Search

In this paper, with the observing corrosion morphology of the inner cavity of the Christmas tree hydraulic valve and detecting the physical and chemical properties of the material (chemical composition, mechanical properties and metallographic structure),It is found that the main reason for the corrosion of the inner cavity of Yidong fan is that in the production process, due to improper heat treatment process, Cr element is accumulated in the metallographic structure of the hydraulic valve matrix, forming a grid like high Cr region, and the grid becomes a low Cr region, under the action of formation water containing CO2, the low Cr area is corroded, and large and deep corrosion pits are formed in the internal cavity of the hydraulic valve.

Conversely to canonical splicing, back-splicing connects the upstream 3' splice site (SS) with a downstream 5'SS and generates exonic circular RNAs (circRNAs) that are widely identified and have regulatory functions in eukaryotic gene expression. However, sex-specific back-splicing in Drosophila has not been investigated and its regulation remains unclear. Here, we performed multiple RNA analyses of a variety sex-specific Drosophila samples and identified over ten thousand circular RNAs, in which hundreds are sex-differentially and -specifically back-spliced. Intriguingly, we found that expression of SXL, an RNA-binding protein encoded by Sex-lethal (Sxl), the master Drosophila sex-determination gene that is only spliced into functional proteins in females, promoted back-splicing of many female-differential circRNAs in the male S2 cells, whereas expression of a SXL mutant (SXLRRM) did not promote those events. Using a monoclonal antibody, we further obtained the transcriptome-wide RNA-binding sites of SXL through PAR-CLIP. After splicing assay of mini-genes with mutations in the SXL-binding sites, we revealed that SXL-binding on flanking exons and introns of pre-mRNAs facilitates back-splicing, whereas SXL-binding on the circRNA exons inhibits back-splicing. This study provides strong evidence that SXL has a regulatory role in back-splicing to generate sex-specific and -differential circRNAs, as well as in the initiation of sex-determination cascade through canonical forward-splicing.

BACKGROUND Spinal cord injury (SCI) refers to the interruption of the tracts inside the spinal cord caused by various factors. The repair of damaged axons has always been a difficult point in clinical treatment and neuroscience research. The treatment of SCI with Buyang huanwu decoction (BYHWD), a well-known recipe for invigorating Qi (a vital force forming part of any living entity in traditional Chinese culture) and promoting blood circulation, shows a good effect. METHODS The rubrospinal tract (RST) transection model in rats was established in this study and rats were administrated with low (BL), medium (BM), or high (BH) doses of BYHWD. RESULTS Compared with the SCI group, BL, BM moderately, and BH significantly improved the motor function of forelimbs and increased the number of red nucleus neurons in SCI rats. As for the possible molecular mechanism, BL, BM moderately, and BH significantly increased mTOR whereas decreased Beclin-1 and LC3 in the red nucleus. CONCLUSION In conclusion, low, medium, and high doses of BYHWD could promote neural recovery in SCI rats through improving motor function and neuron survival in the red nucleus. The neuroprotective effects of BYHWD might be associated with affecting the mTOR signaling pathway and autophagy.

Catalyzed by spliceosomes in the nucleus, RNA splicing removes intronic sequences from precursor RNAs in eukaryotes to generate mature RNA, which also significantly increases proteome complexity and fine-tunes gene expression. Most metazoans have two coexisting spliceosomes; the major spliceosome, which removes99.5% of introns, and the minor spliceosome, which removes far fewer introns (only 770 at present have been predicted in the human genome). Both spliceosomes are large and dynamic machineries, each consisting of five small nuclear RNAs (snRNAs) and more than 100 proteins. However, the dynamic assembly, catalysis, and protein composition of the minor spliceosome are still poorly understood. With different splicing signals, minor introns are rare and usually distributed alone and flanked by major introns in genes, raising questions of how they are recognized by the minor spliceosome and how their processing deals with the splicing of neighboring major introns. Due to large numbers of introns and close similarities between the two machinery, cooperative, and competitive recognition by the two spliceosomes has been investigated. Functionally, many minor-intron-containing genes are evolutionarily conserved and essential. Mutations in the minor spliceosome exhibit a variety of developmental defects in plants and animals and are linked to numerous human diseases. Here, we review recent progress in the understanding of minor splicing, compare currently known components of the two spliceosomes, survey minor introns in a wide range of organisms, discuss cooperation and competition of the two spliceosomes in splicing of minor-intron-containing genes, and contributions of minor splicing mutations in development and diseases. This article is categorized under: RNA ProcessingProcessing of Small RNAs RNA ProcessingSplicing Mechanisms RNA Structure and DynamicsRNA Structure, Dynamics and Chemistry.

