Search

This study makes the 3D reconstruction of complex-shaped particles based on the multi-view of 2D images. The complex-shaped calcareous sand particles are taken as samples, and typical complex-shaped particles such as block, strip, and dendrite are reconstructed. The final reconstruction accuracy is characterized by convexity, circularity, aspect ratio, and other shape indicators. In the reconstruction process, the initial projection plane of the particles is rotated around the axis to obtain a series of 2D projection images of the particles, and the boundary coordinates are extracted. Then, the 3D point cloud is used to match the coordinates of the obtained 2D image contours, and the point sets located outside the 2D image contours is deleted so that all points are located within the obtained series of 2D image contours. The point cloud is further materialized and constructed to obtain the 3D solid on this basis. By reconstructing 150 particles of different shapes, it is found that the reconstruction error of more than 90% of the particles is within 10%, among which, the largest error range is dendritic particles with the maximum error of 10.84%, and the minimum error is less than 1%. The method is simple and can effectively construct 3D models of complex-shaped particles with high accuracy.

Abstract The gradient nanostructure is machined on the aluminum (Al) alloy by the two-dimensional ultrasonic surface burnishing process (2D-USBP). The mechanism of why the gradient nanostructure enhances wear resistance is investigated. The mechanical properties and microstructure characterization for the gradient nanostructure are performed by operating a nanoindenter, transmission electron microscopy (TEM), and electron backscattered diffraction (EBSD). Dry wear tests are performed on the samples before and after machining to evaluate the wear resistance and mechanisms. The effect of the gradient nanostructure on the wear resistance is explored by developing the crystal plasticity (CP) finite element and molecular dynamics (MD) models. The characterization results show that the 2D-USBP sample prepared a gradient structure of ∼600 µm thick on the aluminum surface, increasing the surface hardness from 1.13 to 1.71 GPa and reducing the elastic modulus from 78.84 to 70.14 GPa. The optimization of the surface microstructure and the increase of the mechanical properties effectively enhance the wear resistance of the sample, with 41.20%, 39.07%, and 54.58% of the wear scar areas for the 2D-USBP treated samples to the original samples under 5, 10, and 15 N loads, respectively. The gradient nanostructure hinders the slip of dislocations inside the sample during the wear process and reduces the size and scope of plastic deformation; meanwhile, the resistance to deformation, adhesion, and crack initiation and propagation of the sample surface is improved, resulting in enhanced wear resistance.

This study evaluated the effects of the dietary starch amylose/amylopectin ratio on growth performance, rumen fermentation and blood parameters, carcass characteristics and marbling score, and meat fatty acid profiles and transcriptional changes in the genes involved in the gluconeogenesis pathway in Chinese Qinchuan cattle. Forty-five cattle were randomly divided into three groups. The bulls were fed a control diet (middle amylose/amylopectin ratio=0.47) or diets with either waxy corn starch (WS) inclusion (low amylose/amylopectin ratio=0.23) or pea starch (PS) inclusion (high amylose/amylopectin ratio=0.60) for 90 days. The bulls were individually allowed to receive the diets at the daily amount of at least 2.1% of their individual BW twice daily. The bulls were weighed at 45-day intervals, and blood and rumen fluid samples were also collected at 45-day intervals. The bulls were slaughtered and longissimus thoracis (LT) samples were collected for meat quality measurements. Compared with PS, the average daily gain (ADG) and feed efficiency in control and WS were increased (P0.05) among the three groups. Compared with PS, the serum insulin concentration in WS was increased (P0.05). Chemical and physio-chemical compositions of LT did not differ (P>0.05) among the three groups. In conclusion, diets with low or middle amylose/amylopectin ratios increased the backfat thickness, and tended to improve ADG, but had no effect on other carcass characteristics, fat content in the LT, or the expression of hepatic genes related to the gluconeogenesis pathway in Chinese Qinchuan cattle.

Objectives Our research group has previously demonstrated that hearing loss might be a risk factor for synaptic loss within the hippocampus and impairment of cognition using an animal model of Alzheimer disease. In this study, after inducing hearing loss in a rat model of Alzheimer disease, the associations of various microRNAs (miRNAs) with cognitive impairment were investigated. Methods Rats were divided randomly into two experimental groups: the control group, which underwent sham surgery and subthreshold amyloid-β infusion and the deaf group, which underwent bilateral cochlear ablation and subthreshold amyloid-β infusion. All rats completed several cognitive function assessments 11 weeks after surgery, including the object-in-place task (OPT), the novel object recognition task (NOR), the object location task (OLT), and the Y-maze test. After the rats completed these tests, hippocampus tissue samples were assessed using miRNA microarrays. Candidate miRNAs were selected based on the results and then validated with quantitative reverse transcription-polymerase chain reaction (qRT-PCR) analyses. Results The deaf group showed considerably lower scores on the OPT, OLT, and Y-maze test than the control group. The microarray analysis revealed that miR-29b-3p, -30e-5p, -153-3p, -376a-3p, -598-3p, -652-5p, and -873-3p were candidate miRNAs, and qRT-PCR showed significantly higher levels of miR-376a-3p and miR-598-3p in the deaf group. Conclusion These results indicate that miR-376a-3p and miR-598-3p were related to cognitive impairment after hearing loss.

