Search

The electrocatalytic oxygen evolution reaction from H2O (OER) is essential in a number of areas like electrocatalytic hydrogen production from H2O. A Ni oxyhydroxide nanosheet (NiNS) is among the most widely studied OER catalysts but still suffers from low activity, sluggish kinetics, and poor stability. Herein, we incorporate MoO3 patches into NiNS to form a nanosheet with an intimate Ni-Mo interface (NiMoNS) for the OER. The overpotential at 10 mA cm-2 and Tafel slope on NiMoNS (260 mV, 54.7 mV dec-1) are lower than those on NiNS (296 mV, 89.3 mV dec-1), implying that higher activity and faster kinetics are achieved on NiMoNS. There is no change in electrocatalytic efficiency of NiMoNS after 18 h of OER, but the electrocatalytic efficiency of NiNS decreases by 56% after only 8 h of OER. Thus, NiMoNS has better stability. The intimate Ni-Mo interface promotes two-dimensional lateral growth of NiMoNS to form a surface area 1.5 times larger than that of NiNS, and facilitates electron transfer from Ni to Mo. This makes the Ni3+/Ni2+ ratio on the NiMoNS surface (1.32) higher than that on the NiNS surface (0.68). Moreover, the Ni3+/Ni2+ ratio on NiMoNS surface increases to 1.81 after 18 h of OER but the Ni3+/Ni2+ ratio on the NiNS surface decreases to 0.51 after 8 h of OER. Therefore, the NiMoNS surface has more abundant and stable Ni3+ sites which are catalytically active toward OER. This could be the reason for the enhanced activity, kinetics, and stability of NiMoNS. The results are very valuable for fabricating more efficient catalysts for electrocatalysis.

Solar-energy-driven photocatalysis, such as photocatalytic reduction of CO2, is promising simultaneously for the energy and environmental issues. Coating thin carbon layers with the thickness less than 10 nm on photocatalysts has been developed as an efficient strategy for enhancing the photocatalytic efficiency in recent years. In the present review, we summarize the crucial progress on carbon-coated photocatalysts. Origins for the improved light absorption, charge separation, reactant adsorption and photocatalytic stability on carbon-coated photocatalysts as well as the applications of carbon-coated photocatalysts are discussed. Future opportunities and challenges associated with carbon-coated photocatalysts are shown at the end of the review. We hope that the present review can trigger more deep insights on carbon-coated photocatalysts and provide new opportunities for developing low-cost but efficient photocatalysts.

Graphene oxide (GO) nanosheets are promising noble-metal-free catalysts. However, the catalytic activity and selectivity of GO are still very low. Herein, GO is first functionalized via noncovalent...

The electrocatalytic oxygen evolution reaction (OER) is an important factor affecting the efficiency of many energy systems, such as hydrogen production from water. However, there are still some pr...

Hydrogenation of CO2 into methanol is promising for achieving the sustainable energy economy, but still has some problems, e.g. low methanol selectivity and high operation pressures (>10 atm). Herein, we prepared a Pt/film hybrid with highly dispersed Pt nanoparticles, and combined Pt/film with In2O3 to form a Pt/film/In2O3 catalyst. By using a dielectric barrier discharge (DBD) plasma reactor, a CO2 conversion of 37.0% and a methanol selectivity of 62.6% are achieved in the hydrogenation of CO2 with H2 on Pt/film/In2O3 at 1 atm and 30 °C. These are higher than those on Pt/In2O3 prepared by the conventional high-temperature H2 reduction (24.9% and 36.5%) and commercial Cu/ZnO/Al2O3 (25.6% and 35.1%). The high-energy electrons of the DBD plasma trigger the CO2 hydrogenation at 1 atm and 30 °C. The higher Pt nanoparticles dispersion, film and In2O3 promote the adsorption of CO2 on Pt/film/In2O3, thus enhancing the hydrogenation of CO2 into methanol. These results are helpful for efficient methanol production from CO2 hydrogenation under atmospheric pressure.

