Search

Abstract Background The spleen plays an important role in systemic antitumor immune response, but whether spleen imaging features have predictive effect for prognosis and immune status was unknown. The aim of this study was to investigate computed tomography (CT)‐based spleen radiomics to predict the prognosis of patients with esophageal squamous cell carcinoma (ESCC) underwent definitive radiotherapy (dRT) and to try to find its association with systemic immunity. Methods This retrospective study included 201 ESCC patients who received dRT. Patients were randomly divided into training (n = 142) and validation (n = 59) groups. The pre‐ and delta‐radiomic features were extracted from enhanced CT images. LASSO‐Cox regression was used to select the radiomics signatures most associated with progression‐free survival (PFS) and overall survival (OS). Independent prognostic factors were identified by univariate and multivariate Cox analyses. The ROC curve and C‐index were used to evaluate the predictive performance. Finally, the correlation between spleen radiomics and immune‐related hematological parameters was analyzed by spearman correlation analysis. Results Independent prognostic factors involved TNM stage, treatment regimen, tumor location, pre‐ or delta‐Rad‐score. The AUC of the delta‐radiomics combined model was better than other models in the training and validation groups in predicting PFS (0.829 and 0.875, respectively) and OS (0.857 and 0.835, respectively). Furthermore, some spleen delta‐radiomic features are significantly correlated with delta‐ALC (absolute lymphocyte count) and delta‐NLR (neutrophil‐to‐lymphocyte ratio). Conclusions Spleen radiomics is expected to be a useful noninvasive tool for predicting the prognosis and evaluating systemic immune status for ESCC patients underwent dRT.

The Mg-Al-RE series heat-resistant magnesium alloys are applied in automotive engine and transmission system components due to their high-temperature performance. However, after serving at a high temperature for a long time, the Al11RE3 phase coarsened and even decomposed, while the Mg17Al12 phase grew and dissolved, which limits the service temperature of Mg-Al-RE series heat-resistant magnesium alloys to a maximum of 175 °C. In this study, a new preparation method for in situ AlN particles was presented. The AlN/Mg-4Al-4La-0.3Mn composites were prepared by a master alloy and casting method. The effects of various contents of AlN (0.5–3.0 wt.%) on the microstructure and mechanical properties of the Mg-4Al-4La-0.3Mn (AE44) alloy at room (25 °C) and high temperatures (150–250 °C) were investigated. Microstructure analysis revealed that the inclusion of AlN led to a reduction in both the grain size and second phase size in the AE44 alloy, while also improving the distribution of the second phase. The average grain size, Al11La3 phase, Al2La phase, and Al3La phase of the 2.0 wt.% AlN/AE44 composite were 135.7, 9.6, 1.9, and 12.6 μm, respectively, which were significantly lower than those of the AE44 matrix alloy (179.8, 12.6, 3.3, 17.8 μm). The refinement was attributed to the ability of AlN particles to serve as heterogeneous nucleation cores for α-Mg and, at the same time, impede the growth of the solid–liquid interface, eventually leading to grain refinement. With the increase in the AlN content, the mechanical properties of composites initially exhibited an increase at both room and high temperatures, followed by a subsequent decrease. When the AlN content was 2.0 wt.%, the composite exhibited optimal strength and plasticity matching. At room temperature, the TYS, UTS, and EL values of the 2.0 wt.% Mg-4Al-4La-0.3Mn composite were 96 MPa, 175 MPa, and 7.0%, respectively, which were increased by 26 MPa, 27 MPa, and 0.7% when compared with the base alloy. The TYS of the 2.0 wt.% Mg-4Al-4La-0.3Mn composite at 150 °C, 200 °C, and 250 °C were 17 MPa, 14 MPa, and 22 MPa higher than those of the matrix alloy, respectively. The main strengthening mechanisms were second phase strengthening, load transfer strengthening, and thermal mismatch strengthening. At elevated temperatures, AlN particles effectively pinned the grain boundaries, inhibiting their migration, and hindered dislocation climbing, resulting in excellent mechanical properties of the composites at high temperatures. This study contributes to the advancement of in situ AlN particle preparation methods and the exploration of effects of AlN on the properties and microstructure of Mg-Al-RE alloys at high temperatures (150–250 °C).

