Search

Ahmed Adel Ali Youssef,1,2 Narendar Dudhipala,2 Soumyajit Majumdar2,3 1Department of Pharmaceutical Technology, Faculty of Pharmacy, Kafrelsheikh University, Kafrelsheikh, 33516, Egypt; 2Department of Pharmaceutics and Drug Delivery, School of Pharmacy, University of Mississippi, Oxford, MS, 38677, USA; 3Research Institute of Pharmaceutical Sciences, University of Mississippi, Oxford, MS, 38677, USACorrespondence: Soumyajit Majumdar, Department of Pharmaceutics and Drug Delivery,School of Pharmacy, University of Mississippi, 113J TCRC West, Oxford, MS, 38677, USA, Tel +1 662 915-3793, Email majumso@olemiss.eduIntroduction: Untreated ocular infections can damage the unique fine structures of the eye with possible visual impairments and blindness. Ciprofloxacin (CIP) ophthalmic solution is prescribed as first-line therapy in ocular bacterial infections. Natamycin (NT) ophthalmic suspension is one of the progenitors in ocular antifungal therapy. Nanostructured lipid carriers (NLCs) have been widely examined for ocular penetration enhancement and distribution to deeper ocular tissues. The objective of the current study was to prepare NLCs loaded with a combination of CIP and NT (CIP-NT-NLCs) and embed them in an in-situ gelling system (CIP-NT-NLCs-IG). This novel formulation will target the co-delivery of CIP and NT for the treatment of mixed ocular infections or as empirical treatment in case of limited access to healthcare diagnostic services.Methods: CIP-NT-NLC and CIP-NT-NLC-IG formulations were evaluated based on physicochemical characteristics, in vitro release, and ex vivo transcorneal permeation studies and compared against commercial CIP and NT ophthalmic eye drops.Results and Discussion: NLCs formulation (0.1% CIP and 0.3% NT) showed particle size, polydispersity index, and zeta potential of 196.2 ± 1.2 nm, 0.43 ± 0.06, and − 28.1 ± 1.4 mV, respectively. Moreover, CIP-NT-NLCs showed entrapment efficiency of 80.9 ± 2.9 and 98.7 ± 1.9% for CIP and NT, respectively. CIP-NT-NLCs-IGformulation with 0.2% w/v gellan gum demonstrated the most favorable viscoelastic characteristics for ocular application. CIP-NT-NLCs and CIP-NT-NLCs-IG formulations exhibited a sustained release pattern for both drugs over 24 h. Moreover, CIP-NT-NLCs and CIP-NT-NLC-IG formulations showed 4.0- and 2.2-folds, and 5.0- and 2.5-folds enhancement in ex vivo transcorneal permeability of CIP and NT, respectively, compared to the control formulations.Conclusion: The results suggest that this dual nanoparticulate-based in-situ gelling drug delivery system can serve as a promising topical delivery platform for the treatment of ocular infections.Graphical Abstract: Keywords: keratitis, ciprofloxacin, natamycin, dual, nanostructured lipid carriers, sustained, in-situ gel, stability, transcorneal flux, permeability

Background: It is unknown whether the existence of severe bystander damage will affect left ventricular (LV) healing following primary percutaneous coronary intervention (PPCI). The aim of the present analysis was to follow LV recovery using 2D speckle tracking echocardiography (2-D STE) in cases with single versus multiple vessel disease with acute myocardial infarction (AMI) who underwent PPCI and to assess major adverse cardiovascular events (MACEs) within 3 months., Patients and Methods: This work was conducted at Assiut University Heart Hospital. Of 1026 screened subjects with AMI needing PPCI and assessed for eligibility, only 89 cases fulfilled the inclusion criteria. They were classified into Group A: single vessel and Group B: multiple vessel (≥ 2 vessels) disease. Their data were obtained on admittance and after 90 days., Results: In group A compared to group B, there was a statistically preferable value at baseline in the global longitudinal strain- Apical 2 chamber (GLS-A2C) (-12.05 ± 3.57 vs. -10.38 ± 3.92, P = 0.039). At follow-up, the improvement was in all 2-D STE variables, including GLS-long axis (GLS-LAX) (-13.09 ± 3.84 vs.-10.75 ± 3.96, P = 0.006), GLS- apical 4 chamber (GLS-A4C) (-13.23 ± 3.51 vs.-10.62 ± 4.08, P = 0.002), GLS-A2C (-13.85 ± 3.41 vs-10.93 ± 3.97, P < 0.001) and GLS- average (GLS-AVG, P = 0.001). There was a considerable negative correlation between the recovery of LV performance and the existence of multi-vessel lesions (P = 0.009). There was no variance between the groups regarding MACEs., Conclusions: Patients with single vessel lesions who underwent PPCI to the culprit lesion had better recovery of LV function than those with multi-vessel (≥ 2 vessels) lesions who underwent PPCI to the culprit lesion only. The presence of multivessel involvement was an independent risk factor for deterioration in GLS., Trial Registration: Registered in clinical trial, clinicalTrial.gov ID NCT04103008 (25/09/2019). IRB registration: 17,100,834 (05/11/2019)., (© 2024. The Author(s).)