The electrocatalytic oxygen evolution reaction from H

Electrocatalytic oxidation of water (i.e., oxygen evolution reaction, OER) plays crucial roles in energy, environment, and biomedicine. It is a key factor affecting the efficiencies of electrocatalytic reactions conducted in aqueous solution, e.g., electrocatalytic water splitting and glucose oxidation reaction (GOR). However, electrocatalytic OER still suffers from problems like high overpotential, sluggish kinetics, and over-reliance on expensive noble-metal-based catalysts. Herein, 15 nm thick carbon-based shell coated tungsten oxide (CTO) nanospheres are loaded on nickel foam to form CTO/NF. An enhanced electrocatalytic OER is triggered on CTO/NF, with the overpotential at 50 mA cm-2 (317 mV) and the Tafel slope (70 mV dec-1) on CTO/NF lower than those on pure tungsten oxide (360 mV, 117 mV dec-1) and noble-metal-based IrO2 catalysts (328 mV, 96 mV dec-1). A promoted electrocatalytic GOR is also achieved on CTO/NF, with efficiency as high as 189 μA mM-1 cm-2. The carbon-based shell on CTO is flexible for electron transfer between catalyst and reactants and provides catalytically active sites. This improves reactant adsorption and O-H bond dissociation on the catalyst, which are key steps in OER and GOR. The carbon-based shell on CTO retains the catalyst as nanospheres with a higher surface area, which facilitates OER and GOR. It is the multiple roles of the carbon-based shell that increases the electrocatalytic efficiency. These results are helpful for fabricating more efficient noble-metal-free electrocatalysts.

Graphene oxide (GO) nanosheets are promising noble-metal-free catalysts. However, the catalytic activity and selectivity of GO are still very low. Herein, GO is first functionalized via noncovalent interactions by an aspartic acid modified anhydride having COOH groups to form A-GO. A-GO is more conductive and hydrophilic than GO and P-GO synthesized via functionalizing GO by a COOH-free anhydride. Then, we load CdS nanoparticles, which are responsible for absorbing light to produce charge carriers, on A-GO to fabricate a CdS/A-GO photocatalyst without noble metals for the photoreduction of CO

A selective CO evolution from photoreduction of CO2 in water was achieved on a noble-metal-free, carbide-based composite catalyst, as demonstrated by a CO selectivity of 98.3% among all carbon-containing products and a CO evolution rate of 29.2 μmol h–1, showing superiority to noble-metal-based catalyst. A rapid separation of the photogenerated electron–hole pairs and improved CO2 adsorption on the surface of the carbide component are responsible for the excellent performance of the catalyst. The high CO selectivity is accompanied by a predominant H2 evolution, which is believed to provide a proton-deficient environment around the catalyst to favor the formation of hydrogen-deficient carbon products. The present work provides general insights into the design of a catalyst with a high product selectivity and also the carbon evolution chemistry during a photocatalytic reaction.

Developing noble-metal-free photocatalysts highly flexible for separating the photogenerated electron-hole pairs is crucial for the solar-energy-driven photocatalysis, but still remains an open question. Herein, we fabricated two dimensional Co3S4 nanosheets with a thickness of about 10 nm, and applied the nanosheets to support CdS nanoparticles (∼5 nm) to form a noble-metal-free CdS/Co3S4 photocatalyst with a higher ability in charge separation. In the visible-light-driven photocatalytic H2O splitting, an enhanced H2 evolution (1083.9 μmol h−1) was achieved on CdS/Co3S4, as compared with those on the CdS-nanoparticle-loaded Co3S4 nanoparticles (775.5 μmol h−1) and noble-metal-based CdS/Pt photocatalyst (566.3 μmol h−1). The enhanced photocatalytic performance is the result of the multiple roles of the Co3S4 nanosheets in the photocatalytic reaction, including promoting electron-hole separation, providing catalytically active sites and suppressing the aggregation of the CdS nanoparticles responsible for light absorption.