Introduction: The purpose of this study was to identify the chemical components of Massa Medicata Fermentata (MMF) in different fermentation methods, analyze its regulatory effects on gastrointestinal propulsion and intestinal flora in mice with food accumulation, and further explore its mechanism of action in the treatment of dyspepsia.Methods: The chemical compositions of three kinds of MMF were identified using the UPLC-Q- Exactive Orbitrap mass spectrometer. A model of spleen deficiency and food accumulation in mice was established. The gastric emptying rate and intestinal propulsion rate were calculated, serum gastrin concentration and cholinesterase activity were measured, and 16S rRNA microbial detection was performed in different groups of mouse feces.Results: The results showed that a total of 95 chemical components were identified from the three MMF extracts, 62 of which were the same, but there were differences in flavonoids and their glycosides, organic acids, and esters. MMF, PFMMF, and commercial MMF could all significantly improve the gastric emptying rate, intestinal propulsion rate, and GAS concentration in the serum of model mice; PFMMF has a better effect, while there was no significant difference in cholinesterase activity among the groups (p > 0.05). The 16S rRNA sequencing results showed that the MMF and PFMMF could increase the content of beneficial bacteria Bacteroidetes and decrease the pathogenic bacteria Verrucomicrobia in the intestines of model mice, while the commercial MMF could not.Discussion: Studies suggest that MMF has a variety of possible mechanisms for improving food accumulation and treating gastrointestinal dyspepsia, which provides reference value for the quality evaluation and clinical application of MMF.

Abstract Biofuels are renewable alternatives to fossil fuels. Levopimaric acid‒base biofuels have attracted increasing attention. However, their stability remains a critical issue in practice. Thus, there is a strong impetus to evaluate the thermal stability of levopimaric acid. Through thermogravimetry (TG) and a custom-designed mini closed pressure vessel test (MCPVT) operating under isothermal and stepped temperature conditions, we investigated thermal oxidation characteristics of levopimaric acid under oxygen atmosphere. Thin-layer chromatography (TLC) and iodimetry were used to measure the hydrogen peroxides generated by levopimaric acid oxidation. A high pressure differential scanning calorimeter (HPDSC) was used to assess hydroperoxide thermal decomposition characteristics. Gas chromatography-mass spectrometry (GC-MS) was used to characterize the oxidation products. The thermal decomposition kinetics of levopimaric acid were thus elucidated, and a high peroxide value was detected in the levopimaric acid. The decomposition heat (QDSC) and exothermic onset temperature (Tonset) of hydroperoxides were 338.75 J g−1 and 375.37 K, respectively. Finally, levopimaric acid underwent a second-stage oxidation process at its melt point (423.15 K), resulting in complex oxidation products. Thermal oxidation of levopimaric acid could yield potential thermal hazards, indicating that antioxidants must be added during levopimaric acid application to protect against such hazardous effects.

This study aims to extract an active heteropolysaccharide Chia seed polysaccharide (CSP-A) and further purified by DEAE Sepharose Fast Flow and Sepharose CL-6B chromatographic column, characterize its structure, and evaluate its antioxidant and immunomodulatory activities. Structural analysis revealed that CSP-A was composed of d-mannose, d-glucuronic acid and d-xylose in a molar ratio of 1:3:4 with molecular weight of 1.688 × 105 Da, owning 4 sugar residues of β-d-Manp-(1→, →4)-α-d-GlcpA-(1→, →2,4)-β-d-Xylp-(1→, and → 4)-β-d-Manp-(1 →. Congo red assay and microscopic characteristics showed that CSP-A in its solution may possess a helical conformation. In vitro experiments showed that CSP-A had moderate DPPH· and OH· scavenging activities. CSP-A also enhanced the phagocytosis ability of RAW 264.7 cells and prompted the release of NO, TNF-α, IL-6 and IL-1β from RAW 264.7 cells, which indicated CSP-A had immune regulation effect. This experiment provides scientific basis for further utilization and development of chia seeds, a kind of functional food.