Quetiapine fumarate (QTF) was approved for the treatment of schizophrenia and acute manic episodes. QTF can also be used as an adjunctive treatment for major depressive disorders. QTF oral bioavailability is limited due to its poor aqueous solubility and pre-systemic metabolism. The objective of the current investigation was the formulation development and manufacturing of solid self-nanoemulsifying drug delivery system (S-SNEDDS) formulation through a single-step continuous hot-melt extrusion (HME) process to address these drawbacks. In this study, Capmul ® MCM, Gelucire ® 48/16, and propylene glycol were selected as oil, surfactant, and co-surfactant, respectively, for the preparation of S-SNEDDS. Soluplus ® and Klucel™ EF (1:1) were selected as the solid carrier. Response surface methodology in the form of central composite design (CCD) was utilized in the current experimental design to develop the S-SNEDDS formulations via a continuous HME technology. The developed formulations were evaluated for self-emulsifying properties, particle size distribution, thermal behavior, crystallinity, morphology, physicochemical incompatibility, accelerated stability, and in vitro drug release studies. The globule size and emulsification time of the optimized SNEDDS formulation was 92.27 ± 3.4 nm and 3.4 ± 3.38 min. The differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) studies revealed the amorphous nature of the drug within the formulation. There were no drug-excipient incompatibilities observed following the Fourier transform infrared (FTIR) spectroscopy. The optimized formulation showed an extended-release profile for 24 h. The optimized formulation was stable for three months (last time-point tested) at 40 °C/75% RH. Therefore, the developed S-SNEDDS formulation could be an effective oral delivery platform for QTF and could lead to better therapeutic outcomes.

Purpose: Natamycin (NT) is used as a first-line antifungal prescription in the treatment of fungal keratitis (FK) and is commercially available as a 5% w/v ophthalmic suspension. NT shows poor water solubility and light sensitivity. Thus, the present investigation is aimed to enhance the fraction of NT in solution in the commercial formulation by adding cyclodextrins (CDs), thereby improving the delivery of the drug into deeper ocular tissues. Methods: The solubility of NT in different CDs, the impact of ultraviolet (UV) light exposure, stability at 4°C and 25°C, in vitro release, and ex vivo transcorneal permeation studies were performed. Results: NT exhibited the highest solubility (66-fold) in randomly methylated-β-cyclodextrin (RM-βCD) with hydroxypropyl-βCD (HP-βCD) showing the next highest solubility (54-fold) increase in comparison to market formulation Natacyn ® as control. The stability of NT-CD solutions was monitored for 2 months (last-time point) at both storage conditions. The degradation profile of NT in NT-RM-βCD and NT-HP-βCD solutions under UV-light exposure followed first-order kinetics exhibiting half-lives of 1.2 h and 1.4 h, respectively, an almost 3-fold increase over the control solutions. In vitro release/diffusion studies revealed that suspensions containing RM-βCD and HP-βCD increased transmembrane flux significantly (3.1-fold) compared to the control group. The transcorneal permeability of NT from NT-RM-βCD suspension exhibited an 8.5-fold ( P  < 0.05) improvement compared to Natacyn eyedrops. Furthermore, the addition of RM-βCD to NT suspension increases the solubilized fraction of NT and enhances transcorneal permeability. Conclusion: Therefore, NT-RM-βCD formulations could potentially lead to a decreased frequency of administration and significantly improved therapeutic outcomes in FK treatment.