In this paper, based on the life cycle concept of oil sludge waste from the NdFeB manufacturing process, we investigate the process technology route to recover valuable elements from the oil sludge waste by hydro-metallurgical refining and calcium reduction to fabricate a sintered NdFeB magnet. The life cycle list was calculated and the environmental impact of the main processes was examined using the ReCiPe method, and the main factors of environmental impact were identified. The results showed that the hydrometallurgical technology route, compared with the calcium reduction technology route, resulted in 119.84% of human health hazards, 119.84% of ecological damage and 119.84% of resource. The consumption was found to be 13.08% higher than that of FDP. The sensitivity analysis revealed that the production of hydrochloric acid is highly sensitive to FDP, and power consumption is high to WTP in the hydrometallurgical technology route, and WTP in the calcium reduction unit process, and HTP in all processes in the calcium reduction technology route. The overall results show that reducing the environmental impact in the calcium reduction recovery process and accelerating the clean production of China's power resources are of great significance for the recovery of oil sludge waste for the preparation of recycled sintered NdFeB.

Transcription and pre-mRNA splicing are coupled to promote gene expression and regulation. However, mechanisms by which transcription and splicing influence each other are still under investigation. The ATPase Prp5p is required for pre-spliceosome assembly and splicing proofreading at the branch-point region. From an open UV mutagenesis screen for genetic suppressors of prp5 defects and subsequent targeted testing, we identify components of the TBP-binding module of the Spt–Ada–Gcn5 Acetyltransferase (SAGA) complex, Spt8p and Spt3p. Spt8Δ and spt3Δ rescue the cold-sensitivity of prp5-GAR allele, and prp5 mutants restore growth of spt8Δ and spt3Δ strains on 6-azauracil. By chromatin immunoprecipitation (ChIP), we find that prp5 alleles decrease recruitment of RNA polymerase II (Pol II) to an intron-containing gene, which is rescued by spt8Δ. Further ChIP-seq reveals that global effects on Pol II-binding are mutually rescued by prp5-GAR and spt8Δ. Inhibited splicing caused by prp5-GAR is also restored by spt8Δ. In vitro assays indicate that Prp5p directly interacts with Spt8p, but not Spt3p. We demonstrate that Prp5p's splicing proofreading is modulated by Spt8p and Spt3p. Therefore, this study reveals that interactions between the TBP-binding module of SAGA and the spliceosomal ATPase Prp5p mediate a balance between transcription initiation/elongation and pre-spliceosome assembly.