Let $ F $ be a finite field of characteristic $ p $ having $ q = p^n $ elements and $ G $ be an abelian group. In this paper, we determine the structure of the group of units of the group algebra $ FG $, where $ G $ is an abelian group of order $ 17\leq |G|\leq 20 $.

The karst landscape is widespread in the southern region of China. As a result of underground mining activities, the original stress equilibrium is disrupted, causing the redistribution of stress in the overlying rock layer, inducing the longitudinal fracture of mining to expand and penetrate upwards, resulting in the rupture and destabilization of the karst cave roof, thus triggering a series of engineering problems such as karst cave collapse, landslide, the discontinuous deformation of the ground surface, and soil erosion. In order to study the evolutionary characteristics of buried rock fissures in shallow coal seam mining under the karst landform, taking the shallow coal seam with the typical karst cave development landform in Guizhou as the engineering background, based on the similarity simulation experiment and fractal theory, the evolution law of buried rock fissures and network fractal characteristics under the disturbance of the karst landform mining are analyzed. The research shows that the mining-induced fracture reaches the maximum development height of 61 m on the left side of the cave, and the two sides of the cave produce uncoordinated deformation. The separation fracture below the cave is relatively developed, and the overall distribution pattern of the cave rock fracture network presents a “ladder” shape. The correlation coefficient of the fractal dimension of the rock fractures under different advancing distances is more than 0.90, and the rock fracture network under the karst landform has high self-similarity. The variation of fractal dimension with the advancing degree of the working face can be divided into four stages. The first and second stages show an exponential growth trend, and the third and fourth stages show linear changes with slopes of 0.0007 and 0.0014, respectively. The fluctuation of the fractal dimension is small. The periodic weighting of the upper roof in the cave-affected zone is frequent, the fragmentation of the fractured rock mass becomes larger, and the fractures of the upper rock mass are relatively developed. The research results can provide a reference for the study on the evolution law of mining-induced rock fissures under similar karst landforms.

In this study, silicoaluminophosphate (SAPO)-34 and Me (Me = Cr, Co)-modified SAPO-34 were synthesized and used as catalysts to investigate the catalytic performance by means of a probe reaction from ethanol to ethylene. The metal oxides were loaded on the SAPO-34 support via an impregnation method. The synthesized catalysts were characterized using XRD, SEM, EDX, FT-IR, NH3-TPD, BET, and TGA techniques. Compared to SAPO-34, SAPO-34 doped with metal oxides showed the same chabazite (CHA) topology. The structure and properties of the catalyst were further optimized by varying the amount of Me. The experimental results showed that Co-Cr/SAPO-34 exhibited the best catalytic performance when the reaction temperature reached 400 °C at a weight hourly space velocity (WHSV) of 3.5 h−1, for which the single-pass conversion of ethanol was determined as 99.15%, and the selectivity of ethylene was 99.4% at an optimum catalytic performance in the reaction of up to 600 min. In addition, Co-Cr/SAPO-34 exhibited better catalytic activity and anti-coking ability than pure SAPO-34, which was attributed to its enhanced pore structure and moderate acidity. It can also be concluded from the results of this experiment that the performance of the Co-Cr bimetal-supported catalyst is better than that of the Cr mono-metal catalyst.