Conventional cyclodextrin complexation enhances the solubility of poorly soluble drugs but is solvent-intensive and environmentally unfavorable. This study evaluated solvent-free hot-melt extrusion (HME) for forming cyclodextrin inclusion complexes to improve the solubility and dissolution of ibuprofen (IBU). Molecular docking confirmed IBU's hosting in Hydroxypropyl-β-cyclodextrin (HPβ-CD), while phase solubility revealed its complex stoichiometry and stability. In addition, an 11 mm twin-screw co-rotating extruder with PVP VA-64 as an auxiliary substance aided the complex formation and extrusion. Using QbD and the Box-Behnken design, we studied variables (barrel temperature, screw speed, and polymer concentration) and their impact on solubility and dissolution. The high polymer concentration and high screw speeds positively affected the dependent variables. However, higher temperatures had a negative effect. The lowest barrel temperature set near the Tg of the polymer, when combined with high polymer concentrations, resulted in high torques in HME and halted the extrusion process. Therefore, the temperature and polymer concentration should be selected to provide sufficient melt viscosities to aid the complex formation and extrusion process. Studies such as DSC and XRD revealed the amorphous conversion of IBU, while the inclusion complex formation was demonstrated by ATR and NMR studies. The dissolution of ternary inclusion complexes (TIC) produced from HME was found to be ≥85% released within 30 min. This finding implied the high solubility of IBU, according to the US FDA 2018 guidance for highly soluble compounds containing immediate-release solid oral dosage forms. Overall, the studies revealed the effect of various process parameters on the formation of CD inclusion complexes via HME.

Bacterial conjunctivitis (BC) entails inflammation of the ocular mucous membrane. Early effective treatment of BC can prevent the spread of the infection to the intraocular tissues, which could lead to bacterial endophthalmitis or serious visual disability. In 2003, gatifloxacin (GTX) eyedrops were introduced as a new broad-spectrum fluoroquinolone to treat BC. Subsequently, GTX use was extended to other ocular bacterial infections. However, due to precorneal loss and poor ocular bioavailability, frequent administration of the commercial eyedrops is necessary, leading to poor patient compliance. Thus, the goal of the current investigation was to formulate GTX in a lipid-based drug delivery system to overcome the challenges with the existing marketed eyedrops and, thus, improve the management of bacterial conjunctivitis. GTX-NLCs and SLNs were formulated with a hot homogenization-probe sonication method. The lead GTX-NLC formulation was characterized and assessed for in vitro drug release, antimicrobial efficacy (against methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa ), and ex vivo permeation. The lead formulation exhibited desired physicochemical characteristics, an extended release of GTX over a 12 h period, and was stable over three months at the three storage conditions (refrigerated, room temperature, and accelerated). The transcorneal flux and permeability of GTX from the GTX-NLC formulation were 5.5- and 6.0-fold higher in comparison to the commercial eyedrops and exhibited a similar in vitro antibacterial activity. Therefore, GTX-NLCs could serve as an alternative drug delivery platform to improve treatment outcomes in BC.

Despite numerous research efforts, drug delivery through the oral route remains a major challenge to formulation scientists. The oral delivery of drugs poses a significant challenge because more than 40% of new chemical entities are practically insoluble in water. Low aqueous solubility is the main problem encountered during the formulation development of new actives and for generic development. A complexation approach has been widely investigated to address this issue, which subsequently improves the bioavailability of these drugs. This review discusses the various types of complexes such as metal complex (drug-metal ion), organic molecules (drug-caffeine or drug-hydrophilic polymer), inclusion complex (drug-cyclodextrin), and pharmacosomes (drug-phospholipids) that improves the aqueous solubility, dissolution, and permeability of the drug along with the numerous case studies reported in the literature. Besides improving solubility, drug-complexation provides versatile functions like improving stability, reducing the toxicity of drugs, increasing or decreasing the dissolution rate, and enhancing bioavailability and biodistribution. Apart, various methods to predict the stoichiometric ratio of reactants and the stability of the developed complex are discussed., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Aqueous solubility is one of the key parameters for achieving the desired drug concentration in systemic circulation for better therapeutic outcomes. Carbamazepine (CBZ) is practically insoluble in water, is a BCS class II drug, and exhibits dissolution-dependent oral bioavailability. This study explored a novel application of hot-melt extrusion in the manufacture and development of a thermodynamically stable solid crystal suspension (SCS) to improve the solubility and dissolution rate of CBZ. The SCSs were prepared using sugar alcohols, such as mannitol or xylitol, as crystalline carriers. The drug-sugar blend was processed by hot melt extrusion up to 40 % (w/w) drug loading. The extruded SCS was evaluated for drug content, saturation solubility, differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), in vitro release, and stability studies. The physicochemical characterization revealed the highly crystalline existence of pure drug, pure carriers, and extruded SCS. FTIR analysis did not reveal any physical or chemical incompatibilities between the drug and sugar alcohols and showed a homogeneous CBZ distribution within respective crystalline carriers. The SEM micrographs of the solidified SCS revealed the presence of approximately 100 μm crystalline agglomerates. In vitro dissolution and solubility studies showed that the CBZ dissolution rate and solubility were improved significantly from both crystalline carriers for all tested drug loads. The SCSs showed no significant changes in drug content, in vitro release profiles, and thermal characteristics over 3 months of storage at accelerated stability conditions (40±2°C/75±5% RH). As a result, it can be inferred that the SCS strategy can be employed as a contemporary alternative technique to improve the dissolution rate of BCS class II drugs via HME technology., Competing Interests: Declaration of Interest The authors declare no conflict of interest.

