Search

Abstract Introduction Over the years, implant therapy has been a commonly used treatment option for individuals who are partially or totally edentulous, with a long-term success rate of over 90%. With significant advancements in biomaterials and technology, implant dentistry can now conduct prosthetic rehabilitations in the majority of patients catering to all types of needs. However, in order to meet the demands of a patient base that is always growing, new trends in implantology are emerging in recent years that are focused on minimally invasive surgery and financial sustainability. In certain clinical scenarios, connecting teeth and implants to support fixed partial prosthesis (FPPs) may be a predictable and workable course of treatment. Materials and methods 22 patients were selected for this study who had tooth and implant supported prosthesis placed as a final restoration. Out of these 22 patients; 12 were male and 10 were female patients. Implants were placed following proper protocol and if grafting procedures were required they were carried out. A second stage surgical procedure was carried out and delayed loading protocols were followed. The statistical analysis was done using the IBM SPSS 24.0, Chicago, USA. The survival of the implants and teeth were measured by the Kaplan Meier survival scale. Bone loss was assessed at baseline(upon loading), 12 months and 24 months. Results The implant survival rate was measured at 6 months, 12 months, 18 months and 24 months. At 24 months, one implant showed failure, so the survival rate of the implants were 95.4%. Bone loss of 1 mm was seen around one implant at 12 months. Bone loss of 1 and 2 mm was present around two implants and one implant respectively at 24 months. Conclusion From the results of this study, we can conclude that tooth implant supported prosthesis show very good survival when used in rehabilitation cases.

Abstract Introduction This study focuses on temporomandibular disorders (TMDs), which affect the temporomandibular joint and related muscles and have multiple causes. Recent studies have examined the connection between menstrual cycles, estrogen levels, and TMDs, but results are inconsistent, highlighting the need for more research. The aim is to explore the prevalence of TMDs in pregnant women and consider how hormonal changes during pregnancy might influence these disorders. Methods In this cross-sectional case-control study, we compared 32 pregnant women with 35 non-pregnant women. We evaluated several TMD-related factors such as pain levels, chronic pain classification, scores on the Jaw Functional Limitation Scale-20 and Oral Behaviors Checklist, and psychological health. We used various statistical methods including descriptive statistics, chi-square tests, linear regression, and adjustments for multiple comparisons to analyze the data. Results Pregnant women showed different pain perceptions, generally reporting less pain and lower severity. Nonetheless, these differences were not uniform across all TMD-related measures. Linear regression did not find a consistent link between pregnancy and TMD scores, except for chronic pain grade, which was not significant after adjusting for multiple comparisons. There was a significant relationship between depression and TMD severity, emphasizing the need to consider mental health in TMD evaluations. Discussion The findings suggest that pregnancy is neither a risk nor a protective factor for TMD. Differences in pain perception, functional status, and psychological health were observed in pregnant women but were not consistent for all TMD-related aspects. The role of estrogen in TMJ health and TMD risk is complex and requires further study. The research highlights the necessity of including mental health, especially depression, in TMD assessments. More comprehensive research with larger sample sizes is essential to better understand the connections between pregnancy, TMD, and hormones, aiming to improve TMD management in pregnant women and others.