Developing efficient noble-metal-free catalysts for photocatalysis under the irradiation of visible light, which is the main part of sunlight (44%), would represent a significant step toward making photocatalysis a more competitive strategy for solar energy utilization. Herein, nanospheres (∼200 nm) containing dimolybdenum carbide and carbon (Mo2C@C) were used to support CdS nanoparticles (∼5 nm) to form a noble-metal-free CdS/Mo2C@C photocatalyst. CdS/Mo2C@C shows an enhanced visible-light-driven photocatalytic H2 evolution from water, with a H2 evolution rate of 554.3 μmol h–1, which is about 2 times higher than that on the widely used noble-metal-based CdS/Pt photocatalyst. Improved absorption of the visible light and separation of the photogenerated electron–hole pairs could be the origins for the enhanced photocatalytic activity of CdS/Mo2C@C. The findings of this work will open a new door for fabricating efficient noble-metal-free photocatalysts for visible-light-driven photocatalysis.

Photocatalytic CO2 reduction on metal-oxide-based catalysts is promising for solving the energy and environmental crises faced by mankind. The oxygen vacancy (V o) on metal oxides is expected to be a key factor affecting the efficiency of photocatalytic CO2 reduction on metal-oxide-based catalysts. Yet, to date, the question of how an V o influences photocatalytic CO2 reduction is still unanswered. Herein, we report that, on V o-rich gallium oxide coated with Pt nanoparticles (V o-rich Pt/Ga2O3), CO2 is photocatalytically reduced to CO, with a highly enhanced CO evolution rate (21.0 μmol·h−1) compared to those on V o-poor Pt/Ga2O3 (3.9 μmol·h−1) and Pt/TiO2(P25) (6.7 μmol·h−1). We demonstrate that the V o leads to improved CO2 adsorption and separation of the photoinduced charges on Pt/Ga2O3, thus enhancing the photocatalytic activity of Pt/Ga2O3. Rational fabrication of an V o is thereby an attractive strategy for developing efficient catalysts for photocatalytic CO2 reduction.

A selective CO evolution from photoreduction of CO

Chromatin is a highly organized and dynamic structure in eukaryotic cells. The change of chromatin structure is essential in many cellular processes, such as gene transcription, DNA damage repair and others. Anti-silencing function 1 (ASF1) is a histone chaperone that participates in chromatin higher-order organization and is required for appropriate chromatin assembly. In this study, we identified the E2 ubiquitin-conjugating enzyme RAD6 as an evolutionary conserved interacting protein of ASF1 in D. melanogaster and H. sapiens that promotes the turnover of ASF1A by cooperating with a well-known E3 ligase, MDM2, via ubiquitin-proteasome pathway in H. sapiens. Further functional analyses indicated that the interplay between RAD6 and ASF1A associates with tumorigenesis. Together, these data suggest that the RAD6-MDM2 ubiquitin ligase machinery is critical for the degradation of chromatin-related proteins.

Indium-oxide (In

Inspired by natural photosynthesis, biomaterial-based catalysts are being confirmed to be excellent for visible-light-driven photocatalysis, but are far less well explored. Herein, an ultrathin and uniform biofilm fabricated from cold-plasma-assisted peptide self-assembly was employed to support Eosin Y (EY) and Pt nanoparticles to form an EY/Pt/Film catalyst for photocatalytic water splitting to H2 and photocatalytic CO2 reduction with water to CO, under irradiation of visible light. The H2 evolution rate on EY/Pt/Film is 62.1 μmol h(-1), which is about 5 times higher than that on Pt/EY and 1.5 times higher than that on the EY/Pt/TiO2 catalyst. EY/Pt/Film exhibits an enhanced CO evolution rate (19.4 μmol h(-1)), as compared with Pt/EY (2.8 μmol h(-1)) and EY/Pt/TiO2 (6.1 μmol h(-1)). The outstanding activity of EY/Pt/Film results from the unique flexibility of the biofilm for an efficient transfer of the photoinduced electrons. The present work is helpful for designing efficient biomaterial-based catalysts for visible-light-driven photocatalysis and for imitating natural photosynthesis.