Coupling hot-melt extrusion (HME) with fused deposition modeling three-dimensional printing (FDM-3DP) can facilitate the fabrication of tailored, patient-centered, and complex-shaped ocular dosage forms. We fabricated ciprofloxacin HCl ocular inserts by coupling high-throughput, solvent-free, and continuous HME with FDM-3DP. Insert fabrication utilized biocompatible, biodegradable, bioadhesive Klucel™ hydroxypropyl cellulose polymer, subjected to distinct FDM-3DP processing parameters, utilizing a design of experiment approach to achieve a tailored release profile. We determined the drug content, thermal properties, drug-excipient compatibility, surface morphology, in vitro release, antibacterial activity, ex-vivo transcorneal permeation, and stability of inserts. An inverse relationship was noted between insert thickness, infill density, and drug release rate. The optimized design demonstrated an amorphous solid dispersion with an extended-release profile over 24 h, no physical or chemical incompatibility, excellent mucoadhesive strength, smooth surface, lack of bacterial growth (Pseudomonas aeruginosa) in all release samples, and prolonged transcorneal drug flux compared with commercial eye drops and immediate-release inserts. The designed inserts were stable at room temperature considering drug content, thermal behavior, and release profile over three months. Overall, the fabricated insert could reduce administration frequency to once-daily dosing, affording a promising topical delivery platform with prolonged antibacterial activity and superior therapeutic outcomes for managing ocular bacterial infections., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Background: Irbesartan (IR) is used in the treatment of hypertension, heart failure, and nephropathy in Type II diabetes. IR bioavailability is limited by poor solubility and presystemic metabolism. In our previous investigations, cyclodextrin (HPβCD) complexed solid lipid nanoparticles (SLNs) of IR were prepared, optimized, and characterized. The current study aimed to confirm the reproducibility of the previous methodology and to evaluate the pharmacokinetic (PK) and pharmacodynamic (PD) performance of the selected lead formulations in an experimental animal model. Methods: SLNs were prepared by hot homogenization followed by probe sonication with IR/HPβCD inclusion complex loaded into a solid lipid (Dynasan 112). SLNs were evaluated for physical characteristics, drug content, entrapment efficiency, in vitro release profile, and surface morphology. The pharmacokinetic and pharmacodynamic behavior of the SLNs were evaluated in Wistar rats. Results: Photon correlation spectroscopy, drug content, entrapment efficiency, and dissolution studies results were reproducible and consistent with our earlier investigation. PK studies showed 2.1-, 6.6-, and 9.9-fold improvement in the relative oral bioavailability of the drug from IR-HPβCD, IR-SLN, and IR-HPβCD-SLN formulations, respectively compared to IR suspension. However, IR-HPβCD-SLNs showed 1.5- and 4.7-fold improvement in the relative oral bioavailability of the drug compared to IR-SLN and IR-HPβCD formulations, respectively. PD studies in hypertensive Wistar rats showed a good control over systolic blood pressure for 48 h for SLN formulations compared to 2 h for IR suspension. However, the IR-HPβCD inclusion complex exhibited immediate antihypertensive activity (0.5 h) with a period of systolic blood pressure control similar to IR suspension. Conclusions: The current approach exhibited improved oral bioavailability along with improved and prolonged pharmacodynamic effect., Competing Interests: Competing Interests: The authors have declared that no competing interest exists., (© The author(s).)

Recent advances in drug delivery technologies utilizing a variety of carriers have resulted in a paradigm shift in the current approach to diagnosis and therapy. Mesoporous silica nanoparticles (MSNs) were developed in response to the need for materials with high thermal, chemical, and mechanical properties. The synthesis, ease of surface functionalization, tunable pore size, large surface area, and biocompatibility of MSNs make them useful in a variety of biomedical applications such as drug delivery, theranostics, and stem cell research. In addition, MSNs have a high capability of delivering actives ranging from small molecules such as drugs and amino acids to larger peptides, vaccines, and antibodies in general. Moreover, MSN-based transdermal delivery has sparked a lot of interest because of the increase in drug stability, permeation, and ease of functionalization. The functionalization of MSNs plays an important role in the efficient delivery of therapeutic agents in a highly controlled manner. This review introduced dermal and transdermal drug delivery systems, explained the anatomy of the skin, and summarized different barriers that affect the transdermal delivery of many therapeutic agents. In addition, the fundamentals of MSNs together with their physicochemical properties, synthesis approaches, raw materials used in their fabrication, and factors affecting their physicochemical properties will be covered. Moreover, the applications of MSNs in dermal and transdermal delivery, the biocompatibility of MSNs in terms of toxicity and safety, and biodistribution will be explained with the help of a detailed literature review. The review is covering the current and future perspectives of MSNs in the pharmaceutical field with therapeutic applications., Competing Interests: Competing Interests: The authors have declared that no competing interest exists., (© The author(s).)

