Search

Purpose Kocher-Langenbeck (K-L) approach is widely used in surgery of posterior wall fracture of acetabulum. However, challenges are frequently encountered in fractures involving the superior dome due to its short of view. We aimed to evaluate the efficacy of digastric trochanteric flip osteotomy (DTFO) in the K-L approach for high posterior wall acetabular fracture (HPWF). Methods From January 2014 to December 2016, 39 patients who suffered high posterior wall fracture (HPWF) were included in this retrospective study. All the patients were divided into two groups according to surgery type (17 standard K-L approach (control group), 22 with DTFO (DTFO group)). The Matta criterion was used to evaluate the accuracy of reduction according to post-operative CT image, while modified Harris hip score and 12-item short-form health survey (SF-12) were applied to measure the clinical outcomes. Results The median follow-up period was 55 (45 to 62.5) months. Blood loss and operation time were similar between the two groups. DTFO group achieved much more anatomical reduction than the control group (54.6% vs. 35.3%; OR, 2.2; 95% CI, 0.6 ~ 8.08). Significantly better functional outcomes were found in the DTFO group (10% higher points than the control group, p p = 0.07). Conclusions Compared with the traditional K-L approach, the intraoperative DTFO technique enabled better quality of reduction in patients with HPWF, thus ensuring superior clinical outcomes.

Deltoid ligament reconstruction following type B ankle fractures continues to generate a vivid discussion amongst trauma surgeons. There is a difference of opinion as to whether operative or non operative treatment should prevail. We therefore conducted a prospective comparative cohort study to determine whether it is necessary to routinely repair the injured deltoid ligaments. 41 Type B ankle joint fracture patients were enrolled, all the patients were associated with deltoid ligament ruptures and lateral/posterior-lateral dislocation of talus. After fixation of the lateral malleolus fracture, 12 patients were treated by superficial deltoid ligaments repairing, 16 patients with deep components augmentation, 13 patients had no direct surgical intervention. In the deep components group, the planter and the dorsi flexion was 3.2° (0-10°) and 8.8° (0-15°) less than the normal side. In the superficial components group, plantar and dorsi flexion was 0.8° (0-5°) and 4.2° (0-15°) less than the normal side. In the non-repairing group, the plantar and dorsi flexion was 2.4° (0-10°) and 5.6° (0-20°) less than the normal side. Overall, no significant statistical difference was observed comparing the 3 groups. In addition, no statistically significant inter-group differences were evident in terms of measurement of the ankle medial clear space and the clinical and functional outcomes recorded. In conclusion, the results of this study do not support routine exposure and repairing of the injured deltoid ligaments.

There is little information on the cost and outcome of different treatments for femoral neck fractures. This study aimed to evaluate the cost-effectiveness of internal fixation compared with hemiarthroplasty (HA) for elderly patients with displaced femoral neck fractures.A total of 121 patients ≥ 65 years old were divided into internal fixation (n = 58) or HA group (n = 63). Clinical outcome was evaluated by the EuroQol 5 dimensions (EQ-5D) score at 3, 12, and 24 months. The total costs including medical and non-medical expense were collected through hospitalisation information, cost diaries, and telephone interviews. A cost-utility analysis of the total costs in combination with quality-adjusted life years (QALYs) calculated by EQ-5D and survival time was conducted. Results were expressed in incremental cost-effectiveness ratio (ICER).The mean EQ-5D index score in the HA group were higher at the early follow-up (p0.05). At 24 months there were no differences in EQ-5D between the 2 treatment groups (p0.05). Over the 2-year period, patients treated with HA gained 0.09-0.10 more QALYs than those treated with internal fixation, while the mean total costs for internal fixation (CNY 55,676) were significantly lower than for HA (CNY 80,297) (P0.001). ICER indicated that internal fixation may be more cost-effective than HA.HA is associated with better outcome than internal fixation in the treatment of displaced femoral neck fractures in elderly patients. However, internal fixation may be more cost-effective because of less total cost.