SF3B1 mutations occur in many cancers, and the highly conserved His662 residue is one of the hotspot mutation sites. To address effects on splicing and development, we constructed strains carrying point mutations at the corresponding residue His698 in Drosophila using the CRISPR-Cas9 technique. Two mutations, H698D and H698R, were selected due to their frequent presence in patients and notable opposite charges. Both the sf3b1-H698D and–H698R mutant flies exhibit developmental defects, including less egg-laying, decreased hatching rates, delayed morphogenesis and shorter lifespans. Interestingly, the H698D mutant has decreased resistance to fungal infection, while the H698R mutant shows impaired climbing ability. Consistent with these phenotypes, further analysis of RNA-seq data finds altered expression of immune response genes and changed alternative splicing of muscle and neural-related genes in the two mutants, respectively. Expression of Mef2-RB, an isoform of Mef2 gene that was downregulated due to splicing changes caused by H698R, partly rescues the climbing defects of the sf3b1-H698R mutant. Lariat sequencing reveals that the two sf3b1-H698 mutations cause aberrant selection of multiple intronic branch sites, with the H698R mutant using far upstream branch sites in the changed alternative splicing events. This study provides in vivo evidence from Drosophila that elucidates how these SF3B1 hotspot mutations alter splicing and their consequences in development and in the immune system., Author summary In the past decade, one of the important findings in the RNA splicing field has been that somatic SF3B1 mutations widely occur in many cancers. Including R625, H662, K666, K700 and E902, there are five hotspot mutation sites in the highly conserved HEAT repeats of SF3B1. Several kinds of H662 mutations have been found widely in MDS, AML, CLL and breast cancers; however, it remains unclear how these H662 mutations alter splicing and whether they have in vivo effects on development. To address these questions, in this manuscript, we first summarized the H662 mutations in human diseases and constructed two corresponding Drosophila mutant strains, sf3b1-H698D and -H698R using CRISPR-Cas9. Analyses of these two fly strains find that the two oppositely charged Sf3b1-H698 mutants are defective in development. In addition, one mutant has decreased climbing ability, whereas the other mutant has impaired immune response. Further RNA-seq allows us to find responsible genes in each mutant strain, and lariat sequencing reveals that both mutations cause aberrant selection of the intronic branch sites. Our findings provide the first in vivo evidence that Sf3b1 mutations result in defective development, and also reveal a molecular mechanism of these hotspot histidine mutations that enhance the use of cryptic branch sites to alter splicing. Importantly, we demonstrate that the H698R mutant prefers to use far upstream branch sites.

Doublesex is highly conserved and sex-specifically spliced in insect sex-determination pathways, and its alternative splicing (AS) is regulated by Transformer, an exonic splicing activator, in the model system of Drosophila melanogaster. However, due to the lack of a transformer gene, AS regulation of doublesex remains unclear in Lepidoptera, which contain the economically important silkworm Bombyx mori and thousands of agricultural pests. Here, we use yeast three-hybrid system to screen for RNA-binding proteins that recognize sex-specific exons 3 and 4 of silkworm doublesex (Bm-dsx); this approach identified BxRBP1/Lark binding to the exon 3, and BxRBP2/TBPH and BxRBP3/Aret binding to the exon 4. Investigation of tissues shows that BxRBP1 and BxRBP2 have no sex specificity, but BxRBP3 has – three of its four isoforms are expressed with a sex-bias. Using novel sex-specific silkworm cell lines, we find that BxRBP1 and BxRBP3 directly interact with each other, and cooperatively function as splicing repressors. Over-expression of BxRBP1 and BxRBP3 isoforms efficiently inhibits splicing of the exons 3 and 4 in the female-specific cells and generates the male-specific isoform of Bm-dsx. We also demonstrate that the sex-determination upstream gene Masc regulates alternatively transcribed BxRBP3 isoforms. Thus, we identify a new regulatory mechanism of doublesex AS in the silkworm, revealing an evolutionary divergence in insect sex-determination.

Ethnopharmacological relevance Buyang huanwu decoction (BYHWD) is a classic recipe in traditional Chinese medicine (TCM) to supplement Qi and activate blood. It has been used to recover the neural function after the injury of central nervous system for hundreds of years in China. Aim of the study This study investigated whether Buyang huanwu decoction (BYHWD) combined with bone marrow mesenchymal stem cells (BMSCs) transplantation had synergistic effect on neuroprotection of red nucleus neurons after spinal cord injury (SCI). Materials and methods Rubrospinal tract (RST) transection model was established and BMSCs were collected. The forelimb locomotor function was recorded using inclined plate test and spontaneous vertical exploration. cAMP level in red nucleus was detected with Enzyme-linked immunosorbent assay (ELISA). Morphology and number of red nucleus neurons was observed using Nissl’s staining. Expression of cAMP-response element binding protein (CREB), ras homolog gene family member A (RhoA) and nerve growth factor (NGF) in red nucleus was detected using immunohistochemistry, qRT-PCR and Western-blotting. Results The combination of BYHWD and BMSCs transplantation could improve the forelimb locomotor function significantly and give the red nucleus somas a better protection. Meanwhile, cAMP level, CREB and NGF increased, while RhoA decreased remarkably in the BYHWD+BMSCs group. Conclusions BYHWD combined with BMSCs transplantation had synergistic effect on neuroprotection of red nucleus neurons after SCI; the mechanism may be related to up-regulating cAMP level, activating the cAMP/CREB/RhoA signaling pathway, and promoting expression of NGF.