AIM: To investigate whether the gene variants in MYOC and ABCA1 are associated with primary angle-closure glaucoma (PACG) and anterior chamber depth (ACD) and axial length (AL) in samples from northern China. METHODS: The present case-control association study consisted of 500 PACG patients and 720 unrelated controls. Each participant was genotyped for eleven single nucleotide polymorphisms (SNPs) in MYOC and ABCA1 genes (rs12076134, rs183532, rs235875 and rs235913 in MYOC, rs2422493, rs2487042, rs2472496, rs2472493, rs2487032, rs2472459 and rs2472519 near ABCA1) using an improved multiplex ligation detection reaction (iMLDR) technique. The genetic association analyses were performed by PLINK using a logistic regression model. The association between genotypes and ocular biometric parameters was performed by SPSS using generalized estimation equation. Bonferroni corrections were implemented and the statistical power was calculated by the Power and Sample Size Calculation. RESULTS: Two SNPs rs183532 and rs235875 as well as a haplotype TTC in MYOC were nominally associated with PACG despite the significance was lost after Bonferroni correction. No association was observed between ABCA1 and PACG, neither did the association between these variants and ACD as well as AL. CONCLUSION: The present study suggests MYOC and ABCA1 do not play a part in the pathogenesis of PACG as well as the regulation of ocular biometric parameters in a northern Chinese population. Further investigations with large sample size are needed to verify this consequence.

Objective This study was performed to evaluate whether hot temperature and rumen-protected fat (RPF) supplementation affect growth performance, rumen characteristics, and serum metabolites in growing stage of Korean cattle steers. Methods Twenty Korean cattle steers (230.4±4.09 kg of body weight [BW], 10.7±0.09 months of age) were divided into a conventional control diet group (n = 10) and a 0.8% RPF supplementation group (n = 10). Steers were fed 1.5% BW of a concentrate diet and 4 kg of tall fescue hay for 16 weeks (July 10 to August 6 [P1], August 7 to September 3 [P2], September 4 to October 1 [P3], October 2 to 30 [P4], of 2015). Results The mean temperature-humidity index (THI) was higher (p0.05) average daily gain and gain to feed ratio. Month and RPF supplementation affected concentrations of glucose, albumin, and high-density lipoprotein (HDL); those of albumin and glucose tended to decrease (p0.05) ruminal pH, NH3-N, and volatile fatty acid concentrations, whereas the C2:C3 ratio was affected (p

High myopia (HM) is one of the leading causes of visual impairment worldwide. In order to expand the myopia gene spectrum in the Chinese population, we investigated genetic mutations in a cohort of 27 families with HM from Northwest China by using whole-exome sequencing (WES). Genetic variations were filtered using bioinformatics tools and cosegregation analysis. A total of 201 candidate mutations were detected, and 139 were cosegregated with the disease in the families. Multistep analysis revealed four missense variants in four unrelated families, including c.904C>T (p.R302C) in CSMD1, c.860G>A (p.R287H) in PARP8, c.G848A (p.G283D) in ADAMTSL1, and c.686A>G (p.H229R) in FNDC3B. These mutations were rare or absent in the Exome Aggregation Consortium (ExAC), 1000 Genomes Project, and Genome Aggregation Database (gnomAD), indicating that they are new candidate disease-causing genes. Our findings not only expand the myopia gene spectrum but also provide reference information for further genetic study of heritable HM.

Objective This study was performed to compare fat content, reducing sugar contents, sensory traits, and fatty acid (FA) and volatile compound profiles in longissimus thoracis (LT) among Korean cattle (KC), Holstein (HO), and Angus (AN) steers. Methods Twelve LT samples (about 500 g each) of KC with an average age of 31±0.42 months, an average carcass weight of 431±12.5 kg, and a quality grade (QG) of 1+ were obtained from the joint livestock products market. Twelve LT samples of HO cattle with an average age of 24±0.54 months, an average carcass weight of 402±7.81 kg, and a QG of 2 were also obtained from the same market. Twelve LT samples of AN steers with an average age of about 20 months and a QG of choice were purchased from a beef delivery company. After slaughter, samples were kept at 4°C for 42 days and prepared for immediate analysis or stored at appropriate conditions. The chemical composition, color, pH, shear force, collagen content, reducing sugars, sensory evaluation, FA composition, and volatile compound content for each LT sample were analyzed. Results The LT of KC had the highest (p