Abstract Background The temporomandibular joint (TMJ) is a complex joint that facilitates mandibular movements during speech, chewing, and swallowing activities. The Axis I evaluation of the DC/TMD focuses on assessing physical diagnoses related to TMDs. It includes an assessment of pain and functional limitations, such as jaw opening range, joint sounds, and joint tenderness. The Axis II evaluation of the DC/TMD provides information on the patient’s psychological status and quality of life. This Systematic Review with Meta-Analysis aimed to evaluate the accuracy of Temporomandibular Disorders diagnosis considered through the Diagnostic Criteria for Temporomandibular Disorder (DC/TDM) axis II compared to the Axis I evaluations. Methods A search was made in PubMed, Web of Science and Lilacs for articles published from the inception until 20 January 2023. We applied the Population, Exposure, Comparator, and Outcomes (PECO) model [1] to assess document eligibility. Only studies that evaluated patients by DC/TMD Axis I and Axis II were considered. Review Manager version 5.2.8 (Cochrane Collaboration) was used for the pooled analysis. We measured the odds ratio (OR) between the two groups (Axis I and Axis II). Results Fifty-one articles were selected because of the search. Four papers were excluded before the screening: 2 pieces were not in English, and two were reviewed. The remaining 47 articles were selected for the title and abstract screening to evaluate whether they met the PECO criteria. Among these, four papers were established; the overall effect showed that there was no difference in TMD diagnosis between Axis I and Axis II (RR 1.17; 95% CI: 0.80– 1.71; Z:0.82; P = .41), suggesting that there is no difference between Axis I and Axis II. Conclusion In conclusion, DC/TMD is an effective tool for the diagnosis of TMD. It improves the accuracy of TMD diagnosis, allows for the classification of subtypes, and assesses psychosocial factors that may impact the development or maintenance of TMD symptoms.

Abstract Introduction The prevalence of adults with partially dental arches is expected to be more than imagined and patients requiring replacement of missing teeth are slowly increasing in number too. Removable partial dentures are known to provide for substantial replacement for the missing teeth with also added advantages when compared to fixed or implant prosthesis, mainly in elderly patients. Denture base material performance and durability are greatly influenced by wettability and water contact angle. In the case of dentures; adequate moisture distribution is necessary to ensure excellent wettability which has an influence on comfort and oral health. The purpose of conducting this study was to find out whether the advancements made using PEEK (Polyether ether ketone) would prove to be more beneficial than the current upgrades in the current material spectrum. Materials and methods This study was performed under in vitro conditions. All the fabrication and processing was done only by one operator. The materials used were divided into three groups each comprising 20 samples. Group A was modified polymethylmethacrylate (Bredent Polyan), Group B was polyoxymethylene acetal resin (Biodentaplast) and Group C was PEEK. An Ossila Goniometer was used to measure the contact angle. The three types of liquids used for the testing included distilled water, natural saliva and mouth wetting solution (Wet Mouth Liquid, ICPA India). Human saliva was collected from an individual with no medical conditions and normal salivary secretion. Results The data was analyzed using One-way ANOVA test and a pairwise comparison using the Post Hoc Tukey’s Honest Significant Difference. Table 1 consists of the mean water contact angles of the denture base materials and mean contact angles of various denture base materials. In saliva, mouth wetting solution and distilled water, the highest mean and least mean contact angle was seen in Polyan and Biodentaplast respectively. A signicant difference was seen between PEEK and Polyan and Biodentaplast and Polyan on further comparison. Conclusion From the resources and the materials at our disposal, it could be concluded that Polyan, Biodentaplast and PEEK and could be used as viable options in cast partial denture framework.

Abstract Objective The aim of this study is to perform a qualitative and quantitative analysis of the scientific literature regarding the use of acupuncture and laser acupuncture in the treatment of pain associated with temporomandibular disorders (TMDs). The aim of this article was to assess the clinical evidence for acupuncture and laser acupuncture therapies as treatment for temporomandibular joint disorder (TMD). Materials and methods This systematic review includes randomized clinical trials (RCTs) of acupuncture and laser acupuncture as a treatment for TMD compared to other treatments. Systematic searches were conducted in 3 electronic databases up to July 2023; PubMed, EMBASE, and SCOPUS databases. All RCTs of acupuncture for TMD were searched without language restrictions. Studies in which no clinical data and complex interventions were excluded. The Cochrane risk of bias tool (RoB 2) tool was employed to analyze randomized controlled trials. A Meta-analysis was performed in order to investigate a quantitative analysis comparing acupuncture and laser acupuncture to placebo. Results A total of 11 RCTs met our inclusion criteria. The findings show that acupuncture is short-term helpful for reducing the severity of TMD pain with muscle origin. Meta-analysis revealed that the Acupuncture group and Laser Acupuncture group had a higher efficacy rate than the Placebo control group, showing a high efficacy of Acupuncture and Laser Acupuncture group in the treatment of temporomandibular. Conclusions In conclusion, our systematic review demonstrate that the evidence for acupuncture as a symptomatic treatment of TMD is limited. Further rigorous studies are, however, required to establish beyond doubt whether acupuncture has therapeutic value for this indication. However high efficacy of Laser Acupuncture in the treatment of temporomandibular disorders was reported.