The minor spliceosome is evolutionarily conserved in higher eukaryotes, but its biological significance remains poorly understood. Here, by precise CRISPR/Cas9-mediated disruption of the U12 and U6atac snRNAs, we report that a defective minor spliceosome is responsible for spinal muscular atrophy (SMA) associated phenotypes in Drosophila. Using a newly developed bioinformatic approach, we identified a large set of minor spliceosome-sensitive splicing events and demonstrate that three sensitive intron-containing neural genes, Pcyt2, Zmynd10, and Fas3, directly contribute to disease development as evidenced by the ability of their cDNAs to rescue the SMA-associated phenotypes in muscle development, neuromuscular junctions, and locomotion. Interestingly, many splice sites in sensitive introns are recognizable by both minor and major spliceosomes, suggesting a new mechanism of splicing regulation through competition between minor and major spliceosomes. These findings reveal a vital contribution of the minor spliceosome to SMA and to regulated splicing in animals., Spinal muscular atrophy (SMA) is associated with minor splicing-related defects. Here the authors develop Drosophila models with minor spliceosomal-snRNA deletions, and demonstrate SMA-like phenotypes.

More than 70% of all agricultural pests are insects in the order Lepidoptera, which, unlike other related insect orders, are not very sensitive to RNAi, limiting genetic studies of this insect group. However, the reason for this distinct lepidopteran characteristic is unknown. Previously, using transcriptome analysis of the Asian corn borer Ostrinia furnacalis, we identified a gene, termed up56, that is up-regulated in response to dsRNA. Here we report that this Lepidoptera-specific gene encodes a nuclease that contributes to RNAi insensitivity in this insect order. Its identity was experimentally validated, and sequence analysis indicated that up56 encodes a previously uncharacterized protein with homologous sequences in seven other lepidopteran species. Its computationally predicted three-dimensional structure revealed a high structural similarity to human exonuclease I. Exposure to dsRNA in O. furnacalis strongly up-regulated this gene's expression, and the protein could digest single-stranded RNA (ssRNA), dsRNA, and dsDNA both in vitro and in vivo. Of note, we found that this up-regulation of up56 expression is faster than that of the gene encoding the key RNAi-associated nuclease Dicer. up56 knockdown in O. furnacalis significantly enhanced RNAi efficiency. Moreover, up56 overexpression in Drosophila melanogaster suppressed RNAi efficiency. Finally, up56 knockdown significantly increased the amount and diversity of small RNAs. Therefore, we renamed this protein RNAi efficiency-related nuclease (REase). In conclusion, we propose that REase may explain why lepidopterans are refractory to RNAi and that it represents a target for further research of RNAi efficiency in this insect order.

In Drosophila, dosage compensation globally upregulates the expression of genes located on male single X-chromosome. Maleless (MLE) helicase plays an essential role to incorporate the roX lncRNA into the dosage compensation complex (MSL-DCC), and such function is essentially dependent on its dsRNA-binding domains (dsRBDs). Here, we report a 2.90Å crystal structure of tandem dsRBDs of MLE in complex with a 55mer stem-loop of roX2 (R2H1). MLE dsRBDs bind to R2H1 cooperatively and interact with two successive minor grooves and a major groove of R2H1, respectively. The recognition of R2H1 by MLE dsRBDs involves both shape- and sequence-specificity. Moreover, dsRBD2 displays a stronger RNA affinity than dsRBD1, and mutations of key residues in either MLE dsRBD remarkably reduce their affinities for roX2 both in vitro and in vivo. In Drosophila, the structure-based mle mutations generated using the CRISPR/Cas9 system, are partially male-lethal and indicate the inter-regulation among the components of the MSL-DCC at multiple levels. Hence, our research provides structural insights into the interactions between MLE dsRBDs and R2H1 and facilitates a deeper understanding of the mechanism by which MLE tandem dsRBDs play an indispensable role in specific recognition of roX and the assembly of the MSL-DCC in Drosophila dosage compensation.

