels in Chinese patients with type 2 diabetes mellitus and diabetic retinopathy (DR).MTHFR genetic C677T polymorphisms were determined by PCR-restriction fragment length polymorphism. Total plasma homocysteine levels were measured using high-performance liquid chromatography (HPLC) with fluorescence detection.The frequencies of MTHFR T homogenetic type and CT heterogenetic type and allele T (28.18%, 41.82%, 49.09%) in type 2 diabetic patients with diabetic retinopathy were significantly higher than those in diabetic patients without retinopathy (18.37%,29.59%,33.16%) or the normal controls (17.54%, 28.07%, 31.58%). Howerver, there were no significant differences in the frequency of MTHFR genotype and allele between the type 2 diabetic patients without retinopathy and the normal controls. The presence of T allele appeared to have a strong association with the development of diabetic retinopathy. The odds ratio was 1.94 and the 95% confidence interval was 1.31-2.88. Moreover, the plasma homocysteine levels in patients with TT or CT genotype were markedly higher than those in patients with CC genotype.MTHFR gene C677T mutation associated with a predisposition to increase of plasma homocysteine may represent a genetic risk factor for diabetic retinopathy in Chinese type 2 diabetes mellitus.