This work developed high drug-load pellets for colon targeting in minimal steps by coupling hot-melt extrusion (HME) with a die-surface cutting pelletizer, offering a potential continuous pellet manufacturing process. Ketoprofen (KTP) was selected as a model drug for this study due to its thermal stability and severe upper gastrointestinal side effects. Low and high methoxyl grade pectins were the enzyme-triggered release matrix, and hydroxypropyl methylcellulose (HME 4 M/HME 100LV) was used as a premature release-retarding agent. The powder X-ray diffraction technique and the differential scanning calorimetry results revealed that KTP exists in the solid-solution state within the polymeric matrix after the HME step. The scanning electron micrographs of the fabricated pellets showed a smooth surface without any cracks. The lead formulation showed the lowest premature drug release (∼13%) with an extended KTP release profile over a 24 h period in the presence and absence of the release-triggering enzyme. The lead formulation was stable for 3 months at accelerated stability conditions (40 °C/75 ± 5% RH) concerning drug content, in vitro release, and thermal characteristics. In summary, coupling HME and pelletization processes could be a promising technology for developing colon-targeted drug delivery systems., Competing Interests: The authors believe that there are no conflicts of interest to declare for the research article entitled “Preparation and In vitro Evaluation of Hot-Melt Extruded Pectin-Based Pellets Containing Ketoprofen for Colon Targeting”., (© 2022 The Authors.)

Cannabidiol (CBD) is the major non-psychoactive and most widely studied of the cannabinoid constituents and has great therapeutic potential in a variety of diseases. However, contradictory reports in the literature with respect to CBD's effect on intraocular pressure (IOP) have raised concerns and halted research exploring its use in ocular therapeutics. Therefore, the current investigation aimed to further evaluate CBD's impact on the IOP in the rabbit model. CBD nanoemulsions, containing Carbopol ® 940 NF as a mucoadhesive agent (CBD-NEC), were prepared using hot-homogenization followed by probe sonication. The stability of the formulations post-moist-heat sterilization, in terms of physical and chemical characteristics, was studied for three different storage conditions. The effect of the formulation on the intraocular pressure (IOP) profile in normotensive Dutch Belted male rabbits was then examined. The lead CBD-NEC formulation (1% w / v CBD) exhibited a globule size of 259 ± 2.0 nm, 0.27 ± 0.01 PDI, and 23.2 ± 0.4 cP viscosity, and was physically and chemically stable for one month (last time point tested) at 4 °C, 25 °C, and 40 °C. CBD-NEC significantly lowered the IOP in the treated eyes for up to 360 min, with a peak drop in IOP of 4.5 mmHg observed at the 150 min time point, post-topical application. The IOP of the contralateral eye (untreated) was also observed to be lowered significantly, but the effect lasted up to the 180 min time point only. Overall, topically administered CBD, formulated in a mucoadhesive nanoemulsion formulation, reduced the IOP in the animal model studied. The results support further exploration of CBD as a therapeutic option for various inflammation-based ocular diseases.

Background: Myocarditis is a highly heterogeneous disorder with a challenging diagnostic work-up. We aimed to focus on the possible diagnostic workup for this condition in settings where endomyocardial biopsy as a gold standard is not always feasible, detect the etiologic cardiotropic viruses in our locality, and follow the clinical course in patients admitted with clinically suspected myocarditis., Methods: This is a prospective observational study. We recruited patients with clinically suspected myocarditis presenting at a university hospital from October 1st, 2020 until March 31st, 2021. All Patients had a diagnostic coronary angiography and were included only if they had a non-obstructive coronary artery disease. All patients also had cardiac magnetic resonance imaging (CMR) with contrast. Sera were obtained from all suspected patients for detection of antibodies against viruses using enzyme-linked immunosorbent assay, and viral genomes using polymerase chain reaction (PCR), and reverse transcription-PCR. Endomyocardial biopsy was done for patients with a typical CMR picture of myocarditis., Results: Out of 2163 patients presenting to the hospital within the 6 months, only 51 met the inclusion criteria. Males represented 73%, with a mean age of 39 ± 16 years. CMR showed an ischemic pattern in 4 patients and thus they were excluded. We classified patients into two categories based on CMR results: group A (CMR-positive myocarditis), 12 patients (25.5%), and group B (CMR-negative myocarditis), 35 (74.5%) patients. On serological analysis, 66% of patients (n = 31/47) showed antibodies against the common cardiotropic viruses. Parvovirus B19 IgM in 22 patients (47%) and coxsackievirus IgM in 16 (34%) were the most observed etiologies. Regarding the outcome, 42.5% of patients recovered left ventricular ejection fraction and three patients died at 6 months' clinical follow-up., Conclusion: Patients with Clinically suspected myocarditis represented 2.2% of total hospital admissions in 6 months. CMR is only a good positive test for the diagnosis of acute myocarditis. Parvovirus B19 and coxsackievirus were the most common pathogens in our locality., Trial Registration: Clinical trial registration no., NCT04312490; first registration: 18/03/2020. First recruited case 01/10/2020. URL: https://register., Clinicaltrials: gov/prs/app/action/SelectProtocol?sid=S0009O3D&selectaction=Edit&uid=U0002DVP&ts=2&cx=9zdfin ., (© 2022. The Author(s).)