Serine/arginine (SR)-rich proteins are critical for the regulation of alternative splicing (AS), which generates multiple mRNA isoforms from one gene and provides protein diversity for cell differentiation and tissue development. Genetic evidence suggests that Drosophila genital-specific overexpression of SR-related nuclear matrix protein of 160 kDa (SRm160), an SR protein with a PWI RNA-binding motif, causes defective development only in male flies and results in abnormal male genital structures and abnormal testis. However, the molecular characterization of SRm160 is limited. Using the high-throughput sequencing of RNA isolated by crosslinking immunoprecipitation (HITS-CLIP) method in two sex-specific embryonic cell lines, S2 from the male and Kc from the female, we first identified the genome-wide RNA-binding characteristics of SRm160, which preferred binding to the exonic tri-nucleotide repeats GCA and AAC. We then validated this binding through both in vitro gel-shift assay and in vivo splicing of minigenes and found that SRm160 level affects AS of many transcripts. Furthermore, we identified 492 differential binding sites (DBS) of SRm160 varying between the two sex-specific cell lines. Among these DBS-containing genes, splicing factors were highly enriched, including transformer, a key regulator in the sex determination cascade. Analyses of fly mutants demonstrated that the SRm160 level affects AS isoforms of transformer. These findings shed crucial light on SRm160’s RNA-binding specificity and regulation of AS in Drosophila sex determination and development.

2-D pressure model in axial and radial direction was proposed to simulate response of copper subjected to micro laser shock peening (μLSP) according to the size effect in the propagation of shock wave induced by laser in microscale. Simulations under 1-D and 2-D pressure model were conducted respectively in order to explore the effect of pressure in radial direction. The results show that distribution of residual stress and plastic deformation in depth and width are obviously different, and response of copper under 2-D pressure model are more close to the experimental results. The pressure effect in radial direction in the propagation of shock wave shouldnt be ignored, and 2-D shock wave pressure model plays an important role in accurate simulation of μLSP.

Fidelity and efficiency of pre-mRNA splicing are critical for generating functional mRNAs, but how such accuracy in 5' splice site (SS) selection is attained is not fully clear. Through a series of yeast genetic screens, we isolated alleles of prp28 that improve splicing of suboptimal 5'SS substrates, demonstrating that WT-Prp28p proofreads, and consequently rejects, poor 5'SS. Prp28p is thought to facilitate the disruption of 5'SS-U1 snRNA pairing to allow for 5'SS-U6 snRNA pairing in the catalytic spliceosome; unexpectedly, 5'SS proofreading by Prp28p is dependent on competition with the stability of the 5'SS:U6 duplex, but not the 5'SS:U1 duplex. E404K, the strongest prp28 allele containing a mutation located in the linker region between adenosine triphosphatase (ATPase) subdomains, exhibited lower RNA-binding activity and enhanced splicing of suboptimal substrates before first-step catalysis, suggesting that decreased Prp28p activity allows longer time for suboptimal 5'SS substrates to pair with U6 snRNA and thereby reduces splicing fidelity. Residue E404 is critical for providing high splicing activity, demonstrated here in both yeast and Drosophila cells. Thus, the subdomain linker in Prp28p plays important roles both in splicing efficiency across species and in proofreading of 5'SS.