The failure of osteoporotic fracture after internal fixation is mainly caused by the underlying bone loss and strength compromise. The aim of this study is to investigate whether absorbable internal fixation can provide adequate mechanical stability and a reduction in the incidence of failure of fixation caused by bone loss and stress shielding.A low density cancellous bone model was selected to compare the insertion of screw (screw-in), removal of screw (screw -out) and pull - out strength of absorbable screw and metal screw. The long bone model of thin cortical bone was used to create the transverse fracture model. The model was fixed with absorbable plate-screw system and metal plate-screw system respectively. The fatigue test and static bending test were compared. Moreover, the size of screw hole area was assessed.The maximal screw - in and screw - out torque of the absorbable screw was significantly greater than that of the metal screw (P 0.05), but there was no significant difference in pull-out test (P 0.05). No visible failure occurred in fatigue test. There was no significant difference between the maximum load of static bending test (P 0.05). The screw hole area of absorbable samples was significantly smaller than that of metal samples (P 0.05).In this experimental set-up it was found that the stability of absorbable screws in osteoporotic bone was better than metal screws. The absorbable system tested can achieve good stability, and the destruction of osteoporotic bone is small, which can reduce the occurrence of bone failure. Considering that absorbable material avoids the need of second surgery (implant removal) and reduces the stress shielding effect, we believe that absorbable internal fixation can be considered for fixation treatment of osteoporotic fractures.

This study retrospectively evaluated patients with ankle fracture to compare the prognosis between patients who had primary repair of the superficial deltoid ligament and those who did not. A total of 71 patients with ankle fracture and fracture-dislocation combined with deltoid ligament injury were divided into 2 groups: repair of superficial layer group (33 cases) and nonrepair group (38 cases). For the repair group, patients first underwent open reduction and internal fixation of the lateral malleolus and received a stress test. If the syndesmosis was widened, it would undergo fixation of the syndesmosis with screws. If instability of the ankle joint was observed, patients might further undergo repair of the superficial deltoid ligament. Ultimately, postoperative functions were evaluated using the Philips and Schwartz scale. All patients achieved bony union without significant pain. In the repair group, plantar and dorsi flexions were 2.5 ± 4.2° (range 0 to 10) and 7 ± 7.1° (range 0 to 20) less than the normal side, respectively. In the nonrepair group, the plantar and dorsi flexions were 2.8 ± 4.6° (range 0 to 10) and 6.6 ± 5.9° (range 0 to 20) less than the normal side. Meanwhile, the Philips and Schwartz scores of the repair and nonrepair groups were 92.5 ± 4.4 (range 80 to 100) and 93.4 ± 3.8 (range 85 to 100), respectively. But the difference of prognosis between the 2 groups was not statistically significant. In conclusion, for ankle joint fracture combined with deltoid ligament injury, routinely exploring or repairing the deltoid ligament was not recommended, but repair of the deltoid ligament increased stability of the ankle joint in the early postoperative stage.

In the original publication, the following authors have been omitted due to a technical error in the original article.

To establish a preoperative deep venous thrombosis predictor score for patients with fresh lower extremity fractures by statistical analysis.From January 2011 to December 2012, 1 705 patients with fresh lower extremity fractures were admitted to department of orthopaedic trauma, Beijing Jishuitan Hospital. They were randomly divided into two groups, the group 1 (n = 879) was used to screen risk factors and derived a predictive models based on logistic regression, the group 2 (n = 826) validated the models.Among the patients, there were 1 106 male and 599 female patients, with an average age of (50 ± 18) years.Variables related to preoperative deep venous thrombosis were age, length of time before surgery, cause of injury, low/high-energy injury, location of injury, history of cardiovascular and cerebrovascular diseases, and D-Dimer. The scores based on OR were: age ≤ 35 years: 1 point,35-65 years: 4 points, ≥ 65 years: 6 points; length of time before surgery,8 days:1 point, ≥ 8 days:2 points;low-energy injury:1 point, high energy injury:3 points;location of injury, foot and ankle:1 point, calf:3 points, around the knee: 5 points, femoral diaphysis and proximal femur:7 points, pelvis and acetabulum:4 points, ≥ 2 sites:6 point;history of cardiovascular and cerebrovascular diseases, yes:2 points, no:1 point. D-Dimer600 µg/L:1 point, ≥ 600 µg/L:3 points. Area under receiver operating characteristic curve was 0.79, critical point 15.5 points, sensitivity was 77.00%, specificity was 68.17%.The score can predict the preoperative deep venous thrombosis for patients with fresh lower extremity fractures, but limited.