Amorphous solid dispersions (ASDs) have gained attention as a formulation strategy in recent years, with the potential to improve the apparent solubility and, hence, the oral bioavailability of poorly soluble drugs. The process of formulating ASDs is commonly faced with challenges owing to the intrinsic physical and chemical instability of the initial amorphous form and the long-term physical stability of drug formulations. Numerous research publications on hot-melt extrusion (HME) technology have demonstrated that it is the most efficient approach for manufacturing reasonably stable ASDs. The HME technique has been established as a faster scale-up production strategy for formulation evaluation and has the potential to minimize the time to market. Thermodynamic evaluation and theoretical predictions of drug-polymer solubility and miscibility may assist to reduce the product development cost by HME. This review article highlights robust and established prediction theories and experimental approaches for the selection of polymeric carriers for the development of hot melt extrusion based stable amorphous solid dispersions (ASDs). In addition, this review makes a significant contribution to the literature as a pilot guide for ASD assessment, as well as to confirm the drug-polymer compatibility and physical stability of HME-based formulations., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Wound healing is highly specialized dynamic multiple phase process for the repair of damaged/injured tissues through an intricate mechanism. Any failure in the normal wound healing process results in abnormal scar formation, and chronic state which is more susceptible to infections. Chronic wounds affect patients' quality of life along with increased morbidity and mortality and are huge financial burden to healthcare systems worldwide, and thus requires specialized biomedical intensive treatment for its management. The clinical assessment and management of chronic wounds remains challenging despite the development of various therapeutic regimens owing to its painstakingly long-term treatment requirement and complex wound healing mechanism. Various conventional approaches such as cell therapy, gene therapy, growth factor delivery, wound dressings, and skin grafts etc., are being utilized for promoting wound healing in different types of wounds. However, all these abovementioned therapies are not satisfactory for all wound types, therefore, there is an urgent demand for the development of competitive therapies. Therefore, there is a pertinent requirement to develop newer and innovative treatment modalities for multipart therapeutic regimens for chronic wounds. Recent developments in advanced wound care technology includes nanotherapeutics, stem cells therapy, bioengineered skin grafts, and 3D bioprinting-based strategies for improving therapeutic outcomes with a focus on skin regeneration with minimal side effects. The main objective of this review is to provide an updated overview of progress in therapeutic options in chronic wounds healing and management over the years using next generation innovative approaches. Herein, we have discussed the skin function and anatomy, wounds and wound healing processes, followed by conventional treatment modalities for wound healing and skin regeneration. Furthermore, various emerging and innovative strategies for promoting quality wound healing such as nanotherapeutics, stem cells therapy, 3D bioprinted skin, extracellular matrix-based approaches, platelet-rich plasma-based approaches, and cold plasma treatment therapy have been discussed with their benefits and shortcomings. Finally, challenges of these innovative strategies are reviewed with a note on future prospects.

Ocular bacterial infections can lead to serious visual disability without proper treatment. Moxifloxacin (MOX) has been approved by the US Food and Drug Administration as a monotherapy for ocular bacterial infections and is available commercially as an ophthalmic solution (0.5% w / v ). However, precorneal retention, drainage, and low bioavailability remain the foremost challenges associated with current commercial eyedrops. With this study, we aimed to design a MOX-loaded nanoemulsion (NE; MOX-NE) with mucoadhesive agents (MOX-NEM) to sustain MOX release, as well as to overcome the potential drawbacks of the current commercial ophthalmic formulation. MOX-NE and MOX-NEM formulations were prepared by hot homogenization coupled with probe sonication technique and subsequently characterized. The lead formulations were further evaluated for in vitro release, ex vivo transcorneal permeation, sterilization, and antimicrobial efficacy studies. Commercial MOX ophthalmic solution was used as a control. The lead formulations showed the desired physicochemical properties and viscosity. All lead formulations showed sustained release profiles a period of more than 12 h. Filtered and autoclaved lead formulations were stable for one month (the last time point tested) under refrigeration and at room temperature. Ex vivo transcorneal permeation studies revealed a 2.1-fold improvement in MOX permeation of the lead MOX-NE formulation compared with Vigamox ® eyedrops. However, MOX-NEM formulations showed similar flux and permeability coefficients to those of Vigamox ® eyedrops. The lead formulations showed similar in vitro antibacterial activity as the commercial eyedrops and crude drug solution. Therefore, MOX-NE and MOX-NEM formulations could serve as effective delivery vehicles for MOX and could improve treatment outcomes in different ocular bacterial infections.