Electronic in-process dressing (ELID) grinding will be a main technology of ultra-precision grinding which has been widely adopted to the ultra-precision and high effectively machining of hard and brittle materials. This study puts forward a new environmental friendly bamboo charcoal bonded (BCB) grinding wheel and develops a new ELID grinding fluid. An oxide layer is mostly determined by the electric performance of grinding fluid in the experiment. This paper founds a model to forecast grinding fluid’s electric performance by BP neural network and MATLAB. This method can be used in developing of ELID grinding machining fluid to improve the ELID grinding effect.

Relative to other economically important marine animals, there is limited knowledge of the reproductive characteristics of the male Australian red claw crayfish Cherax quadricarinatus. In this study, the structure of the male reproductive system of C. quadricarinatus and the progression of spermatogenesis were examined histologically and using transmission electron microscopy (TEM). The male reproductive system of C. quadricarinatus is composed of paired testes, vasa deferentia, and genital appendixes. Each testis has a non-branched collecting duct and numerous attached seminal acini. Spermatogenesis occurs mainly in the seminal acini. Germ cell development is synchronous within each acinus, but not between different acini. Spermatids, formed after meiosis, undergo a complicated metamorphosis until the aflagellate spermatozoa are finally formed. Early in the metamorphosis, a highly convoluted membrane lamellar system is assembled in the cytoplasm as the chromatin begins to condense. The convolute...

Microscale laser shock peening (μLSP) can generate beneficial compressive stress distribution in the targets, as the used beam diameter in μLSP is at the order of micron equivalent with grain size, the treated material must be considered as anisotropic and inhomogeneous, this causes an asymmetrical distribution of residual stress. In this paper, shape factor σSF was introduced and defined to characterize the asymmetrical distribution of stress, optimum conditions of factors and the influence degree were explored based on Taguchi design with the optimal object of stress characterization values. The results show that shape factor is a significant characteristic of residual stress induced by μLSP, crystal orientation is the most important influence factor, but laser energy and peening number have significant influence on stress characterization values.

Micro-scale laser shock peening (μLSP) is a flexible and precise process that can potentially be applied to metallic structures in micro devices to improve strength and reliability performance. In order to understand the mechanism of μLSP process, a typical experiment was carried out for copper foils specimen with various process parameters. Surface morphology, deformation and hardness of the specimens were observed and characterized by 3D microscope system and situ nano-mechanical test system respectively. It was found that overlapping rate of laser spot has a little effect on microscopic deformation depth which increases slowly with the increasing of laser energy, and micro-hardness of the laser treated specimens was improved significantly.

Laser shot peening (LSP) has recently received more and more attention as a viable laser processing technology, since it can obtain the desirable residual compressive stress to improve fatigue life of the material by precisely controlling laser parameters. The purpose of this paper is mainly to explore the optimal residual compressive stress in the surface layer during LSP by statistical optimization algorithm. Based on the finite element analysis software ANSYS, Multi-island Genetic Algorithm (MIGA) is adopted to find the best solution of design requirements, the control parameters are laser pulse energy and spot diameter, while the aim parameters are residual compressive stress and deformation values, respectively. The results indicate that the optimal residual compressive stress obtained by integrated optimization technique can significantly improve the mechanical properties of the target after LSP. It provides a guiding importance for parameters optimization in future experimental research and practical application.

Microscale laser shock peening (μLSP) is a novel surface treating technology which oriented to microscale metal components in MEMS. Beneficial compressive residual stress is induced at the shocked region to improve the performance of microstructure based on wave-solid interactions. In this paper, the basic principle of μLSP and mechanism of wave-solid coupling were introduced, the influence factors on strengthening effects, such as micro-size effect, anisotropy, dislocation, stacking fault, grain boundary and surface energy were discussed from the microscopic point of view, the results provide theoretical guidance for further study.

Numerical study on fatigue life of ZK60 magnesium alloy plate before and after laser shot peening (LSP) was carried out in this paper. Based on the FEA model, residual stress field induced by LSP was analyzed, the fatigue life and position of weak area were predicted with ABAQUS software and MSC.Fatigue code, respectively, and the processing parameters were optimized. The results show that the fatigue life of ZK60 sheet metal by single LSP with one side and both sides increased by 72.9% and 78.5% compared with the untreated sample respectively. The size and depth of compressive residual stress increase with the increment of peening number, but when the peening number gets to a certain value, the residual stress reaches saturation and the fatigue life increase no longer significantly.