Carbon-based solid acid catalysts were prepared using rice straw (RS) waste, and the effects of carbonization temperature and sulfonation temperature on the catalytic activity were investigated. The properties of the catalysts were characterized using thermo gravimetric (TG), scanning electron microscope (SEM), Brunauer−Emmet−Teller (BET), Fourier transform infrared spectroscopy (FT-IR), temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS), and their activities were investigated through the hydration of α-pinene. The conversion of α-pinene and the selectivity of α-terpineol reached 67.60% and 57.07% at 80 °C and atmospheric pressure in 24 h, respectively. The high catalytic capacity of the catalyst is attributed to the high acid site density and high porosity of the catalyst. TPD analysis and FT-IR spectroscopy showed that the catalyst produced by low-temperature carbonization at 300 °C followed by low-temperature sulfonation at 80 °C had abundant strong acid sites (0.82 mmol/g), which can effectively inhibit the side reactions of hydrated α-pinene. The total acidity reached 2.87 mmol/g. N2-physisorption analysis clearly indicated that the obtained catalysts were mesopore-predominant materials, and the SBET and VTotal of catalysts reached 420.9 m2/g and 4.048 cm3/g, respectively. Preparation of the catalyst involves low energy consumption, and its cheap raw materials make the whole process simple, economical, and environmentally friendly.

A self-designed reaction device was used as a promising equipment to investigate the oxidation characteristics and kinetics of rosin pentaerythritol ester (RPE) under UV irradiation. Photo-oxidation kinetics and the initial quantum yield (Φ) of RPE were calculated. The initial oxidation product of the photo-oxidation reaction—peroxide was analyzed by iodimetry. The peroxide concentration is related to the light intensity (I) and the temperature (T), and the increasing T and I would destabilize the RPE by accelerating peroxide forming. Photo-oxidation of RPE follows the pseudo first-order reaction kinetics. The relationship between activation energy and logarithm of light intensity (ln I) is linear, and it is expressed as Ea = −4.937ln I + 45.565. Φ was calculated by the photo-oxidation kinetics, and the average value of Φ was 7.19% in the light intensity range of 200⁻800 μW cm−2. This research can provide fundamental information for application of RPE, and help obtain a better understanding of the stability of rosin esters.

The hole-transporting layer (HTL), a pivotal component of perovskite solar cells (PSCs), can significantly improve device performance. The unique light-harvesting and charge-transport capabilities of porphyrin derivatives have facilitated their adoption in solar cell applications, showcasing their potential as holetransporting materials for PSCs. This study introduces an electrochemical polymerization method to deposit thin films of three distinct porphyrins as HTLs in PSCs. These polymerized films demonstrate exceptional thermal stability, with nickel-centered porphyrin films highly enhancing the power conversion efficiency, attributed to optimal energetic alignment and effective contact properties. Crucially, devices utilizing this approach exhibit outstanding long-term stability, maintaining 88% of their initial efficiency after 2200-hour storage under ambient conditions. This performance highlights the considerable promise of porphyrin-based materials in photovoltaic applications, suggesting that electrochemical polymerization could lead the way in developing efficient and durable PSCs. The innovative use of electrochemical polymerization represents a noteworthy contribution to the field, opening new avenues for the development of efficient and stable PSCs. [ABSTRACT FROM AUTHOR]

Abstract Background Obesity is characterized by excessive fat accumulation, which is related with abnormal pluripotency of mesenchymal stem cells (MSCs). Recently, there is growing evidence that the disorder of maternal vitamin D (VD) intake is a well-known risk factor for long-term adverse health outcomes to their offspring. Otherwise, less is known of its repercussion and underlying mechanisms on the different differentiation potential of MSCs. Methods Four-week-old female C57BL/6J mice were fed with different VD reproductive diets throughout the whole pregnancy and lactation. The characteristics of BMSCs from their seven-day male offspring, VDR knockdown establishment of HuMSCs and HuMSCs under the different VD interventions in vitro were confirmed by flow cytometry, RT-PCR, and immunofluorescence. The roles of VD on their mitochondrial dysfunction and differentiation potential were also investigated. Then their remaining weaned male pups were induced by administrating high-fat-diet (HFD) for 16 weeks and normal fat diet was simultaneously as controls. Their lipid accumulation and adipocytes hypertrophy were determined by histological staining and related gene expressions. Results Herein, it was proved that imbalance of early-life VD intake could significantly aggravate the occurrence of obesity by inducing the adipogenesis through affecting the VD metabolism and related metabolites (P