Objective: Hypertensive pulmonary edema is a fatal condition unless early and properly diagnosed and managed. Central blood pressure (cBP) has been proven to be more associated with adverse cardiovascular events. We aimed to study the correlation between cBP and heart damage in patients with Hypertensive pulmonary edema., Methods: We included 50 patients admitted to the emergency department in a university hospital for hypertensive pulmonary edema, 27 women and 23 men aged 50 to 70 years. We excluded patients with suspected acute coronary syndrome, significant valvular heart disease, and pericardial diseases. We measured cBP non-invasively from pulse wave analysis of the brachial artery. Brain natriuretic peptide (BNP) and cBP were repeatedly measured for every patient., Results: The median BNP levels of patients significantly decreased from 284 pg/ml (232-352.5) to 31.5 pg/ml (24-54) on discharge, P < 0.001. We found a significant correlation between admission BNP and central SBP (cSBP), urea, creatinine, arterial blood gases parameters, and left ventricular end-diastolic diameter (LVEDD). Concurrently, BNP at discharge was correlated with age, central DBP (cDBP), urea, creatinine, LVEDD, partial oxygen pressure (pO2), and oxygen saturation (SO2). Delta BNP was correlated with cSBP, peripheral SBP, urea, creatinine, pO2, and SO2. Linear regression analysis revealed that creatinine, and cSBP, were independent predictors of admission BNP, while urea and cDBP were the independent predictors of discharge BNP., Conclusion: This simple, noninvasive method of cBP measurement was significantly associated with the extent of myocardial damage in patients presenting with hypertensive pulmonary edema., (Copyright © 2021 Wolters Kluwer Health, Inc. All rights reserved.)

Irbesartan (IR) is an angiotensin II receptor antagonist drug with antihypertensive activity. IR bioavailability is limited due to poor solubility and first-pass metabolism. The current investigation aimed to design, develop, and characterize the cyclodextrin(s) (CD) complexed IR (IR-CD) loaded solid lipid nanoparticles (IR-CD-SLNs) for enhanced solubility, sustained release behavior, and subsequently improved bioavailability through oral administration. Based on phase solubility studies, solid complexes were prepared by the coacervation followed by lyophilization method and characterized for drug content, inclusion efficiency, solubility, and in vitro dissolution. IR-CD inclusion complexes demonstrated enhancement of solubility and dissolution rate of IR. However, the dissolution efficiency was significantly increased with hydroxypropyl-βCD (HP-βCD) inclusion complex than beta-CD (βCD). SLNs were obtained by hot homogenization coupled with the ultrasonication method with IR/HP-βCD inclusion complex loaded into Dynasan 112 and glycerol monostearate (GMS). SLNs were evaluated for physicochemical characteristics, in vitro release, differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), and physical stability at room temperature for two months. The optimized SLNs formulation showed particle size, polydispersity index, zeta potential, assay, and entrapment efficiency of 257.6 ± 5.1 nm, 0.21 ± 0.03, -30.5 ± 4.1 mV, 99.8 ± 2.5, and 93.7 ± 2.5%, respectively. IR-CD-SLN and IR-SLN dispersions showed sustained release of IR compared to the IR-CD inclusion complexes. DSC results complimented PXRD results by the absence of IR endothermic peak. Optimized IR-CD complex, IR-SLN, and IR-CD-SLN formulations were stable for two months at room temperature. Thus, the current IR oral formulation may exhibit improved oral bioavailability and prolonged antihypertensive activity, which may improve therapeutic outcomes in the treatment of hypertension and heart failure.