Abstract Introduction Temporomandibular disorder (TMD) is a multifaceted condition impacting the chewing system, with its frequency varying across different age groups and showing a higher incidence in women. The involvement of estrogen in TMD has been examined due to the presence of estrogen receptors in the TMJ area. However, the exact effect of estrogen on TMD is complex. During pregnancy, marked by significant hormonal fluctuations, the impact on TMD has been hypothesized but remains unclear due to inconsistent results from various studies. Methods In this cross-sectional study, we enrolled 32 pregnant women consecutively. We gathered information on demographics, TMD evaluations (using the Graded Chronic Pain Scale, Jaw Functional Limitation Scale-20, and Oral Behaviors Checklist), and mental health assessments (including Patient Health Questionnaire-9, Patient Health Questionnaire-15, and Generalized Anxiety Disorder-7). We employed descriptive statistics to summarize continuous and categorical data and used t-tests and chi-square tests for comparisons. We also conducted multivariate linear regression, adjusted for demographic factors, to investigate correlations. Results The study group mainly consisted of women aged 30–35 (40.6%) and 25–30 (18.8%). Most participants had completed high school (50%) and were married (71.9%). A notable association was found between younger women (under 30) and higher levels of somatic symptoms (p = 0.008) and generalized anxiety (p = 0.015). Women in their second trimester showed lower severity of somatic symptoms (p = 0.04). A significant link was also observed between depression severity and somatic symptom severity (p = 0.01). However, we found no significant correlations with other TMD-related health aspects. Discussion Our study identified significant associations between psychosomatic and psychological symptoms with variables like age and pregnancy trimester in pregnant women. However, it notably failed to establish a clear relationship between pregnancy-related factors and the severity of temporomandibular disorders (TMD). More comprehensive studies with larger participant pools are necessary to further validate and expand these findings.

Abstract Background Estrogen replacement therapy (ERT) is a common hormonal treatment for postmenopausal women, aimed at alleviating menopausal symptoms and reducing the health risks associated with estrogen deficiency. However, the impact of ERT on temporomandibular disorders (TMDs) remains unclear. This systematic review aims to evaluate the relationship between ERT and TMDs, including TMD occurence, pain, and associated symptoms. Methods A comprehensive search of seven electronic databases was conducted using predefined search terms and Boolean operators. Inclusion criteria encompassed studies examining the association between ERT and TMDs. Two independent reviewers screened the identified articles, extracted data, and assessed the risk of bias using the RoB -2 tool. Results Search strategy identified a total of 3 articles which met the inclusion criteria. The included studies investigated the impact of ERT on TMD occurrence and its related symptoms. The analysis revealed no significant association between ERT and TMD occurrence. A significant dose relationship was noted in one of the studies while another mentioned the possible relationship of TMD with educational status. Risk of bias among the studies was low, and the overall quality of evidence was deemed to be high. Conclusion This systematic review suggests that there is no conclusive evidence supporting an increased risk of TMDs among women receiving ERT. The findings indicate that ERT is unlikely to have a noticeable impact on TMDs. However, due to the limited number of studies available, further research is warranted to strengthen these conclusions and explore potential factors that may influence the relationship between ERT and TMDs.

