Search

NiOx, prepared via the sputtering method, exhibits low conductivity and energy level mismatch with the perovskite layer, thereby limiting further enhancements in the performance of perovskite solar modules (PSMs). Unlike traditional methods that enhance the performance of NiOx through reactive sputtering or directly doping NiOx targets with metal ions, both of which incur high costs and low efficiency, we employ an evaporation method using LiF to achieve efficient and low-cost doping of NiOx. Compared to the pristine NiOx, the incorporation of LiF significantly increases the conductivity of NiOx. Additionally, the incorporation of LiF enhances the quality of the deposited perovskite films, as well as the energy level alignment and symmetry between NiOx and the perovskite, effectively improving the hole extraction and transport capabilities between NiOx and the perovskite. As a result, the PSM (active area of 57.30 cm²) fabricated in air achieves an impressive efficiency of 19.54%. Furthermore, the unencapsulated PSM retains 80% of its initial efficiency after 700 h of continuous illumination, whereas the NiOx-based PSM drops to 80% after only 150 h. This study provides a simple and low-cost method for doping NiOx, which is of great significance for the further industrialization of PSMs. [ABSTRACT FROM AUTHOR]

In recent years, the organic–inorganic hybrid perovskite community has been widely employed as the photo-active layer in optical-electronic devices. The black α-phase formamidinium lead iodide (FAPbI3) is the most popular perovskite for realizing high-efficiency solar cells due to its suitable bandgap. However, the issue of stability is also a concern in the research on FAPbI3 solar cells. In this study, different ammonium ions, such as butylamine (BA), guanidine (GA), and butylene diamine (BDA), which are commonly used to construct two-dimensional perovskites, including Ruddlesden–Popper, Dion–Jacobson, and alternating cations in the interlayer space, respectively, were introduced in the fabrication of FAPbI3 using a sequential deposition method. Several structures of PbI2 precursor films were formed by introducing the aforementioned ions, which exhibited different arrangements and connection modes in lead iodides. BA-PbI2 precursor films exhibited higher specific surface areas, which were beneficial to the diffusion, ion exchange, and sequential reaction of FA+. The BDA-PbI2 precursor film slowed down the sequential reaction of FAPbI3 because of reduced van der Waals bonds. The nucleation dynamics and degradation processes of perovskites were deeply investigated in this study. Solar cells based on BA-PbI2, GA-PbI2, and BDA-PbI2 were also fabricated. [ABSTRACT FROM AUTHOR]

Inorganic tin–lead perovskites with low bandgap (1.2–1.4 eV) are desired absorber materials for solar cells owing to their ideal bandgap and compositional stability. However, such tin–lead perovskites are currently subject to inferior power conversion efficiency (PCE) and the origin remains unclear. Here, for the first time, we report the metal-cation-derived unsynchronized crystallization behavior of inorganic tin–lead perovskite, exemplifying by a representative composition CsPb0.7Sn0.3I3. A tin-perovskite-targeted crystallization modulation agent, 1-(4-fluorophenyl) piperazine (1-4FP), is introduced to synchronize the B-site alloying through its strong targeted bonding with SnI2, resulting in substantially enhanced film quality with better morphology and photoelectrical properties. Furthermore, first-principles molecular dynamics simulations reveal that the agent regulates the crystallization route toward the pure phase of CsPb0.7Sn0.3I3 by suppressing the preforming of tin perovskite. With our proposed approach, the best device attains PCE of 17.55%, which is record-high for inorganic tin–lead perovskite solar cells. In addition, treated devices show excellent stability with only 10% and negligible loss after being exposed to 1 sun intensity for 700 h and being stored in N2 after over 4000 h, respectively. Our findings open a new avenue of crystallization route design in inorganic tin–lead perovskites, so as to obtaining high-quality perovskite films and associated solar cells. [ABSTRACT FROM AUTHOR]

The high speed development of industries such as new energy power, medical instruments, under¬ground exploration, and high power pulses are demanding more and more dielectric capacitors. Polymer based film capacitors are attracting attention for their high power density, high breakdown field strength, high reliability, low loss, and small size. However, the low energy density due to the low dielectric constant of the polymer itself has limited IS application n high-end fields. And polymer as an effective way to enhance the energy density by compounding with other organic or inorganic materials in different ways. This paper introduces the current research status of polymer based film capacitors compounded with inorganic materials, analyzes the advantages and shortcomings of different compounding methods, and discusses the future development prospects of polymer based film capacitors. [ABSTRACT FROM AUTHOR]