In order to understand and control the process of laser peen forming (LPF) of sheet metal, a developed FEM model was established and the process of LPF was simulated by FEM code ABAQUS. Special emphasis was posed on the part of the model devoted to the analysis of 3D residual stress distribution under laser shock wave loading. With the aid of simulation method, the influence of laser parameters, number of shots, peening tracks and the characteristics of sheet bending were investigated. The results indicate that the bending deformation of metal sheet is relative to laser peening numbers, peening coverage and the plate’s thickness, both upper and back layers of the deformed sheet exists residual compressive stresses.

Unlike typical cis-splicing, trans-splicing joins exons from two separate transcripts to produce chimeric mRNA and has been detected in most eukaryotes. Trans-splicing in trypanosomes and nematodes has been characterized as a spliced leader RNA-facilitated reaction; in contrast, its mechanism in higher eukaryotes remains unclear. Here we investigate mod(mdg4), a classic trans-spliced gene in Drosophila, and report that two critical RNA sequences in the middle of the last 5′ intron, TSA and TSB, promote trans-splicing of mod(mdg4). In TSA, a 13-nucleotide (nt) core motif is conserved across Drosophila species and is essential and sufficient for trans-splicing, which binds U1 small nuclear RNP (snRNP) through strong base-pairing with U1 snRNA. In TSB, a conserved secondary structure acts as an enhancer. Deletions of TSA and TSB using the CRISPR/Cas9 system result in developmental defects in flies. Although it is not clear how the 5′ intron finds the 3′ introns, compensatory changes in U1 snRNA rescue trans-splicing of TSA mutants, demonstrating that U1 recruitment is critical to promote trans-splicing in vivo. Furthermore, TSA core-like motifs are found in many other trans-spliced Drosophila genes, including lola. These findings represent a novel mechanism of trans-splicing, in which RNA motifs in the 5′ intron are sufficient to bring separate transcripts into close proximity to promote trans-splicing.

SRm160 is an SR-like protein implicated in multiple steps of RNA processing and nucleocytoplasmic export. Although its biochemical functions have been extensively described, its genetic interactions and potential participation in signaling pathways remain largely unknown, despite the fact that it is highly phosphorylated in both mammalian cells and Drosophila. To begin elucidating the functions of the protein in signaling and its potential role in developmental processes, we characterized mutant and overexpression SRm160 phenotypes in Drosophila and their interactions with the locus encoding the LAMMER protein kinase, Doa. SRm160 mutations are recessive lethal, while its overexpression generates phenotypes including roughened eyes and highly disorganized internal eye structure, which are due at least in part to aberrantly high levels of apoptosis. SRm160 is required for normal somatic sex determination, since its alleles strongly enhance a subtle sex transformation phenotype induced by Doa kinase alleles. Moreover, modification of SRm160 by DOA kinase appears to be necessary for its activity, since Doa alleles suppress phenotypes induced by SRm160 overexpression in the eye and enhance those in genital discs. Modification of SRm160 may occur through direct interaction because DOA kinase phosphorylates it in vitro. Remarkably, SRm160 protein was concentrated in the nuclei of precellular embryos but was very rapidly excluded from nuclei or degraded coincident with cellularization. Also of interest, transcripts are restricted almost exclusively to the developing nervous system in mature embryos.

By using the PAGE (Poly Acrylamide Gel Electrophoresis), the effect of water-borne Cu2+ on the isozymes in gills of E. sinensis was studied. The experimental groups were treated with different concentration of Cu2+ as 0.01, 0.10, 1.00, and 5.00 mg/l, respectively. The results showed that different isozymes had specific responses. The activity of LDH and MDH decreased gradually along with the increasing of Cu2+ level. Increasing of Cu2+ level followed by decreasing of ALP was observed, and the variation of EST wasn't significant. These isozymes variations reflected the toxic effects of Cu2+ sensitively.