Bacterial keratitis (BK) is a critical ocular infection that can lead to serious visual disability. Ciprofloxacin (CIP), moxifloxacin (MOX), and levofloxacin (LFX) have been accepted as monotherapies by the US Food and Drug Administration for BK treatment. CIP is available commercially at 0.3% w / v concentration as an ophthalmic solution and as an ointment for ocular delivery. Because of solubility issues at physiological pH, CIP precipitation can occur at the corneal surface post instillation of the solution dosage form. Consequently, the ocular bioavailability of CIP is reduced. The ointment dosage form is associated with side effects such as blurred vision, itching, redness, eye discomfort, and eye dryness. This study aimed to design a CIP loaded nanoemulsion (NE; CIP-NE) to facilitate drug penetration into the corneal layers for improved therapeutic outcomes as well as to overcome the drawbacks of the current commercial ophthalmic formulations. CIP-NE formulations were prepared by hot homogenization and ultrasonication, using oleic acid (CIP-O-NE) and Labrafac ® Lipophile WL 1349 (CIP-L-NE) as the oily phase, and Tween ® 80 and Poloxamer 188 as surfactants. Optimized CIP-NE was further evaluated with respect to in vitro release, ex vivo transcorneal permeation, and moist heat sterilization process, using commercial CIP ophthalmic solution as a control. Optimized CIP-O-NE formulation showed a globule size, polydispersity index, and zeta potential of 121.6 ± 1.5 nm, 0.13 ± 0.01, and -35.1 ± 2.1 mV, respectively, with 100.1 ± 2.0% drug content and was spherical in shape. In vitro release and ex vivo transcorneal permeation studies exhibited sustained release and a 2.1-fold permeation enhancement, respectively, compared with commercial CIP ophthalmic solution. Autoclaved CIP-O-NE formulation was found to be stable for one month (last time-point tested) at refrigerated and room temperature. Therefore, CIP-NE formulation could serve as an effective delivery system for CIP and could improve treatment outcomes in BK.

The mitral valve surgery decision is made mainly according to echocardiographic (ECHO) criteria. As the asymptomatic patients are still candidates for surgery in some situations, this makes the accurate assessment of mitral regurgitation (MR) severity and cardiac dimensions even more important. We aimed to compare ECHO and cardiac magnetic resonance imaging (CMR) in the assessment of MR severity and cardiac dimensions. In this prospective study, we included all patients with more than mild MR by ECHO and referred to our university hospital from 1st of April 2017 and 1st of April 2019. Exclusion criteria were critically ill patients, presence of other valve lesions, planned revascularization, pregnancy and contraindication for CMR. All patients had full history taking, examination, body surface area, and ECG. MR severity and left atrial and left ventricular dimensions were assessed in 50 patients with both 2D-ECHO and CMR in the same day. There were no significant differences in baseline clinical characteristics between moderate (24 patients) and severe MR (26 patients) groups. Poor degree of agreement was present between CMR and ECHO assessment for MR severity (same degree of MR only in 36% (18/50 patients) with kappa grade = 0.19). Furthermore, ECHO overestimated grades of MR compared to CMR (severe MR in 52% vs. 38.4%, p = 0.01 respectively). Based on the etiology of MR, primary (30 patients) vs. secondary MR (20 patients) showed the same dis-agreement between CMR and ECHO assessment of MR severity. Left atrial and ventricular dimensions showed good agreement between CMR and ECHO. Our results suggest that CMR could be more accurate than ECHO in assessing the severity of MR especially in severe cases that need surgery.

Background: Coronary tortuosity (CT) had different definitions and scores in literature with unclear pathophysiological impact., Objectives: To study degree of CT and it's relation to ischemic changes in patients with angina but normal coronary angiography (CA)., Methods: We conducted a prospective study at University hospitals between May 2016 and January 2017. We included 200 consecutive patients who underwent CA due to chest pain assumed to be of cardiac origin, and their CA was normal (no diameter stenosis >30%, nor myocardial bridging). Patients were prospectively divided into 2 groups based on the presence (n = 113) or absence (n = 87) of ischemic changes during stress study and compared for clinical, echocardiographic and CA characteristics. A newly proposed Tortuosity Severity Index (TSI) was developed into significant (mild/moderate CT with more than 4 curvatures in total, or severe/extreme CT with any number of curvatures) or not significant TSI (mild CT with curvatures less than or equal to 4 curvatures in total)., Results: Patients with ischemic changes had the highest rate of CT (76.5 vs 18%, p = 0.004) compared to those without. CT mostly affects the left anterior descending (LAD) coronary artery in mid and distal segments. Females, elderly, and hypertensives with left ventricular hypertrophy were strongly related to CT. Multivariate logistic regression analysis identified CT with significant TSI as the only predictor of ischemic changes in these patients (OR = 6.2, CI = 2.5-15.3, P = <0.001)., Conclusions: Coronary tortuosity is a strong predictor of anginal pain among patients with normal CA, despite positive stress study. This finding is more pronounced among elderly, hypertensive female patients.