Intramuscular fat (IMF) content in skeletal muscle including the longissimus dorsi muscle (LM), also known as marbling fat, is one of the most important factors determining beef quality in several countries including Korea, Japan, Australia, and the United States. Genetics and breed, management, and nutrition affect IMF deposition. Japanese Black cattle breed has the highest IMF content in the world, and Korean cattle (also called Hanwoo) the second highest. Here, we review results of research on genetic factors (breed and sex differences and heritability) that affect IMF deposition. Cattle management factors are also important for IMF deposition. Castration of bulls increases IMF deposition in most cattle breeds. The effects of several management factors, including weaning age, castration, slaughter weight and age, and environmental conditions on IMF deposition are also reviewed. Nutritional factors, including fat metabolism, digestion and absorption of feed, glucose/starch availability, and vitamin A, D, and C levels are important for IMF deposition. Manipulating IMF deposition through developmental programming via metabolic imprinting is a recently proposed nutritional method to change potential IMF deposition during the fetal and neonatal periods in rodents and domestic animals. Application of fetal nutritional programming to increase IMF deposition of progeny in later life is reviewed. The coordination of several factors affects IMF deposition. Thus, a combination of several strategies may be needed to manipulate IMF deposition, depending on the consumer’s beef preference. In particular, stage-specific feeding programs with concentrate-based diets developed by Japan and Korea are described in this article.

Objective This study was performed to evaluate whether ambient temperature and dietary glycerol addition affect growth performance, and blood metabolic and immunological parameters, in beef cattle. Methods Twenty Korean cattle steers (405.1±7.11 kg of body weight [BW], 14.2±0.15 months of age) were divided into a conventional control diet group (n = 10) and a 2% glycerol- added group (n = 10). Steers were fed 1.6% BW of a concentrate diet and 0.75% BW of a timothy hay diet for 8 weeks (4 weeks from July 28th to August 26th and 4 weeks from August 27th to September 26th). Blood was collected four times on July 28th, August 11th, August 27th, and September 26th. Results The maximum indoor ambient temperature-humidity index in August (75.8) was higher (p

The digital manufacture of complete dentures would greatly simplify the workflow; however, the metal-reinforced complete dentures production method has not been well established. This article describes a technique of fabricating metal-reinforced complete dentures in a milling machine using the geometry guide, a negative impression of the occlusal surface of the metal-reinforced complete denture designed using the computer-aided design software. The geometry guide supports and stabilizes the artificial teeth and metal framework in the correct position in the surrounding resin. Fabrication of metal-reinforced dental prosthesis using the digital technique is possible with this method.

Background: Colorectal serrated polyp is considered as histologically heterogeneous lesions with malignant potential in western countries. However, few Asian studies have investigated the comprehensive clinical features of serrated polyps in symptomatic populations. The aim of the study was to evaluate the features of colorectal serrated polyps in a Chinese symptomatic population. Methods: Data from all consecutive symptomatic patients were documented from a large colonoscopy database and were analyzed. Chi-square test or Fisher′s exact test and logistic regression analysis were used for the data processing. Results: A total of 9191 (31.7%) patients were detected with at least one colorectal polyp. The prevalence of serrated polyps was 0.53% (153/28,981). The proportions of hyperplastic polyp (HP), sessile serrated adenoma/polyp (SSA/P), and traditional serrated adenoma (TSA) of all serrated polyps were 41.2%, 7.2%, and 51.6%, respectively, which showed a lower proportion of HP and SSA/P and a higher proportion of TSA. Serrated polyps appeared more in males and elder patients while there was no significant difference in the subtype distribution in gender and age. The proportions of large and proximal serrated polyps were 13.7% (21/153) and 46.4% (71/153), respectively. In total, 98.9% (89/90) serrated adenomas were found with dysplasia. Moreover, 14 patients with serrated polyps were found with synchronous advanced colorectal neoplasia, and large serrated polyps (LSPs) (odds ratio: 3.446, 95% confidence interval: 1.010-11.750, P < 0.05), especially large HPs, might have an association with synchronous advanced neoplasia (AN). Conclusions: The overall detection rate of colorectal serrated polyps in Chinese symptomatic patient population was low, and distribution pattern of three subtypes is different from previous reports. Moreover, LSPs, especially large HPs, might be associated with an increased risk of synchronous AN.

This study was performed to compare carcass traits, sensory characteristics, physiochemical composition, and contents of nucleotides, collagen, and free amino acids among quality grades (QG) and to understand the association between QG and above parameters in loin and rump of Korean cattle steer. Loin and rump samples were obtained from 48 Korean cattle steers with each of four QG (QG 1++, 1+, 1, and 2; average 32 months of age). Carcass weight and marbling score (MS) were highest in QG 1++, whereas texture score measured by a meat grader was highest in QG 2. A correlation analysis revealed that MS (r = 0.98; p