Background: Old pelvis fractures are among the most challenging fractures to treat because of their complex anatomy, difficult-to-access surgical sites, and the relatively low incidence of such cases. Proper evaluation and surgical planning are necessary to achieve the pelvic ring symmetry and stable fixation of the fracture. The goal of this study was to assess the use of three-dimensional (3D) printing techniques for surgical management of old pelvic fractures. Methods: First, 16 dried human cadaveric pelvises were used to confirm the anatomical accuracy of the 3D models printed based on radiographic data. Next, nine clinical cases between January 2009 and April 2013 were used to evaluate the surgical reconstruction based on the 3D printed models. The pelvic injuries were all type C, and the average time from injury to reconstruction was 11 weeks (range: 8-17 weeks). The workflow consisted of: (1) Printing patient-specific bone models based on preoperative computed tomography (CT) scans, (2) virtual fracture reduction using the printed 3D anatomic template, (3) virtual fracture fixation using Kirschner wires, and (4) preoperatively measuring the osteotomy and implant position relative to landmarks using the virtually defined deformation. These models aided communication between surgical team members during the procedure. This technique was validated by comparing the preoperative planning to the intraoperative procedure. Results: The accuracy of the 3D printed models was within specification. Production of a model from standard CT DICOM data took 7 hours (range: 6-9 hours). Preoperative planning using the 3D printed models was feasible in all cases. Good correlation was found between the preoperative planning and postoperative follow-up X-ray in all nine cases. The patients were followed for 3-29 months (median: 5 months). The fracture healing time was 9-17 weeks (mean: 10 weeks). No delayed incision healing, wound infection, or nonunions occurred. The results were excellent in two cases, good in five, and poor in two based on the Majeed score. Conclusions: The 3D printing planning technique for pelvic surgery was successfully integrated into a clinical workflow to improve patient-specific preoperative planning by providing a visual and haptic model of the injury and allowing patient-specific adaptation of each osteosynthesis implant to the virtually reduced pelvis.

Early and accurate assessment of unstable pelvic fractures decreases mortality and morbidity by improving the outcomes of closed reduction surgery. In some circumstances (such as in developing countries or in acute trauma), accurate computed tomography (CT) 3D reconstructions are difficult to obtain and plain radiography must be relied upon for surgical planning. Therefore, a simulation model of pelvic displacement was evaluated as a basis for improving the assessment of pelvic fracture displacement from plain radiography images. The simulated model was based on a modified anteroposterior (AP) view of the pelvis constructed using anatomical data. Plain radiography imaging data of sagittal 20 ° hemipelvic rotation, similar to that observed in trauma, was obtained from the simulated model and were compared with normal pelvic rings from 10 cadaveric specimens (actual model). For each data set, the anterior superior iliac spine and ipsilateral pubic symphysis were measured on both sides. There was no significant difference between pelvic sides in the simulated and actual models (P = 0.870). Furthermore, no significant difference was found between the rotational degree of each pelvis based on calculated or simulated degrees and the 20 ° rotational angle (P = 0.322). A simulation model based on plain radiography of pelvic displacement could contribute to the optimal surgical management of unstable pelvic fractures without relying on CT.