Abstract Background Bruxism, a common oral parafunctional behavior characterized by the grinding or clenching of teeth, is a multifactorial condition with potentially detrimental effects on oral health and overall well-being. In recent years, there has been growing interest in understanding the relationship between bruxism and alcohol abuse, as both are prevalent issues that may share underlying factors and exacerbate each other. This systematic review, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement, aims to evaluate the frequency of bruxism among individuals with alcohol abuse. Methods A comprehensive search of electronic databases, including PubMed, Lilacs, Scopus and Web of Science, will be conducted to identify relevant studies published up to the knowledge cutoff date in January 2023. The search strategy will include keywords related to bruxism, alcohol abuse, and their synonyms. Inclusion criteria will encompass original research studies, such as observational, cross-sectional, cohort, and case-control studies, as well as clinical trials, that examine the relationship between bruxism and alcohol abuse. Two independent reviewers will perform the study selection, data extraction, and quality assessment, with discrepancies resolved by consensus. Results The systematic review will present a summary of the identified studies, including the study design, characteristics of the study populations, and key findings related to the association between bruxism and alcohol abuse. The potential mechanisms underlying this relationship will also be explored. Subgroup analyses and the quality of evidence will be assessed. Finally, the implications of this association for clinical practice and further research will be discussed. Conclusions This systematic review will contribute to a better understanding of the interplay between bruxism and alcohol abuse, shedding light on potential risk factors, mechanisms, and clinical implications. The findings may have significant implications for the prevention, management, and treatment of bruxism, particularly in individuals with a history of alcohol abuse.

Abstract Monocytes and their macrophage progeny are thought to be involved in tissue and alveolar bone destruction in periodontal disease. It has been documented that the proportion of (CD14 + CD16+) non-classical monocytes in the blood are elevated in chronic periodontitis;A total of 20 chronic generalized periodontitis patients who were otherwise healthy, were recruited for this study. At baseline and 3 weeks after non-surgical periodontal treatment, peripheral blood was obtained to assess the levels of C-reactive protein (CRP) and the proportion of monocyte subsets. Monocyte subsets were assessed using flow cytometry;The mean percentage of CD14 + CD16+ non-classical monocytes in the peripheral blood sample at baseline was 13.95 + 2.09, that reduced to 8.94 + 1.23 3 weeks after non-surgical treatment. A distinct significant reduction in the percentage of non-classical monocytes and a concomitant increase in classical monocytes were observed following periodontal treatment compared to baseline. There was a significant reduction in the all the periodontal parameters and CRP levels 3 weeks post non-surgical periodontal treatment. A positive correlation between CRP and percentage of non-classical monocytes was also observed; Periodontal treatment potentially modulates the host response effectively.

Abstract Background In dentistry, there is a growing preference for computer-aided design and computer-aided manufacturing (CAD/CAM) systems over traditional laboratory procedures. However, there is not much literature comparing various CAD/CAM materials. Thus, this study aimed to assess and compare the color stability and hardness of gingival and tooth colored milled and 3D-printed acrylic resins. Materials and methods Four types of CAD/CAM materials were prepared: 3D-printed pink shade (PP), milled polymenthymethacrylate (PMMA) pink shade (MP), 3D-printed tooth shade (PT) and milled PMMA tooth shade (MT) (n = 6). For hardness, disc shaped samples of 15 mm × 2 mm and for color stability, bar shaped samples of 65mmx10mmx2.5 mm were prepared and polished. Vickers hardness test was performed in a microhardness tester. Color stability test was done by immersing in coffee solution and coca cola for 7 days. Day 0 and day 7 measurements were recorded using a digital spectrophotometer and the change in color was calculated. For statistical analysis, one-way ANOVA and Tukey’s post hoc tests were done. Results For color stability, milled PMMA was superior to 3D-printed resin samples. Milled pink and tooth shade samples had similar color stability, whereas 3D-printed tooth shade samples were more color stable as compared to pink shade 3D-printed samples. For hardness, milled tooth shade PMMA was the most superior one, followed by 3D-printed tooth shade, whereas pink shade milled PMMA and 3D-printed resin samples had similar hardness values and were inferior to the tooth shade CAD/CAM materials. Conclusion Color stability of milled PMMA is superior to that of 3D-printed resins. Hardness of tooth shade milled and 3D-printed resins is more than that of pink shade milled and 3D-printed resins.